NEGATIVE PRESSURE TMS TENTCOMMERCIAL DESCRIPTION

TMS tents share the basic TM shelter concept and equips it with increased internal usable space using a variant-walled frame design.The shelter enjoys the TM shelter’s zero-MHE, rapid set-up and easy principle of build.

TECHNICAL DESCRIPTION

SET-UP IN LESS THAN 5 MINUTES

- 30°C

+ 70°C

► Standard configuration :➢ Frame color : black➢ Main canvas color : white, sand or NATO green➢ Ground sheet color : green (for green tents) or grey (for white

or sand tents)➢ Dors : 1.80 m-wide➢ Bavettes de connexion➢ Windows : 80 x 60 cm with cristal and velcro privacy shutter➢ Ground sheet fixed by velcro and straps➢ Hanging net (black)➢ Access sleeves : 45 cm diameter (x2)➢ Waterproofing flap

► Storage :Frame and canvas are stored in transport bags.These bags have 6 handles and could be moved with forklift.

► Dimensions available :➢ TMS 18 : 18 m²➢ TMS 36: 36m²➢ TMS 54 : 54 m²

The TMS tents are made of resistant and quality materials.

FILTRATION UNIT FOR CONNECTION TO AN AIR CONDITIONER

TMS TENTSSince its launch in 2013, this design has seen increasing interest amongst the

military sector

► Bars and mechanical connecting parts made of anodisedaluminium alloy covered with epoxy paint.Eyelets, toggles, hooks and screws made from hot-dipgalvanized steel.

● Main canvas manufactured from 500 g/m² polyester materialcoated with PVC on both sides.Canvas composed of several widths assembled by highfrequency electric welding.

HIGH QUALITY MANUFACTURING

CSE box for HE or THE filters or active carbons(x1)➢ CSE box, 2.5 mm welded steel construction, welded with 10%

impermeability resistance➢ Acid-resistant epoxy powder coating (RAL 6014)➢ Operating temperature : 100°C continuous➢ With 2 Dp plugs, filter fixing by 2 stainless steel cams 304L (for CGD

filter 610 x 610 x 292)➢ Dimensions : 690 x 690 x 670➢ Manufacturing under QMOS according to NF EN 15614-1:2017 -

Qualified welders according to NF EN ISO 9606-1:2017➢ The box is approved for earthquake resistance.

Hermetic connection seal (x2)➢ One-piece EPDM gasket kit sealing connection between the CSE safety box and the register, manifold or duct,

adhesively bonded on one side➢ Delivered with unloosing stainless A2 steel (304L) bolts and nuts.➢ Operating temperature : 100 ° C continuous➢ Dimensions : 685 x 685 x 5

CSE box fixing accessory(ies) (x1) (OPTIONAL) :➢ 4 feet on plates welded into the CSE box or into the manifold H = 500 mm or according to drawing BPE➢ Acid-resistant epoxy powder coating (RAL identical to box)

Manifolds for inlet/outlet of 1 CSE box (x1) :➢ Pair of connection manifolds, hermetic 2 mm welded steel construction➢ Acid-resistant epoxy powder coating (Ral 6014)➢ Operating temperature : 100 ° C continuous➢ Dimensions : 690 x 690 x 200

E10> U15 filter(s) (LE) (x1):➢ CGD filter, H14 (99,995% MPPS) efficiency according to EN 1822-1➢ 100% incinerable polyester frame resistant to acids and solvents➢ Equipped with glass microfibre media, nominal flow rate 3400m³/h, Dpi: 274 Pa, Dpf: 600 Pa➢ Filtering surface : 36m²➢ Max. temperature : 80 ° C➢ Weight : 13 Kg➢ Filter according to NF EN ISO 16170 November 2016 (ex NF X44-011) and delivered with certificate according to DIN

1822/4.➢ Dimensions : 610 x 610 x 292

Manometer (x1):➢ Dial manometer type MAGNEHELIC 600 series 2000➢ Green zone : 0/600➢ Red zone : 600/1000

Manometer support (x1):➢ MAGNEHELIC 2000 series steel support kit➢ Acid-resistant epoxy powder coating (RAL identical to box)➢ Removable fixed between the flanges of the CSESE2966 box➢ Delivered with 1 meter of 5x8 crystal tube

Intervention bag for non-contact filter replacement (x1):➢ SVN bags made of fire retardant soft PVC M1 (20/100), color : pink➢ With Ø 8 mm sealing ring for CSESE2936 and CSESE2966 boxes➢ For filter with following dimensions: 305/610 x 610 x 292 (recommended use above +15° C)➢ Dimensions : 1000 x 2000

DEPRESSURISATION UNIT FROM 500 TO 2000 M3/HOUR

Box with 1 fan (x1):➢ CSESEM2966 box, 2.5 mm welded hermetic black sheet metal construction➢ 1 fan (230/240 V single-phased - 50 Hz) EU311 TYPE EU311➢ 2000 m3/ h flow rate under 1083 Pa of total pressure with 1,1 Kw 2830 tr/min motor➢ Placed on 4 Ø 125 wheels with brakes, polyurethane rubber➢ 4 lifting handles➢ The entire box is powder-coated in RAL 6014➢ Dimensions (H x W x L): 1210 x 650 x 1450 mm

IP55 box (x1):➢ Direct start-up with main switch➢ 1 DEM DIRECT 1,1 - 1,5 Kw (230 V Single-phased - 50 Hz - 6,3> 10 A) IP55 + MA / AT + DISJ➢ Electrical connection and direct starter tests➢ DEM + VAR electrical connection

CSE box outlet grating (x1):➢ Acid-resistant epoxy powder coating (RAL 6014)➢ Welded corners➢ Dimensions: 690 x 690

CSE box inlet grating (x1):➢ Inlet manifold, 2 mm hermetic welded steel

construction➢ Acid-resistant epoxy powder coating (RAL 6014)➢ Duct entry on Ø 300 mm box + BT - "Flat" version➢ Dimensions : 690 x 690

E10> U15 filter(s) (THE) (x1):➢ CGD filter, H14 (99,995% MPPS) efficiency according to EN 1822-1➢ 100% acid and solvent-resistant incinerable polyester frame➢ Equipped with a microfibreglass support, nominal performance 3400m3 / h, Dpi: 274 Pa, Dpf: 600 Pa,➢ Filtering surface : 36m2 / T ° max. 80 ° C / Weight : 13 Kg➢ Filter according to standard NF EN ISO 16170 of November 2016 (ex NF X44-011) and delivered with certificate

according to DIN 1822/4.➢ Dimensions : 610 x 610 x 292

Manometer (x1):➢ Dial manometer MAGNEHELIC 600 series 2000 type➢ Green zone : 0/600 / Red zone : 600/1000

Manometer support (x1):➢ MAGNEHELIC 2000 series steel support kit➢ Acid-resistant epoxy powder coating (RAL identical to box)➢ Removable fixed between the flanges of the CSESE2966 box➢ Delivered with 1 meter of 5x8 crystal tube

Intervention bag for non-contact filter replacement (x1):➢ SVN bags made of fire retardant soft PVC M1 (20/100), color : pink➢ With Ø 8 mm sealing ring for CSESE2936 and CSESE2966 boxes➢ For filter with following dimensions: 305/610 x 610 x 292 (recommended use above +15° C)➢ Dimensions : 1000 x 2000

MAGNEHELIC MANOMETER

► Low differential pressure gauges for air and neutral gases► The Magnehelic® principle, frictionless movement, is the guarantee that allows

the indication of low pressures, depressions, differential air pressures or neutral non-corrosive gases. Resistant to shocks, vibrations and overpressure, no manometric fluid or batteries, so there are no problems of leakage, evaporation, freezing, positioning or level

► Magnehelic® differential pressure gauges are designed to measure static pressures, liquid levels, gas flow velocity (with Pitot tube), air velocity, etc ... These are just a few of the many fields of application: construction of fans and air filters, air conditioning systems, building management, dust collectors, level measurement (bubbles), cleaning systems, dust collectors, aeronautics technology, automotive testing, oxygen devices, respiratory research.

► Standard accessories: Slot connectors for crystal tube 4/6 and threaded plugs for unused connectors, 3 supports and screws for flush mounting and 3 short screws for surface mounting.

► Description: Compatible and non-combustible air and gases.► Ambient temperature: -7 to + 60° C.► Test pressure: -680 mb to + 100 kPa.► Accidental overpressure: 170 kPa.► Connections: 1/8 nptf (2 pairs)► Box : Extruded aluminium, anti-corrosion treated and painted.► Accuracy at 21° C: ± 2% PE, 2000-60 Pa: 4% and 100 Pa: 3%.► Weight: 510g

AIR CONDITIONER 400V / 3 / 50 Hz

► Cooling capacity : 10,2 kW

► Maxi ambient temperature of use : +55°C

► Compatible with all types of tents

► Standard wheels and thermostat

► Optimised design for transport by container

► Several options available

TECHNICAL CHARACTERISTICS

■ Operating temperature :

● Cooling mode :(+ solar radiation 1,12 kWm²)

● Heating mode (OPTION) :

■ Storage temperature :

■ Minimum sound level at 5m :

from +20°C to +55°C

from -25°C to +20°C

from -25°C to +70°C

58 dB(A)

THERMAL CHARACTERISTICS

■ Refrigerant :■ Cooling capacity:

at the air conditioner terminal at the nominal air flow @+35°C/+50°C

■ Heating capacity (OPTION) :■ Nominal treated air flow :

● High speed● Low speed

■ Fresh air intake :■ Compressor type :

R134A10,2 kW

6 kW

2 200 m³/h1 800 m³/h

NOScroll

ELECTRICAL CHARACTERISTICS

■ Power supply :

■ Maxi absorbed electrical power :

■ Maxi absorbed amperage :

(Soft start system in Option)

■ Electric connection cable lenght :

■ Thermostat cable lenght :

400V / 3 / 50Hz + N + T

7,3 kW

13,9 A

15 m

10 m

STRUCTURE

■ Structure material :

■ A reinforced design for use on any type of

terrain

■ Paint / finishing :

Aluminium

IR NATO green

ACCESSORIES

■ Number of ducts :■ Air ducts dimensions :

● Standard air ducts :● Not standard air ducts :

2

Ø315 mm x 5 mØ315 mm x 3 m

OPTIONS

■ Electrical heating : kW

■ Soft start system :

■ "2T" version (4 ducts Ø250 for 2 tents)

■ Diffusion duct 6 m or 8 m

■ Lateral duct support :

■ Sand color paint :

■ Housse de protection :

■ Wood box :

■ EPA filtration unit

DIMENSIONS

■ Overall dimensions (L x W x H) :

■ Gross weight (without ducts) :

1325 x 730 x 1000

165 kg

Schematic airflow

HANDLING

■ Concealable wheels■ Foldable handles■ Stackable■ Forklift■ Crane

TRANSPORT

■ Quantity per container 20' x 8' x 8'6" (with ducts) :

● Without ducts :● CTZ10H55 1T Ø315:● CTZ10H55 1T Ø315 + support gaines:● CTZ10H55 2T Ø250:

24201622