1

Curriculum Vitae

Name: Neeraj Mittal

Ph. No.: +91-7814636315 Current Location: Pune Email: neeraj.mittal2611@gmail.com

PERSONAL STATEMENT: A first class mechanical graduate with specialized skills in Crash Analysis domain using tools like

Hypermesh, Ls-Dyna, Oasys primer, Creo 2.0 and desire to work as CAE meshing engineer.

Examination Board/University Year of Passing %

B. Tech (Mech) G.Z.S Campus College of Engg. & Tech, Bathinda. 2016 65.4

12th PSEB, D.A.V Collegiate Sr. Sec. School, Abohar 2011 65.9

10th PSEB, Divine Light Public Sr. Sec. School, Abohar 2009 83.6

*Subjects of Special Interest: SOM, FEA

TECHNICAL BACKGROUND /TRAININGS / KEY SKILLS / CERTIFICATES

Training E1- Beginner, E2 – Intermediate, E3 - Expert, E4 – Master User, WIP – Work in progress

Domain Training

Crash Analysis Fundamental of vehicle crash, Bio-mechanics of Crash- occupant injury criteria, Crash Regulations (FMVSS 208,214, ECR R94, R95, EURO, US-NCAP), Abbreviated injury scale, Crash test dummies

(300Hrs) E2

(WIP)

Tools Training

HyperMesh Reviewing the geometry, geometry cleanup, de-featuring model, extracting mid-surface, meshing of 2D, 3D components, inspecting quality, applying connectors & contacts preparing deck for analysis

(900Hrs) E3 HyperView: - Post-processing D3-plot files, understanding behavior of part in

different load conditions. Hypergraph:-Interpreting results generated after solver run, correlating it

with part, comparing results with standards, extract .csv file. Ls-Dyna Dyna Basics, Contacts in Dyna, Materials in Dyna, Control Cards in Dyna, Error debugging. Deck Preparation Using LS-Prepost & solving.

(500Hrs) E3

OASYS PRIMER Deck Preparation, Assigning Contacts, Control Cards, Error debugging.

(250Hrs) E2

(WIP)

Ansys Applying boundary conditions, Linear static analysis, Post-processing and result interpretation

(100Hrs) E1

Creo 2.0 Part Design, Sheet metal Design, Surface Design, Assembly, Drafting.

(300Hrs) E2

(WIP)

Solidworks Part Design, Sheet metal Design, Surface Design, Assembly, Weldment, 3D modelling, Drafting.

(250Hrs) E2

Quality Tool GD&T (Symbols, GD&T rules. etc.) (20Hrs) E1

Design Processes

Six Sigma (Green Belt Certification) DMAIC Process

(40Hrs) E1

(WIP)

Productivity Tools

MS Office (300Hrs) E3

2

ACADEMIC PROJECTS

B. Tech Project

Title: Self Balancing Electric Unicycle Objective: To design an electrically driven personal commuter for short distance to avoid pollution

caused by vehicles.

Brief Procedure: Market research

Literature review

Designing electronic system

Designing mechanical system

Intimating electronic and mechanical systems to fabricate prototype of model

Tools Used: Solidworks, Ansys structural analysis, MS office. Benefits to the Society:

Reduction in pollution & road congestion.

Will revolutionize travel experience if adopted by Indian society.

SAE BAJA 2016

Title: Designing, Analyzing, Optimization & fabrication of All terrain Vehicle ( Baja-SAE 2016)

Role in Team: Team captain

Design and analysis of roll cage for different loading condition. To evaluate the suspension points on roll cage.

Tools Used: Solidworks, Hypermesh, Optistruct.

ELITE KARTING

‘15

Title: Designing, Analyzing, Optimization & fabrication of Go-Kart (ELITE KARTING 2015)

Role in Team: Team captain

Design and analysis of Go-Kart frame.

Market research.

Tools Used: Solidworks, Ansys structural analysis.

LIVE PROJECT AND WORK EXPERIENCE

Badve Auto Comps. Pvt. Ltd, Chakan,

Pune (1st Jan

2016 – 30 Apr 2016)

Designation: - Intern- Development Engineer

Project name: To increase the productivity of Head Pipe on Rough Boring Machine Scope: To reduce the cycle time of the process. Procedure: Evaluate the tack time. Record the cycle time of process involving in fabrication of

Head Pipe. Find the bottle neck operation. Modification in machine by increasing number of spindle and workstations.

Tools Used: MS Excel, AutoCAD, MS Word Benefits: Production per day is increased by 63%

IKSC Knowledge Bridge Pvt. Ltd, Pune.

(04-04-2016 to till date)

Designation: - Intern Product Verification - Crash Analysis

Meshing @ 600 hours

2D- meshing (2D meshing Bracket, Rear inner wheel house part, Floor Front CTR, B-

Pillar trim cover, C Pillar trim lower RH, Passenger Side Chassis Rail, Plastic component

door, Front LH door assembly, crush box) @400 hours

3D- meshing (Hub, Ac Knob, arm bracket, Crank shaft, Crank case, Engine Block)@200 hours

Analysis: Title: Side pole impact of LHS front Door of a car (Duration: 150Hrs)

Objective: To analyze the front LHS door of a car for a pole impact according to FMVSS 214.

Brief Procedure: Literature review, extracting mid-surface & geometry cleanup, meshing of with

crash quality criteria, removing of initial penetration & intersections, spot welds & connections are modeled, assigning appropriate materials, sectional properties and contacts, Boundary conditions are applied as per standards FMVSS 214 (Pole Impact) for both dynamic & quasistatic analysis. Debug run and analysis using LS-Dyna. Result interpretation, Force absorption and global energy curves generation. Tools Used: Hypermesh, Oasys-Primer, LS-Dyna, HyperView.

3

Title: Side pole impact of Full Vehicle Objective: To analyze the crashworthiness of vehicle side structure as per standard FMVSS 214

Brief Procedure: Literature review & going through different research papers. Ford Taurus car model

is taken from public domain. Deck preparation. Assigning boundary conditions as mentioned in standards. Debug run and analysis using Ls-Dyna. Result interpretation, Force absorption and global energy curves generation. Tools Used: Hypermesh, Oasys-Primer, LS-Dyna, HyperView.

Title: Roof Crush Analysis of Ford Taurus Car (WIP) Objective: To analyze the roof crush resistance as per standard FMVSS 216 Brief Procedure: Literature review. Ford Taurus car model is taken from public domain. Deck

preparation. Assigning boundary conditions as mentioned in standards. Debug run and analysis using Ls-Dyna. Result interpretation, Force absorption and global energy curves generation.

Tools Used: Hypermesh, Oasys-Primer, LS-Dyna, HyperView.

Title: Camouflage Tree structural analysis- Reliance Industries Objective: Determining the strength of the structure and failure criteria of bolts in 6m height artificial

tree due to extreme wind loading (180Kmph) as per standard IS 1161 and 2062 Brief Procedure: Wind load for the life of 25 years of the structure is calculated. Material of the pipe

and the base plate are decided from IS 1161 and 2062 respectively, Max stresses developed in the structure are well within the factor of safety of 1.64 and failure criteria of bolts is calculated and

matched with the results obtained using FEA. Benefits: Reliance uses Camouflage trees to provide free Wi-Fi facilities across India.

Title: FE Analysis of Saddle Actuator- UNO-MINDA (Duration: 50Hrs) Objective: To find out the cause of failure in the shaft of Saddle actuator and Design improvisation. Brief Procedure: Root-Cause analysis of why failure is occurring. Executing static, dynamic, impact,

modal and fatigue analysis. Comparing with the failure contour we concluded that the shaft was failing due to fatigue because of bending load it was experiencing during vibration, Redesigning for that failure criteria. Benefits to the company/Society: Increase in the lifespan of the product.

EXTRA-CURRICULAR ACTIVITIES, AWARDS AND MEMBERSHIPS Coordinator of college SAE CLUB.

Participated in ELITE KARTING 2015 & BAJA 2016 (TEAM VENOM).

Secured AIR 7th position in ELITE KARTING 2015.

Active member of NSS ( National Service Scheme)

DISC & 7 WORKPLACE DRIVER EVALUATIONS STRENGTHS

Problems / Tasks (Dominance)

Calculated risk

Questioning.

People (Influence)

Trustworthy

Friendly

Pace (Steadiness)

Consistent

Stable

Procedures (Compliance)

Accurate

Systematic

*Detailed report on DISC and 7 Workplace drivers available on request

HOBBIES & INTEREST Playing Chess

Knowledge Sharing

PERSONAL DETAILS Name : Neeraj Mittal Date of Birth : 26-11-1992 Sex : Male Nationality : Indian Languages Known : English, Hindi, Punjabi, and Marwari Permanent Address : H.no- C/17 Uttam Vihar Colony, Kandhwala Road, Abohar (Pb.) 152116

Place: Pune Date: 1/24/2017