Nebula High Output · Nebula™ High Output RoHS Compliant IP65 V1_July 2019_RS • It is...
2
company a Installation for Nebula™ High Output Downlight DALI/1-10V Warning and cautions • The light source of this luminaire is not replaceable: when the light source reaches the end of its life the whole of the luminaire must be replaced. • This luminaire is suitable for indoor use only. • It may be necessary to upgrade your MCBs to allow for increased inrush current. • DALI or 1-10V dimmable • DO NOT COVER the fitting with insulation as indicated by this symbol on the luminaire. INSTALLATION ENGLISH • Read the instructions and ensure that you have all of the tools and accessories required to complete the installation correctly. Isolate power supply before starting the installation. Nebula ™ High Output RoHS Compliant IP65 V1_July 2019_RS • It is recommended that luminaires are installed by a qualified electrician to ensure the installation complies with the local current wiring regulations. • Any broken or damaged parts should be replaced as soon as possible. JCC will not accept responsibility for claims arising from sub-standard installations. • It is recommended that the ambient room temperature should not exceed 30°C. • These products are designed for connection to a mains supply of 220-240V~ 50Hz. Specification Wattage Colour Temp Lumens LpcW 8W 3000K 770 97 8W 4000K 840 105 10W 3000K 820 82 10W 4000K 890 89 13W 3000K 950 73 13W 4000K 1200 92 Ra: 80 Finishes available: White only 8W 10W 13W Ø68-75MM Ø90-95MM Ø90-95MM Fig.1a Cut Out Size Installation 1. Cut the mounting hole in the ceiling. (JCC recommends that a sample hole is cut in a section of spare material to familiarize yourself with the process) see Fig.1a. 2. Connect the mains supply as indicated in Fig.2a & Fig.2b. and connect required dimming control as indicated above. 3. Place fitting into ceiling void (Fig.3). 4. Reconnect mains power supply and test for operation. 220-240V 50Hz / Class II Fig.2a Mains Input Dimming control input Plug & Play Connectors Important warranty information Nebula™ High Ouput is supported by a 2-year standard warranty which will extend to 5 years, if registered within the first year of purchase. Please register at jcc.co.uk/warranty - Terms and conditions apply. The installer will be asked to provide the following information, which is detailed on a label attached to the luminaire’s chassis: Product Code/Date Code. It remains the responsibility of the installer to ensure this product is suitable for it’s intended application, the product warranty will be void if installed in an area not suitable for this product. Fig.2b Fig.3 Double insulated no earth required LIVE = BROWN NEUTRAL = BLUE DALI DA DA 1-10V + -
Transcript of Nebula High Output · Nebula™ High Output RoHS Compliant IP65 V1_July 2019_RS • It is...
companya
Installation for Nebula™ High Output Downlight DALI/1-10V
Warning and cautions• The light source of this luminaire is not replaceable: when the light source
reaches the end of its life the whole of the luminaire must be replaced.• This luminaire is suitable for indoor use only.• It may be necessary to upgrade your MCBs to allow for increased
inrush current. • DALI or 1-10V dimmable• DO NOT COVER the fitting with insulation as indicated by this symbol
on the luminaire.
INSTALLATION ENGLISH
• Read the instructions and ensure that you have all of the tools and accessories required to complete the installation correctly. Isolate power supply before starting the installation.
Nebula™ High Output
RoHSCompliant IP65 V1_July 2019_RS
• It is recommended that luminaires are installed by a qualified electrician to ensure the installation complies with the local current wiring regulations.
• Any broken or damaged parts should be replaced as soon as possible. JCC will not accept responsibility for claims arising from sub-standard installations.
• It is recommended that the ambient room temperature should not exceed 30°C.
• These products are designed for connection to a mains supply of 220-240V~ 50Hz.
Specification
Wattage Colour Temp Lumens LpcW
8W 3000K 770 97
8W 4000K 840 105
10W 3000K 820 82
10W 4000K 890 89
13W 3000K 950 73
13W 4000K 1200 92
Ra: 80
Finishes available: White only
8W 10W 13W
Ø68-75MM Ø90-95MM Ø90-95MM
Fig.1a Cut Out Size
Installation
1. Cut the mounting hole in the ceiling. (JCC recommends that a sample hole is cut in a section of spare material to familiarize yourself with the process) see Fig.1a.
2. Connect the mains supply as indicated in Fig.2a & Fig.2b. and connect required dimming control as indicated above.
3. Place fitting into ceiling void (Fig.3). 4. Reconnect mains power supply and test for operation.
220-240V 50Hz / Class IIFig.2a Mains Input
Dimming control input
Plug & Play Connectors
Important warranty information
Nebula™ High Ouput is supported by a 2-year standard warranty which will extend to 5 years, if registered within the first year of purchase. Please register at jcc.co.uk/warranty - Terms and conditions apply.
The installer will be asked to provide the following information, which is detailed on a label attached to the luminaire’s chassis: Product Code/Date Code.
It remains the responsibility of the installer to ensure this product is suitable for it’s intended application, the product warranty will be void if installed in an area not suitable for this product.
Fig.2b
Fig.3
Double insulated no earth required
LIVE = BROWN
NEUTRAL = BLUE
DALIDA
DA
1-10V+
-
Profile & Dimensions
All dimensions in millimetres
8W Standard 10W & 13W Standard
Ø66
Ø80
40
Ø89
Ø110
64.3
Ø66
Ø80
30
Ø89
Ø110
49.5
8W Tilt 10W & 13W Tilt
JCC Lighting Products Ltd., Innovation Centre, Beeding Close, Southern Cross Trading Estate, Bognor Regis, West Sussex, PO22 9TS , United kingdom
Technical Support: +44(0)1243 838986 Customer Services: +44(0)1243 838999
jcc.co.uk
