NDP25/2 Magnetically coupled centrifugal pump

2
Leak free continuous operation For continuous transfer/recirculation of aggressive chemicals, chilled water, pure or precious liquids, in photographic, reprographic, X-Ray and industrial processing equipment, particularly where space is limited. Manufactured in chemical resistant thermoplastics - entirely non-metallic Zero maintenance Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to pumped fluids. Drip-proof IP22 motor housing Magnetically coupled centrifugal pump totton pumps Features 230V 1ph 50/60Hz Plain 21mm 110V 1ph 50/60Hz Plain 21mm 230V 1ph 50/60Hz 1 /2” BSP M 110V 1ph 50/60Hz 1 /2” BSP M NDP 25/2 Port Details NDP 25/2 Port Details Wetted materials Standard EPDM ‘O’ ring, optional Nitrile or Viton ® PP encapsulated magnet PP pump housing PPS option available Alumina ceramic spindle Principal applications NDP25/2

Transcript of NDP25/2 Magnetically coupled centrifugal pump

Page 1: NDP25/2 Magnetically coupled centrifugal pump

Leak free continuous operation

For continuous transfer/recirculation of aggressive chemicals, chilled water,pure or precious liquids, in photographic, reprographic, X-Ray and industrial

processing equipment, particularly where space is limited.

Manufactured in chemical resistant thermoplastics - entirely non-metallic

Zero maintenance

Magnetic couplings provide an energy efficient thermal shield,minimising heat transfer to pumped fluids.

Drip-proof IP22 motor housing

Magnetically coupledcentrifugal pump

������

�����

Features

230V 1ph 50/60Hz Plain 21mm 110V 1ph 50/60Hz Plain 21mm230V 1ph 50/60Hz 1/2” BSP M 110V 1ph 50/60Hz 1/2” BSP M

NDP 25/2 Port Details NDP 25/2 Port Details

Wetted materialsStandard EPDM ‘O’ ring, optional Nitrile or Viton®

PP encapsulated magnetPP pump housing

PPS option availableAlumina ceramic spindle

Principal applications

NDP25/2

Page 2: NDP25/2 Magnetically coupled centrifugal pump

NOTE: These magnetically coupled pumps are designed for use with clean fluids. Solids willcause jamming. Abrasives will reduce pump life & invalidate the warranty.

NDP pumps are not self priming & are not designed to run dry

Drawings not to scaleDimensions in millimetres

ModelOverallheight

mm

Overalllength

mm

Weightkilos

Max bodypressure

bar

Maxcapacitylitres/min

Maxhead

metres

Temprange

°c

*Maxspecificgravity

MotoroutputWatts

Overallwidthmm

-20°to

+85°

*assuming maximum viscosity 0f 30cp. Refer to the Company for higher viscosities & specific gravities

�����������

NDP

The company reserves the right to change specifications

phone+44 (0)23 8066 6685fax+44 (0)23 8066 6880

email: [email protected]. totton-pumps.co.uk

a division of Electric Motor Company Limited

25/2 100 171 112 1.5 1.4 1.2 1850Hz 27 2.2

60Hz 25 2.9

Performance Tested with clean cold water @ 20o c

He

ad

: m

etr

es

Flow rate: litres/minute

E.11.0804.05

NDP25/2

0

0.5

1

1.5

2

2.5

3

3.5

0 5 10 15 20 25 30

60Hz

50Hz