Nc Technology
-
Upload
hariskhan86 -
Category
Education
-
view
1.773 -
download
0
description
Transcript of Nc Technology
![Page 1: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/1.jpg)
NC TECHNOLOGY
![Page 2: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/2.jpg)
NUMERICAL CONTROLNumerical control (NC) refers to the automation of machine tools that are operated by abstractly programmed commands encoded on a storage medium
The first NC machines were built in the 1940s and '50s.
These early servomechanisms were rapidly augmented with analog and digital computers, creating the modern computer numerical controlled (CNC) machine tools that have revolutionized the design process.
![Page 3: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/3.jpg)
ANLOG OR DIGITAL NPUT
CNC MACHINE
FOR TURNING
OPERATIONS
CNC TURNING CENTRE
![Page 4: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/4.jpg)
SIEMENS CNC PANEL
![Page 5: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/5.jpg)
`
• PROGRAM OF INTRUCTIONS
• MACHINE CONTROL UNIT
• MACHINE TOOL OR OTHER CONTROLLED PROCESS.
BASIC COMPONENTS OF NC SYSTEM
![Page 6: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/6.jpg)
• It is the detailed step-by step set of directions which tells the machine tool what to do.
• It is coded in numerical or symbolic form on some type of input medium that can be interpreted by the controller unit.
• The most common input medium today is 1-inch wide. Input method can be manual or by means of direct link with a computer , called direct numerical control or DNC.
PROGRAM OF INTRUSTIONS
![Page 7: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/7.jpg)
• .
PUNCHED TAPE
SPROCKET HOLES
PROGRAM OF INTRUCTIONS
![Page 8: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/8.jpg)
• It is part of the NC system which performs useful work.
• It includes the cutting tools, work fixtures, and other auxiliary equipment needed in the machining operation..
MACHINE TOOL
![Page 9: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/9.jpg)
THE NC PROCEDURE• PROCESS PLANNING
• PART PROGRAMMING
• TAPE PREPARETION & VERIFICATION
• PRODUCTION
![Page 10: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/10.jpg)
PROCESS PLANNING
This step is referred to as process planning and it is concerned with preparation of route sheet.
The route sheet is a listing of the sequence of operations which must be performed on the work part.
![Page 11: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/11.jpg)
PART PROGRAMMING
Part programmer plans the process for the portions of the job to be accomplished by NC.
• They are responsible for planning the sequence of machining steps to be performed by NC and to document these in a special form.
![Page 12: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/12.jpg)
TAPE PREPATION AND VERIFICATION
A punched a tape is prepared from the part programmer’s NC process plan.
After the tape has been prepared, a method is usually provided for checking the accuracy of the tape
The “Acid Test” of the tape involves trying it in and out on the machine tool to make the part. A foam or a plastic material is sometimes used off this tryout.
![Page 13: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/13.jpg)
PRODUCTIONThe final step in the NC procedure is to use NC tape in
production.
This involves ordering the raw work parts, specifying and preparing the tooling and any specific fixturing that any be required and setting up the NC machine tool for the job.
When the part is completed the operator removes it from the machine and loads the next.
![Page 14: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/14.jpg)
NC CO-ORDINATE SYSTEM
• The purpose of cordinate system is to provide a means of locating the tool in relation to the workpiece.
• Depending on the NC machine, the part programmer may have several differnet options avalable for specfying this loaction.
![Page 15: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/15.jpg)
x
-x
-y
yz
-zMachine
table
![Page 16: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/16.jpg)
NC MOTION CONTROL SYSTEM
• point-to-point
• Straight – cut
• CONTOURING NC
![Page 17: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/17.jpg)
Point to Point
tool
workpiece
![Page 18: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/18.jpg)
workpiece
Cnc drill
![Page 19: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/19.jpg)
STRAIGHT CUT
tool
workpiece
![Page 20: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/20.jpg)
CONTOURING
![Page 21: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/21.jpg)
CONTOUR MADE BY A
CNC MACHINE ON
FOAM
![Page 22: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/22.jpg)
APPLICATIONS OF NUMERICAL CONTROL
• MOST WIDELY USED IN METAL CUTTING INDUSTRIES
• MILLING DRILLING,BORING,TURNING ,GRINDING AND SAWINGAND RELATED PROCESS.
![Page 23: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/23.jpg)
APPLICATIONS OF NUMERICAL CONTROL
• In addition to metal machining, numerical control has been applied to a variety of other operations..
• Press working machine tools,Cloth cutting,Automatic riveting,Wire-wrap machines,Welding machines,
• Inspection machines,Automatic drafting.
![Page 24: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/24.jpg)
ADVANTAGES
• Reduced non-productive time. • Reduced fixturing. • Reduced manufacturing lead time. • Greater manufacturing flexibility. • Improved quality control.
![Page 25: Nc Technology](https://reader034.fdocuments.us/reader034/viewer/2022051411/5466623eb4af9f5d3f8b53bd/html5/thumbnails/25.jpg)
DISADVANTAGES
• Higher investment cost. • Higher maintenance cost. • Finding and/or training NC personal