NBS PLUS MANUFACTURER’S PRODUCT PAGE · Web viewJointing: Internal joint strap bedded in...

BaileyEaves Products

Instructions:1. Use the product pages to amend the NBS Plus product entries for BaileyEaves Products.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.4. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.

NBS Plus contact details:Email: [email protected]: 0845 456 9594Address: NBS Plus Production NBS The Old Post Office St Nicholas Street Newcastle upon Tyne NE1 1RH

General Intoduction

Since 1975 Bailey Eaves Systems have built up an enviable reputation amongst architects, contractors and construction clients for manufacturing, high quality, aluminium eaves systems.Bailey are at the forefront of eaves design and have developed systems that make construction speedier and more cost effective, by value engineering the profiles without compromising performance or appearance. Today, bespoke designs are developed from standard systems by Bailey Eaves Systems, to provide quality eaves and cladding features that enhance and add value to a wide variety of buildings, whilst being swift and efficient to install.All Systems are manufactured to stringent quality control standards, from sheet and extruded aluminium, and are available in a variety of finishes which include polyester powder coating, PVDF and anodising.Finishes are to the highest quality low maintenance specification. Polyester powder coating is carried out at Bailey Eaves Systems in-house plant and is backed by Azko Nobel 30 years guarantee. Bailey Eaves Systems offer Free Flow Rate calculations for gutter/downpipe sizing and provide typical Dwg formatted drawings on request. Full, bespoke detailed eaves design is also available.For full technical literature and design assistance, please contact the Bailey Eaves Systems customer support team on 01403 261844 who would welcome your call.

Table of ContentsArundel Gutter Atlantic Monsoon Concealed Gutter Bamburgh Gutter Cassette Soffit System Aluminium Concealed Gutter Corfe Gutter Durham Gutter Cassette Eaves System Flush Fit Downpipes Round Flush Fit Downpipes Square I-Line Snap-On Feature Channel Kenilworth Gutter Laser-Line Carcassing System Lindisfarne Gutter C- Fix Coping System Stirling Gutter Traditional Downpipes Round Traditional Downpipes Square V Joint Soffit System

© National Building Specification Ltd

Generated by NBS on 20/8/2009 at 11:44:57

mailto:[email protected]


NBS PLUS MANUFACTURER’S PRODUCT PAGE

Manufacturer: BaileyEaves Currently there is no image attached to this product. If you would like to include an image please contact [email protected] for details.

Product name: Arundel Gutter

Jump to instructions

Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium ogee gutter system.

Product general description:Extruded aluminium ogee gutter system.

Profile approximates to traditional 'Moulded 46' cast iron gutters. Range of sections suitable for applications including large domestic, commercial and

industrial buildings. Gauge: 2 mm (3 mm for largest section). Fix using 25 mm x 12 gauge stainless steel screws. Direct fix to fascia at 600 mm centres, using stainless steel screws. Optional bracket fix. Jointing: Internal joint strap bedded in silicone mastic and secured using stainless steel bolts

with coated heads. Powder coated finish with choice of colour. Applied in-house with thirty year guarantee

available on application, subject to location. Compatible downpipes listed separately.

Product specification clause

Product reference:Arundel Gutter - This extruded aluminum gutter faithfully reproduces the shape of a the moulded 46 Ogee gutter which in cast iron was used on many traditional buildings. A range of sizes is offered so that there is a gutter suitable for all applications from large domestic to the biggest commercial and industrial buildings.

Product properties:• Layout:

As drawing ???• Section (nominal width x depth):

102 x 76 mm - External dimensions 104 x 76 mm.127 x 102 mm - External dimensions 130 x 100 mm.152 x 102 mm - External dimensions 155 x 100 mm.203 x 152 mm - External dimensions 203 x 146 mm.

• Outlet:63 mm diameter - Not available on sections 152 x 102 mm or 203 x 152 mm.76 mm diameter - Not available on sections 152 x 102 mm or 203 x 152 mm.102 mm diameter - Not available on section 102 x 76 mm.72 x 72 mm102 x 76 mm102 x 102 mm - Not available on section 102 x 76 mm.

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating.Syntha Pulvin, colour ???, gloss level ??? - Polyester powder coating.

• Accessories/ Other requirements:[And]External angle - Internal length: 75 mm each face.Internal angle - External length: 75 mm each face.Rafter brackets - Screw to end of rafters when no fascia is used.Stop end left - Gutter length: 46 mm.




Stop end right - Gutter length: 46 mm.

End of product specification clause

As standard: (use this box to describe the features of the product that are provided as standard)Plain gutter length:3 m.

Running outlet length:250 mm.

Finish:Consult supplier for colour choice.– Standard polyester powder coating: Interpon D1036, standard colour range.

Electrostatically applied to BS EN 12206 and Qualicoat Class 1 standards. Film thickness: 60µ (minimum 50µ).

Options: (use this box to describe the features of the product that are optional)Section:Indicative flow rates (maximum with central outlet): Roof areas are indicative maxima. Suitable outlet interval varies with local climate and other factors. Consult manufacturer.

– Gutter section 102 x 76 mm. Flow rate: 1.6 L/s. Outlet size 63 mm diameter. Flow rate: 2.4 L/s. Roof area: 115 m². Outlet size 76 mm diameter. Flow rate: 3.3 L/s. Roof area: 158 m². Outlet size 72 x 72 mm. Flow rate: 3.3 L/s. Roof area: 158 m². Outlet size 102 x 76 mm. Flow rate: 3.3 L/s. Roof area: 158 m².

– Gutter section 127 x 102 mm. Flow rate: 3.2 L/s. Outlet size 63 mm diameter. Flow rate: 2.4 L/s. Roof area: 115 m². Outlet size 76 mm diameter. Flow rate: 3.3 L/s. Roof area: 158 m². Outlet size 72 x 72 mm. Flow rate: 3.5 L/s. Roof area: 168 m². Outlet size 102 mm diameter. Flow rate: 5.3 L/s. Roof area: 254 m². Outlet size 102 x 76 mm. Flow rate: 5 L/s. Roof area: 240 m². Outlet size 102 x 102 mm. Flow rate: 5.7 L/s. Roof area: 274 m².

– Gutter section 152 x 102 mm. Flow rate: 3.7 L/s. Outlet size 76 mm diameter. Flow rate: 3.3 L/s. Roof area: 158 m². Outlet size 102 mm diameter. Flow rate: 5.8 L/s. Roof area: 279 m². Outlet size 72 x 72 mm. Flow rate: 3.6 L/s. Roof area: 173 m². Outlet size 102 x 76 mm. Flow rate: 5.4 L/s. Roof area: 260 m². Outlet size 102 x 102 mm. Flow rate: 6.8 L/s. Roof area: 327 m².

– Gutter section 203 x 152 mm. Flow rate: 7.5 L/s. Outlet size 76 mm diameter. Flow rate: 4.2 L/s. Roof area: 200 m². Outlet size 102 mm diameter. Flow rate: 7.5 L/s. Roof area: 360 m². Outlet size 152 mm diameter. Flow rate: 15 L/s. Roof area: 720 m². Outlet size 72 x 72 mm. Flow rate: 4.5 L/s. Roof area: 215 m². Outlet size 102 x 76 mm. Flow rate: 6.7 L/s. Roof area: 320 m². Outlet size 102 x 102 mm. Flow rate: 9 L/s. Roof area: 430 m².

Approvals: (use this box to list any third party product approvals, e.g. Kitemark and British Board of Agrément certificates)No approvals

Manufacturer notes [not for publication]:

© National Building Specification LtdGenerated by NBS on 20/8/2009 at 11:44:57

Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Arundel Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.

NBS Plus contact details:Email: [email protected]: 0845 456 9594Address: NBS Plus Production

NBSThe Old Post OfficeSt Nicholas StreetNewcastle upon Tyne NE1 1RH

Key:Within the "Product Specification Clause" section, the following notation is used:[-] This is an empty insert, into which a specifier can enter their own requirements (e.g. colour or size).[d] The value below this notation is the default value for a property, meaning that is selected automatically for the specifier.[And] More than one item from the values below this notation may be selected by the specifier.







Product name: Atlantic Monsoon Concealed Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Pressed steel concealed gutter system with membrane lining.

Product general description:Pressed steel box gutter system with seamless membrane lining.

Cost effective system with efficient flow and reliable rainwater disposal. Carrier: 0.6 mm / 1.2 mm / 1.5 mm steel, hot dip galvanized. Lining: 1 mm Atlantic polyolefine membrane, factory bonded to carrier. Light grey colour.

Thermally stable, highly durable, UV resistant. Section to suit building profile, generally rectangular or trapezoidal. Jointing: External joint strap riveted to carrier. Membrane coverstrip hot air welded internally. Compatible downpipes listed separately. Suitable for use within Bailey Fascias and Soffits as combined Eaves System. Detail design service available from supplier. Installation by recommended subcontractors.


Product reference:Atlantic Monsoon Concealed Gutter Bailey Atlantic Monsoon is a steel box gutter lined with a seamless modern polyolefine membrane. The result is a low cost, effective, factory fabricated rainwater disposal solution which when incorporated into an aluminium eaves assembly, provides the benefits of a polyolefine lining with the strength and cost effectiveness of steel.


As drawing ???• Section (w x h):

??? x ??? mmAs drawing ???

• Gauge:0.6 mm1.2 mm1.5 mm

• Outlet:76 mm diameter102 diameter150 diameter72 x 72 mm102 x 102 mm150 x 150 mm

• Finish:Upper surface: light grey membraneUnderside: self colour galvanised steel

• Supports:Brackets - Steel, galvanized finish, 6 mm gauge, at 0.6m centres, as standard option.Direct ??? - Self-supporting between two points of continuous structure.

• Other requirements:[And]None




External angle ???ºInternal angle ???ºExternal joint strapsStop end leftStop end rightOverflows


As standard: (use this box to describe the features of the product that are provided as standard)Plain gutter length:3 m, modular.

Options: (use this box to describe the features of the product that are optional)Section:

For estimated flow rates, required number, location and size of downpipes, consult supplier. Girth (maximum): 1.5 m. Total width of metal before pressing.



Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Atlantic Monsoon Concealed Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Bamburgh Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium half round gutter system.

Product general description:Extruded aluminium half round gutter system.

Choice of sizes and beaded or deep flow profile. Bracket fix to timber fascia at 1 m centres using 25 mm x 12 gauge stainless steel screws as

standard. Optional rafter fix. Jointing: Internal joint strap bedded in silicone mastic and secured using stainless steel bolts

with coated heads. Powder coated finish applied in-house. Consult manufacturer for choice of colour. Thirty year

guarantee available on application, subject to location. Compatible downpipes listed separately.


Product reference:Bamburgh Gutter A range of extruded aluminium half round gutters with beaded edges.The deep flow options fulfils the need for a high capacity half round system. Installed in fascia or rafter brackets jointing is achieved with internal butt strapps, with slots to allow for expansion, bolted through the sole making a very neat joint. Available in two half round sizes plus the deep flow option these gutters are normally supplied with outside face polyester powder coated ensuring an extremely long low maintenance life.


As drawing ???• Section (nominal width x depth):

112 x 55 mm - Thickness 2.25 mm. Beaded profile.125 x 59 mm - Thickness 2.4 mm. Beaded profile.125 x 102 mm - Thickness 2.5 mm. Deep flow profile.

• Outlet:63 mm diameter76 mm diameter102 mm diameter72 x 72 mm102 x 76 mm

• Finish:Anodized, colour ??? - Nonstandard option.Interpon D, colour ???, gloss level ??? - Polyester powder coating. Standard option.??? Powder coating, colour ???, gloss level ??? - Non standard option.PVDF, colour ??? - Nonstandard option.

• Other requirements:[And]External angle - Internal length: 100 mm, each face.Internal angle - External length: 100 mm, each face.Fascia brackets - Width: 30 mm. Use at 1 m centres.Rafter brackets, side fixRafter brackets, top fix, pitch ???º




Stop end left - Length: 50 mm, each face.Stop end right - Length: 50 mm, each face.


As standard: (use this box to describe the features of the product that are provided as standard)Gutter length:3 m.

Running outlet:Length: 250 mm.

Finish:– Standard polyester powder coating: Interpon D1036, standard colour range.



– Gutter section 112 x 55 mm. Flow rate: 0.81 L/s. Outlet size 63 mm diameter. Flow rate: 1.5 L/s. Roof area: 72 m². Outlet size 76 mm diameter. Flow rate: 1.6 L/s. Roof area: 77 m². Outlet size 72 x 72 mm. Flow rate: 1.6 L/s. Roof area: 77 m². Outlet size 102 x 76 mm. Flow rate: 1.6 L/s. Roof area: 77 m².

– Gutter section 125 x 59 mm. Flow rate: 1.13 L/s. Outlet size 63 mm diameter. Flow rate: 1.7 L/s. Roof area: 82 m². Outlet size 76 mm diameter. Flow rate: 2.2 L/s. Roof area: 105 m². Outlet size 102 mm diameter. Flow rate: 2.2 L/s. Roof area: 105 m². Outlet size 102 x 76 mm. Flow rate: 2.2 L/s. Roof area: 105 m².

– Gutter section 125 x 102 mm. Flow rate: 3.66 L/s. Outlet size 76 mm diameter. Flow rate: 3.3 L/s. Roof area: 158 m². Outlet size 102 mm diameter. Flow rate: 5.6 L/s. Roof area: 269 m². Outlet size 72 x 72 mm. Flow rate: 3.8 L/s. Roof area: 182 m². Outlet size 102 x 76 mm. Flow rate: 5.2 L/s. Roof area: 250 m². Outlet size 102 x 102 mm. Flow rate: 6.4 L/s. Roof area: 307 m².



Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Bamburgh Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.



5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Cassette Soffit System


Product summary: (a one sentence product description used to differentiate between similar products)Aluminium soffit panels with interlocking joints and secret fixing.

Product general description:Aluminium soffit panels with interlocking joints and secret fixing.

Panel stiffness and flatness is ensured by interlocking joints on all edges, lateral stiffeners attached to back of panel and choice of metal gauge to suit panel width.

Complete system includes Bailey Support Carcassing for suspension from primary building structure, ensuring correct alignment and adjustability.

Panels typically span between Carcassing fixing points with long axis parallel to building elevation. Other support arrangements are feasible.

Supplied in 3 m lengths as standard. Optimum widths are: 0.6 m, 0.83 m and 1 m (maximum). Choice of special sizes, shapes, flat or curved section.

Powder coated finish with choice of colour. Applied in-house with thirty year guarantee available on application, subject to location.

Interlocking joints compatible with Bailey Fascia System. Suitable for use with Bailey Carcassing or Laser-Line Carcassing Systems. Detail design service available from supplier. Installation by recommended subcontractors.

Fixings: Aluminium rivets and stainless steel self-drill and tap screws. Typically at 0.6 m centres, but consult supplier for individual project specification.


Product reference:Cassette Soffit System Bailey Secret Fix Cassette System allows designers to bring distinctiveness and individuality to a wide range of modern retail and commercial buildings. Bailey Cassette System can be used at low heights because each panel remains flat without ripples or fixing dimples. This enables the creation of impressive, eye catching designs that work at any angle.


As drawing ???• Panel:

[And]Concave, radius ??? mm - Curved in section on short axis. Radius: 0.4–20 m.Convex, radius ??? mm - Curved in section on short axis. Radius: 0.4–20 m.Hinged panel for accessRear edgeRear edge with ventilation - Needle punching to upstand edge provides concealed ventilation equivalent to continuous 10/ 25 mm gap.StandardTapered, segmental endsTapered, curved ends - Curved on plan.

– Size:Modular length:

1000 mm1500 mm




2000 mm2500 mm3000 mm - As standard.??? mm - Length (maximum): 3000 mm.

Modular width:[And]6008301000??? mm - Width: 150–1000 mm (maximum).

Overall depth:35 mm - Standard for panel widths <600 mm.40 mm - Standard for panel widths >600 mm.

• Rear edge trim:[And]Angle, ??? x ??? mm, ??? ºCurved on plan, radius ??? ºGlaze-in profile, ??? º - To suit glazed screen or curtain walling.As drawing ???

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating - standard option.Syntha Pulvin, colour ???, gloss level ??? - Non standard option.Anodized, colour ??? - Non standard option.PVDF , colour ??? - Non standard option.

• Accessories:NoneBarge boxes - Panels with upstand, where end of run is exposed.Access hatch - 300 x 300 mm, 450 x 450 mm.Access panel - Entire panel made accessible, hinged longitudinally with stays and quick-release opening.


As standard: (use this box to describe the features of the product that are provided as standard)Layout:Building tolerance is accommodated within the system of up to +100 mm longitudinally and + / - 20 mm in section.

Supports:Fixed to Bailey Carcassing System, off primary building structure. Consult supplier for project specific configuration.



Options: (use this box to describe the features of the product that are optional)Panel size:

Length: 3 m as standard. (Most economic option). Other lengths to order. Width: 150–1000 mm.

Rear edge trim:

- Glaze-in profile:Edge of panel is sized to match glazing units and sealed to curtain wall or screen profile using glazing beads.





Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Cassette Soffit System.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Aluminium Concealed Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Pressed aluminium concealed gutter system.

Product general description:Pressed aluminium box gutter system.

Section to suit building profile. Generally rectangular or trapezoidal. Sole width (maximum): 250 mm. For greater widths use Bailey Atlantic Monsoon gutter. Gauge: 2mm but increased in accordance with supplier recommendations. Jointing: External joint strap assembled dry, with gap for expansion. Joint finished internally

with silicone sealant. Mill finish, powdercoat as option. Compatible downpipes listed separately. Suitable for use within Bailey Fascias and Soffits as combined Eaves System. Detail design service available from supplier supplier. Installation by recommended

subcontractors.


Product reference:Aluminium Concealed Gutter Generally a mill finish rectangular or trapezoidal profile with a maximum sole of 250mm


As drawing ???• Section:

As drawing ???• Outlet:

76 mm diameter102 mm diameter150 mm diameter72 x 72 mm102 x 102 mm150 x 150 mm

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating. Only if visible once installed.Mill - Standard option.Syntha Pulvin, colour ???, gloss level ??? - Polyester powder coating. Non standard option.

• Supports:Brackets ??? - Steel, galvanized finish, 6 mm gauge, at 0.6 m centres, as standard option.Direct ??? - Self-supporting between two points of continuous structure.

• Other requirements:[And]External angle ??? ºInternal angle ??? ºExternal joint strapsStop end leftStop end rightOverflows






Options: (use this box to describe the features of the product that are optional)Section:For estimated flow rates, required number, location and size of downpipes, consult supplier.



Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Aluminium Concealed Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Corfe Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Cast aluminium half round gutter system.

Product general description:Cast aluminium half round gutter system.

Approximates to traditional half round cast iron systems. Choice of sizes. Bracket fix to fascia or to rafters. Secure using stainless steel screws. Jointing: Spigot and socket, bedded in silicone mastic and secured using stainless steel

bolts. Powder coated finish applied inhouse. Consult manufacturer for choice of colour. Thirty year



Product reference:Corfe Gutter A cast aluminium half round gutter which reproduces the features of half round cast iron system. Installed in fascia or rafter brackets, jointig is achieved with a socket, which is normally on the left hand side looking at the building. Joints are bedded on silicone sealant and secured with a stainless steel bolt through the sole.


As drawing ???• Section width:

100 mm113 mm125 mm150 mm

• Outlet:63.5 mm diameter76 mm diameter102 mm diameter - For section width 150 mm only.


• Other requirements:[And]External angle 90 ºInternal angle 90 ºExternal angle 135 ºInternal angle 135 ºFascia brackets - Use at 0.9 m centres.Internal joint sleeve - Use to connect gutters without sockets.Rafter brackets, side fixRafter brackets, top fix, pitch ??? º




Stop end - External/ Internal.


As standard: (use this box to describe the features of the product that are provided as standard)Handing:Socket installed to left when viewing the building.

Plain gutter length:1.83 m, modular. Actual length includes socket for overlap.

Running outlet length:148 mm. Actual length includes two sockets for overlap.




– Gutter section 100 mm diameter. Outlet size 63 mm diameter. Flow rate at outlet: 1.1 L/s. Roof area: 53 m².





Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Corfe Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.








Product name: Durham Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Cast aluminium ogee gutter system.

Product general description:Cast aluminium ogee gutter system.

Profile approximates to Victorian ogee cast iron gutters. Choice of section sizes. Bracket fix to fascia or rafters. Secure using stainless steel screws. Jointing: Spigot and socket, bedded in silicone mastic and secured using stainless steel

bolts. Powder coated finish applied in-house. Consult manufacturer for choice of colour. Thirty year



Product reference:Durham Gutter - Is a cast aluminium to a traditional Ogee pattern which was extensively used in Victorian times in cast iron. This product can be used in refurbishment projects to match original specifications, or on new buildings where a very traditional style gutter is required.


As drawing ???• Section (width x depth):

100 x 55 mm113 x 60 mm125 x 65 mm

• Outlet:63 mm diameter76 mm diameter


• Other requirements:[And]Actual gutter length includes socket overlapExternal angle 90º - Gutter length, internal faces: 70 x 25 mm for 100 mm profile. 55 x 15 mm for 113 mm profile. 73 x 20 mm for 125 mm profile.Internal angle 90ºExternal angle 135ºInternal angle 135ºFascia bracketsRafter brackets, side fixRafter brackets, top fix, pitch ??? ºStop end leftStop end right





As standard: (use this box to describe the features of the product that are provided as standard)Handing:Socket installed to left when viewing the building.

Plain gutter length:1.83 m, modular. Actual length includes socket for overlap.

Running outlet length:194 mm. Actual length includes socket for overlap.

Options: (use this box to describe the features of the product that are optional)No optional features



Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Durham Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Cassette Eaves System


Product summary: (a one sentence product description used to differentiate between similar products)Aluminium eaves system with interlocking joints and secret fixing.

Product general description:Aluminium fascia/ soffit panels generally for use with concealed gutter (Bailey Monsoon Atlantic or Bailey Aluminium), or external gutter (Bailey Rainwater Systems range) as a combined eaves system.

Fascia panels compatible with Bailey Cassette Soffit system, Bailey V Joint Soffit system or Bailey Snap-On I-Line Feature Channel. Utilises interlocking joints on all edges, integral stiffeners and appropriate metal gauge to ensure consistent flatness.

Complete system includes Bailey Support Carcassing for suspension from primary building structure, ensuring correct alignment and adjustability.

Panels typically span between Carcassing fixing points with long axis parallel to building elevation. Other support arrangements are feasible.

Choice of standard or special sections, sizes and finish. Typical standard profiles include; bullnose, aerofoil, quadrant, chisel, stepped vertical and vertical.

Powder coated finish with choice of colour. Applied in-house with thirty year guarantee available on application, subject to location..

Detail design service available from supplier. Installation by recommended subcontractors.

Fixings: Aluminium rivets and stainless steel self-drill and tap screws. Typically at 0.6 m centres, but consult supplier for individual project specification.


Product reference:Eaves System Bailey Cassette Eaves System has been rigorously designed and developed to be particularly neat and smooth in finished appearance, whilst featuring ease of installation. The system provides a long life, low maintenance solution for this critical building element.



– Length:1000 mm1500 mm - Standard option for curved or faceted panels.2000 mm2500 mm3000 mm - Standard option for straight panels.??? mm - Length (maximum): 3000 mm.

– Gauge (varied at supplier discretion):2 mm2.5 mm3 mm

– Planform:Curved - Welded edges at returns.Faceted




Straight– Leading edge profile/ section:

Aerofoil, lower radius ??? mm, upper radius ??? mmBullnose, radius ??? mmChiselParapet, front face ??? mmQuadrant, radius ??? mmVertical, front face ??? mmAs drawing ???

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating. Standard option.Syntha Pulvin, colour ???, gloss level ??? - Non standard option.Anodized, colour ??? - Non standard option.PVDF , colour ??? - Non standard option.

• Accessories/ Other requirements:[And]NoneBarge boxesCorner unit ???ºStopend unitVerge junction


As standard: (use this box to describe the features of the product that are provided as standard)Layout:

2–3 mm expansion gap between units. Building tolerance is accommodated within the system of up to +100 mm longitudinally and

+ / - 20 mm in section.

Supports:- Fixed to Bailey Carcassing System, off primary building structure. Consult supplier for project specific configuration.



Options: (use this box to describe the features of the product that are optional)Panel:

- Length:3 m as standard, most economic option. Other lengths to order.

- Girth:Width before pressing (maximum girth): 1500 mm.

- Section:Cost may vary with number of bends or radii.





Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Cassette Eaves System.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Flush Fit Downpipes Round


Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium round downpipe system with concealed spigot joints.

Product general description:Extruded aluminium round downpipe system with concealed spigot joints.

Choice of section. Gauge varies with diameter. Uses loose stand off brackets. Secure brackets at 1.5 m centres using plugs and 50 mm no 10 stainless steel screws, with

capped heads. Powder coated finish applied in-house. Consult manufacturer for choice of colour. Thirty year

guarantee available on application, subject to location. Similar square section systems available.


Product reference:Flush Fit Downpipes Round - Offers a distinctive architectural profile that is extruded in heavy grade aluminium to provide a robust product suitable for all building applications. Downpipes are supplied with a polyester powder coated finish giving a long maintenance free life.The Flush-Fit range with its concealed spigot jointing and minimalistic bracket fixing, offers a sleek, unobtrusive system for contemporary buildings


As drawing ???• Size:

63 mm diameter - 1.2 mm gauge.76 mm diameter - 1.6 mm gauge.102 mm diameter - 1.6 mm gauge.152 mm diameter - 2 mm gauge.

• Length:[And]1 m2.5 m3 m

• Bracket: - Loose stand off, choice of projection off wall, either fixed or adjustable.

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating. Standard option.??? Powder coating, colour ???, gloss level ??? - Non standard option.

• Accessories/ Other requirements:[And]Elbow - Choice of angle: 92.5º, 112.5º, 135º.Hopper head cast - (w x d x h) 255 x 178 x 178.Hopper head fabricated - (w x d x h) 300 x 200 x 220.One piece offset 92.5º, 112.5º, 135º - Choice of offset: 45, 75, 100, 125, 150 mm.Two piece offset 92.5º, 112.5º, 135º - Choice of offset: 300, 500, 1000 mm.Rodding access pipeShoe




Single branch 92.5º, 112.5º, 135º


As standard: (use this box to describe the features of the product that are provided as standard)Length:Dimensioned for modular length. Actual length includes 40 mm spigot, one end.

Bracket:

– Standoff dimensions:3, 25, 31, 50 mm.

- Extension bracket:Adjustable from 50 to 250 mm.






Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Flush Fit Downpipes Round.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.



Key:Within the "Product Specification Clause" section, the following notation is used:[-] This is an empty insert, into which a specifier can enter their own requirements (e.g. colour or size).





[d] The value below this notation is the default value for a property, meaning that is selected automatically for the specifier.[And] More than one item from the values below this notation may be selected by the specifier.





Product name: Flush Fit Downpipes Square


Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium square downpipe system with spigot concealed joints.

Product general description:Extruded aluminium square downpipe system with concealed spigot joints.

Choice of section. 2 mm metal gauge. Choice of loose standoff brackets or vandal-resistant concealed brackets. Secure brackets at 1.5 m centres using plugs and 50 mm no 10 stainless steel screws with

capped heads. Powder coated finish applied in-house. Consult manufacturer for choice of colour. Thirty year

guarantee available on application, subject to location. Similar round section systems available.


Product reference:Flush Fit Downpipes Square Offers a distinctive architectural profile that is extruded in heavy grade aluminium to provide a robust product suitable for all building applications. Downpipes are supplied with a polyester powder coated finish giving a long maintenance free life.The Flush-Fit range with its concealed spigot jointing and minimalistic bracket fixing, offers a sleek, unobtrusive system for contemporary buildings.



72 x 72 mm102 x 76 mm102 x 102 mm

• Length:[And]1 m2.5 m3 m

• Bracket:[And] - Loose stand off choice of projection off wall, either fixed or adjustable. - Vandal-resistant concealed fix.


• Accessories/ Other requirements:[And]Elbow - Choice of angle: 92.5º, 112.5º, 135º.Hopper head cast - (w x d x h) 255 x 178 x 178.Hopper head fabricated - (w x d x h) 300 x 200 x 220.One piece offset 92.5º, 112.5º, 135º - Choice of offset: 45, 75, 100, 125, 150 mm.Two piece offset 92.5º, 112.5º, 135º - Choice of offset: 300, 500, 1000 mm.




Rodding access pipeShoeSingle branch 92.5º, 112.5º, 135º


As standard: (use this box to describe the features of the product that are provided as standard)Length:Dimensioned for modular length. Actual length includes 40 mm spigot, one end.

Bracket:

– Standoff dimensions:3, 25, 31, 50 mm.

- Extension bracket:Adjustable from 50 to 250 mm.






Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Flush Fit Downpipes Square.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.



Key:





Within the "Product Specification Clause" section, the following notation is used:[-] This is an empty insert, into which a specifier can enter their own requirements (e.g. colour or size).[d] The value below this notation is the default value for a property, meaning that is selected automatically for the specifier.[And] More than one item from the values below this notation may be selected by the specifier.





Product name: I-Line Snap-On Feature Channel


Product summary: (a one sentence product description used to differentiate between similar products)Adaptable extruded aluminium feature channel for horizontal and vertical applications.

Product general description:Extruded aluminium feature channel for application to eavesand facades.

Composite profile replicating exposed steel 'I' beams and columns without problems of corrosion, cold bridging and fireproofing associated with exposure of structural steel.

Precision extruded. flange units snap-on to concealed fixed clips. Pressed web unit provides variable dimension between flanges and interface detail options. Choice of flange projection from 55 - 220 mm. Readily combined with Bailey Cassette Fascia System. Suitable for use with Bailey Carcassing / Laser-Line carcassing Systems.. Powder coated finish with choice of colour. Applied in-house with thirty year guarantee

available on application, subject to location. Anodized and PVDF finish option available.


Product reference:I-Line Snap-On Feature Channel - Bailey I-Line is an eaves feature that offers new creative possibilties for architects and designers. Inspired by the use of exposed metal beams and designed to evoke strength and structual integrity, I-line brings the benefits of being lightweight and low maintenance to visually unavailable to exposed structures.


As drawing ???• Size:

– Web height (dimension between flange extents):??? mm - 100 - 650 mm (variable).As drawing ???

– Flange projection x leading edge:55 x 10 mm76 x 10 mm102 x 10 mm220 x 25 mm

• Finish:Anodized, colour ???Interpon D, colour ???, gloss level ??? - Polyester powder coating. Standard option.??? Powder coating, colour ???, gloss level ??? - Non standard option.PVDF (polyvinylidene fluoride), colour ???

• Other requirements/ Accessories:[And]Cross junctionOpen cross junctionExternal corner ??? angleInternal corner ??? angleT JunctionFull stopend




Flange endcap


As standard: (use this box to describe the features of the product that are provided as standard)Web:

Height: Measured overall. Standard profile: Edges returned twice, 25 mm. Standard length: 3 m. Other lengths may be available to special order.

Flanges: Projection: Measured from face of web. Standard configuration is two flanges, fixed top and bottom of web, with angled face to

centreline. Components allow asymmetric flanges, other flange locations, numbers or orientation.






Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves I-Line Snap-On Feature Channel.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Kenilworth Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Pressed aluminium stepped profile gutter system.

Product general description:Pressed aluminium stepped profile gutter system.

High capacity. Range of section sizes. Direct fix to fascia through prepunched slots at 600 mm centres (through flat back of gutter),

using 25 mm x 12 gauge stainless steel screws. Jointing: External joint strap assembled dry, with gap for expansion. Joint finished internally

with silicone sealant. No visible bolts through sole at joints. Powder coated finish applied inhouse. Consult manufacturer for choice of colour. Thirty year



Product reference:Kenilworth Gutter - This is one of a pair of profiled pressed aluminium gutters available in four standard sizes. They provide the hydraulic advantage of a box gutter but the profiled face gives some architectural interest, enabling the designer to make the gutter a feature of the building. The gutters have high flow capacity allowing the number of downpipes to be reduced, with consequent savings in drainage costs. As the gutters are diect fixed to a fascia board, no brackets are visible and external joint strap requires no seen fixings, resulting in a smooth gutter line.


As drawing ???• Section (nominal depth x width):

80 x 125 mm - Thickness 1.6 mm.110 x 160 mm - Thickness 2 mm.135 x 200 mm - Thickness 2 mm.170 x 230 mm - Thickness 2.5 mm.

• Outlet:63 mm diameter76 mm diameter102 mm diameter72 x 72 mm102 x 76 mm102 x 102 mm


• Other requirements:[And]External angle 90 º - Gutter length (internal faces): 75 mm each face.Internal angle 90 º - Gutter length (external faces): 75 mm each face.




External angle 135 ºInternal angle 135 ºExternal angle ??? ºInternal angle ??? ºExternal joint strap - Width: 100 mm.Stop end left - Gutter length: 35 mm.Stop end right - Gutter length: 35 mm.


As standard: (use this box to describe the features of the product that are provided as standard)Plain gutter length:3 m.

Outlet length:250 mm.




– Gutter size 85 x 125 mm. Flow rate: 1.75 L/s. Outlet size 65 mm diameter. Flow rate: 1.9 L/s. Roof area: 93 m². Outlet size 76 mm diameter. Flow rate: 2.6 L/s. Roof area: 137 m². Outlet size 72 x 72 mm. Flow rate: 2.9 L/s. Roof area: 128 m².

– Gutter size 110 x 160 mm. Flow rate: 3.73 L/s. Outlet size 76 mm diameter. Flow rate: 3.3 L/s. Roof area: 160 m². Outlet size 72 x 72 mm. Flow rate: 3.6 L/s. Roof area: 173 m².

– Gutter size 135 x 200 mm. Flow rate: 5.74 L/s. Outlet size 76 mm diameter. Flow rate: 3.7 L/s. Roof area: 180 m². Outlet size 102 mm diameter. Flow rate: 6.6 L/s. Roof area: 320 m². Outlet size 72 x 72 mm. Flow rate: 4 L/s. Roof area: 195 m². Outlet size 102 x 102 mm. Flow rate: 8 L/s. Roof area: 388 m².




Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Kenilworth Gutter.



2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Laser-Line Carcassing System


Product summary: (a one sentence product description used to differentiate between similar products)Engineered bracket system for fully cantilevered eaves support from primary structure.

Product general description:Bracket system for carcassing eaves projections without structural outriggers.

Designed for use with Bailey Cassette Fascia and Soffit System, Bailey V Plank Soffit System and Bailey I-Line Snap-On Feature Channel System, as a composite system.

Comprises heavy-gauge primary bracket for attachment to building, and light-gauge secondary plate profiled to eaves shape.

Two-component system allows tolerance adjustment and accurate alignment using laser beams.

Flanged edges on bracket for fixing allow external cladding components to span between brackets, eliminating longitudinal rails, angles and channels.

Projection of up to 900 mm possible with single point of attachment to building face. Lightweight construction reduces thermal bridging risk and is safer and quicker to install. Brackets positioned typically at 600 - 1000 mm centres. Manufactured in galvanised steel with gauge and. fixing to suit individual application.. Detail design available from supplier. Installation by recommended subcontractors.


Product reference:Laser-Line Carcassing System This is an accurately fabricated one – piece component that can be aligned using laser beams or traditional methods. Using laser beams allows complete elevations to be aligned easily and with far greater accuracy than more traditional measurements. Laser-Line’s strength and light weight means that the carcassing brackets fix directly to the structure with as few as two points.



– Projection x height:??? x ??? mmAs drawing ???

• Mounting centres (contact supplier):600 mm750 mm??? mm

• Fixing substrate (contact supplier for suitable medium):[-]


As standard: (use this box to describe the features of the product that are provided as standard)No standard features







Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Laser-Line Carcassing System.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Lindisfarne Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Pressed aluminium stepped profile gutter system.

Product general description:Pressed aluminium stepped profile gutter system.

Range of section sizes. Direct fix to fascia through prepunched slots at 600 mm centres (through flat back of gutter)


with silicone sealant. No visible bolts through sole at joints. Powder coated finish applied in-house. Consult manufacturer for choice of colour. Thirty year



Product reference:Lindisfarne Gutter - This is one of a pair of profiled pressed aluminium gutters available in four standard sizes. They provide the hydraulic advantage of a box gutter but the profiled face gives some architectural interest, enabling the designer to make the gutter a feature of the building. The gutters have high flow capacity allowing the number of downpipes to be reduced, with consequent savings in drainage costs. As the gutters are diect fixed to a fascia board, no brackets are visible and external joint strap requires no seen fixings, resulting in a smooth gutter


As drawing ???• Section (nominal depth x width):

85 x 110 mm - External dimensions 85 x 110 mm. Gauge 1.6 mm.108 x 135 mm - External dimensions 110 x 135 mm. Gauge 2 mm.140 x 175 mm - External dimensions 144 x 175 mm. Gauge 2 mm.175 x 210 mm - External dimensions 177 x 210 mm. Gauge 2.5 mm.

• Outlet:63 mm diameter76 mm diameter102 mm diameter - Not available on section 85 x 110 mm.72 x 72 mm102 x 102 mm - Not available on sections 85 x 110, 108 x 135 mm.


• Other requirements:[And]External angle 90 º - Gutter length (internal faces): 75 mm, each face.Internal angle 90 º - Gutter length (external faces): 75 mm, each face.External angle 135 ºInternal angle 135 º




External angle ??? ºInternal angle ??? ºExternal joint strapStop end left - Gutter length: 35 mm.Stop end right - Gutter length: 35 mm.


As standard: (use this box to describe the features of the product that are provided as standard)Plain gutter length:3 m.Running outlet length:250 mm.

Finish:–Standard polyester powder coating: Interpon D1036, standard colour range.


Options: (use this box to describe the features of the product that are optional)Indicative flow rates (maximum, with central outlet):Roof areas are indicative maxima. Suitable outlet interval varies with local climate and other factors. Consult manufacturer.

– Gutter size 85 x 110 mm. Flow rate: 1.68 L/s. Outlet size 63 mm diameter. Flow rate: 2 L/s. Roof area: 96 m². Outlet size 76 mm diameter. Flow rate: 2.7 L/s. Roof area: 137 m². Outlet size 72 x 72 mm. Flow rate: 2.9 L/s. Roof area: 147 m².


– Gutter size 140 x 175 mm. Flow rate: 5.73 L/s. Outlet size 76 mm diameter. Flow rate: 3.7 L/s. Roof area: 188 m². Outlet size 102 mm diameter. Flow rate: 6.6 L/s. Roof area: 335 m². Outlet size 72 x 72 mm. Flow rate: 4 L/s. Roof area: 203 m². Outlet size 102 x 102 mm. Flow rate: 8 L/s. Roof area: 406 m².




Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Lindisfarne Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.



3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: C- Fix Coping System


Product summary: (a one sentence product description used to differentiate between similar products)Aluminium secret fix clip on parapet coping system.

Product general description:Pressed aluminium coping panels with secret fix clip on action to support clips.

EPDM seals at joints for weathering. Design allows for structural and thermal movement. Supplied as standard with sloped weatherstruck profile.. Powder coated finish with choice of colour. Applied in-house with thirty year guarantee

available on application, subject to location. Anodized and PVDF options available. Complementary tapered support brackets available with insulated thermal break option. Suitable for use with Bailey Fascia System and Bailey Carcassing System. Detail design service available from supplier. Installation by recommended subcontractors.


Product reference:Secret Fix Coping System - Bailey Secret Fix Coping Systems do a better job. As walls and roofs become better insulated for energy efficiency heat loss through the top of wall becomes more important. Bailey C-Fix system can be installed with a thermal break, to prevent cold bridging and provide highly effective insulation as well as giving economical secret fix, low maintenance, long lasting waterproof protection for parapet walls.



– Length:3000 mm - Standard option.??? mm - Length (maximum ): 3000 mm.

– Width and downstand: ( Add 50 mm to wall width for coping width.Typical standard downstand is 75 mm )

???(downstand front ) x ??? ( width ) x ???mm ( downstand rear )As drawing ???

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating. Standard option.Syntha Pulvin, colour ???, gloss level ??? - Non standard option.Anodized, colour ??? - Non standard option.PVDF , colour ??? - Non standard option.

• Tapered support bracket:InsulatedUninsulated

• Other requirements:[And]Corner ??? ºStop endTee junction





As standard: (use this box to describe the features of the product that are provided as standard)Finish:Consult supplier for colour choice.– Standard polyester powder coating: Interpon D1036, standard colour range.





Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves C- Fix Coping System.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Stirling Gutter


Product summary: (a one sentence product description used to differentiate between similar products)Pressed aluminium box gutter system.

Product general description:Pressed aluminium box gutter system.

High capacity. Range of section sizes. Direct fix to fascia through prepunched slots at 600 mm centres (through flat back of gutter),


with silicone sealant. No visible bolts through sole at joints. Powder coated finish applied inhouse. Consult manufacturer for choice of colour. Thirty year



Product reference:Stirling Gutter - This has a range of five sizes of aluminium box gutters with the highest hydraulic capacity of 17 litres per second. This allows the drainage engineer to reduce the number of downpipes drops with a consequent saving in drainage costs. In addition the external joint strap system provide for expansion and contraction over a full climatic range of the UK without requiring separate expansion joints and also eliminates the unsightly nuts and bolt often associated with joints on this type of gutter.


As drawing ???• Section (nominal depth back face x width):

100 x 75 mm - External dimensions 87 x 102 mm. Gauge 1.6 mm.125 x 100 mm - External dimensions 104 x 124 mm. Gauge 2 mm.150 x 100 mm - External dimensions 112 x 150 mm. Gauge 2 mm.150 x 150 mm - External dimensions 155 x 164 mm. Gauge 2 mm.200 x 200 mm - External dimensions 200 x 200 mm. Gauge 2.5 mm. Internal bracket.

• Outlet:76 mm diameter102 mm diameter - Not available on gutter size 100 x 75 mm.150 mm diameter - Not available on gutter sizes 100 x 75, 125 x 100, 150 x 100, 150 x 150 mm.72 x 72 mm102 x 102 mm - Not available on gutter size 100 x 75 mm.102 x 76 mm


• Other requirements:[And]External angle 90 º - Gutter length (internal faces): 75 mm each face.




Internal angle 90 º - Gutter length (external faces): 75 mm each face.External angle 135 ºInternal angle 135 ºExternal angle ??? ºInternal angle ??? ºExternal joint straps - Width: 100 mm.Stop end left - Gutter length: 48 mm.Stop end right - Gutter length: 48 mm.





Options: (use this box to describe the features of the product that are optional)Outlet:

- Length: Gutter sections 100 x 75, 125 x 100, 150 x 100: 250 mm. Gutter sections 150 x 150, 200 x 200: 300 mm.

Section:Indicative flow rates (maximum with central outlet): Roof areas are indicative maxima. Suitable outlet interval varies with local climate and other factors. Consult manufacturer.


– Gutter size 125 x 100 mm. Flow rate: 4.05 L/s. Outlet size 76 mm diameter. Flow rate: 3.2 L/s. Roof area: 156 m². Outlet size 102 mm diameter. Flow rate: 5.5 L/s. Roof area: 265 m². Outlet size 72 x 72 mm. Flow rate: 3.4 L/s. Roof area: 168 m². Outlet size 102 x 102 mm. Flow rate: 6.5 L/s. Roof area: 312 m².








Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Stirling Gutter.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Traditional Downpipes Round


Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium round downpipe system with cast eared socket joints.

Product general description:Extruded aluminium round downpipe system with cast eared socket joints.

Approximates to traditional cast iron systems. Choice of sizes. Integral eared sockets with supplementary loose sockets and pipe brackets. Secure through eared-socket to plugs with 50 mm x 10 stainless steel screws. Polyester powder coated finish with choice of colour. Powder coated finish applied in-house.

Consult manufacturer for choice of colour. Thirty year guarantee available on application, subject to location.

Similar square section system available.


Product reference:Traditional Downpipes Round - This is extruded in a heavy grade aluminium to provide a robust product suitable for all building applications. The traditional range utilises cast-eared sockets at joint positions to replicate the original cast iron systems used in the past. This product is ideally suited to refurbishment or heritage projects;or for buildings designed to reflect that era.


As drawing ???• Standard pipe:

– Section:63 mm diameter - 1.2 mm gauge.76 mm diameter - 1.6 mm gauge.102 mm diameter - 1.6 mm gauge.

– Length:[And]1 m2.5 m3 m

• Brackets:[And]Integral - Cast eared socket on each component.Loose socket - Available as supplementary fixing if required.Pipe bracket - Available as supplementary fixing if required.


• Accessories/ Other requirements:[And]Elbow - Choice of angle: 92.5º, 112.5º, 135º.Hopper head cast - (w x d x h) 255 x 178 x 178One piece offset 92.5º, 112.5º, 135º - Choice of offset: 45, 75, 100, 125, 150 mm.Two piece offset 92.5º, 112.5º, 135º - Choice of offset: 300, 500, 1000 mm.




Rodding access pipeShoeSingle branch 92.5º, 112.5º, 135º


As standard: (use this box to describe the features of the product that are provided as standard)Length:Dimensioned for modular length. Actual length includes cast socket, one end.

Bracket:

– Standoff dimensions:25, 35, 38 mm.

Finish:Consult supplier for colour choice.Standard polyester powder coating: Interpon D1036, standard colour range.

Electrostatically applied to BS EN 12206 and Qualicoat Class 1 standards. Film thickness: 60 micron (minimum 50 micron).




Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Traditional Downpipes Round.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: Traditional Downpipes Square


Product summary: (a one sentence product description used to differentiate between similar products)Extruded aluminium square downpipe system with cast eared socket joints.

Product general description:Extruded aluminium square downpipe system with cast eared socket joints.

Profile approximates to traditional cast iron systems. 2 mm metal gauge. Choice of sizes. Integral eared sockets with supplementary loose sockets and pipe brackets. Secure through eared-socket to plugs with 50 mm x 10 stainless steel screws. Polyester powder coated finish with choice of colour. Powder coated finish applied in-house.

Consult manufacturer for choice of colour. Thirty year guarantee available on application, subject to location.

Similar round section system available.


Product reference:Traditional Downpipes Square


As drawing ???• Standard pipe:

– Section:72 x 72 mm102 x 76 mm - Ears on long side.102 x 102 mm

– Length:[And]1 m2.5 m3 m

• Brackets:[And]Integral only - Cast eared socket on each component.Loose socket - Available as supplementary fixing if required.Pipe bracket - Available as supplementary fixing if required.


• Accessories/ Other requirements:[And]Elbow - Choice of angle: 92.5º, 112.5º, 135º.Hopper head cast - (w x d x h) 255 x 178 x 178.One piece offset 92.5º, 112.5º, 135º - Choice of offset: 31, 45, 75, 100, 125, 150 mm.Two piece offset 92.5º, 112.5º, 135º - Choice of offset: 300, 500, 1000 mm.Rodding access pipeShoe




Single branch 92.5º, 112.5º, 135º


As standard: (use this box to describe the features of the product that are provided as standard)Length:Dimensioned for modular length. Actual length includes cast socket, one end.

Bracket:

– Standoff dimensions:25, 35, 38 mm.

Finish:Consult supplier for colour choice.Standard polyester powder coating: Interpon D1036, standard colour range.

Electrostatically applied to BS EN 12206 and Qualicoat Class 1 standards. Film thickness: 60 micron (minimum 50 micron).




Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves Traditional Downpipes Square.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.










Product name: V Joint Soffit System


Product summary: (a one sentence product description used to differentiate between similar products)Extruded Aluminium plank type system with interlocking V joints, for soffit or rainscreen cladding applications.

Product general description:Extruded aluminium plank type system with interlocking V joints.

Suitable for soffit or vertical rainscreen cladding such as gable infills and spandrel panels. 150 mm coverwidth, robust extrusion, 2 mm gauge, with complementary edge and cover

trims. Replicates traditional 'tongue and groove' appearance. Complete system includes Bailey Support Carcassing for suspension from primary building

structure, ensuring correct alignment and adjustability. Supplied in 3 m lengths as standard, with shorter lengths available as option. Tolerance within V joint allows for installing to sectional curve. Powder coated finish with choice of colour. Applied in-house with thirty year guarantee

available on application, subject to location. Anodized and PVDF finish option available. Suitable for use with Bailey Fascia System to provide combined Eaves System. Detail design service available from supplier. Installation by recommended subcontractors.

Fixings: Aluminium rivets and stainless steel self-drill and tap screws. Typically at 0.6m centres, but consult supplier for individual project specification.


Product reference:V Joint Soffit System - Bailey V-Joint soffit and fascia system has been designed to bring the appearance of planked soffits to a wide range of construction projects. Inspired by traditional planked soffits it is frequently used successfully on modern architectural projects. V-Joint is so adaptable that it is used to add interest and value to gable, facades, as well as soffits, providing features such as infills, herringbones and coffering.


As drawing ???• Plank:

– Length:3000 mm - Standard option.??? mm - Length (maximum): 3000 mm.

• Rear edge trim:With 25 mm vent - Needle punched vent, requires no insect screen.With 10 mm vent - Needle punched vent, requires no insect screen.Standard unventedAs drawing ???Submit proposals

• Finish:Interpon D, colour ???, gloss level ??? - Polyester powder coating - standard option.Syntha Pulvin, colour ???, gloss level ??? - Non standard option.




Anodized, colour ??? - Non standard option.PVDF , colour ??? - Non standard option.

• Other requirements/ Accessories:

T trim - Masks cut edges.Mitre cover strip - Masks cut edges at mitres and other straight joints.300 x 300 mm access hatchExtruded rear edge trimPressed rear edge trim2 way starter trim - For vertical gable infill applications.


As standard: (use this box to describe the features of the product that are provided as standard)Layout:

For layouts parallel to building face, planks are typically installed from fascia inwards. Rear edge trim accommodates lateral tolerance. Last soffit plank is cut to fit on site. Cut edge

is concealed by Rear edge trim. On large soffit areas requiring multiple plank lengths, end joints are lightly abutted and

staggered in 'stretcher bond' fashion. The linear V joint emphasis is thus maintained.

Supports:- Fixed to Bailey Carcassing System, off primary building structure. Consult supplier for project specific configuration.






Instructions:1. Use this product page to amend the NBS Plus entry for BaileyEaves V Joint Soffit System.2. Microsoft Word can automatically track the amendments you make to this document and this feature has been selected for you. To control these settings use the Reviewing toolbar (Tools | Customize | Toolbars | Reviewing). All you have to do is simply type in your amendments and return this document to us.3. NBS Plus styles, e.g. bullets and bold text, can be selected from the Styles and Formatting list. This list can be displayed by selecting 'Styles and Formatting' from the Format menu.5. Alternatively, for simple corrections you can email us at [email protected] with a description of the required changes. You can also print out this page, annotate the changes by hand and return to NBS using the address below.


NBS

© National Building Specification LtdGenerated by NBS on 20/8/2009 at 11:44:57



The Old Post OfficeSt Nicholas StreetNewcastle upon Tyne NE1 1RH




NBS PLUS MANUFACTURER’S PRODUCT PAGE · Web viewJointing: Internal joint strap bedded in...

Documents

Transcript of NBS PLUS MANUFACTURER’S PRODUCT PAGE · Web viewJointing: Internal joint strap bedded in...