NBN40-U1-E2

2
1 Inductive sensor NBN40-U1-E2 Release date: 2014-07-22 18:05 Date of issue: 2014-07-22 194779_eng.xml Germany: +49 621 776 4411 Pepperl+Fuchs Group Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. USA: +1 330 486 0001 Singapore: +65 6779 9091 www.pepperl-fuchs.com [email protected] [email protected] [email protected] Model Number NBN40-U1-E2 Features Sensor head bidirectional and rotat- able 40 mm non-flush 3-wire DC 4 LEDs indicator for 360 visibility Accessories V1-M20-80 Receptacles, M12/M20; plastic version MH 04-2681F Mounting aid for VariKont, +U1+ and +U9* MHW 01 Modular mounting bracket Technical Data General specifications Switching element function PNP NO Rated operating distance s n 40 mm Installation non-flush Output polarity DC Assured operating distance s a 0 ... 32.4 mm Reduction factor r Al 0.31 Reduction factor r Cu 0.3 Reduction factor r 304 0.74 Reduction factor r Brass 0.39 Nominal ratings Operating voltage U B 10 ... 30 V DC Switching frequency f 0 ... 150 Hz Hysteresis H typ. 5 % Reverse polarity protection reverse polarity protected Short-circuit protection pulsing Voltage drop U d 2 V Operating current I L 0 ... 200 mA Off-state current I r 0 ... 0.5 mA typ. 0.01 mA No-load supply current I 0 20 mA Time delay before availability t v 80 ms Operating voltage indicator LED, green Switching state indicator LED, yellow Functional safety related parameters MTTF d 1510 a Mission Time (T M ) 20 a Diagnostic Coverage (DC) 0 % Ambient conditions Ambient temperature -25 ... 85 C (-13 ... 185 F) Mechanical specifications Connection type screw terminals Core cross-section 2.5 mm 2 Housing material PA/metal with epoxy powder coating Sensing face PA Housing base plastic Degree of protection IP68 / IP69K Mass 225 g Note Tightening torque: 1.8 Nm (housing) Tightening torque: 1.0 Nm (Screw terminal) Compliance with standards and directives Standard conformity Standards EN 60947-5-2:2007 IEC 60947-5-2:2007 Approvals and certificates UL approval cULus Listed, General Purpose CCC approval CCC approval / marking not required for products rated 36 V Dimensions 60 46 118 30 40 40 LED ye LED ye LED gn LED gn 5.3 M20 x 1.5

description

Series: VariKont ®, Housing material: PA/metal with epoxy powder coating, Rated operating distance: 40 mm, Connection type: screw terminals, Output type: 3-wire, Installation: non-flush, Type of voltage: DC

Transcript of NBN40-U1-E2

  • 1

    Inductive sensor NBN40-U1-E2

    Rele

    ase

    date

    : 201

    4-07

    -22

    18:0

    5D

    ate

    of is

    sue:

    201

    4-07

    -22

    1947

    79_e

    ng.x

    ml

    Germany: +49 621 776 4411Pepperl+Fuchs GroupRefer to General Notes Relating to Pepperl+Fuchs Product Information.

    USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com [email protected] [email protected]@de.pepperl-fuchs.com

    Model NumberNBN40-U1-E2

    Features Sensor head bidirectional and rotat-

    able 40 mm non-flush 3-wire DC 4 LEDs indicator for 360 visibility

    AccessoriesV1-M20-80Receptacles, M12/M20; plastic versionMH 04-2681FMounting aid for VariKont, +U1+ and +U9* MHW 01Modular mounting bracket

    Technical DataGeneral specifications

    Switching element function PNP NORated operating distance sn 40 mmInstallation non-flushOutput polarity DCAssured operating distance sa 0 ... 32.4 mmReduction factor rAl 0.31Reduction factor rCu 0.3Reduction factor r304 0.74Reduction factor rBrass 0.39

    Nominal ratingsOperating voltage UB 10 ... 30 V DCSwitching frequency f 0 ... 150 HzHysteresis H typ. 5 %Reverse polarity protection reverse polarity protectedShort-circuit protection pulsingVoltage drop Ud 2 VOperating current IL 0 ... 200 mAOff-state current Ir 0 ... 0.5 mA typ. 0.01 mANo-load supply current I0 20 mATime delay before availability tv 80 msOperating voltage indicator LED, greenSwitching state indicator LED, yellow

    Functional safety related parametersMTTFd 1510 aMission Time (TM) 20 aDiagnostic Coverage (DC) 0 %

    Ambient conditionsAmbient temperature -25 ... 85 C (-13 ... 185 F)

    Mechanical specificationsConnection type screw terminalsCore cross-section 2.5 mm2Housing material PA/metal with epoxy powder coatingSensing face PAHousing base plasticDegree of protection IP68 / IP69KMass 225 gNote Tightening torque: 1.8 Nm (housing)

    Tightening torque: 1.0 Nm (Screw terminal)Compliance with standards and directives

    Standard conformity Standards EN 60947-5-2:2007

    IEC 60947-5-2:2007Approvals and certificates

    UL approval cULus Listed, General PurposeCCC approval CCC approval / marking not required for products rated 36 V

    Dimensions

    6046118

    30 40

    40LED ye

    LED ye

    LED gn

    LED gn

    5.3

    M20 x 1.5

  • Germany: +49 621 776 4411Pepperl+Fuchs GroupRefer to General Notes Relating to Pepperl+Fuchs Product Information.

    USA: +1 330 486 0001 Singapore: +65 6779 9091www.pepperl-fuchs.com [email protected] [email protected]@de.pepperl-fuchs.com

    Inductive sensor NBN40-U1-E2

    2

    Rele

    ase

    date

    : 201

    4-07

    -22

    18:0

    5D

    ate

    of is

    sue:

    201

    4-07

    -22

    1947

    79_e

    ng.x

    ml

    Electrical Connection

    1 L+

    L-

    43