nbc
-
Upload
pallavi-jain -
Category
Documents
-
view
217 -
download
0
description
Transcript of nbc
CONTENTS
Cover Page
Preface
Acknowledgement
Executive Summary
Research Objective
Introduction of Bearing Industry
- Brief Profile
- Products
- Achievements
- Project Detail
- Brief Description of Work
Research Methodology
Data Analysis
Facts and Findings
Conclusion
Recommendation and Suggestion
Appendix(Questionnaries)
Bibliography
A Summer Training Project Report
On “SALES PROMOTION”
Training Undertaken at
“NATIONAL ENGINEERING INDUSTRIES LTD. JAIPUR”
Submitted in partial fulfilment for the Award of degree of
Master of Business Administration
(2012-2014)
Submitted By: - Submitted To:- Saurabh Garg The Director MBAPart 3
rd sem
PREFACE
Bearing industries plays an important role for automobile and many other
industries.
Technologies progress in this field strengthens the competitive position in the
domestic market as well as in Global market, and fulfilling the demand of the
customer through supply management has been a major component of
competitive strategy to enhance organization productivity and profitability.
In this project I have found how Two Wheelers Segment is important for the
bearing industry, what are the Bearing demands of Two Wheelers segments of
different companies and how much NBC supply to them and what are the
application of bearings of various types in different parts of the vehicle of
different companies in Two Wheelers segment.
Working under this project I have gained the knowledge about whole bearing
industries.
Here I have learnt about the use of bearing in different sectors and I have also
gained knowledge about the application of No. of bearings in a single vehicle and
how a supply chain management plays a vital Role in the success of the economy
and various other industries.
ACKNOWLEDGEMENT
I express my sincere thanks to my project guide, Mr. RAJESH RUNGTA
Designation AGM Deptt. Marketing for guiding me right from the inception
till the successful completion of the project. I sincerely acknowledge him for
extending their valuable guidance, support for literature, critical reviews of
project and the report and above all the moral support he had provided to
me with all stages of this project.
I would also like to thank the supporting staff Prof. C.M. Choudhary
Management Department, for their help and cooperation throughout our
project.
Saurabh Garg
EXECUTIVE SUMMARY
OBJECTIVE
This project is done to Identify the application details of bearing in two wheeler
vehicles segments of different companies in different parts and to find what are the
bearing demands of 2 Wheelers segments of different companies and how
much NBC supply to them and what are the application of bearings of various
types in different parts of the vehicle of different companies in 2 Wheelers
segment.
WORK DONE
For this market surveys and fieldwork was done by me, visit to different
automobile companies, analysis of data, tabulation of data and finalization of data
was done by me.
FINDINGS
Data related to application of bearing in different parts of different vehicles of
various companies in Two Wheeler vehicles, and also different marketing
aspects of the company.
“Critical success factor that comes out of the study are as follows”
Importance of information: timely & accurately
Reduction in cost.
Responsiveness of the company.
Accurate & collaborative forecasting
OBJECTIVE
“To Identify the various aspects of marketing of bearing in Global
Market & associate the opportunity in South African Market”
INTRODUCTION OF COMPANY
Company Profile
NATIONAL ENGINEERING INDUSTRIES LTD., the renowned industrialist, late Shri
B.M. Birla, under the name of “National Bearing Company Limited”, founded JAIPUR in
the year 1946 as a pioneer industry in the field of bearing manufacture. The first bearing
was manufactured in 1950 with a modest start of 30,000 bearings in 19 sizes. The
company is now manufacturing nearly 3.8 million bearings per month in over 500
different sizes ranging from 6 mm bore to 1300 mm outer diameter and has the capacity
to manufacture bearings up to 2000 mm outer diameter. At NEI, the development of
bearings is a never-ending job. With ever increasing activities and grant of industrial
licenses for other vital industries and manufacturing of Roller Bearing Axle Boxes for
Railway Rolling Stock, Steel Balls, Tapered Roller Bearings, Spindle Inserts etc., the
name of the company was changed in 1958 to "National Engineering Industries Ltd."
retaining its original trade mark NBC.
The industry is spread over 118 acres of land in Jaipur and 56 acres in Gunsi (Newai).
This is the only unit in the country manufacturing wide variety and range of bearings
such as Ball Bearings, Steel Balls, Tapered Roller Bearings, Cylindrical Roller Bearings
& Axle Boxes for Railway Rolling Stock including Spherical Roller Bearings, Cartridge
Tapered Roller Bearings and Large Diaz special Bearings in separate fully equipped
factories. The development of National Engineering Industries Ltd., was pioneered with
a theme "Indigenisation and Self-reliance".
NBC Bearings are widely used by 2 and 3 Wheelers, Cars, Trucks, Tractors, Electric
Motors, Railway wagon, Coach & Locomotive manufacturers as Original Equipment and
Steel Mills, Heavy Engineering Plants, Bulldozers, Shovels, Tillers and Thermal Power
Plants all across the country. The development of NEI ltd. was pioneered with a theme
“Indigenisation and self – reliance “
PRODUCTS
PLANTS OF NBC
PLANT AT JAIPUR:
(i). Ball Bearing:
Precision Ball Bearings from 6 mm bore to 75 mm bore diameter are manufactured on
state of the art manufacturing facilities with in-process and post-process gauging in
grinding and centrally air conditioned assembly lines with auto gauging and testing
equipment. The latest advanced techniques for manufacturing and Quality Assurance
are implemented to meet the rapid increase in demand for Quality, diversity of
specifications and new types of bearings.
This Division is spread over a covered area of 14,694 Sq. Meters.
(ii). Steel Ball:
Precision Steel Balls up to 25 mm diameters for NBC Bearings are manufactured on
precision grinding and lapping machines to achieve super finished surface, accuracy
and roundness as per ISO standards.
This Division is spread over a covered area of 4,700 Sq. Meters.
(iii). Tapered Roller Bearing:
Precision Tapered Roller Bearings are manufactured in Inch and Metric series from
15.875mm bore to 95.25mm bore with technology obtained from our earlier collaborator,
Federal Mogul Corporation, USA and now with NTN Corporation, Japan. All major
Automobile manufacturers in the country as Original Equipment use these bearings.
This Division is spread over a covered area of 11,652 Sq. Meters.
PLANT AT GUNSI (NEWAI): Established in the year 1980-81 as an expansion project of NEI Ltd. The factory is equipped with fully automated grinding lines with electronic in process & post- process gauging and centrally air-conditioned assembly lines with auto gauging and test equipments for quality and reliability of the products. The plant is spread over a covered area of 7,200 Sq. Meters.
PLANT AT MANESAR: NEI has set up its third Ball Bearing manufacturing plant in the fastest growing industrial town of Manesar in Haryana. The plant is having a covered area of 5200 sq. meters. With the most advanced and sophisticated machines imported from reputed manufacturers from Europe and Japan.
RESEARCH & DEVELOPMENT AT JAIPUR :
(a)
Design & Development: Complete in-house facility for design development of all types of bearings and tooling is available. The design of all types of bearings is done on ProEngineer 3D Modeling & Analysis Software. Complete engineering and research facility is available to solve intricate problems with expert advice on design, development, manufacturing, installation and maintenance of bearings. With the signing of the technical collaboration agreement with NTN Corporation, Japan & BRENCO Inc of USA, the capability to offer finest engineering services in the bearing industry has enhanced. Services of team of experienced engineers are available for selection of bearing as per application.
(b)
Machine Building: NEI has the capability of machine building to design, develop and manufacture special purpose CNC Grinding Lines, HT Lines, Material Handling Equipments and other special purpose machines which have been made for its captive use to keep pace with latest technology. A well-equipped electronic design, development laboratory with all testing facilities supports the Machine Building Division. Machine Building has the capability and supports the Manufacturing Divisions by overhauling and retrofitting of the existing equipments, resulting in upgraded quality and improved productivity. R&D Division is spread over a covered area of 2,007 Sq. Meters.
SAP - ERP: In order to reengineer and integrate the Business processes for sales, production, materials and finance, NEI has successfully implemented SAP- ERP. By use of this Package, our processes now conform to international standard.
(iv). Railway Bearing:
(a) Roller Bearing in Axle Box: With the production of Roller Bearings and Axle Boxes since 1952, the company has fully met the requirements of the Indian Railways (one of the largest systems of the world) by designing and developing Axle Boxes and bearings for fitment to Locomotives manufactured by Diesel Locomotive Works, Chittaranjan Locomotive
Works, various wagon builders, the ICF broad and meter gauge coaches. Over a million NBC bearings and boxes are in service with the Indian Railways. The development of completely indigenised Axle Boxes and bearings for the high speed Rajdhani Locomotive, the Yugoslavian and Egyptian Railway wagons are the highlights of the design capabilities at NEI. On date more than 100 types of Axle Boxes & Bearings have been manufactured.
(b) Spherical Roller Bearing: The manufacturing of Spherical Roller Bearings was started in the year 1975-76 for fitment to broad gauge and meter gauge passenger coaches with designs, technology, machines and equipment procured from the collaborators.
(c) Cartridge Tapered Roller Bearing: For fitment to the new BOX-IN Uprated Wagons designed by the RDSO, NEI is the only manufacturer in the country to indigenise these bearings to a high percentage under collaboration with the largest manufacturer of these bearings in the world. Production of these bearings commenced in the year 1984. These bearings are grease packed and require no field lubrication for a period of 7 years. This Division is spread over a covered area of 4,855 Sq. Meters.
(v). Large Diameter Bearing: Self-sufficiency in steel is the call of the day, so is the importance of bearings in Steel Mills Equipment. NEI has the distinction of being one of the ten manufacturers of these bearings in the world, who can manufacture large diameter bearings up to 2000 mm diameter. Mr. G.P. Birla released the largest bearing manufactured by NEI for fitment to the Plate Mill of Rourkela Steel Plant in September 1985. This 4-Row Tapered Roller Bearing measures 1300 mm dia and weigh 4.39 tons. The large diameter bearings are mainly manufactured out of case carburising steel, heat treated on special equipment and furnaces developed by NEI. Precision grinding is done to close tolerances on CNC Twin Spindle Programmable Berthiez Machine for bearings ranging from 500 to 2000 mm diameter with electronic sizing and numerical display.
Production of these bearings started in 1975 and to date over 100 different types of special large diameter bearings have been manufactured and successfully used, saving considerable foreign exchange for the country. The Large Diameter Bearings Division is spread over a covered area of 2,508 Sq. Meters.
Quality
At NEI, They have embarked upon system improvement and implemented modern
concepts of Total Quality Management. The company has been accredited with a number
of certifications like ISO/TS 16949:2002 and ISO 9001:2000 by BVQI for the design,
development, manufacture & supply of Ball Bearing, Tapered Roller Bearing and
Cylindrical Roller Bearings, Spherical Roller Bearings, Cartridge Tapered Roller
Bearings, Railway Rolling Stock and Spares in addition to the ISO 14001:1996
certification for ensuring a clean and pollution free environment.
Association of American Rail Roads has approved NEI and granted AAR Approval for
design, manufacture and supply Cartridge Tapered Roller Bearings for Freight Wagons.
We are the leading suppliers of Cartridge Tapered Roller Bearings to Indian Railways since
last twenty years
PRODUCTS RANGE OF BEARINGS MANUFACTURED AND
EXPORTED UNDER THE TRADE MARK OF NBC INCLUDES:
• Ball Bearings • Tapered Roller Bearings • Cylindrical Roller Bearings • Axle Boxes Spherical • Roller Bearings • Cartridge Tapered Roller Bearings • Large Dia Special Bearings
NBC Bearings are widely used by two and three Wheelers, Cars, Trucks, Tractors,
Electric Motors, Railway Wagons, Coaches & Locomotives and also in Steel Mills,
Heavy Engineering Plants, Bulldozers, Shovels, Tillers and Thermal Power Plants all
across the country and overseas.
BALL BEARING
TYPE OF BALL BEARINGS: -
Radial Ball Bearing
Angular Contact Bearing
Self-Aligning Two-Row Ball Bearing
Belt Tensioned
TAPERED ROLLER BEARINGS
TYPE OF TAPERED ROLLER BEARINGS: -
Single Row Tapered Roller Bearing
Double Row Tapered Roller Bearing
NO. OF SIZES: 76
Manufactured at an ultra modern plant, with technology obtained from our earlier
collaborators, Federal Mogul Corporation, USA and now with NTN Corporation, JAPAN,
these bearings are used by all major automobiles, truck and tractor manufacturers in the
country as original equipment.
The above bearings are manufacture in inch & metric series form 15.857mm bore to
95.25mm bore. For TRB NEI has Automatic Grinding Lines with in-process & post
process gauges. Complete automation by Flex link conveyor. Crowning provision on
Inner (Cone) & Outer (Cup). Complete Automatic Line for Roll Grinding, Super finishing,
Inspection and Sorting imported from NTN, Japan automatic checking & prevention of
inverted roller & roller missing. Automatic checking of stand height, noise and run outs.
For TRB, NEI has technical collaboration with NTN Corporation JAPAN, all major
automobile manufacturers as OEM original equipment uses the above bearings.
SPHERICAL ROLLER BEARING-
The above bearing is fitment to broad & meter gauge passenger coaches, for
manufacturing SPHERICAL ROLLER BEARING design, technology, and equipments is
procured from NEI collaborator (NTN JAPAN).
Originally developed in collaboration with Swiss leaders FAG-SRO. Vital for broad
gauge and meter gauge coaches manufactured by ICF, Chennai and RCF, Kapoorthala
for the Indian Railways. Now new sizes are being developed with the help of NTN
Corporation, JAPAN
SPHERICAL ROLLER BEARINGS: -
(Railway Bearing)
NO. OF SIZES: 5
CYLINDRICAL ROLLER BEARINGS &
AXLE BOX ASSEMBLY: -
NO. OF SIZES: 58
Developed by NBC for the Indian Railways for use in rolling stocks. Excellent
performance even in the high speed Rajdhani locomotives, Yugoslavian and Egptyia.
CARTRIDGE TAPER ROLLER BEARING-
Successful Track record in the Railways for the past 30 years, these require no field lubrication. Developed in collaboration with BRENCO Inc. USA, these bearings are being used in all broad gauge wagons of Indian Railways.
This is new box in for upgraded wagons design by RDSO, NEI only manufacturer with
the collaboration with largest manufacturer of the world. Production of this bearing
started from 1989. These bearing are grease packed and require no filed lubrication for
period 7years exporting Cartridge Tapered Roller Bearings for wagon application to M/s
BrencoUSA since 2004.
CARTRIDGE TAPERED ROLLER BEARINGS: -
(Railway Bearing) NO. OF SIZES: 1
NEI has Automatic Grinding Lines with in process gauges to ensure high accuracy
and surface finish. Complete automation by Flex link conveyor. Facility for crowning
on inner race and outer race
LARGE DIA METER BEARING
LARGE DIA SPECIAL BEARINGS: -
Single Row & Double Row Ball, Cylindrical and Four Row Tapered Roller Bearing
NO. OF SIZES: 132
NEI is one of the top 10 manufacturers of LDA bearing & its plant can produced
up to 2000mm Dia meter bearing also, The largest bearing produced by the plant was
4 row tapered roller bearing with 1300mm Dia and weight 4.39 tons.
NEI has Single &Double Spindle Internal and External Grinding. To Capable of Grinding
1000 mm Dia. to 2000 mm Dia.
LONG TERM OBJECTIVE 2008-2014
TO ACHIEVE BY THE YEAR 2013-14
1. A TURN OVER OF RS. 10000 Million 2. EXPORT SALES AS 20% OF TURNOVER &DEVELOP OE CUSTOMERS FOR
EXPORT SALES 3. CONTRIBUTION FROM NEW PRODUCT DEVELOPED IN LASTFIVE YEARS
AT 15% OF SALES TURNOVER 4. INCOME FROM SERVICES TO RS 300 Million 5. INCOME FROM ALLIED ENGINEERING PRODUCTS TO RS 50 Million 6. ROI Pre Tax 24.4% Post tax 17.1% AND BECOME A DEBT FREE
COMPANYCUSTOMER SATISFACTION INDEX OF 95%
ANNUAL OPERATING PLAN 2008-09
TO ACHIEVE
1. TURN OVER OF Rs. 6005.50 Million. 2. EXPORT SALES AS 6.40% OF TURNOVER 3. CONTRIBUTION FROM NEW PRODUCT DEVELOPED IN LAST FIVE YEARS
AT 10% OF SALES TURNOVER 4. INCOME FROM SERVICES TO Rs. 155 Million
ROI - PRE TAX > 20.
Milestones
1946 - Company Established as National Bearing Company (NBC) Under
Technical Collaboration with Hoffman, UK
1950 - Ball Bearing Production Started.
1951 - Railway Bearing Production Started
1957 - Company name changed to National Engineering Industries ltd.
- (Retained NBC as Trade Mark)
1967 - Tapered Roller Bearings Production Started Under Technical
Collaboration with Federal Mogul Corporation, USA
1971 - Established Research and Development Division
1971 - Established MachineBuilding Division
1975 - Large Diameter Special Bearings Production Started
1976 - Spherical Roller Bearings Production started with Technical Know -
- How From FAG-SRO
1981 - Separate Factory for Ball Bearing at Gunsi (Newai)
1982 - Cartridge Tapered Roller Bearings Production Started in Technical
Collaborations with BRENCO Incorporated, USA
1985 - Largest Bearing with outer diameter 1.3 meter and weight 4.39 tons
(4390 Kgs) Produced
1985 - Technical Collaboration with NTN Corporation of Japan for Ball,
Cylindrical and Spherical Roller Bearings
1990-95 - Modernization in Three Phases
1995 - ISO – 9001 Certificate
1996 - Technical Collaboration with m/s Izumi Kinzoku Kogyo Co. ltd
- Japan for Machine Retrofitting/Remanufacturing and Overhauling o
- Grinding and --Super finishing Machines for Bearing Race.
1997 - Technical Collaboration with NTN Corporation of Japan for Tapered
Roller Bearing and Hub Bearings
1998 - IV Phase – Modernization Started
1999 - Implemented 1st Phase of SAP – ERP Solutions
2000 - QS – 9000 and ISO -14001Certification
2003 - TS – 16949Certification
2005 - AAR Certification M – 1003 for Cartridge Tapered Roller Bearing
2006 - New Manufacturing Facility at IMT Manesar (Haryana)
Departments at NEI Ltd, Jaipur
Personnel Division
Taper Division
Research & Development Division
MachineBuilding
Large Diameter Bearing Division
Railway Division
Bearing Division
Ball Department
Ring Rolling Division
Quality Assurance
Metallurgy Division
Sales Department
Budget Department
Accounts Department
ERP/EDP
SISTER CONCERN
Hindustan Motors ltd.
Car plant (lancer), Chennai
Power Product Division, Hosur
Power Unit Plant (ISUZU engines) India
Automobile Division, Uttarpare
GMMCO ltd, Chennai
Hukumchand Jute and Industries ltd, Amlai
Orient Fans, Kolkata
Orient Paper Mills, Amlai
Orient Paper and Industries ltd, Kolkata
Orient Cement, Devapur (A.P.)
Hyderabad Industries Limited, Hyderabad
Birlasoft, Noida
Overseas Companies
Panafrican Paper Mills (EA) Nairobi
NigeriaEngg. Works (NEW) Nigeria
Rivers Vegetable Oil Company ltd, Nigeria
Plants Area
Collaborations
BRENCO Incorporated, USA
Since 1982, for Cartridge Tapered Roller Bearings for Railway wagons and
locomotives
NTN Corporation, Japan
Since 1985, for Ball Bearings, Cylindrical and Spherical Roller Bearings, Clutch
Release Gen- 1, Gen- 2 Wheel BearingsSince 1997, for Tapered Roller Bearings
Izumi Kinzoku Co. ltd, Japan
Since 1996, for re- manufacturing, retrofitting and overhauling of grinding and super-
finishing machines for bearing races.
NBC Bearings are used by all major auto OE Customers in
India Like :-
BAJAJ AUTO
YAMAHA MOTORS LIMITED
KINETIC ENGINEERING
HERO HONDA MOTORS
ROYAL ENFIELDINDIA
TVS MOTOR INDIA(P)LTD
HMSIL
BAJAJ AUTO
FORCE MOTORS
SCOOTERS INDIA LIMITED
MAHINDRA & MAHINDRA LTD.
ATUL AUTO LIMITED
MARUTI UDYOG LIMITED
HINDUSTAN MOTORS
FORCE MOTORS
MAHINDRA & MAHINDRA LTD.
OTHER MAIN CUSTOMER
INDIAN RAILWAY
CROMPTON GREAVES
KIRLOSKAR
GE ELECTRICALS
MICO
TEXMACO
NBC Bearings Exports in following Countries
USA
Japan
Italy
Sri lanka
Indonesia
Bangladesh
Singapore
Nepal
Peru
Pakistan
Brazil
CERTIFICATIONS OF NBC
Awards & Achievement
NEI has bagged some of the most prestigious awards in its field in
various categories:-
Challenge India Support (Engine GP) Award for 2003-04 by Honda
Motorcycles and Scooters India ltd.
Direct On Line (DOL) Award, 2005 by M/s Hero Honda Motors ltd.
Customer’s Delight Award, 2006 by Eicher Motors ltd.
National safety Award from The Government of India
NEI NETWORK IN INDIA
BRANCH OFFICE HEAD OFFICE
DELHIJAIPUR
MUMBAI
PUNE
CHENNAI
WORKSREGISTERED OFFICE
JAIPUR KOLKATA
MANESAR
Current & Future Analysis
The market for bearings in Germany is estimated at US $ 2.7 billion for 2008 and is
projected to be US $ 2.9 billion in 2009. The market is further projected to reach US $
3.1 billion by 2010, growing at a compounded annual rate of 3.8%, during the period
2001-2010.
Ball Bearing is the largest and the fastest growing segment in the German bearing
market and is estimated at US $ 1.3 billion for 2007. The segment is projected to reach
US $ 1.5 billion by 2010, expanding at a CAGR of 4.1%, during the analysis period
2001-2010.
Market Overview
Germany is a leading producer and exporter of machinery and automobiles and is
characterized by a highly competitive market. The market for rolling bearings includes
three major End-users- automobile industry, mechanical engineering, and electric
industry. Automobile and electric sectors in the region consume bearings heavily.
Manufacture of rolling bearings for these sectors is through series production. This kind
of sales offers low profitability and pricing needs to be reasonable low. The machinery
business reflects a different and better picture, as these manufacturers buy standard
bearings in relatively smaller qualities. This kind of production and sales involves higher
profitability and also offers more stable income.
PROJECT DETAIL
STUDY ON SALES PROMOTION IN MARKETING”
INTRODUCTION
“Marketing is a social and managerial process by which individuals and Groups obtain
what they need and want, through creating, offering and exchanging products of value
with others”.
: - PhilipKotler.
Marketing includes all those activities having to do with effecting changes in the
ownership and possession of goods and services. It is that part of economics which
deals with the creation of time, place and possession utilities and that phase of business
activity through which human wants are satisfied, by the exchange of goods and
services for some valuable consideration.
- American Marketing Association.
Marketing is the process of discovering and translating consumer wants into product
and service specifications and then in turn helping to make it possible for more and
more of consumers to enjoy more and more of these products and services.
Marketing Mix
Marketing mix is the set of marketing tools that a firm uses to pursue its marketing
objectives in the target market.
McCarthy has popularized a four factor classification of marketing tools known as the
4P‟s of the marketing mix. They are:
Product
Price
Place
Promotion
Product:
Product stands for the firm‟s tangible offer to the market, including the product quality,
design, features, branding and packing. It deals with new product development, product
life cycle, product mix, product lines, branding and associated services to a product.
From the customer‟s point of view, it helps in satisfying the customer‟s needs and
wants.
Price:
Price is the monetary value of the product. Price deals with selecting the pricing
objectives, setting the price, discounts, allowances, payment policies and credit terms. It
is very important to the customers as it decides the cost the customer has to pay to gain
the product value.
Place:
This marketing tool stands for the various activities the company undertakes to make
the product accessible and available to the customer. It involves market size, channel
selection and management, storage and physical distribution.
Promotion:
Promotion stands for various activities the company undertakes to communicate and
promote its products to the target market. It involves communication programs i.e. direct
marketing, advertising, sales promotions, public relations and motivation of sales force.
To the customer this tool provides knowledge and information.
BRIEF DESCRIPTION OF WORK
The Promotion Mix of a company includes the following tools;
Advertising:
It is any paid form of non-personal presentation and promotion of ideas, goods or
services by an identified sponsor.
Direct Marketing:
It refers to the use of mail, telephone and other non-personal contact tools to
communicate with or solicit a response from specific customers and prospects.
Personal Selling: Face to face interaction with one or more prospective purchasers
for the purpose of making a sale refers to personal selling.
Public Relations and Publicity:
It refers to the variety of programs designed to promote and or protect a company‟s
image or its individual products.
Sales Promotions:
The short-term incentive to encourage trial or purchase of a product or service refers to
sales promotion. Whereas advertising offers a reason to buy; sales promotion offers an
incentive to buy. Since sales promotion directly push up the sales, increasing number of
companies are undertaking sales promotion activities.
Purpose of Sales Promotion
Sales promotion tools vary in their specific objectives. They may be used to attract new
customers, to reward loyal customers and to increase the repurchase rates of
occasional users. Sales promotion usually targets brand switchers because non-users
and users of other brands do not always notice a promotion. Sales promotions are thus
also seen as a tool for breaking down loyalty to other products.
Sales promotions also let manufacturers adjust to short term changes in supply and
demand and differences in customer segments. They also let manufacturers to
experiment by varying prices. Sales promotions also lead to greater
consumerawareness of prices.To use sales promotion, a company must set objectives,
select the right tools, develop the best program and implement it and evaluate the
results.
Objectives of Sales Promotion
The specific objectives set for sales promotions will vary with the type of the target
market. For consumer promotions, objectives include encouraging purchasing of larger
sized units, building trial among non-users and attracting switchers away from the
competitor‟s brands. For trade promotions, objectives may include; including retailers to
carry new items and higher level of inventory, encouraging off-seasonal buying, of-
setting competitive promotions, building brand loyalty of retailers and gaining entry into
new retail outlets. The sales force promotions help in encouraging support of a new
product or model, encouraging more prospecting and stimulating off-seasonal sales. But
most importantly, sales promotion should be focused on consumer relationship building.
Sales Promotion Tools
Many tools can be used to accomplish sales promotion objectives. Descriptions of the
main promotional tools are as follows;
Consumer Promotion Tools
The main consumer promotion tools are as follows;
Samples:
They are offers of a trial amount of a product. It consists of inviting prospective
purchasers to try the product without cost or at a lower cost in the hope that they
will buy the product. Samples may be free or discounted.
Coupons:
Coupons are certificates that give buyers a saving when they purchase a
specified product. Coupons can be mailed, placed in advertisements or included
with other products.
Rebates:
Rebate is also known as cash refund offers. Rebates are offers to refund part
of the purchase price of a product to its customers who send a proof of
purchase to the manufacturer. These are like coupons except that the price
reduction occurs after the purchase and not at the point of sale.
Price Packs:
Cents-off deals or price packs offer consumers savings by way of reducing
prices that are marked by the producer directly on the package.
Premiums:
These are the goods offered either free or at a low cost as an incentive to
buy a product. Premiums may be in-pack or on-pack (outside the pack).
Prizes: They are offers of chance to win something such as cash, trips or goods – by luck or
through extra efforts. Contests of talent and sweepstakes or draws the most popular
prize offering promotions.
Tie-in Promotions: Tie-in promotions involve two or more brands or companies that team up on coupons,
refunds or contests to increase their pulling powers.
Cross Promotions: Cross promotions involve using one brand to advertise non-competing brand.
Advertising Specialties: These are useful articles imprinted with an advertiser‟s name, given as gifts to
consumers.
Patronage Rewards:
They are cash or other awards for the regular use of company‟s products or
services. They are values (in cash otherwise) that are proportional to one‟s
patronage of a certain vendor or a group of vendors. They aim at building brand
loyalty.
PoP Promotions:
Point of purchase (PoP) includes displays and demonstrations that take place at the
point of purchase or sale.
Trade Promotion Tools
More money is spent by companies on trade promotion (58%) than on consumer
promotions (42%). The major trade promotion tools are as follows;
Discounts:
It is also known as price-off or off-invoice or off-list. Discounts price cut off the list
price on a particular quantity purchased during a stated time.
Allowances:
They are the amount offered in return for an agreement by the retailer to feature the
manufacturer‟s products in some way; displays, advertising or otherwise.
Free Goods:
Free goods are the extra merchandise offered to middlemen who buy a specific
amount of a product.Companies also offer push money and specialty advertising
items to the middlemen
RESEARCH METHODOLOGY
The researcher has done the research in the following manner;
a) Type of the research undertaken is analytical.
b) Technique used is random sampling.
c) Sample size taken is 30.
d) Sources of data used include both primary as well as secondary data.
e) Tool used for the research is questionnaire.
f) Plan of analysis are tables and graphs.
Data Collection Methods
In this study, the foremost data collection instrument used is the questionnaire method.
The questionnaire has been designed with both open ended and closed ended
questions. Apart from this, the research instrument consists of primary and secondary
data collected for the study.
Primary Data:
Here first hand information is obtained by distributing printed questionnaire to the marketing
executives of the company. Data was also obtained from the observation and interview
technique adopted by the researcher. Moreover, information was disseminated by the
departmental heads.
Secondary Data:
Here the information is obtained from the brochure of FerrorDek, books, websites,
newsletter, journals, magazines, newspapers, etc.
SOURCES OF DATA
Primary Data Secondary Data
Questionnaire Newsletter
Observation Journals
Interviews Magazines
Visits to other Newspapers
Companies Information BooksThrough
Departmental heads Websites
DATA ANALYSIS
Original Equipment Manufacturers (OEM) Market
The OEM market for bearing represents the demand arising out of the original vehicle
and industrial manufacturers. The demand for the OEM market directly depends upon
the growth in user industry. OEM market accounts for 60% of total demand of bearing
industry. This market is characterized by requirements of high quality, stringent delivery
norms and ower margins.
OEM‟s have been facing price competition in their own markets; continue to exert price
pressure on the local bearing suppliers. The bearing capacity available in the country is
in excess of demand, resulting in price reduction. The OEM bearing market is likely to
witness better days ahead on account of upswing in automobile industry and
manufacturing sector
Replacement Market
The replacement market represents the demand arising on account of replacing the
used and worn-out bearings. The size of replacement market is dependent on
equipment population and frequency of maintenance. Replacement market accounts for
40% of total demand for bearing industry. The margins in this market are relatively
higher placed as compared to OEM market.
The replacement market is highly price sensitive and has higher share of unorganized
players and cheaper imported bearings.
Common Area of Bearings Applications
Largest Application (by volume) - Bearing Type Used
Engineering - Deep Groove
Trains, Machine Tools - Cylindrical
Cars, Various - Spherical
Industrial Vehicles (Trucks,
Construction Vehicles) - Tapered
Engines (Diesel& Petrol), Gearboxes - Needle
NEI’S MARKET SHARE
NRB 9%
TIMKEN 8%
ABC 6%
TATA 9%
FAG 15%
SKF 20%
NEI 29%
HMT 4%
EXPORT MARKET SHARE OF INDIAN BEARING INDUSTRIES
20011-12 (VALUE)
FAG
34%
TIMKEN
12%
ABC
0%NEI
14%
NRB
2%
SKF
38%
NEI SHARE IN DIFFERENT SEGMENTS
IN YEAR 2011-12
Ball Bearing
Tapper Bearing
Ball Bearing
0
10
20
30
40
50
60
2&3
Wheeler
Cars C.V. MUV Tractor
Ball Bearing Percentage
Tapper Bearing
0
5
10
15
20
25
30
35
40
45
Cars C.V. MUV Tractor
Tapper Bearing
Percentage
FACTS ANDFINDINGS
SUMMARY OF FINDINGS
A Summary of Findings:
The finding can be grouped together into two broad categories such as;
Specific Findings:
This is pertaining to the objectives of the study.
General Findings:
This is with regard to the market dynamics and visits made by the researcher
to companies having almost similar products profile.
Specific Findings:
The company adopts a variety of promotional methods such as paper insertion,
telemarketing, display stalls, participating in exhibitions, direct mail, presentations and
showroom.
1. Transparency is maintained at the levels of the organization.
2. The products are marketed through direct marketing (showroom) and dealers
are involved in the marketing process.
3. The activities carried out by each and every department of the organizations
systematic.
General Findings:
1. Foreign companies can invest up to 100% in most of the manufacturing
industries in India.
2. With the vast array of modular option available in market, the consumer isn‟t
really strapped for choice.
3. Italian manufacturers have now entered the Indian markets. Moreover, furniture
made from Asian Teak Wood which is available in the rich rain forests of
Malaysia is flooded in the Indian market. In a nutshell, this means to say that the
competition is very intense.
4. Many branded companies outsource the products because of which the delivery
time of the product ordered is stretched.
5. “Quality never comes cheap”. This is true but at the same time, it is also true that
quality can come at a reasonable price, With regard to the quality.
6. Majority of the marketing executives are male.
CONCLUSION
“No man has the right to dictate what other men should perceive, create or produce, but
all should be encouraged to reveal themselves, their perceptions and emotions and
builds confidence in their creative spirit!”
This inspiring thought of Ansell Adams is well appreciated by new style marketing
organizations which understand that “boxes and lines” structures can‟t drive value in
fast moving environments. No doubt, that NEI is one of them because they believe in
teamwork. Today, the need of the Indian consumer evolves beyond “roti,
kapadaaurmakaan”. To capture opportunities continually, the company must have a
continual flow of ideas. Transforming a pipeline full of ideas into a value – generating
portfolio of products and services is hard. Herein, lays the importance of co-ordination.
1. Production data of other automobile is very important for bearing industry.
2. Demand data is also very important for bearing industry.
3. NBC supply 29% of bearing in Indian market, rest other company supply.
4. India‟s first bearing company having maximum sizes.
5. India‟s largest bearing company.
RECOMMENDATION&SUGGESTIONS
RECOMMENDATIONS
1. It‟s overwhelming to find out that the organization works in a systematic manner.
A blend of co-ordination will definitely enhance the performance of the company
2. Quality clubbed with reasonable pricing and quick delivery made the product of
the company stand apart. The marketing campaign should focus on this aspect
and made according to its line.
3. The strength of the company is its customized products. This very fact must be
highlighted in the marketing campaign.
4. As the products are reasonably priced, the ambit of the target consumers should
be stretched so that middle class consumers also fit into it.
5. The company must stick to a norm while giving discounts on repeat purchase.
This will certainly help in sales promotion in order to create repeat purchase.
Suggestions
1. Everyone is aware of the growth in wealth and change in lifestyle.So the
marketing campaign should be designed to woo the customers.
2. The company should explore all possible ways in order to aggressively sell its
products. So, the company can register itself in Bearings.co.in as it is India‟s
biggest online B2B plan with largest virtual Bearings directory.
3. The Motors industry is in boom. In order to tap the potential market, the
Company can advertise in a magazine. This will help in showcasing the products.
This can add an extra spice to sales.
4. In today‟s crowed market place in order to increase the size of the pie, the
Company can adopt innovative promotional strategies. It will help in creating and
reinforcing the Company‟s identity in the minds of the consumer.
5. In order to be extra ordinary, the Company has to walk the extra mile. A method
named „Experimental Marketing‟ can be adopted by the Company wherein the
prospective consumers can be invited to visit the showroom and touch and feel
the products.
6. Since the competition is intense, so there should be some value addition so as to
make the Company stand apart in the market. One such way is to improvise the
customer service.
7. Consumer is the king in the market. This fact should be deeply rooted in the
minds of the employees. The Company can adopt some ways to listen to the
customer‟s feedback which should be noted in writing so that it will help in
continual improvement and make the company to be in the right track always.
8. Moreover, a sense of involvement will be felt by the customers whish can give
the company a cutting edge.
9. To collect demand data of automobiles company on time.
10. NBC should send their product catalogue to all automobile companies.
11. Try to increase their supply in Indian market.
12. Try to build new foreign automobile customers.
13. Try to make brand awareness in customer‟s eyes
14. Try to increase product visibility among general public.
APPENDIX
Questionnaire
1. What are the different types of Bearings that the NEI Manufacture?
2. What types of Bearings does the NEI Exports. Suggest
3. Where NEI Exports Bearings?
4. What are the different types of sizes that NEI have
5. Who are main customers of NEI in Automobiles sector
6. How Modes of Entry helps NEI to extend its Business?
7. How Important Is MUV‟s and CV‟s Segment For a Company?
8. What steps should be taken while entering into the Country?
9. What is the Marketing Strategies of NEI?
10. NEI should focus on which Market?
11. Do you think that Automobile sector is the Major Market of Bearings for NEI?
BIBLIOGRAPHY
BIBLIOGRAPHY
www.bearingindustry.com
www.commerce.nic
www.cbi.edu
NEI Literature
www.oica.net
Global Bearing Market
www.neibearing.com