AUCTION #1

MAJOR OFFERING: (2) ONLINE AUCTIONSCNC MACHINE SHOP • MULTI MILLION DOLLAR INVENTORY • PRODUCT LINES

•TRADE NAMES • SPECIALTY MACHINERY By Order of the Secured Creditor

Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA

Navtec Fiber Winding Machine Model WBP-1-4-120-OMNIPC

Complete CNC Machine Shop & Support EquipmentSale Date: Thursday, April 6, 1:00 PM (ET)

Navtec Heading Press (-540)

Eurotech Biglia CNC Turning Center Model B1200LY

Ikegai CNC Turning Center Model TU30L

2” Capacity

New 2002

New 2010

Navtec Hydraulic Pull Tester 200,000 lb. Cap.

Kitamura CNC Vertical Machining Center Model MyCenter 3Xi

200,000 lb. Cap

New 2005

1 of 3

Intellectual Property, Inventory & Specialty MachinerySale Date: Wed., April 5, 1:00 PM (ET)

Sale under Management of:Thomas Industries, Inc.

2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727

email: gavel@thomasauction.com www.thomasauction.com

Inspection: Tues & Weds, April 4 & 5, 9 AM to 4 PM (ET)

AUCTION #2

AUCTION #1 - WEDNESDAY, APRIL 5 • FIRST LOT CLOSES AT 1:00 PM (ET)Intellectual Property - Inventory - Specialty Machinery

Open HOuse InspectIOn: tues & Weds, AprIl 4 & 5, 9 AM tO 4 pM (et)2

INTELLECTUAL PROPERTYTrademarks/Brands: Navtec, Navtec Rigging Solutions, Inc., Norseman

Gibb, TFC, Navtec AT CableProduct Lines: Hydraulic, Carbon, Norseman Gibb, Rod Rigging and

Fiber, Including: Product Drawings, Blue Prints, Process Sheets, Vendor Information, etc.

INVENTORY – BY PRODUCT LINEHydraulic: Approximately $650,000, Un-Audited.Carbon: Approximately $45,000, Un-Audited.Norseman Gibb: Approximately $325,000, Un-Audited.Rod Rigging: Approximately $1.1 Million, Un-Audited.Fiber: Approximately $300,000, Un-Audited.

NAVTEC – HEADING PRESSESNavtec Heading Press (-540),

Hydraulic, 600 Ton, 2” Bar Capacity

Navtec Heading Press (-91), Air Over Hydraulic, 7/8” Bar Capacity, Mounted on Blue Cart

Navtec Heading Press (-76), Hydraulic, 10,000 PSI

Navtec Heading Press (-60), parts machine

NAVTeC HeADING PreSS (-540) NAVTeC HeADING PreSS (-91)

NAVTeC HeADING PreSS (-76) LArGe ASSOrTMeNT OF DIeS FOr HeADING PreSSeS

2”Capacity

7/8”Capacity

AUCTION #1 - WEDNESDAY, APRIL 5 • FIRST LOT CLOSES AT 1:00 PM (ET)Intellectual Property - Inventory - Specialty Machinery

All IteMs In AuctIOn #1 suBJect tO prIOr sAleserIOus InQuIrIes cOntAct tOM GAGlIArdI III At 203-458-0709 X102 3

NAVTEC - WINDING MACHINENavtec Fiber Winding Machine Model

WBP-1-4-120-OMNIPC S/N J2485 (New 2005), 100’ Winding Bed w/ Powered Taping Carriage, 100’ Braiding Bed w/ Tail Stock and Heat Stock, Manually Operated, 64 Spool Capacity Braider Moved on Tracks

NAVTEC - ROD STRAIGHTENERNavtec Rod Straightener w/ 5’

Diameter Horizontal Payoff reel, (2) Hydraulic Straightening Heads, (1) Brand New Straightening Head in Crate

NAVTeC HyDrAULIC PULL TeSTer, 2-LOAD CeLLS

LArGe INVeNTOry OF GAMMA BAr rOD rIGGING

(2) NAVTeC A-FrAMe HyDrAULIC PreSSUre TeSTerS

New 2002

NAVTeC FIBer WINDING MACHINe MODeL WBP-1-4-120-OMNIPC

NAVTeC rOD STrAIGHTeNer

CArBON STrANDING UNITS W/LeAD WeIGHTS

New2005

NAVTeC HyDrAULIC FATIGUe TeSTer

NAVTEC - CARBON RIGGINGNavtec Carbon Rigging Equipment Consisting of: Hydraulic Testing

Benches, (4) Lead Weight Carbon Stranding Machines, Heating Benches, Assorted Dies and Inserts

NAVTEC - TESTINGNavtec Hydraulic Pull Tester, 200,000 Lb Capacity, 2-Load Cells,

3-Hydraulic Cylinders enclosed in 5’ x 20’ Wooden Case w/ Top Covers, Acu-rite III DrO, CIB Day & Night Color Camera System, Hydraulic Pump Unit, PC Based Controls

Tinius Olsen Tensile Tester, 60,000 lb. Tester(2) Navtec A-Frame Hydraulic Pressure TestersNavtec Hydraulic Fatigue TesterNavtec Hydraulic Cylinder Tester w/ 2’ x 10’ explosion Coffin, enerpac

P228 Hydraulic Pump

200,000 lb. Cap

1 of 4

1 of 4

BULK BID OFFERING All items will be listed individually.

Following the bidding of the individual items a bulk bid lot will be offered

including all items. The individual bids will be totaled and the Bulk Bidding will start at an increment 10% higher than

the sum of the individual bids. If a Bulk Bid is received the individual bids will be voided and the Bulk Bidder will prevail.

AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) Complete CNC Machine Shop

OnlIne AuctIOn – Internet BIddInG OnlY – WWW.tHOMAsAuctIOn.cOM4

CNC – TURNING CENTERSEurotech Biglia CNC Turning Center Model B1200Ly,

S/N 10862 (New 2010), Fanuc 31i-A CNC Control, Live Tooling, (12) Tool Turret, C-Axis, Tailstock, Chip Conveyor

Leadwell CNC Turning Center Model LTC-25CXL, S/N L2TJH0893 (New 2009), Fanuc Oi-TC CNC Control, 12-Position Turret

Ikegai CNC Turning Center Model TU30L S/N T5533-09/53914V (New 2002), Fanuc Series 18i-T CNC Controls, 12-Postion Turret, Sub Spindle, 16” 3-Jaw Chuck, Chip Conveyor, 40 Taper Tooling

Takisawa CNC Turning Center Model TW-30 S/N C9712097-251 (New 1997), Fanuc Series 21-T CNC Controls,12-Position Turret, Sub Spindle, Chip Conveyor, Coolant System, LNS Hydrobar Hydraulic Bar Feeder w/ Hydraulic Unit

NC - LATHEHarrison CNC engine Lathe Model Alpha 550 Plus,

S/N A50520 (New 1998), Ge Fanuc Alpha CAM Operated Control, 20” Swing x 80” Between Centers, 15-1800 rPM Spindle Speeds, 16” 3-Jaw Chuck, Coolant System

HORIZONTAL BAND SAWSCosen Horizontal Band Saw Model C320ZNC-CF, S/N

C961475 (New 2007), Twin Column Automatic, 12 1/2” x 15” Cutting Capacity, Hydraulic Clamping, 5 HP Drive, Numeric Controls

Hyd-Mech Horizontal Band Saw Model S-20A Series II, S/N 809972900 (New 1997), 13” x 18” Cutting Capacity, 5 HP Drive, Hydraulic Clamping, roller Out Feed Table

TAkISAWA CNC TUrNING CeNTer MODeL TW-30

HArrISON CNC eNGINe LATHe MODeL ALPHA 550 PLUS

kITAMUrA CNC VerTICAL MACHINING CeNTer MODeL MyCeNTer 3XI

eUrOTeCH BIGLIA CNC TUrNING CeNTer MODeL B1200Ly

LeADWeLL CNC TUrNING CeNTer MODeL LTC-25CXL

IkeGAI CNC TUrNING CeNTer MODeL TU30L

New 2010

1 of 3

MATSUUrA CNC VerTICAL MACHINING CeNTer MODeL MC-760V2

COSeN HOrIZONTAL BAND SAW MODeL C320ZNC-CF

HyD-MeCH HOrIZONTAL BAND SAW MODeL S-20A SerIeS II

New 2007

New 2009

New 2002

New 1997

BrIDGePOrT 1.5 HP VerTICAL MILLING MACHINe

1 of 3

AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) CNC Machining & Turning Centers - Toolroom - Plant Support

Open HOuse InspectIOn: tuesdAY & WednesdAY AprIl 4 & 5, dOOrs Open At 9 AM (lOcAl tIMe). 5

CNC - VERTICAL MACHINING CENTERS

Kitamura CNC Vertical Machining Center Model MyCenter 3Xi, S/N 12388, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T-Slot Working Table, Parts Catcher, Coolant System, 12” 3-Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling

Kitamura CNC Vertical Machining Center Model MyCenter 3Xi S/N 12086, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T Slot Working Table, Parts Catcher, Coolant System, 12” 3 Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling

Kitamura CNC Vertical Machining Center Model MyCenter 3Xi, S/N 12079, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T Slot Working Table, Parts Catcher, Coolant System, 12” 3 Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling

Matsuura CNC Vertical Machining Center Model MC-760V2, S/N 83063288 (New 1983), Matsuura eN4-0429A CNC Controls, 30 Position ATC, Coolant System, yuasa Indexer, 6” Machine Vise, 40 Taper Tooling

MILLING MACHINES - VERTICALBridgeport 2 HP Vertical Milling Machine

S/N 12Br245964, , 9” x 42” Table, Acu-rite 2 Axis DrO, Power Feed

Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br132297, 9” x 42” Table, kurt 6” Machine Vise, Sony Millman 2 Axis DrO

Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br223809, 9” x 42” Table, Power Feed, kurt 6” Machine Vise, Acu rite Qwik Count 2 Axis DrO

Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br166935, 9” x 42” T Slot Table, Power Feed, kurt 9” Machine Vise

kINWA eNGINe LATHe MODeL CHD760X2300 rOMI eNGINe LATHe MODeL 16-8 16”

STANDArD MACHINery SWAGer MODeL#4

kINWA eNGINe LATHe MODeL CHD760X3000

New 2008

New 2008

CUSTOMer HyDrAULIC 4-POST PreSSeS

GrOB VerTICAL MeTAL CUTTING BAND SAW

MITUTOyO OPTICAL COMPArATOr MODeL PH-A14

1 of 4

QUINCy 25 HP rOTAry SCreW AIr COMPreSSOr MODeL QGB-25

X 80”CC

LArGe PArTS INVeNTOry: CArBON/HyD/NOrSeMAN

AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) Forklifts - Trucks - Raw Materials

OnlIne AuctIOn – Internet BIddInG OnlY – WWW.tHOMAsAuctIOn.cOM6

MILLING MACHINES - HORIZONTAL

Cincinnati Horizontal Milling Machine Model #2, S/N 2A2U1L-48, 12” x 52” Slot Table

SURFACE GRINDERSBridgeport Surface Grinder

Model 815, Hand Feed, 8” x 15” Walker Ceramic Magnetic Chuck, Over Wheel Dresser

SWAGER MACHINESStandard Machinery Swager

Wire Drawing/reducing Machine Model #4

Synflex Coupling Swaging Machine

STePHeN BADer CONTINUOUS GrINDer AND POLISHING MACHINeS

DAreX DrILL GrINDer & SHArPeNer MODeL AP5100

WILTON HD BeNCH VISeS

CHeVy PICkUP TrUCk MODeL SILVerADO 1500

CATerPILLAr 5000 LB LPG FOrkLIFT MODeL GP25

New 2009

1 of 2

VIDMAr CABINeTS SPANCO 1-TON A-FrAMe GANTry rAW MATerIALS

$300,000+At Cost

LATHESKinwa engine Lathe Model CHD760X3000, (New 2008), 30” Swing x 118” CC,

Inch/Metric Threading, 20-1200 rPM Spindle Speeds, Cross Feed, Tool Post, 16” 3-Jaw Chuck, Coolant System, DrO-201 2-Axis DrO

Kinwa engine Lathe Model CHD760X2300 S/N CH08839 (New 2008), 30” Swing x 90” CC, Inch/Metric Threading, 20-1200 rPM Spindle Speeds, Cross Feed, Tool Post, 12” 3 Jaw Chuck, Coolant System

Romi engine Lathe Model 16-8, S/N 060279B, 16” Swing x 80” CC, Inch/Metric Threading, 56-1120 rPM Spindle Speeds, 12” 3 Jaw Chuck, Tool Post, Coolant System

Cadillac engine Lathe Model 1428 14” Swing x 28” CC, 8” 3 Jaw Chuck, Inch Threading, 55-1800 rPM Spindle Speeds, Tool Post, Tail Stock

Warner & Swasey Turret Lathe Model 3 S/N 2352975, Cross Feed, 6-Position Turret System

Jones & Lamson Turret Lathe Model 7B#4 1/2, 6-Position Turret

HYDRAULIC PRESSES (3) Customer Hydraulic 4-Post Presses

VIeW OF CNC TOOL HOLD CArTS

1 of 4

cOMplete lOt cAtAlOG, reGIstrAtIOn & BIddInG At WWW.tHOMAsAuctIOn.cOM

AUCTION INFORMATION

7

Buyer’s Premium: 15%

Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Friday, April 7, 2017

Payment Types: Certified Check or Wire Transfer

As-Is Where-Is: All Items Are Sold “As-Is Where-Is” With No Warranty or Guarantee of Operating Condition. Auctioneer Strongly recommends That Buyers Inspect equipment Prior to Bidding.

*The above terms and dates apply to both Auction #1 and Auction #2

Removal: All items must be removed by Friday, April 21, 2017. NO eXCePTIONS. removal Hours: 9 AM to 4 PM (M-F).

Removal Costs: Buyers are fully responsible for all cost to remove their purchases. Please get removal quotes prior to bidding and bid accordingly.

TECHNICAL INFORMATION Tom Gagliardi III (203) 458-0709 x102PAYMENT INFORMATION Irina Lekhmus (203) 458-0709 x108ONSITE INFORMATION John Standish (203) 915-3430

THOMAS INDUSTRIES 2414 Boston Post Road

Guilford, CT 06437-2310(203) 458-0709

(203) 458-0727 Faxwww.thomasauction.com

Under Management of:

Complete Terms & Conditions at www.thomasauction.com

MAJOR OFFERING: (2) ONLINE AUCTIONSBy Order of the Secured Creditor

Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA

VERTICAL BAND SAWSGrob Vertical Metal Cutting

Band Saw S/N 13699 w/ Grinder

INSPECTION - TESTING EQUIPMENT

Mitutoyo Optical Comparator Model PH-A14, S/N 906005, Mitutoyo QM-Data 200 Digital readout

Rockwell Hardness Tester Model 3Jr, S/N 3Jr-5553

VEHICLESChevy Pickup Truck Model

Silverado 1500, VIN #1GCek14CX9Z234150 (New 2009), 4x4, Cloth Interior, Automatic Transmission, Bed Liner, roof rack

TOOL & CUTTER GRINDERSK.O. Lee Tool & Cutter Grinder

5” x 26” Table, Universal Grinding Wheel Head, Motorized Work Head, Tail Stock

AIR COMPRESSORS - DRYERS

Quincy 25 HP rotary Screw Air Compressor Model QGB-25, Mounted on Horizontal Air Tank

Quinch 25 HP Horizontal Tank Air Compressor Model QT25ST2000083, S/N 20021024-0190

Caterpillar 5000 lb LPG Forklift Model GP25, S/N 5AM02876, 190” Mast, Side Shift, 2 Stage Mast, Solid Tires

PLANT SUPPORTGorbel 2000 lb. Free Standing Bridge Crane

System, w/ Cofing 1-Ton Chain Hoist, Approx. 20’ Span x 50’ runway

(4) Stephen Bader Continuous Grinder and Polishing Machines, Model Space Saver

Darex Drill Grinder & Sharpener Model AP5100 Bench Top

Parker Hose Crimper Model Minikrimp, (4) Wilton HD Bench Vises, (2) Vidmar Cabinets, Spanco 1-Ton A-Frame Gantry w/Chain Hoist, Ajax radial Drill Press, Jet 8” Belt/12” Disc Sander, Kalamazoo 14” Chop Saw, Manhattan Pedestal Drill Press Model 951225, Rother 10 Ton Pneumatic Press

Miscellaneous Support: Pallet racking, Cantilever racking, Industrial Fans, Work Benches, Vises, racks, Shelving, Hand Trucks, Forklift Man Lift, Pallet Jacks, Job Boxes, Bench Grinders, Hand Tools, Power Tools, Vacuum Tank w rectifiers, (2) 29” x 93” Interior Dimensions Poly Soap Cleaning Tanks, etc.

AUCTION #1 Intellectual Property, Inventory & Specialty Machinery

Sale Date: Wed., April 5, 1:00 PM (ET)

AUCTION #2 Complete CNC Machine Shop & Support Equipment

Sale Date: Thursday, April 6, 1:00 PM (ET)

Inspection: Tues & Weds, April 4 & 5, 9 AM to 4 PM (ET)

FORWARDING SERVICE REQUESTED

PRESORTED FIRST CLASS MAIL

U.S. POSTAGE

PAIDPermit No. 80

Milford, CT

THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

(2) MAJOR ONLINE AUCTIONSBy Order of the Secured Creditor

Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA

AUCTION #1INTeLLeCTUAL PrOPerTy, INVeNTOry & SPeCIALTy MACHINerySale Date: Wednesday, April 5, 1:00 PM (ET)

AUCTION #2COMPLeTe CNC MACHINe SHOP & SUPPOrT eQUIPMeNTSale Date: Thursday, April 6, 1:00 PM (ET)

Buyer’s Premium: 15%

By Order of the Secured Creditor

Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA

COMPLETE CNC MACHINE SHOP – INTELLECTUAL PROPERTY - INVENTORY

Large Parts Inventory: Carbon/Hyd/Norseman Leadwell CNC Turning Center Model LTC-25CXL

New 2009

AUCTION #1 Sale Date:

Wednesday, April 5, 1:00 PM (ET)

AUCTION #2 Sale Date:

Thursday, April 6, 1:00 PM (ET)

Sale under Management of:Thomas Industries, Inc.

2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727

email: gavel@thomasauction.com www.thomasauction.com