Natural Wicker Basket Install

7/28/2019 Natural Wicker Basket Install

1/5

ELECTRA BICYCLE COMPANY

,LLC. 3270 CORPORATE VIEW, SUITE A, VISTA, CA 92081TEL 760-607-2453 ORDERLINE 800-261-1644 FAX 760-598-7350 WWW.ELECTRABIKE.COM

EBC_#368742_INSTR_FEB12

Natural Wicker Basket Installation Instructions(EBC PN: #368742, #368809 and #368770)


2/5

Natural Wicker Basket Installation Instructions

Designed to ft most adult bicycles with threaded headsets.

DIFFICULTY LEVEL: Easy

I you are not comortable installing basket, please have it proessionally installed by your Electra dealer.

1) Tools Needed

Slotted screwdriver

Phillips screwdriver

10mm open end or box wrench (or small

adjustable wrench)

32mm open-end wrench or bikes with 1

headsets (or large adjustable wrench)

36mm open-end wrench or bikes with 1 1/8

headsets (or large adjustable wrench)

6mm hex head wrench

2) Parts List

(1) Wicker basket

(2) Leather straps

(2) Nylon lock nuts

(2) 30mm long Phillips head machine screws

(4) Steel washers

(1) Steel inner plate (7cm wide x 1.8cm tall)

(1) Headset bracket or 1 headset-equipped

bikes

(1) Headset bracket or 1 1/8 headset-equipped

bikes




3/5

STEP 1: Installation of headset bracket

1) Remove stem/handlebar combination

using a 6mm hex wrench

2) Remove top nut using 32, 36mm or

adjustable wrench and set aside

3) Remove steel keyed washer (save or uture

use i basket is no longer installed)

4) Install mounting bracket in place o key

washer, lip side aces up

5) Reinstall top nut using 32, 36mm or

adjustable wrench

6) Reinstall stem/handlebar combination

using a 6mm hex wrench

Note: Most Electra Cruiser models use 1

headsets while steel-ramed Amsterdam models

use 1 and aluminum-ramed Amsterdam models

and Townie models use 1 1/8 headsets. I

mounting to a late-model Townie, it is necessary

to remove the conical headset spacer. Put

spacer aside or uture use i basket is no longer

installed. I you are unsure o the size o your

headset, contact your local Electra dealer.



STEP 1:4-5

STEP 1:1-2 STEP 1:3


4/5

STEP 2: Attaching headset bracket to basket

1) Line up basket so that it the top edge sits

above the handlebar

2) Note position o headset bracket and punch

holes in the wicker that line up with the

bracket, using a screwdriver or similar

3) Push Phillips head bolt and washer through

the inner plate, wicker and headset bracket

4) Install 10mm nylon lock nuts, tighten



STEP 2:2

STEP 2:3

STEP 2:4


5/5

STEP 3: Threading leather straps throughwicker slats

1) Use a slotted screwdriver to spread the wickerapart and push strap through rom outside

2) For the top strap position, again use a slottedscrewdriver to spread the wicker apart, this timerom the inside

3) Buckle the strap on the outside o the basket

I you have questions regarding assembly,

please visit your local Electra dealer or call

Electra Customer Service at 800-261-1644

(8AM 4PM Pacifc Time).

Electra Bicycle Part Numbers:368742 Wicker Basket, natural

368770 Wicker Basket w/Gypsy Liner, natural

368809 Wicker Basket, white



STEP 3:1

STEP 3:3

Natural Wicker Basket Install

Documents

Transcript of Natural Wicker Basket Install