NATIONAL ELECTRICAL CODE CODE-MAKING PANEL 18 NFPA …
Transcript of NATIONAL ELECTRICAL CODE CODE-MAKING PANEL 18 NFPA …
NATIONAL ELECTRICAL CODE® CODE-MAKING PANEL 18
NFPA 70 First Draft Meeting Agenda
January 15 - 17, 2018 Hilton Head, SC
1. Call to Order. Bobby Gray, Chair
2. Introductions.
3. Approval of Previous Meeting Minutes (Attachment A)
4. Staff Updates. NFPA Staff
• Committee membership update. (Attachment B)
• Annual 2019 revision cycle schedule. (Attachment C)
• Overview of NFPA Process.
5. Review of Public Inputs
6. Old Business.
7. New Business.
8. Next Meeting, San Diego, CA, October 22 – November 3, 2018, schedule to be determined.
9. Adjourn.
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 1 of 10
Attachment A: Previous Meeting Minutes
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 2 of 10
Chairman’s Report for NEC CMP 18 ______________________________________________
1) NEC Second Draft Meeting, San Diego, CA
Scheduled: November 5‐7, 2015 Actual: November 5‐6, 2015
2) List names of guests in attendance is attached.
3) List names of guests addressing the Panel, the subject of their address, and the length of time they spoke: a. Amy Cronin, spoke for 15 minutes in support of adding a definition and other
actions regarding PCs related to a new quick release technology for receptacles attaching luminaires and ceiling fans.
b. Michael Johnston spoke for 10 minutes in support of a PC revising the marking on automatically controlled receptacles.
c. Keith Lofland spoke for 5 minutes explaining the scope and purpose of a CC‐appointed task group evaluating the benefits of a global change to add words related to listed and labeling.
4) Number of Public Comments acted upon: 63 5) Number of Second Revisions created: 28 6) There were no Task Groups appointed to work subsequent to the Second Draft Meeting.
7) There are no requests for that require NEC Correlating Committee attention.
8) There are no comments or SRs that should to be referred to another panel for information or correlation
9) There are no Comments or SRs that should be referred to the Toxicity Advisory Committee.
10) List all PCs or SRs related to combustibles in plenums or other air handling spaces: SR 5124 addresses low voltage wiring in plenums and other spaces.
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 3 of 10
11) There are no new issues or requests for the NFPA Research Foundation at this time.
12) The panel has no requests for information or assistance from the NEC Correlating Committee at this time.
13) Provide any additional information that you feel would be helpful to the NEC Correlating Committee, staff, or to the process in general: CMP 18 was made aware that the CC had assigned a task group to review and recommend global actions related to adding the words “and labeled” wherever “listed” is used. The panel took a straw poll to determine the opinion of the panel on this issue. The informal vote was overwhelmingly in favor of the action, with only one negative opinion. This information can be passed to the task group. Additionally, CMP 18 recommends that if the direction from the task group is to make the global change, a change must be made to the definitions of both terms, including associated informational notes.
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 4 of 10
Panel 18 Members in attendance:
Bobby Gray National Electrical Contractors Association
Frederick Carpenter National Electrical Manufacturers Association
Kurt Clemente Institute of Electrical & Electronics Engineers, Inc.
Paul Costello International Brotherhood of Electrical Workers
Hakim Hasan Intertek
Jack Jamison International Association of Electrical Inspectors
Charles Kurten UL LLC
Michael O’Boyle American Lighting Association
Wesley Wilkens International Sign Association
Randall Wright RKW Consulting
Donald Berlin American Lighting Association
Steve Campolo National Electrical Manufacturers Association
Joseph Chandler Independent Electrical Contractors, Inc.
Richard Hollander International Association of Electrical Inspectors
Paul Yesbeck National Electrical Contractors Association
Guests in Attendance
Michael D. Fontaine NESG/SQL
Amy Cronin Strategic Code Solutions for Safety, LLC
Don Iverson NEMA
Keith Lofland IAEI
Jack Lyons NEMA
Kevin Lippert Eaton
Mike Johnston NECA
James T. Dollard, Jr. IBEW
John Masarick IEC
Paul Dobrowsky Inn
David Clements IAEI
Brian E. Rock Hubbell Incorporated
Stan Folz Morse Electric
Patty Barron SQL
Mark C. Ode UL
Lynn Lupo NFPA
Jacquelyn Doucette NFPA
Staff Liaison
Kim Shea NFPA
Dan Gorham NFPA
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 5 of 10
Attachment B: Code-Making Panel Roster
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 6 of 10
Address List No PhoneCode-Making Panel 18 NEC-P18
National Electrical Code®
Mark W. Earley12/19/2017
NEC-P18
Bobby J. Gray
ChairHoydar/Buck, Inc.PO Box 146Selah, WA 98942National Electrical Contractors AssociationAlternate: Paul Yesbeck
IM 10/20/2010NEC-P18
Ron D. Alley
PrincipalNorthern New Mexico IEC5031 Indian School Road NE, Suite 100Albuquerque, NM 87110Independent Electrical Contractors, Inc.Alternate: Mark Coshal
IM 10/29/2012
NEC-P18
Frederick L. Carpenter
PrincipalAcuity Brands Lighting1 Acuity WayDecatur, GA 30035National Electrical Manufacturers AssociationAlternate: Steve Campolo
M 1/16/2003NEC-P18
Kurt J. Clemente
PrincipalClark Nexsen, Inc.4525 Main Street, Suite 1400Virginia Beach, VA 23462Institute of Electrical & Electronics Engineers, Inc.
U 10/18/2011
NEC-P18
Paul Costello
PrincipalNECA and IBEW Local 90 JATC2 North Plains Industry RoadWallingford, CT 06492International Brotherhood of Electrical WorkersAlternate: William F. Laidler
L 1/18/2001NEC-P18
Hakim Hasan
PrincipalIntertek1950 Evergreen Blvd., Suite 100Duluth, GA 30096-9079
RT 8/9/2011
NEC-P18
Jack E. Jamison, Jr.
PrincipalMiller Engineering, Inc.991 River RoadMorgantown, WV 26501International Association of Electrical InspectorsAlternate: Richard Hollander
E 07/29/2013NEC-P18
Charles S. Kurten
PrincipalUL LLC1285 Walt Whitman RoadMelville, NY 11747-3085Alternate: Juan M. Caamaño
RT 7/29/2005
NEC-P18
William Ross McCorcle
PrincipalAmerican Electric Power5524 East 15th StreetTulsa, OK 74112-6324Electric Light & Power Group/EEI
UT 10/28/2014NEC-P18
Michael S. O'Boyle
PrincipalPhilips Lightolier631 Airport RoadFall River, MA 02720-4722American Lighting AssociationAlternate: Donald Berlin
M 1/1/1994
NEC-P18
Wesley J. Wilkens
PrincipalPersona, Inc.44574 US Highway 212Watertown, SD 57201-7618International Sign AssociationAlternate: Gabriel A. Griffin
M 04/08/2015NEC-P18
Randall K. Wright
PrincipalRKW Consulting698 Walnut StreetMontoursville, PA 17754
SE 1/1/1988
1Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 7 of 10
Address List No PhoneCode-Making Panel 18 NEC-P18
National Electrical Code®
Mark W. Earley12/19/2017
NEC-P18
Donald Berlin
AlternateIntermatic Inc.7777 Winn RoadSpring Grove, IL 60081American Lighting AssociationPrincipal: Michael S. O'Boyle
M 03/05/2012NEC-P18
Juan M. Caamaño
AlternateUL LLC1285 Walt Whitman RoadMelville, NY 11747Principal: Charles S. Kurten
RT 08/17/2017
NEC-P18
Steve Campolo
AlternateLeviton Manufacturing Company, Inc.201 North Service RoadMelville, NY 11747-3138National Electrical Manufacturers AssociationPrincipal: Frederick L. Carpenter
M 1/14/2005NEC-P18
Mark Coshal
AlternateIES Commercial of San Antonio336 Distant ViewLakehills, TX 78063Independent Electrical Contractors, Inc.Principal: Ron D. Alley
IM 04/04/2017
NEC-P18
Gabriel A. Griffin
AlternateClear Sign and Design Inc.170 Navajo StreetSan Marcos, CA 92078-2506International Sign AssociationPrincipal: Wesley J. Wilkens
M 04/05/2016NEC-P18
Richard Hollander
AlternateCity of TucsonPlanning & Development Department201 North StoneTucson, AZ 85701-1207International Association of Electrical InspectorsPrincipal: Jack E. Jamison, Jr.
E 3/1/2011
NEC-P18
William F. Laidler
AlternateIBEW Local 223 JATC168 Dillingham WayHanover, MA 02339International Brotherhood of Electrical WorkersPrincipal: Paul Costello
L 08/17/2017NEC-P18
Paul Yesbeck
AlternateACU Sign Corporation2276 Quail Roost DrWeston, FL 33327National Electrical Contractors AssociationPrincipal: Bobby J. Gray
IM 03/03/2014
NEC-P18
Mark W. Earley
Staff LiaisonNational Fire Protection Association1 Batterymarch ParkQuincy, MA 02169-7471
2Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 8 of 10
Attachment C: A2019 Revision Cycle Schedule
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC
Page 9 of 10
12/22/2017 NFPA
Annual 2019 NEC Revision Cycle
Process Stage Process StepDates for TC
with CC
Public InputStage (First Draft)
Public Input Closing Date* 9/07/2017
Final Date for TC First Draft Meeting 1/20/2018
Posting of First Draft and TC Ballot 3/09/2018
Final date for Receipt of TC First Draft ballot 3/23/2018
Final date for Receipt of TC First Draft ballot ‐ recirc 3/30/2018
Posting of First Draft for CC Meeting 4/06/2018
Final date for CC First Draft Meeting 5/11/2018
Posting of First Draft and CC Ballot 6/15/2018
Final date for Receipt of CC First Draft ballot 6/22/2018
Final date for Receipt of CC First Draft ballot ‐ recirc 6/29/2018
Post First Draft Report for Public Comment 7/06/2018
Comment Stage(Second Draft)
Public Comment Closing Date* 8/30/2018
Notice Published on Consent Standards (Standards that received no Comments) Note: Date varies and determined via TC ballot.
Appeal Closing Date for Consent Standards (Standards that received no Comments)
Final date for TC Second Draft Meeting 11/03/2018
Posting of Second Draft and TC Ballot 12/21/2018
Final date for Receipt of TC Second Draft ballot 1/11/2019
Final date for receipt of TC Second Draft ballot ‐ recirc 1/18/2019
Posting of Second Draft for CC Meeting 2/01/2019
Final date for CC Second Draft Meeting 2/22/2019
Posting of Second Draft for CC Ballot 3/15/2019
Final date for Receipt of CC Second Draft ballot 3/22/2019
Final date for Receipt of CC Second Draft ballot ‐ recirc 3/29/2019
Post Second Draft Report for NITMAM Review 4/05/2019
Tech SessionPreparation (&
Issuance)
Notice of Intent to Make a Motion (NITMAM) Closing Date 4/26/2019
Posting of Certified Amending Motions (CAMs) and Consent Standards 5/17/2019
Appeal Closing Date for Consent Standards
SC Issuance Date for Consent Standards
Tech Session Association Meeting for Standards with CAMs 6/20/2019
Appeals andIssuance
Appeal Closing Date for Standards with CAMs 7/10/2019
SC Issuance Date for Standards with CAMs 8/07/2019
TC = Technical Committee or Panel CC = Correlating Committee
As of 1/27/2017
More NFPA.org
Code-Making Panel 18 First Draft Meeting Agenda Hilton Head, SC Page 10 of 10