NATCO Catalogue

Cathodic Protection Rod Anodes

4 150 Anode Flange

Anode Wire

Insulation Kit

Wooden Rollers

Slab Anode

Bagged Anode

Johnson Fagg Anode Head Assembly

GasketsGaskets

Custom Gasket Sheet #1



Burner ComponentsBurner Assembly

Mixer parts & Accessories

Burner Parts & Accessories

Mixers/Nozzles

Natco 2 Adjustable Gas Mixer

Pilot Nozzles & Pilot Assembly

Peepsight

Stacks for Vessels

Fire Tubes & Accessories

Turbulators

ArcStart Portable Igniter

Burner Management Systems

Specialty ItemFuel Gas Scrubbers & Accessories

Thief Hatch 8-10

Thief Hatch 8-8A

Thief Hatch Springs

Tank Flange Accessories & Tank Bolts

Float Balls

Cone Relief Valve

Night Hawk Dump Timer

Trerice Thermostat

Excelsior Bale

Finned Tube Piping

Coalescing and Filter MediaRandom Packing-Ballast, Ceramic Saddles, Nutter

Performax Coalescer

Vane Pak

Mistex Pad

FiltrationFilter Elements

ACF-750-2 Element/Filter

ACF-1002-1 Element/Filter

DesiccantDesi-Dri Type HPA

Desi-Dri Type C

Desi-Dri Type D

Desi-Dri Type E

Answers to common questions

ServiceField Maintenance Services

Grid ComponentsTransformer and Accessories

Natco Process Equipment & SolutionsVarious Equipment & Type of Vessels

TABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTSTABLE OF CONTENTS

Dear Valued Customer:

Natco Canada Ltd. today continues to be the worldwide leader in design, manufacturing and service of process equipment and integrated systems for the oil and gas production industry. The company has built its reputation on providing and distributing high performance and high quality products and services for the oil eld and industrial industry.

Natco is committed to current and existing customer relationships by meeting all requirements and exceeding expectations by providing reliable, quality products and services. One step towards doing this is providing our customers with a General Parts Catalogue to solve your application requirements and offer new alternatives to meet your needs.

Natco Canada Ltd. General Parts Catalogue is designed to help you nd a variety of products and technologies we offer. You will nd that the product and information in this catalogue will give you the ability to understand the application for each item and provide you with contact information for all technical inquiries.

The General Parts Catalogue is broken up into three main sections containing product information for the following product lines:

Natco General Products Cathodic Protection, Gaskets, Coalescing and Filter Media, Grid Components, Filtration, Burner Components, Desiccant, Specialty Items, Service and Process Equipment Products

Invalco Liquid Turbine Meters, Gas Turbine Meters, Totalizers, Flow Computers, Analytical Instruments, Oil/Water Monitors, Low Pressure Oil/Water/Gas Filters, Valves, Micro-valves, Pneumatic Level Controls, Electronic Level Controls, Pressure Switches, Temperature Controllers and Miscellaneous items

Nutech Indicating Devices, Interface Relays, Quick Exhaust Relays, ESD Devices Manual Reset Relays, Automatic Reset Relays, Pressure Sensing Devices

Our trained staff are focused on giving you the best assistance and service in any way possible. If you have any questions or comments please dont hesitate

to call us at one of our locations:

Leduc, AB Edson, AB Bonnyville, AB 780-986-9803 780-712-4242 780-573-1777

Grande Prairie, AB Fort St. John, BC 780-539-0389 250-787-0161 Toll Free: 1-800-661-6628

CHAPTER 1Cathodic

Protection

Anodes & AccessoriesCathodic Protection

Cathodic protection requires periodic replacement of consumed anodes in treaters and other production vessels. The use of anodes and accessories make this process simple.

Rod Anode

Rod anodes are cast with threaded steel rod cores and come in aluminum, zinc and magnesium.

The 4 150 anode ange has a 22 long threaded rod with an eight hole ange that bolts on to the side of the vessel. The 3 X 22 anode threads on to the end of the rod and is inserted into the vessel.

Anode wire also know as a Pig Tail, is 78 long and attaches to the 4 150 ange. Anode wire is used to ground the ange and vessel.

The anode insulation kit is attached to the 4 150 ange as an added seal between the ange and the vessel. The gasket in the kit is made from a Neo faced Phenolic INS material.

Anode rollers are positioned under the anode for support so the anode does not touch the vessel wall.

DESCRIPTION

Part No. Description Size Material Weight

61046010 Rod Anode 3 X 22 Aluminum 17 Lbs

61046020 Rod Anode 3 X 22 Zinc 38 Lbs

61046025 Rod Anode 3 X 22 Magnesium 13 Lbs

ACCESSORIES

Part No. Description Size

42221004 Rod Anode Flange 4 150


61040070 Anode Wire 78

Part No. Description

48720566 Anode Wooden Roller


61370405 Anode Insulation Kit

4 150 Anode Flange

Anode Wire

Insulation Kit

Wooden Roller

Rod Anode

Slab Anode

Slab anodes are square shaped with a hole in the center where it attaches to a stud on the inside oor of the vessel. Natco slab anodes come in aluminum and magnesium.

Bagged & Packaged Anodes

The 5 Lb. zinc bagged anodes are packed in a rugged water permeable cardboard tube that has a minimum wall thickness of 2.3 mm. 17 Lb. are packaged in a cotton like material bag. Both these types of anodes are recommended for use in soils as grounding cells on electrical equipment and across insulators on pipelines to limit high voltages. Typical grounding applications include pipelines, power stations, storage tanks, and transmission line towers and cables. Bagged anodes come in zinc and magnesium material.

Slab Anode

Bagged Anode

Part No. Description Size Material

61046015 Slab Anode 8 X 8 X 2 Aluminum

61040206 Slab Anode 8 X 8 X 4 Magnesium

Part No. Description Material WeightShipping Weight

61046030 Packaged Anode Zinc 5 Lb. 12.5 Lbs

61046026 Bagged Anode Magnesium 17 Lb. 40 Lbs

DESCRIPTION

DESCRIPTION

Anodes & AccessoriesCathodic Protection

Johnson Fagg Anode Head

Anode insulating heads help prevent the accumulation of adherent scale on the re tube and provides cathodic protection for the inside of the treater.

Johnson Fagg Anode Head ACCESSORIES


61046060 Johnson Fagg Anode Head -

61040060 Washer 5/8

61040050 Nut 5/8- 18

61040040 Gasket 3-1/2

61040035 Gasket 5/8

61040025 Rod Steel Core -

61040020 Spacer Tube or Pipe -

61040015 Back Section 3-3/4 OD

61040010 Head Section 4-4/2 OD

47151004 Victaulic Gasket 4

30243013 Victaulic Coupling 4

*Quantity of 2 Gaskets Required Part# 61040040 & Part# 61040035

DESCRIPTION

CHAPTER 2Gaskets

Types, Materials and ApplicationsGaskets

Here at Natco, we develop, manufacture and supply a variety of gaskets in many materials for numerous types of vessels and equipment. Natco gaskets are a high quality, cost effective solution in the event replacements gaskets for vessels and other various types of equipment are required.

For any Natco built vessels if provided with vessel information such as a CRN, drawing, shop order or serial number we will be able to pull up the data for that specic vessel and supply the gaskets that are required for that unit.

Natco also offers custom cut gaskets, given the precise measurements and desired material; a custom cut gasket can be constructed. The following pages are diagrams of gaskets and the required measurements needed to effectively construct a custom cut gasket. *NO RETURNS ON CUSTOM CUT GASKETS

Natco carries a broad range of gaskets and materials to accommodate high temperatures, sweet or sour service and other elements and environments. Some examples are:

Gasket TypeManway Gaskets

Fire Tube Gaskets

Burner Gaskets

Stack Gaskets

Spiral Wound Gaskets

Gasket Stripping

Chime lap gaskets

Fillet Door Gasket

*Additional varieties upon request.

MaterialNeoprene

Teon

Non-Asbestos

Buna

304 & 316 SS

Viton

Durlon

*Additional materials upon request

ApplicationsTreaters

FWKO

Flanges

Heaters

Scrubbers

Separators

Reboiler

Thief Hatches

*Other additional applications

Gaskets

DESCRIPTION

LEGEND

A= GASKET / FLANGE INSIDE DIAMETER. A=_______________________

B= GASKET / FLANGE BOLT CIRCLE DIAMETER. B=________________________

C= GASKET / FLANGE OUTSIDE DIAMETER. C=________________________

D= BOLT HOLE CENTER TO CENTER DISTANCE. D=_______________________

E= BOLT HOLE DIAMETER AND QUANTITY. E=________________________

LEGEND


B= GASKET / FLANGE BOLT CIRCLE DIAMETER. B=________________________

C= GASKET / FLANGE OUTSIDE DIAMETER. C=________________________

D= GASKET / FLANGE OVER-ALL HEIGHT. D=_______________________

E= BOLT HOLE SPACING (ON STRAIGHT SECTION). E=_______________________

F= BOLT HOLE SPACING (ON CURVED SECTION). F=_______________________

G= BOLT HOLE DIAMETER AND QUANTITY. G=_______________________

LEGEND


B= GASKET / FLANGE BOLT CIRCLE DIAMETER. B=_______________________

C= GASKET / FLANGE OUTSIDE DIAMETER. C=_______________________

D= GASKET / FLANGE OVER-ALL HEIGHT. D=_______________________ E= GASKET/ FLANGE CENTER TO CENTER DISTANCE. E=_______________________

F= GASKET/ FLANGE OUTSIDE RADIUS. F=_______________________

G= BOLT HOLE SPACING (ON STRAIGHT SECTION). G=_______________________

H= BOLT HOLE SPACING (ON CURVED SECTION). H=_______________________

I= BOLT HOLE DIAMETER AND QUANTITY. I =_______________________

CHAPTER 3Burner Components

Natco Flame Arrestor Housing & Flame Cells

Natco ame arrestors are used to prevent the transmission of ame within the combustion chamber when exposed to an external fuel source. The purpose of a ame arrestor is to reduce the temperature of a ame below the ignition temperature of the fuel to withstand the internal forces of an explosion.

Natco ame arrestor housings and ame cells are available and recommended for all red units. Fire tube size, length, BTU rating, type of gas and application specs are required prior to ordering all ame arrestor housings or ame cells.

Flame arrestor housings are constructed from standard aluminum but can be made of carbon or stainless steel material depending on the type of application it will be placed in.

Flame cells can be made from aluminum or stainless steel material and come in four different styles: O-Type 1-2 PiecesT-TypeBox-TypeCone-Type

Burner Assembly Burner Components

Flame Arrestor Housing & Flame Cells

DESCRIPTION

Mixer Parts & AccessoriesBurner Components

ORDERING INFORMATION

1 Mixer Body Shutter Cap Orice Br. Adj. Pin Lock Nut L.N.Conduct Pac. Ring Pac.Gland

Natco 51522114 51522106 51522115 51522113 51522102 51522104 51522108 51522109

Model No. 548-1 189 213 12162 19568 11600 12138 12174 19568

1.25 Mixer Body Shutter Cap Orice Br. Adj. Pin Lock Nut L.N.Conduct Pac. Ring Pac.Gland

Natco 51522004 51522106 51522115 51522113 51522102 51522104 51522108 51522109

Model No. 293-1 294 213 12162 19569 11600 12138 12174 19568


Natco 5152204 51522106 51522115 51522113 51522102 51522104 51522108 51522109

Model No. 295-1 294 213 12162 19569 11600 12138 12174 19568


Natco 51522124 51522106 51522125 51522123 51522102 51522104 51522108 51522109

Model No. 258-1 1842 213 12165 19570 11600 12138 12174 19568


Natco 51522134 51522106 51522125 51522123 51522102 51522104 51522108 51522109

Model No. 259-1 280 213 12165 19570 11600 12138 12174 19568


Natco 51522144 51522107 51522135 51522143

Model No. 306 304 1742-2 12166 12203 11587 12136 N/A N/A


Natco 51522154 51522107 51522135 51522153

Model No. 1794 1812 1742-2 12166 17105 11587 12136 N/A N/A


Natco 51522164 51522107 51522135 51522163

Model No. 1754 1795 1742-2 12166 12204 11587 12136 N/A N/A

*Orce and Adjusting Pins available in stainless steel upon request.

Burner Parts & AccessoriesBurner Components


3/4 Size 3/4 mixer 3/4 barrel 3/4 sleeve 3/4 ferro x 3/4 sticktite 3/4 bell

Natco B79 3/4X3/4 51133255 N/A N/A N/A N/A N/A

Model No. 300116

1 Size 1 mixer 1 barrel 1X1 sleeve 1 ferro x 1 sticktite 1 bell

Natco B80 3/4X1 51133259 51533566 51531251 51033124 51033125 51033108

Model No. H-40 300118 566 251 4F-1 ST-204-18

1.25 Size 1 mixer 1 barrel 1X1.25 sleeve 1.25 ferro x 1.25 sticktite 1.25 bell

Natco B80 3/4X1 51133259 51533566 51531353 51033128 51033129 51033109

Model No. H-50 300118 566 1353 5F-1 ST-205-28

1.5 Size 1.25 mixer 1.25 barrel 1.25 X 1.5 sleeve 1.5 ferro x 1.5 sticktite 1.5 bell

Natco B81 3/4X11/4 51133263 51533567 51531318 51033131 51033130 51033110

Model No. H-60 300120 567 1318 6F-1 ST-206-36

2 Size 1.5 mixer 1.5 barrel 1.5X2 sleeve 2 ferro x 2 sticktite 2 bell

Natco B84 3/4X11/2 51133270 51533568 51531317 51033132 51033133 51033111

Model No. H-80 300122 568 1317 8F-1 ST-208-42

2.5 Size 2 mixer 2 barrel 2X2.5 sleeve 2.5 ferro x 2.5 sticktite 2.5 bell

Natco B82 1X2 51133267 51533569 51531315 51033142 51033141 51033112

Model No. H-100 300124 569 1315 10F-1 ST-210-56

3 Size 2.5 mixer 2.5 barrel 2.5X3 sleeve 3 ferro x 3 sticktite 3 bell

Natco B95 1X11/2 51133276 51533570 51531316 51033139 51033140 51033113

Model No. H-120 300126 570 1316 12F-1 ST-212-68


Natco B87 11/4X3 51133278 51533571 51531380 51033143 51033145 51033114

Model No. H-160 300127 571 1380 16F-1 ST-216-84


Natco B88 11/4X4 51133280 51533572 51531495 51033149 N/A

Model No. H-200 300128 572 1495 20F-1 not available


Natco B89 11/4X5 51133284 51533573 51531925 51033151 51033153

Model No. H-200 300129 573 1925 24F-1 ST-224-128

Mixer(c/w ori ce)

Compound Barrel Sleeve

Ferro xMale NPT

SticktiteFemale NPT

BellFemale NPT

Mixers & NozzlesBurner Components

MIXERS

Part No.Body Orice

Model No. Gas Inlet Size

Type Orice Size

Burner Conn. Size

45008576 45002892 B90 1/4 Model 100 No. 10 1/2 Female

45008577 - B91 1/4 Model 100 1/16 3/4 Male

45002894 45002895 B92 1/2 Model 200 3/32 1 Male

- 45002897 B93 3/4 Model 400 1/8 1 1/4 Male

- 45002899 B94 3/4 Model 600 5/32 2 Male

Part No. Inlet Connection Size Manufacturer Model No.

51033121 3/4 Female Eclipse B60

51033125 1 Female Eclipse B61

51033129 1 1/4 Female Eclipse B62


51033135 2 Female John Zink B65

51033139 3 Male Eclipse B68







Mixers


Part No. Inlet Connection Size Model No.

80000401 3/4 Female B100

80000405 1 Female B101

80000406 1 1/4 Female B102

80000410 5 O.D. * 2 Female B72

Natco Gas Burner Nozzles


Eclipse/John Zinc Burner Gas Nozzles

Natco 2 Adjustable Gas Mixer Burner Components

Item No. Part No. Inlet Connection Size

- 80000403 Complete Mixer

1 45000971 Body

2 45000972 Body Inlet Cap

3 48012656 Adjusting Stem with Handle

4 45000962 1/8 Graphite String Packing

5 45000974 Stufng Box Nut

6 45002805 Cap Gasket


Pilot Nozzles & Pilot AssemblyBurner Components

B5048005790

1/2 FemaleNPT

B3648729563

1/2 FemaleNPT

B4245006743

1/4 FemaleNPT

B5148729558

1/2 FemaleNPT

1. 1/4 NPT, Model #72 Brass Orice 45002892 *Optional #70 Aluminum Orice with Mixer 450085782. 1 Model 100 Mixer (Venturi) 1/2 Fem. Conn. 450085763. 750 True Pilot Mixer (Alum Body c/w Air Shutter #70SS 51030750

orice inlet 1/8 NPT, outlet 3/4 or 1/2 NPT connection)4. 1/2 SID Pipe Nipple (Not stock, usually cut to length on eld)5. Pilot Nozzle *Options listed above

*Pilot position is normally 1/4 from end of primary burner nozzle. Extend this nipple as necessary to keep the venturi close to air supply.

Pilot Assembly with Model 100 Mixer

Pilot Assembly with 750 True Pilot Mixer

1 2 4 5

4 53

Peepsight

PeepsightBurner Components

Peepsight

Natco carries a variety of peepsight assemblies from 1 to 3 NPT connections that are available for various combustion needs. There is a 2 NPT high pressure peepsight that is designed for up to 3000 PSI. The single piece units are all designed for installation on the burner appliance itself so the burner ame can be seen and monitored.

DESCRIPTION

Part No. Description Site Glass Dimensions In Inches

61551001 Peepsight Regular 1 NPT

61551004 Peepsight Flame Arrestor Aluminum 1 NPT

61551002 Peepsight Regular 2NPT

61551005 Peepsight High Pressure 2 NPT

61551003 Peepsight Regular 3 NPT


* For replacement stacks other than those listed above please provide the O.D length, bolting pattern (if anged) the serial number and type of vessel.

DESCRIPTION

Stacks for VesselsBurner Components

Stacks

Natco offers various sizes and lengths of stacks. If you would like to order a stack please call one of the branch locations. The information required prior to ordering is the serial and CRN number, outside diameter, length of the stack and vessel type.

Stack

Fire Tube Return Bend

Fire Tube Return Bends

Natco has developed a high quality and longlasting return bend. The return bend has been hot steel pressed and localized for thermal stress cracking for extended life.

Horizontal TreatersVertical TreatersHorizontal FWKODirect Fired HeatersIndirect Fired HeatersSalt Balt HeatersGlycol ReboilersFire Tube Repairs

Diameter (inches) 18 24 30 Min. Thickness (inches) 0.328 0.346 0.440 External D.W.P 225 145 175 Return Bend Material SA-516-70N Insert Material SA-106-GR B

Fire Tube Return Bends

Natco has different sizes and lengths of re tubes such as 18, 24 and 30. Each re tube varies in length, so if you are in need of a re tube please call one of our Natco branches.

DESCRIPTION

APPLICATIONS

SPECIFICATIONS

Fire Tubes & AccessoriesBurner Components

DESCRIPTION


Part No. Description Size Holes

48484092 Fire Tube Production Blind Flange 18 X 1.625 52

48484094 Fire Tube Production Blind Flange 24 X 2 64

48484096 Fire Tube Production Blind Flange 30 X 2.25 62

Production Blind Flanges

Turbulators & Fire Tube Liners

Turbulators

Natco turbulators come in various sizes and lengths, ranging from 18 and up. We require that you have the serial and CRN number along with length and diameter of the re tube prior to ordering.

Fire Tube Liners

Natco re tube liners come in 304, 316 and 430 stainless steel material to enhance re tube protection. Either material will enhance and lengthen service life of the re tube. Natco in the past has recommended Incoloy 800 or Incoloy 800HT as the premium liner material to be used in the most severe services. These materials are available in different widths and have proven to provide satisfactory re tube expectancies in high temperature fuel gas service. The serial and CRN number, the length and outside dimensions of the re tube must be provided prior to ordering.

DESCRIPTION

TurbulatorsBurner Components

DESCRIPTION

Arcstart Portable Igniter

Arcstart Portable Igniter

In this day of safety rst, this revolutionary handheld electric arcing ignition system is a must for todays oileld operator. The Arcstart Portable Igniter is an extremely reliable unit that will ignite burners in the cold, wind and rain. This lightweight, easy to use, battery operated unit will be a favorite operators tool the rst day it is used. No more dangerous open ame on an oileld lease or ghting with the wind and the rain to get a burner lit. It also has a trigger lock for safety when transporting unit.

*Additional sizes and replacement wands available on special request only. Not stock items.

DESCRIPTION

Arcstart Portable IgniterBurner Components


Part No. Wand Length Total Length

42220500 4 Foot 5 Foot

Wand Length Total Length

5 Foot 6 Foot

6 Foot 7 Foot

Burner Management Systems

Natco has the ability to install and service new and existing Burner Management Systems. Burner Management Systems are designed to meet the requirements of regulatory authorities and industry standards. Natco offers systems that can monitor atmospheric burner appliances from 100,000 BTU/hr to 10,000,000 BTU/hr. The burners systems conform to the B149.3 Code and are a CSA approved electrical burner system that can be used in the applications of various vessels.

Complete line of Ignition SystemsCSA approvedUp to B149.3 Code standardsEfcient and effective productOver 50 years in the Oil & Gas IndustryIn house engineeringFull burner service, troubleshooting and ue gas analysis Flame Arrestor Testing ServicePreventative Maintenance ProgramsTrained Technicians on Call 24/7

TreatersFree Water KnockoutsLine HeatersDehydratorsGlycol and Amine ReboilersSalt Bath HeatersTanks

DESCRIPTION

Burner Management SystemsBurner Components

FEATURES

APPLICATIONS

CHAPTER 4Specialty Item

Fuel Gas Scrubber

ADDITIONAL PARTS FOR FIG.4

ASME SECTION VIII, DIVISION 1 CONSTRUCTION

Fuel Gas Scrubbers & AccessoriesSpecialty Items

Fuel Gas Scrubbers & Accessories

A safety Fuel Gas Scrubber with a high level shut down, automatically shuts off a fuel gas supply to a treater, heater, or other equipment where it is undesirable to let liquid pass into a ring system with the fuel gas.

DESCRIPTION

Part No. Fig No. Total Length

80003097 4 CF-401Level Control

64334331 4 8 Float Ball 1/2 NPT.Conn.

Part No. Total Length

80000020 2 X 1 MODEL 80 Safety Shutdown Valve

80000022 2 X 1 Fuel Gas Safety Shutdown Valve c/w S.S Float

80000025 2 X 1 Fuel Gas Safety Shutdown Valve c/w 11 PVC Float

Part No. Fig. No.

Size (inches)

Working Pressure (PSI)

MDMT(F)

Equipped With Approx. Ship. Weight (Lbs.)

48162506 1 6 X 29 150 -20 100

48162508 2 8 X 29 150 -20 150 Scrubber w/o Float 100

48162510 3 10 X 29 150 -20 Float Controlled Shut Off 110

48162511 4 10 X 29 150 -20 CF-401 Continuous Drainer and Float Controlled Shut-Off Valve

110

48162513 N/A 10 X 29 260 -20 Head both ends, Non-self drain 110

HIGH LEVEL SHUTDOWN

Natco Thief Hatch 8-10


Thief Hatch 8-10Specialty Items

Part Number Stock Number Description

61802008 8-10 hatch, Sweet Standard 16oz Pressure & 4oz Vacuum

61802009 8-10 hatch, Sour, Standard 16oz Pressure & 4oz Vacuum

1 61802881 Base, cast aluminum

2 61802882 Drain pan

3 61802883 Lid, cast aluminum

4 61802900 Pressure valve casting

5 61802908 Vacuum disk, aluminum

6 61802909 Back-up plate, aluminum

7 47992006 Pressure gasket, neoprene

7 57992006 Pressure gasket, viton

8 47992005 Vacuum gasket, neoprene

8 57992005 Vacuum gasket, viton

47702247 Base gasket, G6, Teon

47702248 Base gasket, G6, neoprene

47702249 Base gasket, G6, viton

9 61802903 Screws, cad. Pl (2 required)

11 61802911 Valve guide stem

12 61802912 Pressure spring, 2 oz. To 16 oz. Sweat or sour

13 61802914 Vacuum spring, sweat or sour

15 61802915 Hinge pin

16 61802916 Hair pin, cotter. (2 required)

17 61802917 Hook, tenzaloy

18 61802918 Handle, tenzaloy

19 61802919 Roll pin

20 61802920 Latch hinge pin, long

21 61802922 Pressure and vacuum valve unit less spring

(parts 4, 5 6, 8, 9, 11 &13)

22 61802923 Latch unit parts (17, 18 &19)

Part Number Stock Number Description

1 61802801 Base, cast aluminum

2 61802803 Lid, cast aluminum

3 61802804 Pressure valve casting

4 61802908 Vacuum disk, aluminum

5 61802909 Back-up plate, aluminum

6 47992004 Pressure gasket, neoprene

6 61802929 Pressure gasket alternate, neoprene sponge roll

6 57992009 Pressure gasket, viton sponge strip roll

47701005 C-40 adhesive

7 47992005 Vacuum gasket, neoprene

7 57992005 Vacuum gasket, viton

47702247 Base gasket, G6, Teon

47702248 Base gasket, G6, neoprene

47702249 Base gasket, G6, viton

8 61802903 Screws, cad. Pl (2 required)

9 61802911 Valve guide stem

10 61802912 Pressure spring, 2 oz. To 16 oz. Sweat or sour

11 61802914 Vacuum spring, sweat or sour

12 61802812 Hinge pin

13 61802916 Hair pin, cotter. (2 required)

14 61802814 Latch, aluminum

15 61802920 Latch hinge pin

16 61802922 Pressure and vacuum valve unit less spring

(parts 4, 5, 8, 9 & 11)

Natco Thief Hatch 8-8A


Thief Hatch 8-8ASpecialty Items

Natco carries a number of different thief hatch springs that range from 2 OZ to 16 OZ both for sweet and sour applications. The pressure and vacuum springs are only for the 8-10 & 8-8A thief hatch models.

DESCRIPTION

Thief Hatch SpringsSpecialty Items

Springs for the Natco and 8-8A Thief Hatch

Pressure SpringsORDERING INFORMATION

Part No. Description Pressure Service

61803002 Thief Hatch Pressure Spring 2 OZ Sweet


61803005 Thief Hatch Pressure Spring 4 OZ Sour







Vacuum SpringsORDERING INFORMATION

Part No. Description Pressure Service

61802914 Thief Hatch Vacuum Spring 0.4 OZ Sweet/Sour

Natco Thief Hatches have changed model numbers throughout the years and some of the still commonly used new and old model numbers are:

Old Model No. New Model No.

S-8A 8-8A S-10 8-10 S-22 8-22 AP 8-PO AR 8-PV R4 4-PV

* On the above information please call for more detailed information.

Tank Flange Gaskets


Tank Flange

Natco cast iron tank ange unions are designed for use on bolted tanks for piping connections. The tank anges come in various sizes and are constructed of cast iron and dipped in galvanized metal. The galvanized metal protects the ange from corrosion and rust. Tank anges come complete with bolts, nuts and two neoprene gaskets.

DESCRIPTION

Tank Flange Accessories & Tanks Bolts

Specialty Items

Part No. Description Size # Holes Weight

31991100 Tank Flange 1 3 3 Lbs

31991200 Tank Flange 2 4 7.5 Lbs





Tank Flange


47552010 Tank Flange Neoprene Gasket 1






*Quantity of 2 needed per tank ange

Bolt & Nut Sets

Tank Bolts


65281211 Tank Flange Bolt & Nut Set 2






65281205 Tank Bolt c/w SQH HD Nut 1/2 X 1

65281206 Tank Bolt c/w SQH HD Nut 1/2 X1.25

65281207 Tank Bolt c/w SQH HD Nut 1/2 X 1.5

Float BallsSpecialty Items


Natco Canada can meet your oatation needs with the best oats in the industry. Our oats are engineered to the most exacting standards and built with the know-how of skilled craftsmen with years of experience. They come in a variety of sizes, connections and materials.

DESCRIPTION

Stock No. Ball Diameter

Pipe Stud Conn. Size

Max. W.P.P.S.I Collapse Pressure

Weight Lbs. Material

45013476 7 X 12 3/4 NPT 500 750 5.5 SS

45011711 2 X 10 1/4-20 NC 200 350 0.70 SS

45005655 3 1/2 X 6 1/4 -20 NC 400 700 0.75 SS

64311211 3 1/2 X 20.5 3/8 NC 125 175 3 SS

64311213 3 1/2 X 20.5 3/8 NC 125 175 3 SS

64334328 5 1/2 NPT 490 700 1 Nic Plate

64334331 8 1/2 NPT 350 585 3 SS

64334335 10 1/2 NPT 350 820 7 Nic Plate

64334336 10 1/2 NPT 150 275 4.5 SS

64334337 9 X 14 Ellip. 1/2 NPT 200 350 11 Nic Plate

64334400 8 1/2 NPT 350 585 3 Teon

NOTE: NATCO Float Balls for Liquid Level Controls are extremely durable Made of Shovel Steel and heavily Nickel-plated.*T.B.D. To be Determined These oats are counter-weighted for interface controls and exact weight has to be calculated from gravity factors of interface components.

Flow takes place in the direction of the arrows under forward or reverse ows.

\

A= Valve Open C= DiaphragmB=Valve Closed D= Cone

With ow in the forward direction, once design pressure is reached the diaphragm deects inwards (A) allowing easy passage of the gas or liquid. When there is no ow or low pressure conditions the diaphragm returns to its relaxed condition (B) sealingoff all ow.

Tight shutoff under minimum pressureQuick responseLow resistanceLightweight constructionEasy installationLimited maintenance.Simple designOperates in any direction, vertical, up, down or horizontalHigh material specicationSimple incorporation into original equipment

DESCRIPTION

FEATURES

Cone Relief Valve

Cone Relief ValveSpecialty Items

SPECIFICATIONS

Operating Temperature 355F/180C Maximum Peak Temperature 395F/200CPressure Ranges Available 1-2# 3-5# 6-7#


Part No. Description Model No.

Pressure Range

42220102 Cone Check c/w rubber insert

Q-70-B 3-5 Lbs

42220111 Cone Check Insert

F-17-A 1-2 Lbs

42220112 Cone Check Insert

F-17-B 3-5 Lbs

NighthawkSpecialty Items

Nighthawk Pneumatic Dump Timer 9505-2105

The Nighthawk 9505-2105 is a Micro-Processor based industrial controller designed to provide programmable operation of a pneumatic valve operated system in remote, out-door environments. The product operates one pneumatic motor valve in accordance with user programmed control sequences. The control sequences can be initiated by an external wellhead pressure switch closure or timeout user specied Open/Close time duration. Low power operations permits continuous, unattached operations using a lantern style battery for a power source. A solar panel can also be provided as an option.

Manual On & OffDelay TimeBack up TimePlunger Arrival Switch InputHigh & Low Pressure Switch inputOpen Time CounterClose Time CounterPlunger Run CounterLast 10 Plunger Runs time in Min & seconds

DESCRIPTION

FEATURES

SPECIFICATIONS

Enclosure Water sealed NEMA 4 rating. Molded of Fiberglass Reinforced polyester. Stainless Steel hinged cover and twist latchOverall Size 6 X 4 X 4: HxWxD Shipping Weight pounds includes Battery


Cone Relief Valve

Part No. Description Model No.

42222100 Pneumatic Dump Timer

9505-2105

42222101 Timer Battery PC-915

42222210 Replacement Solar Panel

N/A

42222220 Rechargeable Battery

3904-P682

SPECIFICATIONS

Enclosure Water sealed NEMA 4 rating. Molded of Fiberglass Reinforced polyester. Stainless Steel hinged cover and twist latchOverall Size 6 X 4 X 4: HxWxD Shipping Weight pounds includes BatteryTemperature Range -50 to + 150 degrees FBattery 1 Lantern Style Battery Sensor Three (3) Inputs One (1) Delay two(2) Pressure Hi/LowMotor Valve Control One (1) Front Pane Controls Manual Open/Close, Time Set, HistoryInstruction On Inside of front door cover 2X16 alpha numeric LCD 2-Key Select Function (Time) 1-Key Override (Manual)Solar (Available)

The Nighthawk (9505-2105)

Display Status Specications Close Time & Back-up Time HR: MIN: SEC: To next valve cycle (From Close to Open) Open Time & Delay HR: MIN: SEC: To next valve cycle (From Open to close) Valve Status Indicates Valve condition (Open or Close) Battery Status Indicates Battery Condition (Low/OK) & Replace Program Parameters Back-up Time 00:00:01 to 99:59:59 HRS Close Time 00:00:01 to 99:59:59 HRS Open Time 00:00:01 to 99:59:59 HRS Special 1 Short or Long Cycle Close Cycle Time 00:00:01 to 99:59:59 HRS Open Cycle Time 00:00:01 to 99:59:59 HRS Options: Plunger & Valves Open Counter From 0 to 999 & close counter +6 Volts Charge Solar

Trerice Thermostat 91000XT Specialty Items

The 91000XT Tank Thermostat is especially designed to control the temperature of heaters, treaters and separators within the petroleum industry. It is entirely self-contained, requires no external power source and is the most widely preferred unit of its kind. When installed in a treater, the normally open valve will automatically close off the ow of gas as temperature increases, thereby regulating temperature within the treater. The Trerice 91000XT is ruggedly constructed with a heavy duty, die cast aluminum actuator housing. Its single seated, cast-iron valve body is tted with a stainless steel plug assembly and soft seating Viton o-ring to provide tight shut off.

DESCRIPTION

Thermostat 91000XT

Part No. Description Connection Temp Range Length

61822005 Thermostat 91000X 3/4 NPT 80-140F 10

61822040 Thermostat 91000X 3/4 NPT 125-215 F 10

61843009 Thermowell 1.25 NF X 1 NPT X 9 CS

Warning*This valve may only be installed in outdoor applications. The Teon v-ring packing will allow fugitive emissions to escape. Improper application may cause failure of the valve, resulting in possible personal injury or property damage.

SPECIFICATIONS

Model No. 91000XT Power Requirements Fully self-contained no external power requiredHousing Die cast aluminum, epoxy powder coated blue nishSet Point Scale IntegralBellows High pressure brass, corrosion resistant, tin plated nish Adjustment Screw BrassRange Adjustment Spring Cadrrium plated Overrange Protection Upper range limit +100F for temporary situationThermal System Bulb:Copper 0.80 X 8 with union connection for thermowell Capillary: Copper, available in 10 or 20 lengths


Thermowell Steel 1NPT connection Valve Single seat, normally open Body: Cast iron Trim: Stainless steel plug assembly with soft seating viton o-ring, iron seat Port Size: 1/2 Connection: 3/4 NPT or 1 NPT treaded ends Shipping Weight 10.3Lbs (4.68kg) (Approximate)

Excelsior Bale Specialty Items

Excelsior Bales are made of a collection of various cuts of wood which are banded in bale form. They are used as a form of separation of water from the emulsion.

The Excelsior Bale is a long lasting, durable alternative for the separation process. Excelsior has extensive absorption power and have heavy duty wire ties to lock bers in bale form.

DESCRIPTION

Excelsior Bale



61281002 Excelsior Bale

SPECIFICATIONS

Size 16 X 34 X 18 Weight 75 Lbs

Finned Tube PipingSpecialty Items

Finned tube pipe is used for dehydration packages as a lean/rich glycol heat exchanger. The tubing helps reduce energy used by a reboiler thus reducing operational costs.

DESCRIPTION

Finned Tubing



42221010 Finned Tubing Pipe 1 1/4 X 5

CHAPTER 5Coalescing and Filter

Media

Random Packing-Saddles, Ballast & Nutter Rings

Coalescing & Filter Media


Random packing has unique features which are based upon fundamental principles of uid ow.

A look at each feature:Form provides multiple circular crimped strips to encourage liquid surface renewal.

Perforated central trough enhances lateral liquid spreading and effectively wets the outside surface facing vapor ow

Flanged edges and central rib promote lateral liquid spreading around the main element.

Heavily ribbed main element for a high strength-to-weight ratio.

A pair of tapered slots and hoops provides maximum randomness with minimal nesting.

Efciency enhanced by lateral liquid spreading and surface lm renewal.

Superior surface utilization in mass and heat transfer, allowing shorter packed bed heights.

Strength-to-weight ratio sufcient to withstand weight of 50-ft. bed height.

Maximum piece-to-piece contact with minimal nesting.

Lower pressure drop and greater usable capacity enable use of smaller-diameter columns

Reproducible performance assured through uniform randomness.

DESCRIPTION

FEATURES

Ballast Rings

Ceramic Saddles

Nutter Rings

Part No. Description Size Material QTY

61601010 Ceramic Saddles(Half Circle)

3/4 Ceramic 1cuft box

61601012 Paul or Ballast Rings(Full Circle)

1 410 SS 2cuft box

61001014 Nutter Rings(Half Circle)

1 316 SS 2cuft box

Determines the number of cubic feet needed.V= * r2 * H

FORMULA

PERFORMAX CoalescerCoalescing & Filter Media

PERFORMAX Coalescers

Natco revolutionized oil and water separation with the development of the PERFORMAX matrix plate. This coalescing media accelerates gravity separation of oil from water and water from oil with remarkable efciency. It is useful in heated process equipment as well as in ambient separation systems like free-water knockouts. It handles a wide variety of oil and water dispersions in all ranges of API oil gravities.

Large Volumes in Small VesselsThe horizontal coalescer uses an inlet momentum absorber to slow the velocity and distribute the ow of the incoming stream. Then the oil and water mixture ows into the PERFORMAX matrix plate section where the inclined channels accelerate coalescence. (See Figures 1 & 2). Separation efciency improves dramatically because PERFORMAX technology causes the oil droplets to coalesce and rise much more rapidly than smaller droplets in conventional coalescers. (See gures 3 & 4). As a result, the PERFORMAX coalescer handles higher ow rates through smaller vessels and gets better results.

DESCRIPTION

PERFORMAX Coalescer

Coalescing

Why should you consider PERFORMAX matrix plates?

Achieves excellent water quality and 98% removal of oil particulates attainable with proper chemical treatment.

Improves gas quality with lower oil entrainment and eliminates the need for a supplement mist extractor.

Lowers BS&W content with higher quality of discharged oil it allows greater treater efciency and lower fuel requirements.

Reduce chemical costs with lower chemical dosages which improves performance and reduces chemical costs as much as 50%.

Consistent operation under widely variable conditions, it absorbs uctuating ow rates, varying solids contamination and oil and water mixtures to minimize the effects of normal day to day upsets.

Reduce space requirements because the PERFORMAX system uses a single, often smaller vessel with a higher ow rate capacity to achieve better separation efciency. The horizontal vessel minimizes head room requirements.

Lowers operating costs since no power is required for the actual separation process.

No pumps required so the system is totally inline with no head loss in the operation.

Simple installation above or below ground with hook-up to the incoming ow to the water efuent line and oil efuent lines.

High reliability because there are no moving parts and the media itself is easily removable for routine maintenance and cleaning. ASME Code Construction is a Natco standard.

Resists plugging because the open matrix design minimizes plugging problems often encountered with other types of coalescing systems.

Ideal for retro t because PERFORMAX plate sections retrot easily into existing coalesces, free water knockouts and skim tanks to boost their capacities and efciencies.

Vane Pak & MistexCoalesing & Filter Media

Vane Pak

Mistex Pad

Vane Pak

The Vane Pak Mist Eliminator is designed to remove entrained liquid droplets from high velocity gas streams. The rugged construction and open blade spacing can be used in diverse applications. The non-welded, bolt and spacer construction adds an extra edge to corrosion resistance. All the vane paks are designed to meet a wide range of process requirements

Vertical radial ow vane paks are utilized for high gas/oil ratios, any oil gravity and very high gas ow rates. The separation mechanism is impingement and coalescence. They are used in vertical separators

Vertical radial ow vane paks allow higher gas ows through the separator. The radial vane passageways diverge to give better turndown performance

Vertical radial ow vane paks can be retrotted to existing separators.

Mistex Pad

The Mistex Pads are designed for the separation of mist and small liquid droplets from gas or a vapor stream. The theory on the mistex pad is that the liquid particles collide with the wire mesh and coalesce into droplets. Gravity will then cause the droplets to fall through the mesh pad and collect in the vessel. Dry gas will go through the downstream side of the wire mesh while the liquid is removed from the vessel through a dump valve.

The knitted wire mesh is rolled and available in different sizes and shapes. The material is a 9# density and is available in 4 and 6 thicknesses and the grade of the material is 316 Stainless Steel.

DESCRIPTION

DESCRIPTION

CHAPTER 6Filtration

Nacto Filter Elements

MistTrap Aerosol Coalescer Filter ElementSureTrap Gas-Particulate Filter ElementSureTrap Liquid-Particulate Filter ElementSureTrap Carbon Filter ElementFluidSep Liquid/Liquid Separation Filter Element

Natcos FluidSep Liquid/Liquid Separation Filter Element utilizes a specialty media that increases suspended water removal and decreases costs even under some of the most difcult situations for reners.

Renery products are negatively affected by water; therefore, reners must put in substantial equipment, materials and labor into water removal. It is necessary to remove water from fuel due to its corrosive nature. Water contains various corrosive materials, such as chlorides and caustic that can wreak havoc on renery or other types of equipment. Water can corrode tank bottoms and promote bacterial growth. Processes such as steam stripping, caustic treating and amine treating inherently add equilibrium concentrations of water under normal operating conditions

Natcos FluidSep Liquid/Liquid Element media is a composition of inorganic microbers of various cross sectional diameters designed to maximize efciency.

Great care is taken in fabricating the FluidSep lter media matrix into a durable lter element of superb quality. Materials used in this element (support cores, end caps seals, etc.) have been carefully selected to ensure fabrication integrity, uid compatibility, and reliable collapse ratings

Cost Effective Removes suspended water that can promote corrosion in equipment.

Beta Rated Filtration Predictable efciency to the specied particle size during the life of the lter.

Long Life High surface area resulting in more holding capacity

Chemical Compatibility FluidSep Filter Media is compatible with most process uid chemicals

Filter ElementsFiltration

Filter Elements

DESCRIPTION

FEATURES

Activated Carbon Adsorber Double Element Filter

The ACF-750-2 lter is designed for 5 gallons per minute (max. 7.5 gpm) and will handle a glycol system with 1200-1500 gallons of glycol. Based on theseparameters, the lter element should last approxi-mately six weeks on a reasonably clean system.

C1 Inlet 2C2 Outlet 2C3 Press. Conn. 1/2C4 Drain 1/2Head: Hinged Cap.ASME Code 50 psig @ 150F

ACF-750-2 Element/FilterFiltration

DESCRIPTION

SPECIFICATIONS

Vessel Model No. ACF 750-2 Stock No. 48162512 Size: 12-3/4 * 4-0Working Pressure 140psig ASME CodeDesign Flow Rate 5gpm (max. 7.5 gpm)Filter Elements (LP920) No. 61282220 Model No. 1120-C Size: 10-3/4 * 20 Carbon Approx. 30 pounds (12 * 20 MESH) Closure O-RingReplacement 12 O-Ring No.47351012



48162512 Model ACF-750-2 Filter(Less Manifold and Valving)

*Manifold and Valving Installed per Recommended Hook-up Drawing on Side.Quantity orders of 15 or more, full freights allowed.


61282220 Model 1120-C LP920 Replacement Elements(Two Elements Required)

ACF - 750 - 2 Filter

Activated Carbon Adsorber Filter

Average life of an ACF-1002-1 element on a reasonably clean system is usually between six to eight weeks.

Vessel Model No. ACF-1002-2 Stock No. 48162501 Size: 10 * 32Working Pressure 150psig PSIG W.P. non-codeMax. Temp 200FConnection 1 Flow Rate 1-2 gal/min. Filter Elements Model No. LP830 Stock No.61282830 Size: 8 * 20Carbon Activated carbon element Disposable cartridge Replacement Gasket No.47702250(G9)

ACF-1002-1 Element/FilterFiltration

DESCRIPTION

SPECIFICATIONS



48162501 Model ACF-1002-1 Filter Complete with OneLP830 Element (Less Manifold and Valving)

*Manifold and Valving Installed per Recommended Hook-up Drawing on Side.Quantity orders of 15 or more, full freights allowed.


61282830 Model LP830 Replacement Elements(Single Element Required)

ACF - 1002- 1 Filter

CHAPTER 7Desiccant

DESI-DRI Type HPADesiccant

DESI-DRI HPA Gas Drying Tablets

Water vapor is a common impurity found in natural gas. Operating problems caused by condensing water vapor can include: gas line freezing, formation of hydrates in meters, valves etc. and corrosion due to wet conditions. Most pipeline companies require some level of gas quality. DESI-DRI HPA is an inexpensive way to reduce moisture content of natural gas. DESI-DRI HPA can be used in systems with higher temperature gas. The tablet allows for good contact between the gas stream and the medium, which will reduce channeling and bridging and gain maximum drying effectiveness. DESI-DRI HPA can be used by itself or in combination with other grades of desiccant, such as DESI-DRI C. In this application the natural gas ows through the DESI-DRI HPA rst, removing the majority of the moisture and then through the DESI-DRI C to further reduce dew points. This arrangement is more cost efcient because the more expensive DESI-DRI C lasts longer.

DESI-DRI HPA is a tablet that has several advantages over competitive pellets and briquettes.

Made with over ten tons of compression.

Harder, more dense tablets resist caking, channeling,blooming and dusting

Minimizes re-crystallization in sump with gas temperature above 85F.

Purity 95%Appearance White TabletDiameter 1Height 0.735Tablet Width ~9.5 grams Bulk Density 69-62lbs/cu.ft Solubility in Water Complete

DESCRIPTION

DESI-DRI HPA

SPECIFICATIONS

FEATURES



61285075 50lb. boxes

DESI-DRI Type CDesiccant

DESI-DRI C Gas Drying Tablets

Natural gas pipeline moisture specications can be difcult to meet. Desiccants lower relative humidity to an acceptable level. Unfortunately, common desiccants often do not take enough water out of the gas to meet more stringent specications. DESI-DRI C is three times more effective than the more common desiccants. DESI-DRI C effectively lowers relative humidity to meet gas pipeline specications.

DESI-DRI C can be used by itself or in combination with DESI-DRI HPA. In this application the natural gas ows through the DESI-DRI HPA rst, removing the majority of the moisture and then through the DESI-DRI C to meet specications. The arrangement is more cost effective because the DESI-DRI C lastslonger. DESI-DRI C is a tablet that virtually eliminates powder and broken briquettes.

DESI-DRI C is a tablet that has several advantages over competitive pellets and briquettes.

Made with over ten tons of compression.

Harder & more dense tablets resist caking, channeling, blooming and dusting.

High purity means greater activity, longer life and lower dew points.

Tablets virtually eliminate broken, shattered and dusted product.

Purity 98.5%Appearance White TabletDiameter 1Height 0.775Tablet Width ~14.75 grams Solubility in Water Complete

DESCRIPTION

DESI-DRI C

SPECIFICATIONS

FEATURES ORDERING INFORMATION


61285083 35lb. pails

DESI-DRI Type DDesiccant

DESI-DRI D Gas Drying Tablets

DESI-DRI D represents the most advanced technology in gas drying deliquescent to date. Produced as a eutectic in a novel patented process, DESI-DRI D eliminates many of the drawbacks that have been historically associated with conventionally produced gas drying tables. Since a eutectic pellet represents a homogeneous new crystal-line form, the problems of tablet compression, disintegration and dusting are virtually eliminated. DESI-DRI D has been developed to meet the economic, environmental and performance requirements of a more demanding gas processingmarket. It also has been engineered to meet new dew point requirements where other desiccants can not. The drying performance of DESI-DRI D surpasses that of competitive lithium based drying tablets.

DESI-DRI D should be used in a single pass multistage, high pressure contractor. DESI-DRI D drying systems can be installed downstream of DESI-DRI A dryers to minimize the consumption of product.

Outlet moisture levels from a DESI-DRI D drying tower are determined by the physical properties of the gas. Lower temperatures and higher pressures tend to improve performance, while the opposite is true for higher temperature and lower pressures.

DESI-DRI D drying systems have several advantages over competitive gas drying options.

Dusting problems eliminated by unique pellet composition.

Caking & channeling are reduced or eliminated by fast deliquescent action.

Closed drying system results in no emissions, no fuel consumption or environmental concerns.

20lb Moisture/MMCF attainable at pressures as low as 50pis at 60F.

7lb Moisture/MMCF attainable at pressure as low as 125pis at 60F.

DESCRIPTION

DESI-DRI D

SPECIFICATIONS

FEATURES ORDERING INFORMATION


61285084 50lb. boxes

Purity 99%Appearance White TabletDiameter 3/8Height 1/2Tablet Width ~7.5 grams Bulk Density 80-85 lbs/cu.ftpH (50% in solution) 3.0-4.0

DESI-DRI Type EDesiccant

DESI-DRI E Gas Drying Tablets

Natural gas dehydration at low pressures and low ow rates can be very difcult. Most conventional salt-type desiccants are unable to adequately dry gas under very low pressure (7 lbs. H2O/MMCF) must be met. DESI-DRI E was developed to meet dew points where other desiccants or glycols can not.

DESI-DRI E can be used by itself or in combination with other grades of desiccant, such as DESI-DRI C and DESI-DRI HPA. In this application the natural gas ows through the DESI-DRI HPA or C rst removing the majority of the moisture and then through the DESI-DRI E to further reduce dew points.

DESI-DRI E tables have several advantages over the low pressure gas drying options.

7lb/MMCF attainable @ 50psi and 60F

20lb/MMCF attainable @ 25psi and 80F

Dryer gas for less cost than glycol towers in many instances.

Greater hygroscopicity means more H2O removed per pound of desiccant.

Hard dense tablets resist caking, channeling, blooming and dusting.

Purity 98%Appearance White TabletDiameter 3/8Height 1/2Tablet Width ~7.5 grams Bulk Density 80-85 lbs/cu.ft pH (50% Solution) 3.0 4.0

DESCRIPTION

DESI-DRI E

SPECIFICATIONS

FEATURES



61285085 35lb. pails

Answers to Common Questions

History of desiccant drying:

Deliquesant desiccants have been used to dehydrate natural gas since the 1920s and historically have been primarily utilized by independent operators at relatively low ow capacity installations. Consequently, equipment was frequently pieced together on location and the main drying vessel resembled a vertical separator with a screen inserted to support the desiccant. As design ow rate increased the, pot, style dryer was simply increased. How ever this led to numerous operational problems such as channeled gas ow, which causes washouts and velocity problems within the desiccant bed. This results in inadequate drying, bridging of desiccant and uid and desiccant carryover in to the downstream gas line. These, pot, style dryers were typically designed to operate at a linear velocity of 0.25 to 0.75ft/sec. Consequently, deliquesant desiccant dryers were seldom used for higher ow (over 10MMscfd) applications. Also many of the early desiccant dryers were actually converted air dryers and were designed for low pressure. This led to the misconception that deliquesant desiccant dryers could only be used for low ow and low pressure systems.

What are desiccants and how do NATCO desiccant dehydration systems work?

Deliquesant desiccants are primarily made from various blends of alkali earth metal halide salts and are naturally hygroscopic. Water vapor is removed from gas as it ows through a bed of desiccant tablets in a pressure vessel. Moisture is attracted to salts in the deliquescent tablets and coats them with hygroscopic (water attracting) brine. This brine continues to attract water and forms a droplet and then ows down the desiccant bed into a sump. An automatic level controller and control valve then discharge the efuent water into a storage tank. Common brine water is the only byproduct. Since the desiccants dissolve upon attracting and absorbing water vapor (deliquesce), new desiccant is simply added to the vessel when needed.

How long will the desiccant in each vessel last?

This is a common question that is a function of a couple of variables. The rell rate of the vessel is a function of the volume of desiccant contained in each vessel and the total quantity of water that is removed from the gas stream to meet the customers outlet gas specication. Please note that the consumption of the various types of desiccants are different; therefore the rell rates in a multistage system will all be different. Also in a multistage system the rst vessel will remove approximately 70% of the water and will be the vessel that will need to be serviced the most. The NATCO engineering design program can be used to design a system to meet the customers needs. It is important to remember that for the vast majority of situations, rell intervals are not a critical issue. Most production sites are visited every day or two and the rell process, except for very large systems, takes no more that 30 minutes. Longer rell intervals require larger or more vessels and consequently higher equipment costs. Stress the ease of the rell operation unless the customer has a legitimate reason for extended rells, such as a remote site location or sour gas, etc.

Will the desiccant system work in sour gas production?

Yes the desiccant dehydration technology will work in sour gas production and is a denite benet because it eliminates odor problems caused by H2S and unwanted stack gas emissions such as SO2. There are desiccant dryers in operation today that are dehydrating sour gas with H2S concentrations of 30,000ppm. Additionally, dry desiccant units are successfully operating on gas streams containing 20% by volume of CO2. These desiccants will operate on pure H2S and CO2 gas streams.

Whats new about DESI-DRI desiccant technology?

Below is a comparison between old calcium chloride technology and the NATCO DESI-DRI technology.

Old Technology The DESI-DRI Difference & Solution

Soft, crumbly briquettes Hard compression and eutectic tablesPorous briquettes Non-porous, low permeability tabletsBlooming and caking No blooming or caking, tablets retain their hardness Bridging in the dryers No bridging due to better tablets and equipmentChanneling of the gas ow No channeling due to superior equipment design Broken briquettes and powder Hard tables do not break in storage and shippingDust carryover down line No dust with hard tabletsLimited drying ability Different grades provide very dry resultsPlugging of vessel trays No trays to plugComplicated equipment Very simple equipment operationTall towers difcult service Low prole units, very easy & safe to serviceUnpredictable results/usage Predictable performance and operating costsVery little engineering Tablets and equipment supported by computer simulation

What are the best applications for desiccant dehydration?Some of the best applications for desiccant dehydration are listed below:

- Medium and high pressure sales gas - Cool sales gas (less than 80F) - Hydrate control in pipelines - Free water control in pipelines - Fuel gas for compressors, line heaters, chiller engines, generators, etc. - To eliminate emission and odor problems with TEG units by replacing them - Environmentally sensitive areas where VOCs, NO_ and BTEX emissions as well as ground contamination are an issue. - Replace oversized TEG units- Drying sour gas streams - Instrument gas - Temporary, portable or short-term rental applications - Remote sites - Very low pressure (10 to 50 psig) gas where TEG does not work and is not feasible - Floating production platforms ( no pitch and roll considerations) - Floating production barges

What are the advantages of desiccant dehydration?There are a lot of advantages to the desiccant dehydration technology over other methods used to dehydrate natural gas. Some of the advantages are listed below:

- No VOC and BTEX emissions- No ground contaminations from glycols- Easy installations- No costly disposal- Simple operation- No re hazard- Low maintenance- No pumps, burners or heat exchangers- Low predictable operating costs- No turn down limitations- Low capital expenditure

How do you know when it is time to add desiccant to the system?

The NATCO engineering program is used to calculate the life bed of a vessel for a given set of process conditions. After each unit is installed at the customers production site it is recommended that the vessel be reopened after a few days of operation to measure how far the top of the desiccant bed had dropped inside the vessel. If the bed has dropped 1 to 0 over a three day period and the bed height is 4 to 0, this probably means that the vessel will need to be lled every nine days, since 1 to 0 of desiccant should remain in the vessel at all times. Over time the person responsible for lling the vessel will get a feel for when each vessel needs to be relled with desiccant.

Changes in the inlet gas temperature, pressure and the duration of down time at the facility will affect the time interval at which the vessel needs relling. Each vessel is designed with a 1-1/4 3000# sight port on the side of the vessel, which is located 1 to 0 above the bottom of the desiccant bed. It is important to never let the desiccant height in the vessel drop below 1 to 0, as this will start to affect the outlet gas stream.

To what level should the vessel be lled with desiccant?

Fill each vessel with the correct desiccant until the desiccant height is approximately 1 below the gas outlet. The dryer vessel has a stainless steel screen welded inside to cover the nozzle opening. This screen will prevent tablets from falling into the gas outlet piping should the dryer be overlled. Overlling the dryer will not cause any operational problems in a properly designed desiccant dehydration system.

How do you dispose of the brine?

Almost everyone asks about the disposal of the brine (salt water) at the bottom of the dryer vessel. The brine is piped to the customers water storage vessel and disposed of with all other production uids. It is important to note that dryers produce a very small amount of brine when compared to other production uids. A dryer owing 20MMscfd at 1250 psig and 70F, drying 5# water/MMscf outlet gas spec produces only one barrel per day, assuming the inlet gas stream is completely saturated with water vapor.

Will the brine in the dryer vessel cause corrosion?

For corrosion to occur, free oxygen must be present. The brine inside the vessel will not cause corrosion in the dehydration of any gas streams in which oxygen is not present. Natural gas, CO2 and H2S contain no free oxygen. In any dry desiccant systems in which free oxygen is present, corrosion is a major design concern. The vessels can be coated internally with an appropriate system. Carboline and other major coating manufactures have systems specically designed for salts. Additionally, the drain piping and valves must be appropriately protected through the use of stainless steel trim in the valve and internal coating in the piping of the use of stainless steel pipe.

CHAPTER 8Service

The Operating Advantage

Natco Canada, a major designer and manufacturer of oil and gas process equipment now has strategically located sales and service centers throughout Alberta and British Columbia.

These sales and service centers carry an inventory of parts and supplies consisting of new and reconditioned process equipment, therefore allowing for faster service and delivery. This minimizes downtime and production loss and the opportunity to provide the best customer service.

Natco Canada Ltd. has branch locations in:



Natco also offers fully equipped shops that are capable of all types of vessel repair, modications, re tube construction and repairs, pipe spooling construction, instrument and electrical work.

Our operating personnel are extensively trained on all types of process equipment. This allows the operators to trouble shoot and make maintenance repairs as needed. A top-notch engineering department assists all of our operators and sales and service centers with any problems that may arise due to design. Qualied operations experts hold process-training courses for our customers on a regular basis if required. Safety is a key element in our organization, as Natcos safety record is one of the best in the industry. Our company possesses a Certicate of Recognition and is also a member of Manufactures Health and Safety as well as part of their Mentorship program. Natco is also a member of the Gas Processors Association of Canada who has awarded Natco Canada Ltd. on an annual basis. All current certicates and memberships are up dated on a regular basis. Natco will continue to focus on safety and safety programs as it is such and important part of the oil and gas industry today.

ServicesField Maintenance Services

- On site Engineering/Consulting- Process Troubleshooting Start-Up- Drafting- Control System Design- Process Piping Design- Pressure Vessel Design- Instrumentation/Electrical

- On-site Pressure Vessel Repairs- On-site Pressure Vessel Retrots/Modications- Pressure Piping Fabrication, Installation and Repair- Commissioning and Decommissioning- Pressure Vessel / Process Piping Design

- Burner Heater Control Installation, Tuning and Repair- Treater Grid System Installation, Inspection and Repair- Process Control System Troubleshooting and Repair- Set-Up and Tie-In of Process Equipment- Turnarounds Complete

- On-Site Sandblasting, Coating and Painting- Operating- Well Testing and Well Blow Down- Welding Services- Pipetting- Labour Crews- Planning, Co-ordination, Supervision & Execution of Turnaround Projects

TECHNICAL

A One Stop ShopField Maintenance Services

PRESSURE VESSELS/PIPING

MAINTENANCE SERVICES

OTHER SERVICES

Picker Trucks, Crew Trucks, Rig Welders, Instrumentation, Electrical, Sandblasting and Coating.

Approved Quality Control Manual for on Lease work of Pressure Vessels and Process Piping in Saskatchewan, Alberta, British Columbia and Northwest Territories

CHAPTER 9Grid Components

Grid ComponentsTransformer & Accessories

EBD-1500 Entrance Bushing Installation

*Be sure the white insulating portion of the entrance bushing is extended into the oil phase far enough to remain covered when the grounding oat balls in the low (shorted) position.*Both the (+) and (-) DC electrodes are similarly connected to their polarities on the diode pack.

Contact your nearest Natco Service Centre for Service & Parts & SizingToll Free: 1-800-661-6628

GRID COMPONENTS & ACCESSORIES


48126009 EDD 1500 Entrance Bushing (Body)

48126048 High Voltage Cable (78)

11650065 PFA Tubing 5/16 X 7/16 (78)

11650067 PFA Tubing 5/8 _ (78)

48126051 Entrance Bushing (120)

N/A Entrance Bushing Over 120

(Special Order)

42220000 Transformer Oil (20 Liters)

42221000 1 Entrance Bushing Flex

42221006 1/8 SS Wire Rope

42220002 1/8 Cable Clamp

48126010 1/8 Cable Weight

48400010 3 150 2 Thick Entrance Bushing Blind

48400020 4 150 2 Thick Entrance Bushing Blind

48400022 10 X 2 Extension Nipple




42001800 NWL Transformer Lid Clips

48012218 8 ft Teon Hanger (Standard)

48012220 6 ft Teon Hanger (Standard)

N/A High Strength Hanger (HTA-15)

N/A High Temperature Hanger (HTA-2000)

N/A Howmar Solid Rod Hanger (2) (M.3009-380)

48126035 TI-23 Insulator (Transformer)

N/A TI-60 Insulator (Transformer)

N/A TI-60FT Feed-through Insulator

61321121 0-100 VAC Voltmeter

N/A 0-XXX AAC Amp Meter

N/A CI-1 Div 1 Meter Housing

N/A Light Fixture CI- 1 Div 2

N/A Transformer Breaker (Special Order)

42001122 2 Amp. Fuse/Holder

N/A Steel Grid Plates and Hard Ware (Special Order)

N/A Composite Fiberglass Grid Plates (Special Order)

48012200 Fiberglass Wing Tips for Steel Grid Plates

Natco Electrostatic Grid Transformers and Controllers

Load Responsive Controller (LRC)

- Provides a one-programmed voltage prole sequence to the grid transformer to produce optimum, or specic, coalescing / mixing for crude oil treating.

- Monitors the Treater Grid performance and protects all components against upset or dangerous conditions such as electrical over load.

- Returns the grid system to normal operation immediately after the occurrence / correction of upset condition

- Quenches the power to terminate high current arcing situations.

Dual Frequency Controller

- The Dual Frequency process improves the performance of an electrostatic dehydration process by creating a high voltage eld that promotes aggressive water droplet movement and coalescence. The Dual Frequency process overcomes the problem created by high oil conductivity and low interface tension.

- By using the high frequency transistors to control the voltage levels, the Dual Frequency transformer is capable of combining a high frequency base voltage with a low frequency modulation. The high frequency signicantly reduces the voltage decay from the electrodes and sustains the DC voltage eld. The low frequency provides a controlled droplet oscillation and prevents droplet dispersion.

- In addition to the improvements in process performance, the Dual Frequency process typically provides the best performance at lower voltage levels then the typical Dual Polarity or AC processes. This reduces the electrical stress imposed on hangers, bushings, cables, diodes, etc.

Natco NWL Grid Transformers

- 5 250 KVA sizes (sized to grid area requirements)

- Primary voltage: 240, 400, 480, 600 VAC, 50 Hz or 60 Hz rating, 1 phase

- Secondary voltage: 12, 16.5, 20, 23, 25 KV DC voltage tapes

- 35% or 100% reactance core windings

- Certication: UL / CSA/ EX Class 1, Div 2

- Transformer is oil lled

- AC to DC High Voltage is diode rectied

When ordering transformer parts or accessories you will need to speak with a qualied technical advisor that can be contacted at

Toll Free: 1-800-661-6628

Grid Transformers & ControllersTransformer & Accessories

CHAPTER 10Natco Process

Equipment & Solutions

PROCESS EQUIPMENT Horizontal Treater

Natco Processing Equipment & Solutions Various Equipment & Types of Vessels

Processing Equipment & Solutions

Natco Canada Ltd. continues to be the worldwide leader in design, manufacturing and service of process equipment and integrated systems for the oil and gas production industry. Our process equipment provides quality solutions with superior technology, continuous innovations, research and development that provides reliable quality products and services. Natco Canada Ltd. solutions for process equipment are as listed below:

Separator Solutions-Liquid & Gas Dominate Processing

Crude Oil Dehydrating & Desalting

Crude Oil Desalting Solutions

Crude Oil Dehydration Solutions

Gas Conditioning Systems

Produced/ Oily Water Treatment Systems

For more detailed technical information visit www.natcogroup.com or call one of the following locations for a qualied technician.



NATCO Catalogue

Documents

Transcript of NATCO Catalogue