NAS/MS Aerospace Standards - Nafco Usa the Design and Manufacture of ... Fixed, Floating, Capped or...
Transcript of NAS/MS Aerospace Standards - Nafco Usa the Design and Manufacture of ... Fixed, Floating, Capped or...
ISO 9001: 2008 / AS9100:2004 Certified For the Design and Manufacture of Aircraft Fasteners
Nutplates – Floating, Fixed, Corner, Right-angle
Press-in Inserts – Fixed, Floating, Capped or Open Style
Dome Nuts – Sealed, Floating
Nutstraps – Multiple Configurations
Gang Channel – Most Types
Specialty Nut Products – Customer Specification Control
Conformance to NASM25027 and AS8879
NAS/MS Aerospace Standards
NAS1791 / NAS1792
Clip Retained Nutplates
♦ One Lug, Two Lug
♦ Replaceable Nut Element - (NAS1794 Nut Elements Available Separately)
♦ CRES and Alloy Steel
♦ All Counter Bores
NAS1473 / NAS1474
Sealed Dome Nuts
♦ CRES and Alloy Steel
♦ Multiple Material Configurations
♦ Short Lead Times
Email: [email protected]
Website: www.nafcousa.net
Phone: 775-246-5511
Fax: 775-246-5514
Address: 1744 Forrest Way
Carson City, NV 89706-0311
♦ NAS/MS Standards
♦ Top Quality
♦ Full Certifications
- (Physical/Chemical/Test Reports)
♦ Fast Delivery
100% Made in the USA #002/2009
Fast Quotations and Order Information Email: [email protected]
NAFCO USA is a Stocking Manufacturer
Connector/Instrument Nutstraps
Manufactured to:
♦ AS85049/94,/95,/96
♦ M85528/1,/2,/3
♦ Customer Configurations
Press Inserts
♦ All M45938 Series
♦ Floating / Fixed
♦ All Material Types
♦ Single and Double Knurl
Gang Channel
♦ CRES and Aluminum
♦ Lengths to 72 Inches
♦ CRES/Steel Nuts – All Counter Bores
NAS1033 Right Angle Nutplates
♦ Floating
♦ All Locking Types
♦ Most Thread Sizes and
Materials
www.nafcousa.net #002/2009