Nantai Catalog New

http://www.nantai-china.com

Degang Zhang(manager) 008613455388360 1

NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD

TAIAN NANTAI EXPERIMENTAL EQUIPMENT CO.LTD Manager: Degang Zhangmanager Mobile Phone:+86-13455388360 TEL: +86-538-6627598 FAX+86-538-6627679, +86-538-6627668 E-mail: [email protected](MSN) [email protected](MSN)

[email protected]( MSN) [email protected](MSN) [email protected] [email protected] [email protected]

ICQ: 402039175 Skype: sanxiang1234 chinanantai1 Yahoo Massager: [email protected] ,[email protected] QQ: 187096649 Google talk: [email protected], [email protected] Web Site : www.nantai-china.com



DIESEL FUEL INJECTTION PUMP TEST BENCH

12PSB-IV

Digital controller

(English language)

(Russian language)

NT2001/NT2001PLC NTS619

NT3000

Computer controller

(English language)

(Russian language)



NTS815 electronic fuel delivery measuring system test bench z Introduction

Diesel fuel injection test bench is design for customers require. This series test bench adopt high quality frequency conversing device, and it has characteristic with hi-reliability, ultra-low-noise, energy save, high output torque, perfect auto-protecting function and operate easy. It is the kind of product with high quality and good price in our business.

Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps EP/VA,EP/VM,VE.F,also used for Chinese pumps such as ,,,K,P7,BQ.etc.

FUNCTION 12PSB-IV NT2001/ NT3000/ NTS619

NT2001PLC

NTS815

1,Measurement of each cylinder delivery at any speed

2. Test point and interval angle of oil supply of injection pump.

3. Checking and adjust the mechanical governor.

4. Checking and adjusting the distributor pump.

5..Experiment and adjusting of behavior of supercharging and

compensatory device

6. Measurement of oil return of distributing pump

7. Testing of the electromagnetic valve of distributor

pump.(12V/24V)

8. Measurement of the internal pressure of distributor pump.

9. Checking of the advance angle of advance device.

10. Checking the sealing of injection pump body

11. Install tube of auto-sucking oil supply can check on oil

supply pump(including VE pump.)

12, Two operating systems (Computer control + Digital

control)



13, Digital control systems

14, Electronic fuel delivery measuring system

15, LCD touch screen

16, TRAVEL OF TOOTH BAR (On request) (On request) (On request) (On request)

17, OIL LUBRICATE (On request) (On request) (On request) (On request)

18, FORCED COLLING (On request) (On request) (On request) (On request)

Technical characteristic

Standard accessory of test bench

For 12PSB/ NT2001/ NT2001PLC/ NT3000/ NTS815 etc test bench

Oil lubrication station

optional function of test bench



COMMON RAIL TEST SYSTEM

(1)COMMON RAIL INJECTOR TEST BENCH

PQ1000 PQ2000 CRI-2000

PQ1000, PQ2000, CRI-2000 used to test kinds common rail injector, they adopt digital controller. PQ1000 and

PQ2000 need connect air pressure pump to normal working, CRI-2000 have pump inside, it can work itself.

Function : 1, it can be used to test Bosch, Delphi, Denso, Siemens injector. 2, check the injector starting pressure 3, check the injector spray quality 4, check the seal of injector. 5, check injection quantity and back oil quantity. 6, check the injector oil flow 7, check the injector pre injection and main injection

NTS200 NTS300 NTS200/NTS300 COMMON RAIL TEST BENCH is the professional test bench which is used for testing common rail system, can finish the high-pressure common rail system functional testing. NTS300 with inverter working more well.



Function 1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO. 2. Test 1 piece of injector. 3. Test the pre-injection of common rail injector. 4. Test the max. oil quantity of common rail injector. 5. Test the cranking oil quantity of common rail injector. 6. Test the back flow oil quantity of common rail injector. 7.Test the average oil quantity of common rail injector. 8. Test the seal performance of common rail injector. 9. Data can be searched and saved.

(2)CR3000,CR3000A,CR3000A-708 COMMON RAIL TEST BENCH

CR3000( Picture 1 ) CR3000(Picture 2) Product Functions CR3000 is for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being

tested. CR3000 common rail Tester can used for testing following pumps:

BOSCH CP1-H BOSCH CP1-KBOSCH CP3DELPHI SIEMENS, DENSO HP2 AND HP3. It has the functions to test the Electromagnetic and Piezoelectric(optional function) injectors.

It also can test 6 common rail injectors in one time.



CR3000A (MODE1) CR3000A (MODE2) CR3000A-708 Mouse and keyboard------------------------------------ CR3000A (MODE1) ,CR3000A-708 LCD touch screen------------------------- CR3000A (MODE2)

CR3000A /CR3000A-708has all common rail pump, injector data inside. CR3000A/CR3000A-708 COMMON RAIL TEST BENCH is mainly test for common rail pump and injector. Also it is continuous fuel delivery analysis computerised measuring system for conventional and new diesel injection systems. The electronic fuel delivery measuring system is compulsory for modern diesel injection system testing. It guarantees a high level of reproductivity of the measured valuse. CR3000A COMMON RAIL TEST BENCH is the professional test bench which is used for testing common rail system, can finish the high-pressure common rail system functional testing. >>>System Application: The system is suitable for detection of BOSCH, DENSO, DELPHI and SIEMENS common rail pump and injectors. Such as CP1, CP2.CP3, HP3 series injector pump and the type of Electromagnetic injectors, It also can test 6 common rail injectors in one time. >>> Technical parameters



1, Main motor speed: 0-4000 r / min can be adjustable. 2, Motor power: 7.5KW, 11KW, 15KW, 18.5KW optional. 3, Fuel Injector open voltage Control range: 12V, 80V, 150V Control accuracy: phase adjustment 4, Injector opening frequency Control: 0-1000HZ Control accuracy: 1HZ 5, Fuel Injector Hold Time Control: 0-65535us 6 Delivery Oil CountControl: 0-1000 times Control accuracy: 1 times 7, Fuel pressure control Control: 0-2000bar Control accuracy: 1bar 8, Electronic power: 3 PHASE 380V or 3 PHASE 220V >>>Optional function: 1, Test piezo injector function. 2,Test HP0 pump function. 3, With Bosch DRV VALUE 4,Checking the pump flowing.

(3) CRS200,CRS300 Common Rail Tester System

CRS200 connect with NTS815 CRS200 CRS200 ACCESSORIES

CRS300 connect with NT2001 CRS300 CRS300 ACCESSORIES

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CRS200/CRS300 common rail Tester can used for testing following pumps: BOSCH CP1CP2CP3DELPHI, SIEMENS, DENSO HP2 AND HP3. It also can test 6 common rail injectors in one time. >>>CRS300 is computer system, it include common rail data inside. Main technical parameters 1. Injection open pressure: 5. Pump model :CP1,CP2,CP3,HP0



Control accuracy: stage regulator 2. Injection open frequency: Control range: 0-1000HZ Control accuracy: 1HZ 3. Injection open hold time Control range: 0-65535us Control accuracy: 1us 4. Delivery counts Control range: 0-1000 Control scope: 24V, 80V, 150V, Control accuracy: 1times

6. Fuel pressure control Control range: 0-200Mpa Control accuracy: 1Mpa Control way: PID 7. Power:220V 8. Work temperature: 0-40 9. Relative humidity: 20-90%RH

(4)Common Tail Tester Simulator

Photo Mode Describe

CR2000 common rail tester

It can test 6 common rail injectors in one

time 1. PUMP-CR2000 , it for test common rail pump 2. EM-CR2000 , it is used to test electromagnetic injector 3. PE-CR2000 it is for test piezo injector 4. ACCESSORIES (rail, pressure sensor, oil pipe, coupling and so on)

CR2000A common rail tester

It can Electromagnetic injector and

common rail pump



EM-CR1000

It can test Electromagnetic injector, One by one. For BOSCH, DENSO, DELPHI injector

PE-CR1000

It can test Piezoelectric injector, One by one. For SIEMENS injector

CR1000

It can test Electromagnetic and Piezoelectric injector injector, One by one. For BOSCH, DENSO, DELPHI, SIEMENS injector

CRP680

It is used to test these pump: BOSCH CP1BOSCH CP2BOSCH CP3 DELPHISIEMENS, DENSO HP0,HP3 AND HP4.

PQ400-CR2

The repair tester for Common Rail Injector simulates the outputs of an Engine Control Unit (ECU), by providing fuel injection control signals, of which the parameters may be set by a user, to drive the solenoid of a common rail injector.

CR1000A

It can be used to test electromagnetic injector, 1 pc one time.For BOSCH, DENSO, DELPHI injector It is EM-CR1000+S60H nozzle tester



Electronic pump tester

Photo Mode Describe

VP37 EDC PUMP

TESTER

It Mainly used for testing Electronic VP37 Pumps.

VP44 PUMP TESTER

It is used to test BOSCH VP44 pump

DENSO ECD-V3 & V4,

ECD-V5 pump tester

simulator

It is for DENSO ECD-V3 & V4, ECD-V5 pump

Zexel RED4 Electronic

control In-line pump

tester

It can adjust all kind of the RED4

Eletronic speed device in-line pump

made by Japan Zexel Company. The

functions and charateristic of the

controller as well as the testing data are

completely same as the original one.



EUI/EUP Tester system

It can test kinds of EUI/EUP injector, you only need to change different adaptor, now we can provide 6kinds adaptor

HEUI TEST BENCHcomputer system

Improve fuel economy & enhance performance

Measurement fuel delivery of four HEUI injectors

Sealing test for injectors upper seat of the solenoid control valve.



PT CUMMINS SERIES

EPT2000 PT/EUI injector flow test bench

It is special equipment used to provide adjustment of flux test for

CUMMINS PT fuel injector. It can simulate the running condition

of engine. It has high measure precision, quick sampling speed,

extraordinary property, and convenient operation.

Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD

fuel injectors flow test adjustment or spurt inclination test.

It also can test the flow of all EUI/PT injector and also EUP.

PT 212 PT fuel pump Test bench

PT 212 PT fuel pump Test bench is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It has abundant functions, high measure precision, and fast sampling. For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PTGSVS, PTGAFC, PTGAFC-VS, PTR, PTH-VS fuel pumps etc and damping ASA valve. Functions 1.Gear pump pressure and vacuum test 2. Idle speed test 3. Weight assistant pressure test 4. Pressure and flow test in every check point 5. AFC test 6. Oil stopping test 7. Route test ofthrottle 8. Oil return test of throttle 9. ASA valve test 10. EFC test 11. Shut down valve test

PT 201 PT fuel pump test bench

It is special equipment used to provide test and calibration for

CUMMINS PT fuel pump. It matches the driving system of fuel

injection pump stand, and has strong integrative function.



PT101 Top Stop

Setting Fixture

Top Stop Setting Fixture-All PT (type D), STC (HVT), and Hyperbar Top Stop Injectors. Measuring fuel injector volume completed, we must test the injector plunger subassembly. (including STC (HVT) and hypervar top stop injectors). This Top Stop Setting Fixture used to the test of the injector. After the leakage testing of the injector is completed, the injector can be assembles to the point where the plunger top stop, or plunger travel setting can be made.

PT 301 Leakage Tester

It is special equipment used to provide seal test for PT CUMMINS Fuel injectors. It has quick sampling speed, extraordinary property, and convenient operation. Fit for: 5/16" and 3/8"PTB, PTC, PTD and 3/8" overhead PTD fuel injectors seal test. Functions: 1.. PT fuel injector cylinder block seal 2. PT fuel injector cylinder seal 3. PT fuel injector ball check valve seal

PT 800 PT fuel pump Injector

Fit for: PTGPTGVSPTGMVSPTGSVSPTGAFCPTGAFC-VSPTHVSPTRfuel pumps etc. Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel injectors etc



NOZZLE TESTER

PJ-40 Nozzle tester

It employ the characters of boost speed, high-stability, reasonable structure, flexible operation, fix convenience. PJ-40 Nozzle tester is the ideal instrument calibrating and testing fuel opening pressure, atomization, fuel angle and confined of needle. Main technical characteristic 1. max pressure 40MPa ,2. size of outside 320300500 3. net weight 30kg ,4.pressure gauge range 0-60Mpa

PS-400A NOZZLE TESTER

1. Initiative injecting press of injector 2. Sound of needle valve vibartion 3. spraying shape 4. Sealing function of needle valve and nozzle body mating pair 5. Sealing function in sreaponse to press.

PS60H NOZZLE TESTER (BOSCH TYPE)

it Is used to adjust and calibrate the injection nozzle opening pressure and to carry out leakage, spray pattern and chatter characteristic tests. For nozzle size R, S and T. In basic design with 0-40 Mpa (0-400 bar) pressure gauge. In conjunction with a specially ordered pressure gauge, this tester can also be used for testing light crude oil injection valves.

PQ400 double springs Nozzle tester

Allows to test and to calibrate diesel double springs injectors.

Equipment with a manometric gauge for internal pressure regulation

Digital display permits to calibrate the injector opening pressure

One shot and continuous spraying test

rate of oil pressure and air pressure is 50:1

PQ400 double springs Nozzle tester

Allows to test and to calibrate diesel double springs injectors.

Equipment with a manometric gauge for internal pressure regulation

Digital display permits to calibrate the injector opening pressure

One shot and continuous spraying test

rate of oil pressure and air pressure is 50:1



QCM200 Gasoline injector tester and cleaner This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide, improving stability, reliability and reducing pollution. It can perform automatic detecting, analyzing and cleaning.

Main functions It can not only diagnose and analyze the performance of the fuel

injector, but also inspect dribbling, atomization, injecting angle, distributive value, uniformity coefficient, and their on off cycle, etc of single or multiple fuel injectors.

Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free flushing to one or more fuel injectors

Automatically simulate the overall process under various pulse width and engine speed. The operation status of the fuel injectors can also be observed whether at acceleration and deceleration.

Can manually set time, pulse width and rotation speed of the fuel injector, and observe the performance under varied parameters. Ease and convenience of operation.

Can determine the shortest on-off cycle and the quality of the injector Can do oil circuit testing, and disaffiliation-free flushing to the engine

QCM300 FUEL PUMP TESTER

QCM300 FUEL PUMP TESTER is for gasline pump.

It can test the Comprehensive performance of variety of automotive electric fuel pump assembly. Such as Voltage, oil flow, oil pressure. It can be adjusted:

1. Simulation of oil pressure at various conditions of vehicle fuel pump. 2. The simulation of fuel supply at various conditions of vehicle fuel pump .



NTC Diesel Fuel Tank Cleaning Tester

NTC diesel fuel tank cleaning tester is suitable for cleaning various

models of diesel fuel tank. This product design is unique, leading

technology, simple operation, and can effectively remove impurities and

water.

Feed ( Transfer )Pump Test Bench

1. Brand new appearance design, good looking;

2. Continuous test of multiple stations, with high production efficiency;

3. High precision oil, timing device, high measurement precision;

4. Simultaneous test of different oil transfer pumps;

5. Temperature of oil is controlled automatically.



TEST BED

TURBOCHARGER BALANCE ACHINE

NT-D1

Digital controller It is used to test turbocharger rotor

NT-D2

Computer system. It is used to test turbocharger rotor



NT-D3

NT-D3 Turbocharger Balancing Machine is used for

dynamic balancing and testing of small and

medium-sized core assemblies.

SCANNER

F3-D(Heavy Duty)

It provides multi-language platform to meet different customers

demands. Products with integrated structural design, to achieve 12V,

24V power supply automatical changover. single-track working mode

and superlarge touch screen operation, exquisite look and so on,

these special designs make you feel cozy and freely. It adopts

smooth features drive technology and has good extensibility, which

not only satisfies for the modern vehicle ECU communication bus

testing, but also the vehicles appearing in the future

F3-G (world cars +heavy duty)

F3-G is the newest version of multi-functional intelligentized gasoline

and heavy duty truck diagnostic scanner universal automotive

diagnostic computer. F3-G adopts the advanced modularized design

technology which is capable of diagnosing and learning a variety of

European, United States, Asian gasoline, truck power system quickly

and easily. F3-G is the only auto diagnostic scanner that can test

both gasoline and heavy duty trucks in one machine



TURBOCHARGER

Our use of the most advanced technology and high-quality manufacturing standards run off-turbocharger.

Our products can be 25 to 196 kW (35 horsepower to 360 hp) engine matching. Given the turbocharger

high-speed rotating machinery, users should be familiar with the technical information in the related

attention, in order to ensure the reliable functioning of supercharger and the longest life. Turbocharger used

for a period of time, we propose to replace only parts of the pure components made by our factory.

Our comprehensive product range includes more than 10,000 different spare parts for the following truck,

trailer & bus. MERCEDES-BENZ, SCANIA, VOLVO, DAF & MAN HINO, MITSUBISHI, FUSO, NISSAN & ISUZU

HYUNDAI. High quality spare parts are the first choice in Chinese aftermarket for commercial vehicles. High

quality at the competitive prices.



STANDARD INJECTOR

STANDARD INJECTOR

Name ISO Standard Bosch Code Diameter(mm) Opening Pre.(Mpa) ISO7440 A14-17.2 0 681 343 009 17.2+0.3

Pintle Type ISO7440 A14-14.7 1 688 901 000 14.7+0.3 ISO7440 A44-20.7 1 688 901 015 0.4 20.7+0.3 ISO7440 A54-20.7 1 688 901 016 0.5 20.7+0.3 ISO7440 A64-20.7 1 688 901 017 0.6 20.7+0.3 ISO7440 A74-20.7 1 688 901 018 0.7 20.7+0.3 ISO7440 A84-20.7 1 688 901 019 0.8 20.7+0.3

Hole Type

ISO7440 A64-17.2 1 688 901 020 0.6 17.2+0.3 ISO7440 B64-20.7 1 688 901 101 0.6 20.7+0.3 ISO7440 B64-25.0 1 688 901 102 0.6 25.0+0.3 ISO7440 B74-20.7 1 688 901 103 0.7 20.7+0.3 ISO7440 B74-25.0 1 688 901 104 0.7 25.0+0.3 ISO7440 B84-20.7 1 688 901 105 0.8 20.7+0.3 ISO7440 B84-25.0 1 688 901 106 0.8 25.0+0.3 ISO7440 B54-20.7 1 688 901 109 0.5 20.7+0.3

Low-Inertia Hole Type

ISO7440 B54-25.0 1 688 901 110 0.5 25.0+0.3

COMMON RAIL TOOLS



No .60 Full set common rail tools USD550 No.61 Simple common rail tools USD250

No.62 Common rail injector adaptor

USD250. 18kg

No.63 Rapid Connector For Nozzle Holder(2

model:10mm,8mm):USD3/PC

No.64 Common rail oil pump assembly and

disassembly tools USD160.

No.65 Common rail Injector demolition Truck

tools USD130

No.66 CR-A Rail Pressure Tester USD240 No.67 Meter holder USD260

No.68 Grinding tools for valve assembly

(with high speed drill bench) :USD300 7kg

No.69 Leaking testing tools for valve

assembly USD240 4kg

No.70 Pump Rotating tools

(for CP1,CP3 pump) :USD200

No.71 Pump Rotating tools

(for CP2,U2 pump) :USD100

No.72 Electron microscope: USD310 No.73 Measuring tools of valve assembly

USD120

No.74 Measuring tools of shims USD60 No.75 H10 Backflow kit (for DENSO

injector):USD15

No.76 H20 Backflow kit (for caterpillar

injector):USD15



No,77 Multi-functional adaptors USD80 No,78 Multi-functional adaptors USD35 No,79 Multi-functional adaptors USD80

No,80 Bosch fuel collector USD30 NO,81 Special puller

(for BOSCH,DENSO,DELPHI pump valve)

Common Rail Spare Parts

1,BOSCH Common Rail Injector Repair Kit

2,Valve Assembly



3,High-pressure common rail injector oil adjustment shims



3,Other model

Tools for different Special purpose Pumps

Such as PQ400 Double springs Nozzle tester, PS400A NOZZLE TESTER ,Tools for PW pumps , ABZ PUMPS, VE PUMPS , P TYPE PUMPS P7100 P3000 ,TOOTHED BAR GAGUEPRE-TRAVEL GAGUEMULTI-FUNCTIONS ROTATIONAL TOOLS etc same as the pictures in our website: www.nantai-china.com

NO.01 PJ-40 NOZZLE TESTER

USD70.00/PC 18.5kg

NO.02 PS400A NOZZLE TESTER

USD50.00/PC 5.5KG

NO03 S60H Nozzle tester

USD70.00/PC 3.7KG

NO.04 (I,II,III) General Tool

USD50.00/SET

NO.05:P type pump Tools

USD35.00/SET 3.7kg

NO.06 VE pump Tool

USD35.00/SET 3.2kg



NO.07 Tooth bar Travel Tester

USD25.00/SET 0.39kg

NO.08 Tooth bar travel rulers

USD10.00/SET 0.44kgwill stop produce later

NO.09 Pre-Travel Gauge

USD25.00/PC 0.38kg

NO.10 VE pump Piston Journey tester

and VE pump Pressure tester

USD35.00/SET 0.31kg

NO.11PN, Pw, PB Tool USD35.00/SET 2.1kg

NO.12 P7 pump Tool

USD35.00/SET 2.3kg

NO.13Cummins LAMA USD20.00/PC

NO.14 MW Maintainer Tools

USD60.00/SET 0 .31*3=0.93kg

NO.15Beijing pump P7100Maintainer USD20.00/SET

NO.16 M10P7100Maintainer USD20.00/SET

NO.17 P7100 Tools

USD20.00/SET

NO.18 P7100 Tools

USD20.00/SET



NO.19P7100 Tools USDD20.00/SET 2.92kg

NO.20PE Pump Depressor USD18.00/PC 1.74kg

NO.21 VE Pump Elements

USD14.00/SET ( a little different from the real

products)( High quality , similar with Bosch)

NO.22 AO VEI Tool

USD15.00/SET ( only include the right

one)

NO.23 P7100 Tools

USD20.00/SET 2.92kg

NO.24Disassemble Benz Pump tools USD15.00/PC

(Same Products as the photo No.41)

NO.25Five-flowers Wrench USD8.00/SET ( only include one longer

and one short)

NO.26. Disassemble P9 pump Tool

USD60.00/set

(present no stock)

NO.27 Disassemble Flyweight Tool

USD25.00/SET 2.86kg

1set= 6PCs

( present no stock)

NO.28 Tear-Open Advance Device Screw USD40.00/SET

NO.29.Fuel Injection Rotating Tools

USD70.00/SET 16kg

NO.306112, 4112 LAMA USD35.00/PC



NO.31 Slide bars for disassemble

injectors USD35.00/SET

NO.32Caterpillar -Tool USD10.00/PC (same tools as NO42)

NO.33STEYR SLEEVE USD10.00/PC

NO.34 Small Stopper

USD10.00/SET

NO.35 Bosch Pump Maintainer USD48.00/SET

0.5KG/SET 1SET=6PCS

NO.36JETTA TOOL ( Three Wrench) USD8.00/PC

NO.37A Type Pump Thread USD15.00/SET

1SET=12PCS 0.1KG/6PCS

NO.38Maintainer USD20.00/SET

0.3KG/SET 1SET=6PCS EACH

NO.39 Pump Scratcher

USD15.00/PC

4.72kg/pc

NO.40Tear open P3000.P2000 P7100 Bearing Scratcher USD25.00/PC

NO.41Disassemble Benz Pump tools USD20.00/PC

NO42:Caterpillar-Tool Injection Tool

USD10.00/SET



NO.43:Caterpillar-Tool

USD10 .00

NO.44: Caterpillar-Tool

USD10.00/pc

NO.45 5M pump Socket Tools USD15.00/PC 1set=1PC

NO.46: 5M pump Tool

USD100/SET

NO.47: 6110 Tear-Tool Gear Tool

USD30.00/SET According to real tools

NO48: Caterpillar Flange

USD40.00/SET

NO.49 Spare Parts: Nozzle, Plungers,

Delivery Valve, Head Nozzle

NO. 51 PQ400 Double springs Nozzle Tester

450/PC

ULTRASONIC TANK CLEANER

Mechanical Timer and Heater Digital Timer and Heater Digital Timer and Heater

(Adjustable power)

Cleaning Application PCB, jewelry, electronic components, car parts, computer parts Laboratory instruments, clock & watches, eyeglasses, contact lens, dentures, dental instruments, medical tools, DVD & VCD, golf,



table-ware, printer inkjet, seal and comb, toothbrush, baby feeder, etc.

Company profile NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD (Taian Nantai Experimental

Equipment Co., Ltd.), located in Taian City Shandong Province P.R. China, is the leading manufacturer specializing in producing the Diesel Fuel Injection System Tester in China, is available for traditional diesel fuel injection pump test bench, PT-CUMMINS pump and injectors Test stand, VP37 test system, Bosch VP44 test system, Bosch H pump & Zexel TICS in-line electronic controller pumps test system, EUI/EUP test system, Common Rail Pump Tester , CRDI Common Rail Diesel InjectorsTest Bench, Nozzle Tester, spare parts of Pumps, and special assemble and disassemble tools of the pumps.

The Diesel Fuel Injection Pump Test bench adopts the variable-frequency and variable-speed technique, which is divided into five series-12PSB, NT2000, NT2001,NT3000NTS815 series, and there are over thirty kinds of test stands with a complete type and size, which can meet all kinds of users' demands to equipment. Common Rail Test bench mainly divided into PQ1000 P2000 CRDIs and CR2000 CR200A CRS200, etc. products which are not only can test different kinds of common rail injectors, its up to test six cylinders together, but also can test common rail pumps, Bosch CP1-k, CP1-H, CP2, CP3, Delphi, Denso, Siemens etc., advanced technology, catches the steps of international development, appropriate price, meet different customers demands. PT CUMMINS pumps and injectors series, mainly divided into PT212, PT301, PT201, PT414, PT800 five series, complete types. Its production process is advanced. Its technique has ranked the International leading level.

The company's research and development capabilities are rich and the test measure is complete, and rewards the ISO9001-2000 CERTIFICATE, CE CERTIFICATE. Taian Nantai Experimental Equipment Co., Ltd. has a strict internal management and has established a complete and reliable quality assurance system. The company's product sale network has spread all over the world. The after-sales service of product has a system of its own, which can provide the best service for users timely. The company's aim is "honest and trustworthy operation and brazing new trails in science and technology".

Nantai Catalog New

Documents

Transcript of Nantai Catalog New