NanoTron Auto
2
NanoTron Auto-Monitoring & Dosing System for Cooling Tower Water Treatment We know that open cooling tower systems offer perfect conditions for proliferation and dissemination of bacteria such as Legionella. While it is not possible to completely remove this risk without removal of the system, it is possible to manage the risk. Taking a ‘Zero Tolerance’ approach to bacteria control is particularly important for management in high profile, high risk sites. At the heart of any cooling water risk management plan is the chemical dosage system. Inter-Chemicals offer full range of dosing control equipment that can be tailored to suit all applications. Our equipment packages are classified as below: Key Components: 1.0 NanoTron Controller (Model: Nano-C-A7Y) Compact dual relay Microprocessor based controller for Cooling Tower conductivity monitoring. Standard electrodes in ¾” SCH 80 PVC female slip tees. Standard Tower Probes: TE-4A: 150psi (10.3 bar)/ 140ºF (58ºC) Max Conductivity Control: 0-5000 μS/cm scale Accuracy: +/- 1% Feed Timers (Selectable) Reminder: 1-99 days With Bleed: HH:MM limit time Post Bleed: 0-100%, HH:MM limit time Pulse: 1-9999 counts, MM:SS run time Recycle: HH:MM off cycle, MM:SS on cycle 28-Day: Weeks, Days, HH:MM run time Enclosure: Heavy duty NEMA 4X Enclosure style high impact thermoplastic ‘ taking a zero tolerance approach to bacteria control, delivers piece of mind…’
description
t
Transcript of NanoTron Auto
-
NanoTron Auto-Monitoring & Dosing System for Cooling Tower Water Treatment
We know that open cooling tower systems offer perfect conditions for proliferation and dissemination of bacteria such as Legionella.
While it is not possible to completely remove this risk without removal of the system, it is possible to manage the risk. Taking a Zero Tolerance approach to bacteria control is particularly important for management in high profile, high risk sites. At the heart of any cooling water risk management plan is the chemical dosage system.
Inter-Chemicals offer full range of dosing control equipment that can be tailored to suit all applications. Our equipment packages are classified as below:
Key Components:
1.0 NanoTron Controller (Model: Nano-C-A7Y) Compact dual relay Microprocessor based controller for Cooling Tower
conductivity monitoring. Standard electrodes in SCH 80 PVC female slip tees. Standard Tower Probes: TE-4A: 150psi (10.3 bar)/ 140F (58C) Max Conductivity Control: 0-5000 S/cm scale Accuracy: +/- 1% Feed Timers (Selectable)
Reminder: 1-99 days With Bleed: HH:MM limit time Post Bleed: 0-100%, HH:MM limit time Pulse: 1-9999 counts, MM:SS run time Recycle: HH:MM off cycle, MM:SS on cycle 28-Day: Weeks, Days, HH:MM run time
Enclosure: Heavy duty NEMA 4X Enclosure style high impact thermoplastic
taking a zero tolerance approach to bacteria control, delivers piece of mind
-
2.0 Hager Timer Switches i. 1 Channel over 7 days Timer Switch Model: EG170
o 20 program steps ii. 2 Channels over 7 days Timer Switch Model: EG203E
o 56 program steps distributed over 2 channels o supplied with 1 blank key EG 005
3.0 Flow Assembly with Injection Points iii. Burkert 2/2-way Solenoid Valve type 5281. iv. Chemical Injection socket v. Sensor holder socket vi. PVC check valve vii. Isolation ball valve viii. Sampling Ball Valve ix. PVC Y strainer
4.0 PP Board with pipe bracket Dimensions: W 4800mm x H 600 mm Fully assemble system and fixed to the board
5.0 Applications Re-circulating water systems. Cooling Tower water treatment system Auto bleed-off with conductivity control Fully automated chemical feed and biocide control
Recommended for High Risk/High Profile sites such as Hotels, hospitals, university, shopping centres, high-rise CBD buildings as well as remote locations. Recognised as industry best practice.
