Name_____________________ · Web viewa.In order to increase the yield of aspirin and to speed up...
Transcript of Name_____________________ · Web viewa.In order to increase the yield of aspirin and to speed up...
Chemistry 3: Chemical Bonding Name __________________________A. Bonding (8.1 to 8.4)
1. why bond?a. attached (bonded) state is a lower
energy stateb. complete valence shell = lower energy
state 1. metals lose valence electrons
(+ ion)2. nonmetals with 5-7 valence
electrons gain electrons to complete valence shell (– ion)
3 nonmetals shares valence e- with nonmetalsa. 1-3 valence electrons
share 1 for 1 doubling valence number
b. 4-7 valence electrons share to fill s and p orbitals (8 electrons = octet rule)
c. Lewis symbols1. chemical symbol + dots for
valence electrons2. Na•, •Mg•, etc.
d. three major types of bonds1. ionic bond: electrostatic
attraction between cations and anions2. covalent bond: shared electrons
between non-metal atoms3. metallic bond: metal atoms
collectively share valence electrons2. ionic bonding
a. metal and nonmetal: Na(s) + ½ Cl2(g) NaCl(s)
b. cations and anions: Na+(aq) + Cl-(aq) NaCl(s)
c. cation listed first in formula and name (number of ions is not indicated in name)
d. formula represents simplest ratio of ions to make a neutral compound—not a molecule
e. bond strength—energy needed to break the bond: E Q1Q2/r, where Q1 and Q2 are ion charges and r is distance between ions (lattice energy)
3. covalent bondinga. bonding atoms' orbitals overlap, which maximizes
attraction between nuclei and bonding electronsb. atoms share 2, 4 or 6 electrons
1. 2 (single), 4 (double), 6 (triple) bond2. multiple bonds reduce bond distance
a. bond distance < sum of atomic radiib. shorter bond distance = stronger bond
c. polar bond when electrons are not shared equally1. electronegativity
a. measures atom's attraction for bonding electron pair (higher # = stronger)
b. relative scale where period 2 elements are 1.0 (Li) to 4.0 (F), with 0.5 intervals1. noble gases are excluded2. trend:
a. increase across periodb. decrease down groups
2. bond polaritya. electronegativity difference between
atoms result in uneven sharing of electrons partially positive side, +, and a partial negative side, –
b. notation
c. measured as dipole moment
3. bond strength increases with polarityd. naming binary molecules
1. two types of nonmetals covalently bonded2. + atom is written first with element name 3. second element is given –ide ending4. prefix used to indicate number of atoms
a. 1—mono, 2—di, 3—tri, 4—tetra, etc.b. mono never used for first elementc. example: CO2 is carbon dioxide
5. common names: NH3 (ammonia), H2O2 (hydrogen peroxide) and H2O (water)
B. Lewis Structures (8.5 to 8.7)
1. shows the atoms in a molecule with their bonding and non-bonding electron pairsa. bonding electrons (– single, = double, triple)b. lone (non-bonding or unshared) electron pair (••)
2. drawing Lewis structures with one central atom count the total number of valence electrons
(subtract charge for ions)CO2: 4 + 2(6) = 16IF2
–: 7 + 2(7) + 1 = 22 draw a skeleton structure
o first element in formula is central, except Ho single bonds to other atoms (max. 4)
O–C–O [F–I–F]–
(ions are bracketed) place electrons around each atom
o 8 total electronso except H, Be and B or when total number of
electrons is an odd number
.. .. .. .. .. ..:O – C – O: [:F – I – F:]–
.. .. .. .. .. ..
count Lewis structure electrons (including bonding electrons)o if equal to valence electrons, stopo if valence e- < Lewis e-, add additional bonds to
reduces # of electrons by 2'so if valence e- > Lewis e-, add 2 or 4 electrons to
central atom (3rd period or higher); called expanded octet .. .. .. .... ..O = C = O [:F – I – F:]–
.. .. .. .. ..added bonds expanded octet
3. when more than one Lewis structure is possible use formal charge to decide which is more likelya. each atom is assigned its lone electrons plus half
the bonding electronsb. formal charge = valence e- – assigned e- c. preferred structure
1. atoms have formal charges closest to zero2. negative formal charge reside on the more
electronegative atom (upper right most on the periodic table)
d. example: NCS-
[:::N–CS:]- [::N=C=S::]- [:NC–S:::]-
valence e-assigned e-formal
5 4 67 4 5-2 0 +1
5 4 66 4 6-1 0 0
5 4 65 4 70 0 -1
[::N=C=S::]- is preferred because formal charges are closest to zero and negative charge is on the nitrogen (higher electronegativity)
e. technique can produce erroneous structures (experiments are required to determine actual structure)
C. VSEPR Model (9.1 to 9.3)1. rules
a. maximum separation between electron pairsb. atom positions define molecular geometryc. lone electron pairs squeeze bond angle
(actual angle < ideal angle)ElectronDomains
Domain Geometry – : Molecular
GeometryBond Angle
2 2 0 180o
3
3
2
0
1
120o
4
4
3
2
0
1
2
109.5o
5
5
4
3
2
0
1
2
3
90o
120o
6
6
5
4
0
1
2
90o
2. polar moleculesa. lone electron pairs distort symmetry except for
sp3d-linear and sp3d2-square planarb. different perimeter atomsc. polar interactions increase water solubility,
increase melting and boiling temperatures, decrease evaporation (volatility)
D. Valence-Bond Theory (9.4 to 9.5)1. explains electron domain geometries in terms of
electron orbitals2. atomic orbitals from bonding atoms merge, which
allows single electrons from each atomic orbital to occupy overlapping area and simultaneously attract both nuclei (i.e. H–H: overlap of 1s orbitals)
3. more complex molecules require a fusion of s and p orbitals into equivalent (hybrid) orbitalsa. explains why covalent bonds around an atom are
all the same even if electrons were originally in different shaped (s, p and d) atomic orbitals
b. 1 s + 1 p form 2 sp hybrids (2 electron domains)
ground state excited state hybridized state s p s p sp p
c. 1 s + 2 p form 3 sp2 hybrids (3 electron domains)
ground state excited state hybridized state s p s p sp2 p
d. 1 s + 3 p form 4 sp3 hybrids (4 electron domains)
ground state excited state hybridized state s p s p sp3
e. expanded octet hybridization1. 1 s + 3 p + 1 d = 5 sp3d hybrids (5 domains)2. 1 s + 3 p + 2 d = 6 sp3d2 hybrids (6 domains)
4. not all valence electrons enter hybrid orbitalsa. one electron pair per bond enters a hybrid orbital
1. sigma bond ()2. electrons located between bonding atoms
b. lone pairs of electrons enter hybrid orbitalc. remaining bonding pairs of electrons from multiple
bonds remain in pure p orbitals1. pi bond ()2. electrons located above/below bonding atoms
d. example: ::O=C=O::
p p sp2 p p sp2
sp2 sp sp sp2
p p sp2
sp2 p p
e. bond electrons can spread out across entire molecule (delocalized)1. NO3
- has one bond, which is shared evenly and simultaneously between 3 O's
2. multiple Lewis structures show all possible locations for bonds = resonance forms
3. bond order = sigma bond + share of bonds
(each N–O bond has bond order = 1 1/3)
E. Simple Organic Molecules—Hydrocarbons (25.1 to 25.6) 1. general properties
a. contain C and Hb. nonpolar, flammable (fuels)
2. formulas and namesa. number of carbons in parent chain1 2 3 4 5
meth eth prop but pent6 7 8 9 10
hex hept oct non decb. bond between carbons
1. alkanes (all single bonds) end in “ane”2. alkenes (1 or more double bonds)
1 double end in “ene”, 2 double end in "diene"3. alkynes (1 or more triple bonds) end in “yne”4. cyclical
a. 3 to 6 carbon ring with single bonds between carbons: prefix "cyclo"
b. 6 carbon ring with 3 shared bonds: benzene (called aromatic hydrocarbon)
c. branches1. C-branches—“yl”2. benzene branch—"phenyl"3. location of branches
a. number of the parent carbonb. lowest number possiblec. dash: # – word, comma: #, # d. number of branches (2—di, 3—tri, etc.)
3. condensed structural formulaa. hydrogens are written after the carbon b. branches are in parentheses after hydrogensc. example: 4-ethyl-2-methyl-1-hexene
CH2C(CH3)CH2CH(C2H5)CH2CH3
d. semi-condensed (shows branches and bonds) CH3 C2H5 | |
CH2=C–CH2–CH–CH2–CH3
4. functional groupsa. dramatically modify properties of hydrocarbonb. haloalkanes: halogen replaces one or more H
1. reduces reactivity (flammability)2. named as a branch with an “o” ending
c. oxygen containing groups1. hydroxyl group (C–OH)
a. water solubleb. alcohols (-ol ending)c. acids (-anoic acid ending)
2. carbonyl group (C=O)a. aldehydes (-al ending)b. ketones (-one ending)c. esters (-oate ending )
3. ethers have C–O–C (-yl -yl ether ending)4. increases polarity: C–OH > C=O > C–O–C
d. amines1. replace H in ammonia with hydrocarbon
group = amine (CH3NH2 = methylamine)2. when NH2 branches off hydrocarbon = amino
CH3CH(NH2)CH2CH3 (2-aminobutane)3. weak bases (neutralize acids—absorb H+)
5. isomerism a. structural isomers: same molecular formula,
different structure and name1. move double/triple bond position 2. move branch3. form cycloalkane from alkene
b. geometric isomers: same molecular formula and structure, but different spatial arrangement around the >C=C<, where carbons can't rotate 1. x>C=C<x : cis2. x>C=C<x : trans
Experiments
1. Isomerism Lab—Make all the isomers for the given formula using the molecular model kits and information provided. a. C5H12 Draw the structure for each isomer named.
pentane 2-methybutane 2,2-dimethylpropaneb. C4H8 Write the names for each structure drawn.
C = C – C – C
C \
C = C \
C
C C\ /C = C
C|
C = C – CC – C| |
C – C
c. C5H10 Draw the structure and name each isomer.
2. Aspirin Synthesis Lab (Wear Goggles)—Synthesize aspirin from acetic acid and salicylic acid and determine its purity.a. In order to increase the yield of aspirin and to speed up the reaction, acetic anhydride is used, which is made by removing
water from two acetic acid molecules (dehydration synthesis). Highlight the H and OH that are removed from the two acetic acid molecules.
CH3–C–OH + HO–C–CH3 CH3–C–O–C–CH3 + H2O || || || || O O O O acetic acid acetic acid acetic anhydride waterb. Aspirin is an ester that is produced by dehydration synthesis. Highlight the H and OH from the carboxyl group (-COOH)
on acetic acid and the hydroxyl group (-OH) on salicylic acid.CH3-C-OH + HO-C6H4-COOH CH3-C-O-C6H4COOH + H2O
|| || O O acetic acid salicylic acid aspirin waterAdd 2.0 g of salicylic acid, 5.0 mL of acetic anhydride and 5 drops of 85 % H3PO4 (catalyst) to a 125-ml Erlenmeyer flask. Place the flask in a 600-mL beaker half filled with 75oC water and clamp in place. Heat for 15 minutes (stir the contents occasionally with a stirring rod). Slowly add 2 ml of water to the flask to decompose any excess acetic anhydride. When the contents stop smelling like vinegar, remove the flask from the water bath and add 20 ml of water. Put the flask in an ice bath for 5 minutes to hasten crystallization and increase the yield. Collect the aspirin by filtering the cold mixture. To test the purity of the aspirin, add 0.10 g aspirin to 5 mL of 95% ethanol in a 50-mL beaker and dissolve. Add 5 mL of 0.025 M Fe(NO3)3 in 0.5 M HCl and 40 ml of distilled water and stir. Fill a cuvette with the solution and measure the absorbance of the solution at 525 nm.c. Record the absorbance.Salicylic acid forms a magenta complex with Fe3+ and the spectrophotometer measures its color intensity (absorbance). The concentration of salicylic acid, an impurity, is directly proportional to the absorbance, A, according to Beer's law (A = abc), where a (molar absorptivity) = L/mol•cm and b (cuvette path length) = 1.0 cm.d. Calculate c, the moles of salicylic acid per liter.
e. Calculate the moles of salicylic acid in 50 mL.
f. Calculate the moles of aspirin, C9H8O4, in 0.10 g.
g. Calculate the mole percent salicylic acid in the aspirin.
h. Perform the following on the chemical equation for the synthesis of aspirin below.(1) Cross out the bond on the acetic anhydride molecule that is broken during the reaction.
acetic anhydride salicylic acid aspirin acetic acid
Practice ProblemsA. Bonding
1. Consider the main group elements (1-2, 13-18).a. Record the number of valence electrons.b. Draw the Lewis dot structure for element "X" c. Record the ionic charge when forming ionic bondd. Record the total number of electrons surrounding the
atom when forming covalent bond(s)1 2 13 14 15 16 17 18
a
b X X X X X X X X
cd
2. Illustrated below are four ions—A+, B+, C- and D-—showing their relative ionic radii.
A+ B+ C– D–
What combinations of ions are impossible?
What would have the greatest lattice energy?
What would have the least lattice energy?3. The table lists the ionic radius (x 10-10 m) of common ions.
Li+ (0.68) Be2+ (0.31) O2- (1.40) F- (1.33)Na+ (0.97) Mg2+(0.66) Al3+ (0.51) S2- (1.84) Cl- (1.81)a. Use the above information to estimate the relative
lattice energy for each ionic bond. E Q1Q2/d (Q1 and Q2 = ionic charge and d (rcation + ranion)
Ionic Bond Relative Lattice Energy
LiF
MgO
NaCl
Al2S3
b. Ionic compounds melt when the temperature is high enough to break the ionic bond. Rank the above compounds in order of lowest to highest melting point.
c. What is the relative lattice energy for the strongest ionic bond formed from the ions listed in the table?
4. Use the electronegativity values to answer the questions. H 2.1Li 1.0 Be 1.5 B 2.0 C 2.5 N 3.0 O 3.5 F 4.0Na 0.9 Mg 1.2 Al 1.5 Si 1.8 P 2.1 S 2.5 Cl 3.2K 0.8 Ca 1.0 Ga 1.6 Ge 1.8 As 2.0 Se 2.4 Br 2.8
Rb 0.8 Sr 1.0 In 1.7 Sn 1.8 Sb 1.9 Te 2.1 I 2.5a. What is the range of electronegativities?
metals metalloids nonmetals
b. Rank the following bonds from most polar (1) to least polar (6). Place + next to the atom with the lower electronegativity.
N–S O–S F–S
P–S S–S Cl–S
5. Consider the following data for hydrogen halides.
H-Halide
Electronegativity difference
Dipole moment
Bond Strength(kJ/mol)
Bond Length
(Å)HF 1.9 1.82 436 0.92HCl 0.9 1.08 431 1.27HBr 0.7 0.82 366 1.41HI 0.4 0.44 299 1.61
Indicate whether the following correlate directly or inversely.
Direct Inverse
Electronegativity difference & dipole momentElectronegativity difference & bond strengthDipole moment & bond strengthBond length & bond strength
6. Consider the following data for C-C bonds.C-C bond Single Double Triple
Bond Strength (kJ/mol) 348 614 839How does bond strength correlate with the number of shared electrons?
7. Complete the chart with the formula or name of the binary molecule.
Formula NameN2O5
carbon tetrachloride
CO2
nitrogen monoxide
OF2
hydrogen bromideB. Lewis Structures
8. Record the number of covalent bonds typically formed by the main group elements.
1 2 13 14 15 16 17 18
9. In the Lewis structure shown below, A, D, E, Q, X and Z represent non-metal elements in the first two rows of the periodic table. Identify the elements.
A D E Q X Z
10. Draw the Lewis structure for the diatomic molecules.H2 N2 O2 F2
11. There are three ways to draw Lewis structures for NCO– a. Calculate the formal charge for each version
Structure [:::N–CO:]– [::N=C=O::]– [:NC–O:::]–
FormalCharge
b. Which is the preferred structure? Give two reasons.
12. Draw Lewis structures for the following molecules where the first atom listed is the central atom, unless indicated.CH4 NH3
CO2 CH2O
POCl3 (lowest formal charge)
CNO– (lowest formal charge)
SCN– (C is central atom) BCl3
SF6 BrF3
H2O (O is the central atom)
HF (F is the central atom)
SO3 N2O (lowest formal charge)
IF5 AsF5
SF4 SO2Cl2 (lowest formal charge)
RnCl2 IF4–
XeF4 NO2
C. VSEPR Model13. Make the following ideal molecules using clay and tooth
picks. Complete the table for each ideal molecule.
(–) (• •) DomainGeometry
BondAngl
e
Molecular Geometry Polar?
2 03 02 14 03 12 25 04 13 22 36 05 14 2
14. Based on the Lewis structures from question 11, determine electron domain geometry, molecular geometry, polarities and bond angle (indicate if it is less than the ideal angle "<").Molecul
e Domain Geo Molecular Geo Polarity Angle
CH4
NH3
CO2
CH2O
POCl3
CNO-
SCN-
BCl3
SF6
BrF3
H2O
HF
SO3
N2O
IF5
AsF5
SF4
SO2Cl2
RnCl2
IF4-
XeF4
NO2
D. Valence-Bond Theory15. Based on the Lewis structures from question 11, determine
the number of bonds, the number of bonds, number of lone electron pairs, hybridization around the central atom, and the bond order for the perimeter atoms.
Molecule
Bonds
BondsLone Pairs Hybridization Bond
OrderCH4
NH3
CO2
CH2OPOCl3CNO-
SCN-
BCl3SF6
BrF3
H2OHFSO3
N2OIF5
AsF5
SF4
SO2Cl2RnCl2
IF4-
XeF4
NO2
16. Label the hybridization for each carbon atom.
17. Draw the resonance structures for the following molecules.Molecule Resonance Structures
CO32-
SO2
E. Simple Organic Molecules—Hydrocarbons 18. Draw the structure formulas, including hydrogen, and
names for the first six members of the alkane series.
19. Draw semi-condensed structural formulas for the following organic compounds.
ethane benzene
1,3-pentadiene 3-ethylbutyne
diethylamine ethanoic acid (acetic acid)
2,2-dimethylpropane methylbenzene
ethanol (ethyl alcohol) 2-propanol (isopropyl alcohol)
propanone (acetone) diethyl ether (ether)
methanal (formaldehyde) methyl propanoate20. Name the following organic molecules from their semi-
condensed structural formulas.
CH3 CH3 | |CH3 – C – CH2 – CH – CH3 |
CH3|
C2H5
H2C–CH2
/ \Cl-CH CH2
HC C – CH2Cl
\ /H2C–CH2
CH3 – CH2 – C – OH || O
CH3 – O – C – CH2 – CH3 || O
F F F| | |
CH2 – CH – CH2
..CH3 – N – CH3|
CH3
C2H5|CH3 – CH2 – C – CH2 – CH3|
C2H5
CH3 CH3
\ /C = C/ \
H H
CH3 – C – CH2 – CH3 || O
HO – CH2 – CH2 – CH3 CH3 – O – C3H7
CH3 – CH2 – CH2 – CH || O
OH|
CH3 – C – CH3| OH
CH3 – CH2 – CH – CH3 | NH2
H2N – CH2 – C – OH || O
21. Draw the structures and name six isomers of C4H10O, which include 4 alcohols and 2 ethers.
Practice Multiple ChoiceBriefly explain why the answer is correct in the space provided.1. Types of hybridization exhibited by the C atoms in
propene, CH3CHCH2 include which of the following?
I. sp II. sp2 III. sp3 (A) I only (B) II only (C) III only (D) II and III
2. Which molecule contains 1 sigma () and 2 pi () bonds?(A) H2 (B) F2 (C) N2 (D) O2
3. Which molecule has the shortest bond length?(A) N2 (B) O2 (C) Cl2 (D) Br2
4. Which molecule has only one unshared pair of valence electrons?(A) Cl2 (B) NH3 (C) H2O2 (D) N2
5. The electron pairs in a molecule where the central atom exhibits sp3d2 hybrid orbitals are directed toward the corners of (A) a tetrahedron (B) a square pyramid(C) a trigonal bipyramid (D) an octahedron
6. The SbCl5 molecule has trigonal bipyramid structure. Therefore, the hybridization of Sb orbitals should be(A) sp2 (B) sp3 (C) dsp2 (D) dsp3
7. For which molecule are resonance structures necessary to describe the bonding satisfactorily?(A) H2S (B) SO2 (C) CO2 (D) OF2
8. Which molecules have planar configurations? I. BCl3 II. CHCl3 III. NCl3
(A) I only (B) II only (C) III only (D) II and III
9. CCl4, CO2, PCl3, PCl5, SF6
Which does NOT describe any of the molecules above?(A) Linear (B) Octahedral (C) Square planar (D) Tetrahedral
10. The geometry of the SO3 molecule is best described as (A) trigonal planar (B) trigonal pyramidal(C) square pyramidal (D) bent
11. Pi () bonding occurs in each of the following EXCEPT(A) CO2 (B) C2H4 (C) CN- (D) CH4
12. According to the VSEPR model, the progressive decrease in the bond angles in the series of molecules CH4, NH3, and H2O is best accounted for by the (A) increasing strength of the bonds (B) decreasing size of the central atom (C) increasing electronegativity of the central atom (D) increasing number of unshared pairs of electrons
Questions 13-15 refer to the following molecules. (A) PH3 (B) H2O (C) CH4 (D) C2H4
13. The molecule with only one double bond
14. The molecule with the largest dipole moment
15. The molecule that has trigonal pyramidal geometry
16. Which molecule has a zero dipole moment?(A) HCN (B) NH3 (C) SO2 (D) PF5
17. Which molecule has the largest dipole moment? (A) CO (B) CO2 (C) O2 (D) HF
18. Which molecule has a dipole moment of zero? (A) C6H6 (benzene) (B) NO(C) SO2 (D) NH3
19. Which pair of atoms should form the most polar bond?(A) F and B (B) C and O(C) F and O (D) N and F
20. Which pair of ions should have the highest lattice energy?(A) Na+ and Br- (B) Li+ and F-
(C) Cs+ and F- (D) Li+ and O2-
21. Which compound has the greatest lattice energy?(A) BaO (B) MgO (C) CaS (D) MgS
22. Which molecule has the weakest bond?(A) CO (B) O2 (C) Cl2 (D) N2
23. How are the bonding pairs arranged in the best Lewis structure for ozone, O3?(A) O–O–O (B) O=O–O (C) OO–O (D) O=O=O
24. Which species has the shortest bond length?(A) CN- (B) O2 (C) SO2 (D) SO3
25. Which species has a valid non-octet Lewis structure?(A) GeCl4 (B) SiF4 (C) NH4
+ (D) SeCl4
26. The Lewis structure for SeS2 with zero formal charge has (A) 2 bonding pairs and 7 nonbonding pairs of electrons.(B) 2 bonding pairs and 6 nonbonding pairs of electrons.(C) 3 bonding pairs and 6 nonbonding pairs of electrons.(D) 4 bonding pairs and 5 nonbonding pairs of electrons.
27. Which molecular shape cannot exhibit geometric isomerism?(A) tetrahedron (B) square planar(C) trigonal bipyramid (D) octahedron
28. Which molecule is NOT polar?(A) H2O (B) CO2 (C) NO2 (D) SO2
29. Which species has sp2 hybridization for the central atom?(A) C2H2 (B) SO3
2- (C) O3 (D) BrI3
30. In which species is the F-X-F bond angle the smallest? (A) NF3 (B) BF3 (C) CF4 (D) BrF3
31. For ClF3, the electron domain geometry of Cl and the molecular geometry are, respectively, (A) trigonal planar and trigonal planar. (B) trigonal planar and trigonal bipyramidal.(C) trigonal bipyramidal and trigonal planar.(D) trigonal bipyramidal and T -shaped.
32. The size of the H-N-H bond angles of the following species increases in which order? (A) NH3 < NH4
+ < NH2- (B) NH3 < NH2
- < NH4+
(C) NH2- < NH3 < NH4
+ (D) NH2- < NH4
+ < NH3
33. What is the molecular geometry and polarity of BF3?(A) trigonal pyramidal and polar(B) trigonal pyramidal and nonpolar(C) trigonal planar and polar(D) trigonal planar and nonpolar
34. Which set does not contain a linear species?(A) CO2, SO2, NO2 (B) H2O, HCN, BeI2 (C) OCN-, C2H2, OF2 (D) H2S, CIO2
-, NH2-
35. The hybrid orbitals of nitrogen in N2O4 are(A) sp (B) sp2 (C) sp3 (D) sp3d
36. How many sigma and how many pi bonds are inCH2=CH–CH2–C–CH3? ||
O (A) 5 sigma and 2 pi. (B) 8 sigma and 4 pi. (C) 11 sigma and 2 pi. (D) 13 sigma and 2 pi.
37. What is the best estimate of the H-O-H bond angle in H3O+?(A) 109.5o (B) 107o (C) 90o (D) 120o
38. Which of the following pairs of compounds are isomers? (A) CH3–CH2–CH2–CH3 and CH3–CH(CH3)–CH3 (B) CH3–CH(CH3)–CH3 and CH3–CH3–C=CH2
(C) CH3–O–CH3 and CH3–CO–CH3 (D) CH3–OH and CH3–CH2–OH
39. CH3–CH2–CH2BrWhich of the following structural formulas represents an isomer of the compound that has the structural formula represented above? (A) CH2Br–CH2–CH2 (B) CH3–CHBr–CH3
(C) CH2Br–CH2–CH2Br (D) CH3–CH2–CH2–CH2Br
Practice Free Response1. Rank the oxides in order of greatest lattice energies (1) to
least (3), without looking up any values. Explain.BaO CaO MgO
2. There are several oxides of nitrogen; among the more common are N2O, NO2 and NO3
-.a. Draw the Lewis structures of these molecules.
N2O NO2 NO3-
b. Which of these molecules "violate" the octet rule? Explain.
c. Draw resonance structures of N2O.
d. For each resonance structure from question 2c, calculate the formal charge and evaluate which structure is most likely. Explain.
e. Which side of the N–O bond is +? Explain.
f. Rank the strength of the N–O bond in order of strongest (1) to weakest (3). Explain your answer.
N2O NO2 NO3-
3. Complete the chart for SeF2, SeF4, and SeF6.SeF2 SeF4 SeF6
LewisStructure
Se- HybridizationDomain GeometryMolecular GeometryIdeal Bond AnglePolarity
4. Consider the ion SF3+.
a. Draw a Lewis structure.
b. Identify the type of hybridization exhibited by sulfur.
c. Identify the electron-domain and molecular geometries.Electron-domain
geometry Molecular geometry
d. Predict whether the F-S-F bond angle is equal to, greater than or less than 109.5°. Explain
5. Consider the ion SF5-
a. Draw a Lewis structure.
b. Identify the type of hybridization exhibited by sulfur.
c. Identify the electron-domain and molecular geometries.Electron domain geometry Molecular geometry
6. Two Lewis structures can be drawn for the OPF3 molecule.Structure 1
..: O :
.. | ..: F – P – F :
.. | ..: F :
..
Structure 2
: O :.. || ..
: F – P – F :.. | ..
: F :..
Which Lewis structures best represents a molecule of OPF3? Justify your answer in terms of formal charge.
7. a. Draw the condensed structural formula and name four structural isomers of C4H9Cl.
Formula Name
b. Draw the structural formula and name two geometric isomers of C2H2Cl2.
Formula Name
8. Compounds of Xe and F form molecules where the hybridization of Xe is sp3d and sp3d2. Write the formula and draw the Lewis structure for the two molecules.
sp3d sp3d2