Name: Dr. Hari Vasudevan Principal › Common › Uploads › ContentTemplate › 46_Down...FMCG...
Transcript of Name: Dr. Hari Vasudevan Principal › Common › Uploads › ContentTemplate › 46_Down...FMCG...
Pg. 1 of 11
Name: Dr. Hari Vasudevan
Principal
Professor and Head of the Dept. of Production Engg.
Ph.D (Indian Institute of Technology Bombay) M.E. Production Engg. (VJTI) Post-Graduate Diploma in Industrial Engg. (VJTI) B.E. Industrial Production (GIT)
Date of Birth: 29-5-1969
Qualifications: FIE: Fellow of The Institution of Engineers (India).
FISME: Fellow of The Indian Society of Manufacturing Engineers, Mumbai.
Ph.D, Indian Institute of Technology Bombay.
M.E. (Production Engg), 1st class with distinction, VJTI, Mumbai University.
Post-Graduate Diploma in Industrial Engg., 1 st class, VJTI, Mumbai University.
B.E. (Industrial Production), 1 st class, GIT, Karnatak University.
ERP (BaaN): 3 months Full Time Certificate Programme, S.P.Jain Institute of Management & Research, Mumbai under the University Synergy Programme of BaaN Institute, Netherlands.
Area of Specializations:
Manufacturing Engineering, Manufacturing Systems & Strategy, Market Orientation of Manufacturing Firms and World Class Manufacturing.
Subjects taught- Under Graduate Level:
Manufacturing Engineering, Production & Operations Management.
Post Graduate Level:
World Class Manufacturing, Manufacturing Strategy, Research Methodology.
Approved PhD Guide:
Field: Mechanical Engineering: University:- University of Mumbai. Field: Mechanical Engineering: University:- NMIMS(Deemed to be University).
PhDs Guided: 03 : Titles of the Research Work are :
1) “Exploring Product Cannibalisation and Benefits of Remanufacturing in the Context of a Remanufactured and its counterpart new product” by Dr. Ravi Terkar.
2) “Supplier Selection and Performance Evaluation Issues in Supply Chain Management” by Dr. Ashish Deshmukh.
3) “Thermal Modelling of Orthogonal Machining Process” by Dr. Rajesh Patil.
Presently guiding 8 students at the DJSCE Research Centre, University of Mumbai.
Approved PG Guide:
Field: Mechanical Engineering: University: - University of Mumbai.
PG Projects Guided:
16: M. E. (Mechanical Engineering) Projects of University of Mumbai.
Professional Memberships
Life Member of ISTE, New Delhi, Senior Member: IEDRC.
Pg. 2 of 11
Interaction with Professional Institutions
President of the Indian Society of Manufacturing Engineers (ISME);
Member of Alumni Associations of GIT, NITIE, VJTI & IIT Bombay.
Work Experience: Teaching
1. Principal, Dwarkadas J. Sanghvi College of Engineering from 9-2-2009 till date.
2. Vice-Principal, Dwarkadas J. Sanghvi College of Engineering from 17-7-2007 to 08-02-2009 and Convener, Training & Placement Cell from 1-6-2007 to 17-7-2008.
3. Professor in Production Engineering, Dwarkadas J. Sanghvi College of Engineering from 16-7-2007 till date and Head of the Department of Production Engineering from 01-07-2008 till date.
4. Assistant Professor in Production Engineering, Dwarkadas J. Sanghvi College of Engineering from 31-7-2003 to 15-7-2007 and Lecturer in Production Engineering from 17-8-1994 to 30-7-2003.
5. Lecturer, Dept. of Mechanical Engineering, S.B.M. Polytechnic from July 1993 to August 94.
6. Lecturer, Dept. of Mechanical Engineering, Fr. Agnel Polytechnic from June 1992 to July 1993.
Research and Industry:
Research Grant Received :
1. Production Engineer, Crompton Greaves Limited, Kanjur Marg, Mumbai from August, 1997 to November, 1998.
2. Trainee Engineer, PAM Pharmaceuticals and Allied Machinery Co. Ltd., Kandivali, Mumbai from June, 1997 to July, 1997.
3. Production Planning Engineer, Hercules Hoists Ltd., Mulund, Mumbai from January, 1995 to November, 1995.
4. Production Planning Engineer, Plastic Art /Shalimar Plastic Industries, Mumbai from July 1990 to June 1992.
Research grant received under the “Minor Research Grant” scheme of the University of
Mumbai :
1. Research grant of Rs. 45,000/- for the work titled “Grey Relational Analysis for
Minimising Surface Roughness of Milled NEMA GII GFRP Plates” for the A.Y. 2015-16.
2. Research grant of Rs. 30,000/- for the work titled “Multi-Objective Optimisation of
Roughness Parameters during turning of GFRP/Epoxy Composite material.” for the A.Y.
2015-16.
3. Research grant of Rs. 25,000/- for the work titled “BESTR: Buses for Enhanced State
Transport Roadmap to Urban Transport Modelling” for the A.Y. 2016-17.
International Publications:
Journal
1. “Application of Shainin DoE Tool to Explore Unknown Variables causing ‘Ghost Noise’ in 5th Gear Cycle of Transaxles during NVH Testing” in “Advances in Intelligent Systems Research”, Vol. 137, PP: 271-276, Atlantis Press (Springer), AISR (ISSN 1951-6851), ISBN (online): 978-94-6252-305-0.
2. “A Comparative Study of Taguchi Methodology and Shainin System DoE in the Optimization of Injection Moulding Process Parameters”, accepted for publication in the “Materialstoday: ELSEVIER/ScienceDirect” (with Khavekar Rajendra and Modi Bhavik).
3. “Analysis of Supplier Selection Criteria in Traditional as well as Green Supply Chain Management in Indian MSMEs” in the International Journal of Business Quantitative Economics and Applied Management Research, Volumes 3, Issue 3 (August 2016), pp.74-85, ISSN: 2349-5677 (with Ashish Deshmukh).
4. “Suspecting Dominant Variable that causes Porosity Defect in a Cast Made up of Alumnium Alloy (Lm2) Using Shainin’s DoE Approach” in the International Journal of Advances in Mechanical and Civil Engineering, Vol – 3, Issue 5, Oct 2016, ISSN : 2394-
Pg. 3 of 11
International Publications:
Journal
2827, PP : 124 -130 (with Rajendra Khavekar and Dharam Ranka). Received the best Research Paper Award during the presentation (ICMPE) in Pune on 07th of August 2016.
5. Optimization of Turning Process Parameters in the Machining of an Accumulator (MDN- 250) using “TAGHUCHI’S DESIGN OF EXPERIMENTS” in the International Journal of Mechanical and Production Engineering, Vol-3, ISS – 5, May 2015 ISSN: 2320-2092, PP:75-78 (with Shreya Kadwadkar & Dharam Ranka)
6. “Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites” in the International Journal “Procedia Engineering”, Volume 97, PP 85-94, ELSEVIER/ScienceDirect (2014) (with Naresh Deshpande and Ramesh Rajguru).
7. “Demystifying Knowledge Management in Indian Manufacturing SMEs” in the International Journal “Procedia Engineering”, Vol-97, PP:1724-1734, ELSEVIER/ScienceDirect (2014) (with Chavan Anup).
8. “Multiobjective Optimization of Drilling Characteristics for NEMA G -11 GFRP/Epoxy Composite using Desirability Coupled with Taguchi Method” in the International Journal “Procedia Engineering”, Volume 97, PP 522-530, ELSEVIER/ScienceDirect (2014) (with Naresh Deshpande and Ramesh Rajguru).
9. “Knowledge Management Practices in Indian Manufacturing MSMEs: Challenges and Opportunities” in the International Journal “Procedia Engineering”, Volume 97, PP 1784-1787, ELSEVIER/ScienceDirect (2014) (with Chavan Anup).
10. “A study on Edge Milling Operation of NEMA G11 GFRP Composites based on Grey-Taguchi method” published in the International Journal Applied Mechanics and Materials, (Volumes 592-594), pp.18-22, July 2014 - ISBN: 13: 978-3-03835-163-4 (with Ramesh Rajguru and Naresh Deshpande).
11. “Emerging Supplier Selection Criteria in the Context of Traditional Vs. Green Supply Chain Management” in the International Journal of Managing Value and Supply Chains (IJMVSC), Vol.5, No.1, March 2014, pp.19-33, ISSN: 0976-979X (with Deshmukh Ashish).
12. “Investigation of the Machinability Characteristics of GFRP/Epoxy Composites using Taguchi Methodology”, in the journal “Applied Mechanics and Materials” (Volume 612), pp.123-129, August 2014, ISSN 1662-7482 (with Deshpande Naresh and Rajguru Ramesh).
13. “Exploring the performance of a Single Cylinder Diesel Engine with alternative fuels such as CME and CME-Diesel Blends” in the International Journal of Current Engineering and Technology, ISSN 2277-4106, InPressco International Press Corporation, Vol. 3, Issue 3 (with Sandip Mane, Deshpande Naresh and Rajguru Ramesh).
14. “Desirability Fuzzy Multiple Criteria Optimization of Process Parameters in CNC Turning of GFRP/Vinyl ester Composites” in the International Journal “Procedia Materials Science” by Elsevier/ ScienceDirect, Volume: 5 (2014), pp.2458-2467 (with Deshpande Naresh and Rajguru Ramesh).
15. “Experimental Investigation and Otimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites” in the International Journal “Procedia Materials Science” by Elsevier/ ScienceDirect, Volume: 5 (2014), pp.2105-2114 (with Rajguru Ramesh and Deshpande Naresh).
16. “Exploring the Potential of Remanufacturing in Indian Industries for Sustainability and Economic Growth” in the International Journal of Business Management and Research (IJBMR)’, ISSN(P):2249-6920; ISSN(E):2249-8036. Trans Stellar Publications. Vol.4, Issue 1, pp: 25-38, February 2014 (with Kalamkar Vilas, Sunnapwar Vivek & Terkar Ravi).
17. “Validation and Installation of a Narrow belt Conveyor to Cater to High Throughput in FMCG Industries in the Indian Context” in the International Journal of Engineering Research and Development (IJERD), Vol.8, ISS.2, ISSN:2278-067X, P-ISSN:2278-800X, (August 2013), pp.39-48 (with Jobalia Binoy & Majgaonkar Vineet).
Pg. 4 of 11
International Publications:
Journal
18. “Modeling Knowledge Management Barriers in the Indian Manufacturing SMEs Using ISM Approach” in the IUP Journal of Knowledge Management, Vol XI, No.4, pp 36-52, IUP Publications, October 2013 (with Chavan Anup).
19. “Investigation of the machinability characteristics of GFRP/ Vinyl ester composite using design of experiments” in the International Journal of Machining and Machinability of Materials, Vol.15, Nos. 3/4, pp.186-200, 2014, Inderscience Publishers (with Deshpande Naresh and Rajguru Ramesh).
20. “Optimization of Injection Moulding Process Parameters in the Moulding of Low Density Polyethylene (LDPE)” in the International Journal of Engineering Research and Development (IJERD), Vol.7, ISS.5, e-ISSN: 2278-067X, p-ISSN:2278-800X, (June 2013), pp.35-39 (with Sajjankumar Lal).
21. “Enhancing Productivity through Cost and Lead Time Reduction in Remanufacturing” in the International Journal of Mechanical Engineering & Technology (IJMET), Vol.4, ISS.2, ISSN 0976-6340(P), ISSN 0976-6359(O), (March-April 2013), PP.286-297 (with Terkar Ravi and Kalamkar Vilas).
22. “Remanufacturing for Profitability and Green Growth sustainability: A Case Study of Printer Cartridge Sector in India” in the International Journal of Production Technology & Management (IJPTM), Vol.4, ISS.1, ISSN 0976-6383(P), ISSN 0976-6391(O), (January – April 2013), PP.17-30 (with Terkar Ravi and Kalamkar Vilas).
23. “Heat and Temperatures in Machining: Effects and Significance” in the International Journal: Advanced Materials Research, Vols. 622-623 (2012), pp 1550-1553 (with Patil Rajesh and Kalamkar Vilas).
24. “Importance of Closed Loop Supply Chain in the Product Recovery Processes such as Remanufacturing” in the International Journal of Engineering Research and Applications (IJERA). ISSN 2248-9622, Special Issue - March 2012, pp 121-127 (with Ravi Terkar and Vilas Kalamkar).
25. “Remanufacturing for Sustainable Development: Challenges, Elements and Benefits” in the International Journal of Innovation, Management and Technology (IJIMT), February 2012, Vol. 3(1): pp: 84- 89, ISSN: 2010-0248 (with Ravi Terkar and Vilas Kalamkar).
26. “Market Orientation and Manufacturing Performance of Indian SMEs: Moderating Role of Firm Resources and Environmental Factors” European Journal of Marketing (ISSN: 0309-0566), Emerald in sight publications, Vol.45, ISS: 7/8, PP: 1172-1193, 2011 (with S.S. Gaur and Ajai S. Gaur).
27. “Importance of Innovative Product Launching and Product Life Cycle Management in small Scale Consumer Industries” in the International Journal of Computer Applications (IJCA), Number 3 (ISBN: 978-93-80746-62-5), 2011 (with Ravi Terkar and Vivek Sunnapwar).
28. “Effect of Customer Orientation and Competitor Orientation on Small and Medium Scale Manufacturing Firm’s Performance in Turbulent Markets” in the International Journal of Entrepreneurship and Small Business (IJESB), Inderscience Publishers (with Gaur S. S.).
29. “Relational Switching Costs, Satisfaction and Commitment: A Study in the Indian Manufacturing Context” in the Asia Pacific Journal of Marketing and Logistics (APJML), Emeraldinsight Publications, 2006, Vol.18, No.04 (Oct.) (with Gaur S.S. and Shinde R. K).
International Publications:
Conference
1. “Optimization of Multi-Performance Characteristics in the Turning of GFRP(E)
Composites using Principal Component Analysis Combined with Grey Relational
Analysis” in the 7th International Conference in Materials Processing and
Characterisation (ICMPC-2017), organised by the Department of Mechanical
Engineering, GRIET, Hyderabad from 17-19 March, 2017. Paper is accepted for
publication in the ELSEVIER Materials today Proceedings (with Rajguru Ramesh,
Kalpesh Tank & Nishit Shetty).
Pg. 5 of 11
International Publications:
Conference
2. “Application of Shainin Methodology to Reduce Rejections in Spur Gear
Manufacturing “ in the International Conference in Materials, Manufacturing and
modelling (ICMMM 2017) held at VIT, Vellore during 9-11March, 2017. The paper is
accepted for publication in ELSEVIER Materials today Proceedings (with Khavekar
Rajendra and Girish Deshpande).
3. “Improvement of Gear Quality in Machining Industry using Shainin System”, in the
International Conference on Materials, Manufacturing and Design 2016, organised by
Dr. Babasaheb Ambedkar Technological University, Maharashtra on 20th & 21st
December, 2016 (with Khavekar Rajendra and Deshpande Girish).
4. “Optimization of Injection Moulding Process Parameters using Shainin System”, in the
International Conference on Materials, Manufacturing and Design 2016, organised by
Dr. Babasaheb Ambedkar Technological University, Maharashtra on 20th & 21st
December, 2016 (with Khavekar Rajendra and Modi Bhavik).
5. “Grey Fuzzy Multiple Criteria Optimization of Process Parameters for CNC Turning of
GFRP/Vinyl-Ester Composites”, in the International Conference on Materials,
Manufacturing and Design 2016, organised by Dr. Babasaheb Ambedkar Technological
University, Maharashtra on 20th & 21st December, 2016 (with Naresh Deshpande and
Ramesh Rajguru).
6. “Multiple Criteria Optimization of Process Parameters for Edge Milling of NEMA G II
Composites using Desirability Function Analysis”, in the International Conference on
Materials, Manufacturing and Design 2016, organised by Dr. Babasaheb Ambedkar
Technological University, Maharashtra on 20th & 21st December, 2016 (with Ramesh
Rajguru and Naresh Deshpande).
7. “Optimization of cutting Parameters for surface Roughness in the Machining of GFRP
composites using Grey fuzzy method in the 6th International & 27th All India
Manufacturing Technology, Design & Research Conference (AIMTDR–2016) held at
College of Engineering, Pune from 16-18 December 2016 (With Naresh Deshpande,
Ramesh Rajguru, Kalpesh and Mandar).
8. “Optimization of Material Removal Rate and Cutting Forces in Turning of GFRP
composites” in the 6th International & 27th All India Manufacturing Technology,
Design & Research Conference (AIMTDR–2016) held at College of Engineering, Pune
from 16-18 December 2016 (With Ramesh Rajguru, Kalpesh and Mandar).
9. “Strength Analysis of two Component Epoxy Adhesive Bond between Carbon Fibre AND SS302” in the 6th International & 27th All India Manufacturing Technology, Design & Research Conference (AIMTDR–2016) held at College of Engineering, Pune from 16-18 December 2016 (with Narendran, Karan, Akash and Gaurav).
10. “A review and proposed framework of the generic approach for organisational
performance measurement in Green Supply Chain Management” is published in the
International Conference on “Big Data Analytics for Optimising Supply Chains”,
organised by SPJIMR in collaboration with Production and Operations Management
Society (POMS) India Chapter on 29th-30th July, 2016 (with Gandhi Meeta).
11. “Utility Fuzzy Multicriteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” presented and published in the ICMMM2014, International Colloquium on Materials, Manufacturing and Metrology, held at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014 (with Naresh Deshpande and Ramesh Rajguru).
12. “Grey fuzzy optimization of milling parameters for G-11 GFRP/Epoxy composites with multiple performance characteristics” presented and published in the ICMMM2014, International Colloquium on Materials, Manufacturing and Metrology, held at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014 (with Ramesh Rajguru and Naresh Deshpande).
Pg. 6 of 11
International Publications:
Conference
13. “Multi Criteria Decision Making using Fuzzy Inference System: A Case in Manufacturing” in the ICCICCT 2014 conference held at Noorul Islam centre for higher education Noorul Islam university Kumaracoil, Tamilnadu, India, during July 10-11, 2014, published in the IEEE Xplore Digital Library (with Naresh Deshpande and Ramesh Rajguru ).
14. “Utility Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites” in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference - “AIMTDR 2014” organized by the Department of Mechanical Engineering, IIT Guwahati, India from December 12-14, 2014 (with Naresh Deshpande, Ramesh Rajguru, Sandip Mane).
15. “Experimental Investigation and Optimization of Milling Parameters in the Machining of NEMA G -11 GFRP Composite Material using PCD Tool” in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference - “AIMTDR 2014” organized by the Department of Mechanical Engineering, IIT Guwahati, India from December 12-14, 2014 (with Ramesh Rajguru, Naresh Deshpande, Sandip Mane).
16. “An Experimental Investigation into the Optimization of Cutting Force in CNC Turning of Woven Fabric based GFRP/Epoxy Composites using PCD Cutting Tool”, in the International Conference on Design, Manufacturing and Mechatronics (ICDMM-2014) organized by KJEI’s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Deshpande Naresh, Rajguru Ramesh).
17. “An Experimental Study on the Performance and Emission Characteristics of a Single Cylinder Diesel Engine Using CME-Diesel Blends”, in the International Conference on Renewable Energy and Sustainable Development (ICRESD-2014) organized by KJEI’s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Mane Sandeep, Deshpande Naresh and Rajguru Ramesh).
18. “Analysis of a Multi-criteria optimization problem using Taguchi and Grey relational analysis: A case study in the machining of composite materials” in the International Conference on Advances in Mechanical Engineering (ICAME), organized by the department of Mechanical Engineering, College of Engineering Pune, Maharashtra from 29th-31st May 2013 (with Ramesh Rajguru and Naresh Deshpande).
19. “Knowledge Management Barriers in Indian Manufacturing SEMs: Modeling using an Interpretive Structural Modeling Approach” in the International Conference on Business Intelligence, Analytics and Knowledge Management (BIAKM-2013) organized by IBS Hyderabad, IFHE University, Hyderabad, India from 17th to 19th April 2013 (with Chawan Anup). Received the best Research Paper Award during the Conference.
20. “Study of Cutting Force in CNC Turning of Woven Fabric based GFRP/Vinylester Composites using PCD Cutting Tool” in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013) organised by the Department of Mechanical Engineering (DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th-30th March 2013 (with Naresh Deshpande and Ramesh Rajguru).
21. “Multi-criteria optimization using Taguchi and Grey relational analysis in CNC drilling of GFRP/E composite material” in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013) organised by the Department of Mechanical Engineering(DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th-30th March 2013 (with Ramesh Rajguru and Naresh Deshpande).
22. “Recent Trends and Developments in the use of Woven Fabric Reinforcements for Composite Materials” in the International Conference on Innovations in Automation and Mechatronics Engineering 2013 (ICIAME2013), organised by G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat, India, 21-23 February 2013 (with Deshpande N.C. & Rajguru Ramesh).
23. “Remanufacturing Benefits Versus Fear of Product Cannibalization: An Analysis of Recent Trends in the Indian Context”, in the International Conference on Agile
Pg. 7 of 11
International Publications:
Conference
Manufacturing-2012 (ICAM-2012) organized by the Mechanical Engineering Department, Indian Institute of Technology- BHU, Varanasi, December 16-19, 2012 (with Terkar Ravi & Kalmkar Vilas).
24. “Decision Criterion and Methods of Supplier Selection” in the International Conference on Recent Advances In Engineering, Technology And Management: SPICON 2012, organized by the Department of Mechanical Engineering, SPCE, May 31st - June 2nd, 2012 (with Ashish Deshmukh).
25. “Importance of Remanufacturing Sector as a Secondary Market in India in view of Optimum Profit Life Cycle” in the International Conference on Recent Advances In Engineering, Technology And Management: SPICON 2012, organized by the Department of Mechanical Engineering, SPCE, May 31st - June 2nd, 2012 (with R. Terkar and V.R. Kalamkar).
26. “Need for Product Cannibalization in Small Scale Manufacturing Industries through Product Life Cycle” in the International Conference on Industrial Engineering ICIE-2011) organized by Mechanical Engg. Dept., S.V.N.I.T., Surat, during 17th - 19th November 2011 (with Ravi Terkar).
27. “Product Cannibalization due to Remanufacturing and its decisive strategies” in the International Conference on ‘Sustainable Manufacturing: Issues, Trends and Practices’ (ICSM2011) organized by Mechanical Engg. Dept., BITS Pilani, during 10th - 12th November 2011 (with Ravi Terkar and Vilas Kalamkar).
28. “Achieving Zero Defects at an Economically Affordable Cost” in the International Conference of Society of Operations Management (Nasik: Symbiosis Institute of Operations Management, Maharashtra, Dec., 2007) (with Sawan Kumar Naik).
29. “Market Orientation-Manufacturing Performance Relationship: An Empirical Study” in the International Conference-COSMAR (Bangalore: Indian Institute of Science, Karnataka, India, September, 2006).
30. “Vibration Analysis of an Assembly by Converting it into a Mass Spring System” in the International Conference on Advances in Materials Processing and Characterization (Chennai: Anna University, Tamil Nadu, India, August, 2006) (with Bhosale Ajith, Lakal Narendra and Khavekar Rajendra).
31. “Effect of Market Orientation on Manufacturing Performance of Emerging Market SMEs” in the Academy of Management Annual Meeting and Conference on Knowledge, Action and Public Concern (Atlanta: USA, Aug., 2006) (with Gaur, S. S. and Singh, D. A.).
32. “Influence of Environment, Resources and Market Orientation on Manufacturing Performance” in the American Marketing Association Annual Meeting and Summer Educator’s Conference (Chicago: USA, Aug., 2006) (with Gaur S S. and Singh, D. A.).
33. “Market Orientation-Manufacturing Performance Relationship: Role of Firm Resources and External Environment” in the Academy of International Business Annual Meeting and Conference (Beijing: China, June, 2006) (with Gaur, S S. and Singh, D. A.).
34. “Effect of Market Turbulence and Market Focus on Firm’s Performance in Small and Medium Scale Manufacturing Firms” in the International Seminar on Creating Entrepreneurship Environment and Developing Entrepreneurial Management (Mumbai: Indian Institute of Technology Bombay, India, Mar., 2006) (with Gaur, S. S.).
35. “Market Orientation and Manufacturing Outputs” in the AMS 12th Biennial World
Marketing Congress (Muenster: University of Muenster, Germany, July, 2005) (with Gaur S. S.).
36. “A Review of the Determinants of Customer Loyalty” in the AMS 12th Biennial World
Marketing Congress (Muenster: University of Muenster, Germany, July, 2005) (with Gaur S S. and Agarwal Richa).
37. “Exploring Relational Switching Cost-Commitment Link in Small and Medium
Manufacturing Firms” in the International Conference on Marketing Paradigms for
Pg. 8 of 11
International Publications:
Conference
Emerging Economies (Ahmedabad: Indian Institute of Management Ahmedabad, Gujarat, India, January, 2005) (with Gaur S. S. and Shinde R K.).
38. “Developing an Understanding of the Mid-Size Manufacturing Firms’ Buying Behavior
for ERP” in the International Conference on Indian Midsize Manufacturing Enterprises- ‘Opportunities and Challenges in a Global economy’, jointly organized by MDI Gurgaon and Confederation of Indian Industry in New Delhi (Hotel Le Meridien) from 19-20, 2004 (with Gaur S S. and Kundu Protik).
Book Chapter/ Proceedings:
1. Editor in Chief of Procedia Computer Science: ELSEVIER/ScienceDirect, Volume 45 (2015); Proceedings of International Conference on Advanced Computing Technologies and Applications (ICACTA) organised by SVKM’s DJSCE, ISSN: 1877-0509 (with Dr. Abhijit R. Joshi and Dr. Narendra Shekokar).
2. “Perfect Product Launching strategies in the Context of Survival of Small Scale, Consumer Products Industries” Dr. Hari Vasudevan, in K. Shah, V.R. Lakshmi Gorty and A. Phirke (Eds.): ICTSM 2011, CCIS 145, pp.321-326, 2011, Springer “Verlag Berlin Heidelberg 2011.
3. “Effect of Market Turbulence and Market Focus on Firm’s Performance in Small and Medium Scale Manufacturing Firms” in S. Bhargava (ed.) IIT Bombay, Entrepreneurial Management, (Sage Publications), Feb. 2008 (with Gaur S.S.).
National Publications:
Journal
1. “A Review of Machining Processes and Machinability in the case of GFRP Composite Materials” in the IPI Journal, the Official Publication of Indian Plastics Institute, Vol.18, ISS 03, August/September 2013 (with Rajguru Ramesh).
2. “Electron- Beam Curing of Polymeric Composites: An Enabling Technology for Advanced Manufacturing in the IPI Journal/Official Publication of Indian Plastic Institute, Vol.18, ISS.2, June/July 2013 (with Deshpande Naresh).
3. “Quality Improvement in the Manufacture of Air Circuit Breakers” Dr. Hari Vasudevan, TECHNOFOCUS: Journal for Budding Engineers Vol.1 (2), 2011 (with Valia Akash).
4. “Press working of Composite Sheets: A Compound Die Design Approach” Dr. Hari Vasudevan, TECHNOFOCUS: Journal for Budding Engineers Vol.1 (1), 2010 (with Phadnavis Vrushank).
5. “Understanding the Benefits and Need for Implementation of ERP in Small and Medium Manufacturing Firms” in Voice of Technology, Indian Society of Manufacturing Engineers, 2004, Combined Issues 3 and 4, July/Sep and Oct/ Dec.
6. “Information & Communication” in Voice of Technology Indian Society of Manufacturing Engineers, 2000, Issue 4, Oct/Dec.
Work Books: Two Engineering Drawing Workbooks covering the syllabus of “Engineering Drawing-I” and “Engineering Drawing -II” for Semester 1 and 2 respectively of the University of Mumbai during the academic year 1996-1997.
National Publications:
Conference
1. “Application of Knowledge Management in an Indian Automotive Industry” in the National Conference of Emerging Trends in Engineering ‘NCETE-13’ during 4th & 5th January 2013, organized by M.H.Saboo Siddik College of Engineering, Byculla, Mumbai (with Chawan Anup).
2. “Delamination in Machining of Composite Materials: A Review in the Context of Drilling Operation” in the National Conference on Emerging Trends in Engineering ‘NCETE-13’ during 4th & 5th January 2013, organized by M.H. Saboo Siddik College of Engineering, Byculla, Mumbai (with Rajguru Ramesh & Deshpande N.C.).
3. “Near Dry Machining- a minimum quantity lubrication machining” in the National conference on Advances In Mechanical Engineering & Emerging Technologies (AMEET-12),
Pg. 9 of 11
organized by the Department of Mechanical Engineering, Kamla Nehru Institute of Technology, Sultanpur form April 07-08, 2012 (with Rajesh Patil and V.R. Kalamkar).
4. “A Modified Approach in Precision Manufacturing by Abrasive Flow Machining” in the National conference on Advances in Mechanical Engineering (Hyderabad: Vasavi College of Engineering, Andra Pradesh, India, May, 2005) (with Khavekar Rajendra, Lakal Narendra and Bhosale Ajit).
5. “Achieving Competitive Excellence in Contract processing in a Manufacturing Firm” in the National Conference on World Class Manufacturing (Wardha: B. D. College of Engineering, Sevagram, Maharastra, India, March, 2004) (with Khavekar Rajendra and Lakal Narendra).
Other Experience :
1. Member of the Board of Studies in Mechanical/Production/ Automobile/Marine
Engineering of the University of Mumbai and Convener, Syllabus revision committee in Production Engineering from the year 2006.
2. Visiting Faculty at Veermata Jijabai Technological Institute (VJTI), teaching M.Tech. (Production Engg.) students the subject of Supply Chain Management during January - May2008.
3. Visiting faculty at NMIMS University’s MPSTME, teaching subjects like “World Class Manufacturing” and “Manufacturing Systems & Strategy” for the MBA (Tech) course during the academic years 2006-2007, 07-08, 08-09 & 09-10.
4. Visiting faculty at NMIMS University’s MPSTME, Shirpur (Dhule) Campus teaching subjects like “Engineering Drawing” and “Material Science” for the MBA (Tech.) and B.Tech courses during the academic years 2007-2008 & 08-09.
5. Visiting faculty at Chetana’s Ramprasad Khandelwal Institute of Management and Research, Bandra (E), Mumbai - 51 in the subject of Production Management for the academic year 1996-1997.
6. Visiting faculty at Shri Bhagubhai Mafatlal Polytechnic, Vile Parle (W), Mumbai during 1994-1996, teaching subjects such as Production Management, Work Study & Ergonomics and Engineering Drawing.
7. Mumbai University panel member for conducting group discussion and personal interview for the MMS admissions during 1996-1997 and 1997-1998 on behalf of Directorate of Technical Education, Maharashtra state.
8. Panel member at NMIMS University for conducting personal interview for the MBA (Technology) admissions during 2005-2006, 06-07, 07-08 & 08-09.
9. Visiting Faculty at SVKM’s Institute of International Studies (IIS), teaching students of
IIS and Kingston University, London for their graduate program, the subject of
“Technology and Change” during academic year 2006-2007.
Short Term Training Undergone/ Programs Attended
One day workshop under TEQIP on “Skill India” conducted by VJTI, Matunga, Mumbai
on 25th February, 2016.
Indian Engineering Deans Council : Global Summit on Engineering Education – Current
Scenario & Future Prospects organised by the Indian Society for Technical Education at
Chennai during 31st July – 1st August, 2015.
NITIE: 1. Just in Time for Indian Industries.
2. Production Management.
ISME/IIF: 1. Advances in Press Tool Design and Manufacturing.
2. Preparing Foundries for the Challenges Ahead.
3. National Seminar on Centre less Grinding.
Pg. 10 of 11
4. International Conference on Advances in Manufacturing Technology.
5. National seminar on Metrology and Inspection.
6. High Tech Manufacturing.
ISTE Trends and Advances in Machine Tools and Manufacturing.
NCQM Three Keys for Business Excellence.
IIT PAN-IIT Conferences at IIT Bombay and IIT Madras.
Programs Coordinated/ Chaired
Panel member : Discussion on “How Internet of things will be the game changer”
organised by NASSCOM jointly with L&T Technology Services & Accenture as part of the
NASSCOM COE–IOT conclave on 20th May 2016.
Session Chairman (Mechanical Engineering) in the International Conference on “Emerging Trends in Technology and its Applications” (ICETTA-2014), organized by Yadavrao Tasgaonkar College of Engineering & Management, Karjat, from 7th – 8th March 2014.
Convenor of the International Conference on Communication Technologies (ICCT 2013) organized by Dwarkadas J. Sanghvi College of Engineering during October 2013.
Member-Interactive Panel, Session titled “An Exchange between Science and Spirituality- Outer Space and Inner Space” in the SSTech 2012, ie the 2-Day National Conference on Science and Spirituality in the age of Technology held from October 05-06, 2012, organized by the University of Mumbai, India jointly with Dr. T. D. Singh’s Institute of Science and Religion at the University of Mumbai campus, Kalina, Mumbai.
Session Chairman in the International Conference on Recent Advances in Engineering, Technology and Management: SPICON 2012, organized by the Mechanical Engineering Department., SPCE from May 31st – June 2nd, 2012.
Session Chairman in the International Conference on ‘Sustainable Manufacturing: Issues, Trends and Practices’ (ICSM2011) organized by the Mechanical Engg. Dept., BITS Pilani, from 10th – 12th November 2011.
Convener, National Conference on Communication Technology (NCCT 2011) organized by Dwarkadas J. Sanghvi College of Engineering during October 2011.
Organising Secretary, International Conference on Technology Systems and Management (ICTSM) organized by Dwarkadas J. Sanghvi College of Engineering jointly with MPSTME of NMIMS (Deemed to be university) during February 2011.
Vice Chairman, Asia Pacific Regional Conference in ICTM – 2010 organized by Dwarkadas J. Sanghvi College of Engineering jointly with MPSTME of NMIMS (Deemed to be university) during March 2010.
Session Chairman (Manufacturing/Automobile/Others): National Conference on Recent Trends in Mechanical engineering (NCRTME-2010) organised by Datta Meghe College of Engineering, Airoli, Mumbai (August 2010).
Session Chairman National Conference on Advances in Mechanical Engineering (NCAME09), organized by the Mechanical Engineering department of MCT’s Rajiv Gandhi Institute of Technology of Technology, Mumbai in Association with Bhabha Atomic Research Centre, Mumbai during 15-16th January 2009.
Organizing Committee member: National Conferences on Information and Communication Technology (NCICT) organized by Dwarkadas J Sanghvi College of Engineering during the years 2007, 2008 and 2009 as well as “Faculty Development Program” and “Seminar on Engineering Education: Challenges and Perspectives” approved by Indian Society for Technical Education at DJSCE from the 2nd to 6th January,2007.
Pg. 11 of 11
Awards Received:
Coordinator: Short Term Training Program on “Computer Aided Solutions for Engineering Applications” recognized and approved by the Indian Society for Technical Education, New Delhi at DJSCE from 11th Dec’2006 to 22nd Dec 2006.
1) Received the “Social Action Award” from Indian Development foundation, a National
Level NGO during the year 2015-16. 2) Received the “Distinguished Principal” award from the CSI (Computer Society of India)
during the “TechNext India 2017”, Symbiosis of Academicians and IT Industry, held at the Victor Menezes Convention Centre (VMCC) of IIT Bombay on 15/01/2017.
---X—X—X—X—X—X—X—
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. E. Narayanan
Mentor Professor (Adhoc)
Dept. of Production Engg.
18-9-1995
Qualification with Class /
Grade
: 1. B.Sc. (Physics), March 1963, University of Kerala. Pass
Class, 46.2%.
2. B.Sc. (Engg.) in Mechanical Engineering, May 1968,
University of Kerala, Second Class, 50.6%.
3. M.E. (Mech. Engg. with Plastics Engg.) October 1984,
University of Bombay. First Class, 68.6%.
Total Experience in
Years
:
Teaching:-44 years
1. Head, Dept. of Plastics Engg., S.B. Polytechnic, from
9-7-1971 to 30-11-1993.
2. Asst. Professor of Production Engg. (Contract basis) D.J.
Sanghvi College of Engineering from 18.9.1995 to 7.4.1996.
3. Asst. Professor of Production Engineering D.J. Sanghvi
College of Engineering from 8-4-1996 to 17-10-2001.
4. Dean and Head of Dept. of Production Engg. D.J. Sanghvi
College of Engineering from 19-3-2001 to 30-4-2003.
5. Professor & Head of Department of Production Engg. from
18-10-2001 to 30-4-2003.
6. Honorary Professor & Head of Department of Production
Engg. from 2-5-2003 to 30-4-2004, 2-5-2004 to
30-4-2005, 2-5-2005 to 29-4-2006, 1-7-2006 to 30-6-2007,
1-7-2007 to 30-6-2008.
7. Mentor Professor from 11-8-2008 till date.
Industry:
1. Inspection Engineer, Q.C. Dept. with International
Computers, Indian Manufacture Ltd., Pune.
2. Head, Customer Technical Services Cell of Industrial
Machinery Division, Larsen & Toubro Ltd., Mumbai
Papers Presented in
Conferences
: National ;--
1. 1985 – Presented a paper on “Threaded Fastening with
Plastics” during the Seminar on Fasteners organized by
Institution of Production Engineers at IIT, Mumbai.
2. 1986 – Presented a paper on “Designing with Plastics”
during a workshop on Industrial Design with Plastics, jointly
organized by Indian Plastics Institute & IIT, Mumbai.
3. 1987 – “Quality parameters for plastics processing” – News
Letter of National Centre for Quality Management Vol. 4,
No. 1& 2. This paper was earlier presented in a Top
Management Level Seminar for plastics processors,
organized by Organisation of Plastics processors of India,
Mumbai.
4. 1994 – Presented paper on “Trends in Injection Moulding
Machinery” during the National Seminar on “New Horizons
in Polymers”, Coimbatore.
5. 1995 – “Processing of Engineering Plastics – Current
Scenario and Futuristic Trends” – journal of Institution of
Engineers (India) Vol.76. This paper was earlier presented
at the Ninth National Convention of Metallurgist and
Material Scientist, Mumbai.
6. Presented a paper on “Trends and Advances in Tool Design
and Tool making” during the workshop on Plastics Mould
Design organized by Indian Society of Manufacturing
Engineer.
7. 1997 – Presented a paper on “Influence of Mould Design on
Mould Design on Product Performance Quality” during the
workshop organized by Indian Institute of Packaging and
Castrol (India) Ltd., Mumbai.
8. 1997 – Presented a paper on “Failure Mode and Effect
Analysis” during the workshop on Moulding Shop
Productivity organized by Indian Plastics Institute, Mumbai.
9. 1998 – Presented a key note address on “Trends in Tooling
Sector” during the National Conference on Mould Tech’98
organised by All India Plastics Manufacturer’s Association,
Mumbai.
10. 1998 – Made a presentation on “Product Designing with
Plastics” during the workshop on Plastics Engineering
organized by Crompton Greaves Ltd., Mumbai.
11. 2004- Made presentation on Injection Moulding & Blow
Moulding during international awareness programme on
Technology Trends & Developments in Packaging
Machinery & Systems to promote technology trade at SIES
School of Packaging, Navi Mumbai.
Professional
Memberships
: Fellowship of Academic bodies & Professional Societies
1. Fellow of Indian Plastics Institute.
2. Distinguished member & Fellow of Indian Society of
Manufacturing Engineers.
Membership of Scientific & Professional Societies
1. Life member of Indian Society for Technical Education.
2. Life member of Institution of Engineers (India).
Professional involvement
1. was elected Hon. Secretary of Indian Society of
manufacturing Engineers for about 10 years.
2. was elected Managing Committee Member of Indian Plastics
Institute, Mumbai Chapter for 25 years.
3. Treasurer for 2 years, Hon. Secretary for 2 years, Vice-
Chairman for 2 years and Chairman for 2 years of Indian
Plastics Institute, Mumbai Chapter.
4. Held the office as Vice-President in the Presidential Board of
Indian Plastics Institute for two years since 2008.
5. Held the office as President in the Presidential Board of
Indian Plastics Institute for two years since 2011.
6. Rendered consultancy services to industries like Surgi Tools
Ltd., Prospect Electrical & Engg. Co., Polymoulds Ltd.,
Crompton Greaves Ltd., C.G. Lucy Ltd., CTR Ltd., Polyset
Plastics Ltd., Subir Precision Industries Pvt. Ltd., etc.
7. Has made key note address and paper presentation in various
national level seminars / conferences organized by
Professional societies.
8. Has designated & organized number of training programmes,
workshops & seminars on variety of topics like productivity
improvement, Tool Designing & Manufacture, Product
Designing, Trouble Shooting & Maintenance, Quality
Management, Manufacturing Processes etc.
9. Has rendered guidance and help to initiate and pursue
educational programme to various organizations /
institutions and other agencies like small scale industries
institute, Central Institute for Vocational Development &
Training, Bhopal, Private and Government Polytechnics,
Amruta Institute of Technology, Coimbatore , Maharashtra
Institute of Technology, Pune, Indian Institute of Packaging,
Indian Plastics Institute and so on.
10. Has rendered services as visiting faculty to undergraduate &
postgraduate courses of University of Mumbai and Pune,
Indian Institute of Packaging, Mumbai and SIES School of
Packaging, Navi Mumbai.
:
Awards
: Meritorious service award from Indian Plastics Institute for
outstanding service rendered for the cause of Industry &
Education.
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Dr. Atul D. Dhale
Associate Professor
Dept. of Production Engg.
10.04.2017
Qualifications with Class /
Grade
: (1) PhD (Mechanical Engg.) May 2016, Nagpur University
(2) M.E. (Mechanical Engg.-Design Engg), May 2006, Ist
class, 66.09%, Walchand college of Engineering, Shivaji
University, Kolhapur.
(3) B.E. (Mechanical Engg.), May 1995, Ist class, 66.54%,
Govt. College of Engg. Amravati University, Amravati
Total Experience in Years
:
Teaching: 21 years 08 Months
1. Associate Professor in Mechanical Engg., Dwarkadas J.
Sanhavi College of Engg Vile Parle., from 10-04-2017 to
till date
2. Associate Professor in Mechanical Engg., Shivajirao S.
Jondhale College of Engg Dombivli., from 01-10-2011 to
09-04-2017
3. Assistant Professor in Mechanical. Engg., Shivajirao S.
Jondhale College of Engg. Dombivli, from 01-07-2006 to
30-09-2011.
4. Lecturer in Mechanical Engineering, Shivajirao S.
Jondhale College of Engg Dombivli.. from 02-09-1995 to
30-06-2006.
Papers Published in
Journals
: International :-- 20
1. Dhale A. D.& Modak J. P. ”Design of Experimentation for
Modelling of oil Seed Presser Using HPFM”
International Journal of Agricultural Engineering.
ISSN: 0976-7223, volume 3 Issue 2 October, 2010, pp.
348-354.
2. Dhale A. D.& Modak J. P. “Design and Development of
oil seed presser by using Energy Source as Human
Powered Flywheel Motor”, International Journal of
Agriculture and Food Science Technology, ISSN: 2249-
3069, volume 2 Number 1 Jan-June 2011, pp. 63-72.
3. Dhale A. D.& Modak J. P. “Formulation of the
Experimental Data Based Model for Oil Press using
Human Powered Flywheel Motor as an Energy source”
Agricultural Engineering International, CIGR Journal,
ISSN: 1682-1130, Vol.14, No.3, Sept. 2012 pp. 218-229
4. Dhale A. D.& Modak J. P. “Formulation of Data Based
ANN Model For Human Powered Oil Press”
International Journal of Mechanical Engineering and
Technology (IJMET), Volume 4, Issue 3, May - June
2013, pp. 108-117.
5. Dhale A. D. & Atique Shaikh, “AGV Path Planning and
Obstacle Avoidance Using Dijkstra’s Algorithm”
International Journal of Application or Innovation in
Engineering & Management (IJAIEM) ISSN 2319 –
4847 Vol. 2, Issue 6, June 2013 pp. 77-83
6. Dhale A. D. & Atique Shaikh, “AGV routing using
Dijkstra’s Algorithm- A review” International Journal of
Scientific & Engineering Research, ISSN 2229-5518
Volume 4, Issue 7, July-2013 pp. 1665-1670.
7. Dhale A. D & Fahim khan, “Application of Acoustic
Emission Technique in Various Field” International
Journal of Engineering Research and Development e-
ISSN: 2278-067X, p-ISSN: 2278-800X Volume 7, Issue
10, July 2013, PP. 80-85.
8. Dhale A. D & Fahim khan, “Acoustic Emission Method
for Selection of Optimum Cutting Parameters in Turning
using Different Fluids: A Review” International Journal
of Innovative Research and Development. Vol. 2 Issue
7, July 2013
9. Dhale A. D & Fahim khan, “Optimization by Taguchi
method and In-process Monitoring of Cutting Parameters
using Acoustic Emission for EN8” International Journal
of Application or Innovation in Engineering &
Management (IJAIEM) Vol. 2 Issue 11, November 2013.
10. Dhale A. D & Fahim khan, “Optimization and In process
Monitoring of Cutting Parameters using Acoustic
Emission for Mild steel” International Journal of
Scientific and Engineering Research (IJSER) - (ISSN
2229-5518) Vol. 2 Issue 4, July 2013
11. Dhale A. D. & Kamath Swapnil, “Design, optimization
and Analysis of Connecting Rod of Vehicle Engine Using
CAE Tools”, International Academy of Science,
Engineering and Technology ISSN (online) 2319-2259,
Vol-3, Issue -4, July 2014. Impact factor (JCC)[: 3.276
12. Dhale A. D. & Et al, “Design, Analysis and optimization
of Piston and Determination of Thermal Stresses using
CAE Tools”, International Journal of Engineering
Science & Research Technology, ISSN: 2277-9655, May
2014, Impact Factor: 3.449.
13. Dhale A. D. & Et al, “Design and Development of Intake
Pulse Resonance Chamber for Four Stroke Engine”,
International Journal of Engineering Development and
Research ISSN: 2321-9939, Vol.-2, Issue-1, March 2014
14. Dhale A. D. & Et al “CFD Analysis & Simulation of Pin
Fin for Optimum Cooling of Mother Board”,
International Journal of Engineering Development and
Research ISSN: 2321-9939, Vol.-2, Issue-2, June 2014
15. Dhale A. D. & Et al, “Structural and Thermal Analysis of
Brake Disc”, International Journal of Engineering
Development and Research ISSN: 2321-9939, Vol.-2,
Issue-2, June 2014
16. Dhale A. D. Shelar S.S. & Et al, “Design and
Development of Semi –Automatic Dish Washer”,
International Journal of Engineering Research and
General Science ISSN: 2091-2730, Vol.-3, Issue-3, May-
June 2015
17. Dhale A. D. Patil N. B. & Et al, “ Formulation and
Experimental Data Based Model of Flour Mill by using
energy source as an HPFM”, International Research
Journal of Sustainable Science and Engineering, ISSN:
2347-6176, Vol.-3, Issue-4, April 2015
18. Dhale A. D. Wartha Nilesh & Et al, “Design and
Development of Reciprocating Pump using Human
Power”, International Journal of Mechanical
Engineering, ISSN: 2321-6441, Vol.-3, Issue-5, May
2015
19. Dhale A. D. Ahuja Avinash & Et al. “Design and
Development of Hovercraft”, International Journal of
Scientific Research in Science, Engineering and
Technology, Print ISSN : 2395-1990 | Online ISSN : 2394-
4099, Vol. 2, Issue 2, March-April 2016, pp 709-712.
20. Dhale A. D. ; Davkhar Neha E.; Kadam Vaibhav B.;
Nalawade Kiran A.; Shinde Prathmesh R,’ Design and
Fabrication of Coconut Tree Climbing and Harvesting
Robot; Review’, International Journal for Innovative
Research in Science & Technology, Volume 3 Issue – 9,
Feb. 2017.
Papers Published in
conferences
:
National:-- 04
1. Use of Vibration Monitoring and Analysis for Diagnosis
of Fault of Rotating Machine – Some Case Studies, at
National Conference on Sun Rising Technologies
organized by Parshwanath College of Engineering
Thane. Date 18-19 NOV. 2005
2. Design & Development of Dynamic Absorber for
Rotating Machines, at National Conference C.O.E.
Pandharpur. Date 23-24 DEC. 2005.
3. Improving Producability of new Product through
Concurrent Engineering at National Conference N.I.T.
Raurkela (Orissa). Date 15-16 Jan 2005
4. Formulation of experimental data based model for oil
press using HPFM as energy source’ XII IPRoMM
National Workshop on Industrial Problems on Machines
& Mechanisms “Challenges in Manufacturing"
(IPRoMM-2016) at VNIT, Nagpur, Date- 22 & 23 Dec.
2016.
Research Grants : 1. Minor Research Grant by University of Mumbai for
Project titled “Improvement of Low End Torque and
Fuel Efficiency of 4- Stroke Engine by using Intake
Pulse Resonance Chamber” in 2013-14
2. Minor Research Grant by University of Mumbai for
Project titled “Design and Development of Coconut Tree
Climbing and Harvesting Robot” in 2016-17.
Professional Memberships : 1.Life member of I.I.I..E. (Indian Institute of Industrial
Engineering)
2. Life member of I.S.T.E. (Indian Society of Technical Education)
3. Life Member of I.S.C.A.. (Indian Science Congress Association)
Reviewer
Guest Lecture /
Technical Talk
Workshop Organized
:
:
:
1. Reviewer for European Journal of Advances in Engineering
and Technology (EJAET)
2. Reviewer for SciencePG “International Journal of Mechanical
Engineering and Applications”.
Lectures on ‘Mechanical Vibration’ at Dr. Babasaheb Ambedkar
Technology University, Lonere,
One Week ISTE Approved Short Term Training Program at
Shivajirao S. Jondhale college of Engineering, Dombivli, on
“Research Methodology, Mathematical Modelling and
Research Based Industry Institute Interaction Activities In
Engineering & Technology” during 19th- 23rd July 2011
Name of Teaching Staff : Prof. Rajendra S. Khavekar
Designation : Training & Placement Officer
E-mail ID : [email protected]
Mobile No. : 9892168524
Date of Joining the Institution : 9.2.2000
Qualifications with Class / Grade: 1. Pursuing Ph.D. from University of Mumbai.
2. M. Tech. - NIFFT (National Institute of Foundry & Forge Technology).
3. B.E. (Indl. Prodn. Engg.), Ist class, 66.83%, September 1994, University
of Karnataka, Dharwar.
Total Experience in Years : Teaching: 17 years 3 months
1. Training & Placement Officer from 7.7.2008 till date.
2. Assistant Professor in Production Engg, Dwarkadas J. Sanghvi College
of Engg. from 1.1.2006 to 6.7.2008.
3. Lecturer in Production Engineering, Dwarkadas J. Sanghvi College of
Engineering from 9.2.2000 to 31.12.2005.
Industry: 2 years 10 months
1. Service Engineer, Vischom Engineers & Chemicals (P) Ltd., Pune
from December, 1994 to December, 1996.
2. Trainee Engineer, Amforge Industries Ltd., Mumbai from April, 1999
to February, 2000.
Research:
Papers Published : National:
International: Journal
1. “Application of Shainin DoE Tool to Explore Unknown Variables causing
‘Ghost Noise’ in 5th Gear Cycle of Transaxles during NVH Testing” in
“Advances in Intelligent Systems Research”, Vol. 137, PP: 271-276,
Atlantis Press (Springer), AISR (ISSN 1951-6851), ISBN (online): 978-94-
6252-305-0.
2. “A Comparative Study of Taguchi Methodology and Shainin System DoE
in the Optimization of Injection Moulding Process Parameters”, in Dec.-2016.
This paper accepted for publication in the “Materials today:
ELSEVIER/Science Direct” (with Dr.Hari Vasudevan and Modi Bhavik).
3. “Suspecting Dominant Variable that causes Porosity Defect in a Cast Made
up of Alumnium Alloy (Lm2) Using Shainin’s DoE Approach” in the
International Journal of Advances in Mechanical and Civil Engineering, Vol
– 3, Issue 5, Oct 2016, ISSN : 2394- 2827, PP : 124 -130 (with Dr.Hari
Vasudevan and Dharam Ranka). Received the best Research Paper Award
during the presentation (ICMPE) in Pune on 7th of August 2016.
Papers Presented in Conferences : National :
1. “Hybrid Rocket” in 2013. National conference on Role of Engineers in
Nation building (Mumbai: Viva Institute of Technology, Maharashtra,
India, March-2013) (with Dr.K N Vijayakumar and Vatsal Sheth).
2. “Anti-Lock Braking Syatem-A review” in 2013. National Conference on
Innovations in Mechanical Engineering (Lonavala: SIT, Lonavala,
Maharashtra, India, April, 2013) ( with Mehta Rujai, Sinha Sujit and Dr.K
N Vijayakumar).
3. “Stealth Technology” in 2013. National Conference on Innovations in
Mechanical Engineering (Lonavala: SIT, Lonavala, Maharashtra, India,
April, 2013) ( with Lokhandawala K, Johi Rushabh and Dr.K N
Vijayakumar).
4. “Advances in additive Manufacturing Technology-A review”in 2013.
National Conference on Innovations in Mechanical Engineering (Lonavala:
SIT, Lonavala, Maharashtra, India, April, 2013) ( with Diptesh M.,
Mahajan Shambhavi and Dr.K N Vijayakumar).
5. A Modified Approach in Precision Manufacturing by Abrasive Flow
machining in 2005, National Conference on Advances in Mechanical
Engineering (Hyderabad: Vasavi College of Engineering, Hyderabad,
Andra Pradesh, India, May 2005). (With Vasudevan Hari, Lakal Narendra
and Bhosale Ajit).
6. Achieving Competitive Excellence in Contract processing in a
Manufacturing Firm, in 2004 National Conference on World Class
Manufacturing (Wardha: B. D. College of Engineering, Sevagram, Wardha,
Maharashtra, India., March, 2004), (With Vasudevan Hari and Lakal
Narendra).
7. Effect of Silicon on GGG-40 ductile Iron in 1998, one day conference on
recent trends in manufacturing of Ductile iron (Jamshedpur: IIF Chapter,
India, Bihar).
International:
1. “Application of Shainin Methodology to Reduce Rejections in Spur Gear
Manufacturing “ in the International Conference in Materials, Manufacturing
and modelling (ICMMM 2017) held at VIT, Vellore during 9-11March, 2017.
The paper is accepted for publication in ELSEVIER Materials today
Proceedings (with Dr.Hari Vasudevan and Girish Deshpande).
2. “Design and Development of a Multi-Purpose trolley” in the
International coference on Sustainable Development in Design and
Manufacturing (ICSDDM-2017) held at Saraswati Engineering
College , Navi Mumbai on 12th and 13th January , 2017 ( with Virag
Timbadia and Dr.Vijayakumar)
3. “Review on Creativity Techniques for Product Development” in the
International coference on Sustainable Development in Design and
Manufacturing (ICSDDM-2017) held at Saraswati Engineering
College , Navi Mumbai on 12th and 13th January , 2017 ( with Virag
Timbadia
4. “Improvement of Gear Quality in Machining Industry using Shainin
System”, in the International Conference on Materials, Manufacturing and
Design 2016, organised by Dr. Babasaheb Ambedkar Technological
University, Maharashtra on 20th & 21st December, 2016 (with Dr.Hari
Vasudevan and Deshpande Girish).
5. “Optimization of Injection Moulding Process Parameters using Shainin
System”, in the International Conference on Materials, Manufacturing and
Design 2016, organised by Dr. Babasaheb Ambedkar Technological
University, Maharashtra on 20th & 21st December, 2016 (with Dr.Hari
Vasudevan and Modi Bhavik).
6. Vibration analysis of an assembly converting it into a Mass Spring system
in 2006. International Conference on 'Advances in Materials processing and
characterization (Chennai: Anna University, Tamil Nadu, India, August
2006), (with Hari Vasudevan, Narendra Lakal and Ajit Bhosle).
7. “Optimization of Machinery Techniques” in 2014.International Conference
and Workshop on Advances in Mechanical Engineering (ICWAME – 2014)
(Mumbai: Thakur College of Engineering and Technology, Maharashtra,
India, Feb.-March-2014) (with Dr. K N Vijayakumar and Sameer K.)
8. “Comparison of Quality Improvement Techniques – Shainin System vs. Six
Sigma Technique” in 2014. International Conference on Eco-Friendly
Technologies for Sustainable Growth (ICEFT-14). (Mumbai: M.H.Saboo
Siddik College of Engineering, Maharashtra, India , Feb.March-2014) (with
Dr.K.N. Vijayakumar and Vimal ).
PhD Guide? Give field & University : Field:
University:
PhDs / Projects Guided : PhDs:
Projects at Masters Level: 9 (Mechanical Engineering)
Books Published / IPRs / Patents :
Professional Memberships : Life Member ISTE.
Life Member, ISME
STTP/Workshops attended:
Consultancy Activities
Awards
Grants fetched :
Research grant received under the “Minor Research Grant” scheme of the
University of Mumbai:
1.. Research grant of Rs. 30,000/- for the work titled “Design and Development
of Multi-purpose Trolley” for the A.Y. 2016-17.
Interaction with Professional : Hon.Secretary, Indian Society of Manufacturing Engineers (ISME)
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Naresh C. Deshpande
Assistant Professor
Dept. of Production Engg.
01.07.1997
Qualifications with Class /
Grade
: (1) PhD (Mechanical Engg.) Pursuing.
(2) M.E. (Mechanical Engg.), Dec. 2013, Ist class with
distinction, 70.86%, Mumbai university.
(3) B.E. (Production Engg.), May 1994, Ist class with
distinction, 77.02%, Dr. Babasaheb Ambedkar
Marathwada University Aurangabad. 1st Rank in
University.
Total Experience in Years
: Teaching: 19 years
1. Assistant Professor in Production Engg. From 1-1-2006
till date.
2. Lecturer (Sr.Scale) in Prodn. Engg., Dwarkadas J.
Sanghvi College of Engg. from 1-4-2005 till 1-1-2006.
3. Lecturer in Production Engineering, Dwarkadas J.
Sanghvi College of Engg. from 1-7-1997 to 31-3-2005.
Industry: 10 months
1. Engineer (Production), Garware Polyester's Ltd.,
Aurangabad from 14-9-94 to 31-3-95.
2. Apprentice, Needle Roller Bearings (N.R.B.) Jalna from
September, 1995 to December, 1995.
Papers Published in
Journals
: National:-- 01
(1) “Electron-Beam Curing of Polymeric Composites: An
Enabling Technology for Advanced Manufacturing” in IPI
journal (The official publication of Indian Plastics Institute),
June/July 2013,Vol.18, issue 2.(with Dr. Hari Vasudevan)
International :-- 08
(1) “Grey Fuzzy Multiobjective Optimization of Process
Parameters for CNC Turning of GFRP/Epoxy Composites” in
Elsevier Journal “Procedia Engineering” vol. 97 (2014) pp. 85
– 94 (doi: 10.1016/j.proeng.2014.12.228) (with Dr. Hari
Vasudevan and Ramesh Rajguru)
(2) “Multiobjective Optimization of Drilling Characteristics
for NEMA G -11 GFRP/Epoxy Composite using Desirability
Coupled with Taguchi Method ” in Elsevier Journal “Procedia
Engineering” vol. 97 (2014) pp. 522 – 530 (doi:
10.1016/j.proeng.2014.12.278) (with Dr. Hari Vasudevan and
Ramesh Rajguru)
(3) “A study on Edge Milling Operation of NEMA G11 GFRP
Composites based on Grey-Taguchi method” in the
international journal Applied Mechanics and Materials -
ISSN:660-9336, (doi:10.4028/www.scientific.net/AMM.592-
594.18) Vols. 592-594 (2014) pp.18-22, (with Dr. Hari
Vasudevan and Ramesh Rajguru )
(4) “Desirability Fuzzy Multiple criteria Optimization of
Process Parameters in CNC Turning of GFRP/ Vinyl ester
Composites” in Elsevier published Journal “Procedia Material
Science” Vol. 5 (2014) pp. 2458 – 2467 (with Dr. Hari
Vasudevan and Ramesh Rajguru).
DOI: 10.1016/j.mspro.2014.07.497
(5) “Experimental Investigation and Optimization in Edge
Milling of NEMA G-11 GFRP/Epoxy Composites” presented
in Elsevier published Journal “Procedia Material Science”
Vol. 5 (2014) pp. 2105 – 2114 (with Dr. Hari Vasudevan and
Ramesh Rajguru).
DOI: 10.1016/j.mspro.2014.07.546
(6) “Investigation of the Machinability Characteristics of
GFRP/ Epoxy Composites using Taguchi Methodology” in the
international Journal of Applied Mechanics and
Materials (AMM) Vol. 612 (2014) pp 123-129, as a special
volume titled “Advanced Research in Design, Manufacturing
and Materials”. Published by Trans Tech Publications Ltd
Switzerland,(doi:10.4028/www.scientific.net/AMM.612.123)
(with Dr. Hari Vasudevan and Ramesh Rajguru ).
(7) “Investigation of the machinability characteristics of
GFRP/vinyl ester composite using design of experiments ”, in
the International Journal of Machining and Machinability of
Materials: Special issue on Machining of Advanced Materials,
Inderscience 2014, Vol.15, No.3/4, pp.186 – 200 ISSN
(Online): 1748-572X - ISSN (Print): 1748-5711. (with Dr.
Hari Vasudevan and Ramesh Rajguru )
DOI: 10.1504/IJMMM.2014.060549
(8) “Exploring the performance of a Single Cylinder Diesel
Engine with alternative fuels such as CME and CME-Diesel
Blends” in the International Journal of Current Engineering
and Technology, InPressco International Press Corporation,
Vol. 3, Issue 3, pp.1-4, ISSN 2277-4106 (with Dr. Hari
Vasudevan, Sandip Mane and Rajguru Ramesh).
Papers Published in
conferences
:
National:-- 02
(1) “Analysis of Compliant Cellular Materials for Potential
Industrial Applications” in the National Conference on
Innovation in Futuristic Materials & Manufacturing
Techniques [IFMMT-2014], during 26th and 27th December
2014, organized by Department of Mechanical Engg., School
of Engg. And Tech., Manipal University, Jaipur. (with Umang
Dadhich and Ometz Elijah)
(2)“Delamination in Machining of Composite Materials: A
Review in the Context of Drilling Operation” in the National
Conference on Emerging Trends in Engineering, NCETE-13,
during 4th & 5th January 2013, organized by M.H.Saboo
Siddik College of Engineering, Byculla, Mumbai. (with Dr.
Hari Vasudevan and Ramesh Rajguru )
International :-- 14
(1) “Grey Fuzzy Multiple Criteria Optimization of Process
Parameters for CNC turning of GFRP/Vinyl Ester
Composites”, presented at 1st International Conference on
Materials, Manufacturing and Design Engineering. (ICMMD
-2016) held at Dr. Babasaheb Ambedkar Technological
University, Lonere, Maharashtra, India, during December 20-
21, 2016. (with Dr Hari Vasudevan and Ramesh Rajguru)
(2) “Multiple Criteria Optimization of Process Parameters for
Edge Milling of NEMA G11 Composites using Desirablity
Function Analysis”, presented at 1st International Conference
on Materials, Manufacturing and Design Engineering.
(ICMMD-2016) held at Dr. Babasaheb Ambedkar
Technological Universit, Lonere, Maharashtra, India, during
December 20-21, 2016. (with Ramesh Rajguru and Dr Hari
Vasudevan)
(3) “Optimization of Cutting Parameters for Surface
Roughness in Machining of GFRP Composites”, presented at
6th International & 27th All India Manufacturing Technology,
Design and Research Conference (AIMTDR-2016) held at
College of Engineering Pune, Maharashtra India, during
December 16-18, 2016. (ISBN: 978-93-86256-27-0) (with Dr.
Hari Vasudevan, Ramesh Rajguru, Kalpesh Tank and Aman
Tukrel)
(4) “Utility Fuzzy Multiobjective Optimization of Process
Parameters for CNC Turning of GFRP/Epoxy Composites”,
presented at 5th International & 26th All India Manufacturing
Technology, Design and Research Conference (AIMTDR-
2014) held at Indian Institute of Technology Guwahati,
Assam, India during December 12-14, 2014. (ISBN: 978-8-
19274-610-4) (with Dr. Hari Vasudevan and Ramesh Rajguru)
(5)“Experimental Investigation and Optimization of Milling
Parameters in the Machining of NEMA G -11 GFRP
Composite Material using PCD Tool” , presented in the
International conference on All India Manufacturing
Technology, Design and Research (AIMTDR-2014) held at
Indian Institute of Technology Guwahati, Assam, India during
December 12-14, 2014. (ISBN: 978-8-19274-610-4) (with Dr.
Hari Vasudevan and Ramesh Rajguru)
(6)“Utility Fuzzy Multicriteria Optimization of Process
Parameters in CNC Turning of GFRP/ Vinyl ester
Composites” presented in the ICMMM2014 conference held
at Indian Institute of Technology Madras, Chennai, during
August 8-9, 2014. (ISBN 978-93-80689-18-0) (with Dr. Hari
Vasudevan and Ramesh Rajguru)
(7) “Grey fuzzy optimization of milling parameters for G-11
GFRP/Epoxy composites with multiple performance
characteristics” presented in the ICMMM2014 conference
held at Indian Institute of Technology Madras, Chennai,
during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with
Dr. Hari Vasudevan and Ramesh Rajguru )
(8)“Multi Criteria Decision Making using Fuzzy Inference
System : A Case in Manufacturing” presented in the ICCICCT
2014 conference organized by Noorul Islam centre for higher
education, Noorul Islam university, Kumaracoil, Tamilnadu,
India, from July 10-11, 2014. pp.1280 – 1286. (ISBN: 978-1-
4799-4191-9) (doi:10.1109/ICCICCT.2014.6) (IEEE Xplore)
(with Dr. Hari Vasudevan and Ramesh Rajguru )
(9)“An Experimental Investigation into the Optimization of
Cutting Force in CNC Turning of Woven Fabric based
GFRP/Epoxy Composites using PCD Cutting Tool” presented
in the International Conference on Design, Manufacturing and
Mechatronics organized by Trinity college of engineering and
research Pune, Maharashtra, from 9th – 10th Jan.2014 . (with
Dr. Hari Vasudevan and Ramesh Rajguru )
(10)“An Experimental Study on the Performance and
Emission Characteristics of a Single Cylinder Diesel Engine
Using CME-Diesel Blends”, in the International Conference
on Renewable Energy and Sustainable Development
(ICRESD-2014) organized by KJEI’s Trinity College of
Engineering and Research, Pune from 9th to 10th January
2014 (with Dr. Hari Vasudevan, S. Mane and R. Rajguru).
(11) “Analysis of a Multi-criteria optimization problem using
Taguchi and Grey relational analysis: A case study in the
machining of composite materials” in the International
Conference on Advances in Mechanical Engineering
organized by the department of Mechanical Engineering,
College of Engineering Pune, Maharashtra, from 29th-31st
May 2013 . (with Dr. Hari Vasudevan and Ramesh Rajguru)
(12)“Study of Cutting Force in CNC Turning of Woven Fabric
based GFRP/Vinylester Composites using PCD Cutting Tool”
in the International Conference on Advanced Manufacturing
and Automation (INCAMA-2013, ISBN 978-93-80686-50-9)
organised by the Department of Mechanical Engineering
(DST-FIST Sponsored) Kalasalingam University, Madurai,
Tamil Nadu from the 28th-30th March 2013 . (with Dr. Hari
Vasudevan and Ramesh Rajguru )
(13)“Multi-criteria optimization using Taguchi and Grey
relational analysis in CNC drilling of GFRP/E composite
material” in the International Conference on Advanced
Manufacturing and Automation (INCAMA-2013, ISBN 978-
93-80686-50-9) organised by the Department of Mechanical
Engineering (DST-FIST Sponsored) Kalasalingam
University, Madurai, Tamil Nadu from the 28th-30th March
2013. (with Dr. Hari Vasudevan and Ramesh Rajguru)
(14)“Recent Trends and Developments in the use of Woven
Fabric Reinforcements for Composite Materials” in the
International Conference on Innovations in Automation and
Mechatronics Engineering 2013 (ICIAME-2013,ISBN 978-
81-924744-03), organised by G.H.Patel College of
Engineering & Technology, Vallabh Vidyanagar, Gujarat,
India, 21-23 February 2013. (with Dr. Hari Vasudevan and
Ramesh Rajguru)
Research Grants : 1. Received University of Mumbai Minor Research Grant (Sr.
No. 389) of ₹ 30000 during 2015-16, for project titled
“Multi-Objective Optimization of Roughness Parameters
during Turning of GFRP/Epoxy Composite Material”.
(Along with Dr. Hari Vasudevan as co-investigator)
Professional Memberships : 1. Life member of I.S.T.E. (Indian Society of Technical
Education)
2. Life Member of I.S.M.E. (Indian Society of Manufacturing
Engineers)
Reviewer
Guest Lecture /
Technical Talk
Awards
:
:
:
1. Reviewer for Elsevier published “International Journal of
Taiwan Institute of Chemical Engineers”.
2. Reviewer for “Indian Journal of Engineering & Materials
Sciences”.
1. Delivered an Expert talk on “Low Cost Automation” at the
national seminar on Affordable Technologies for SME
sector in INDIA held on 27 th March 2015 at Lala Lajpatrai
Institute of Management, Mahalaxmi, Mumbai.
1. Recipient of ‘Best Teacher Award’ for the academic year
2008–09 from department of production engineering.
Award constituted by SVKM management, includes a
certificate of honor, and Rs. 5,000/- in cash.
Name of Teaching Staff:
Designation:
Department:
Date of Joining the institute
Dr. Sanjeev Bhagwan Thool
Assistant Professor
Mechanical Engineering
09.01.2017
Qualifications with Class / Grade:
Ph D (Thermal Engineering) in Mechanical Engineering from NIT, Raipur.
M.E (Thermal) in Mechanical Engineering from Govt. Engineering College, Raipur (Now NIT,
Raipur) with first division.
B.E. in Mechanical Engineering from Nagpur University.
Total Experience in Years
: Teaching: 14 years
July 27, 2015 –December, 31,
2016
HOD and Associate Professor, Mahatma Gandhi Missions College
of Engineering, Navi Mumbai.
July 15, 2012 – July, 25, 2015 Associate Professor, Rungta College of Engineering and Technology,
Bhilai (CG).
July 03, 2009 – Jun 01, 2012 Assistant Professor, Priyadarshini College of Engineering, Nagpur,
Maharashtra.
July 30, 2007 – April 30,
2009
Lecturer, Bapurao Deshmukh College of Engineering, Sevagram,
Wardha, Maharashtra.
Jul 18, 2003 – April 30, 2007 Lecturer, Karmavir Dadasaheb Kannamwar College of Engineering,
Nagpur, Maharastra, India.
Industry: 1 year
Research: --
Papers Published International:
[1] Thool S. B. and Sinha, S. L., 2014, Numerical study of various vertical laminar ventilation
systems for operating room in hospitals in the view of infection control, International Journal
Computer Application in Technology (InderScience Publication), (Under communication).
[2] Thool S. B. and Sinha, S. L., 2014, Numerical investigation of performance of mixing
ventilation, Research Support Society (SERSE), International Journal of Bio-Science and Bio-
Technology, Vol. 6, pp. 87-98. (ISSN No.: 2233-7649).
[3] Thool S. B. and Sinha, S. L., 2014, Modeling and Investigation of vertical laminar airflow with
perimeter air curtain ventilation system in surgical site of hospital using computational fluid
dynamics, International Journal of Scientific and Engineering Research, Vol. 5, pp. 781–788.
(ISSN No.: 2229-5518).
[4] Thool S. B. and Sinha, S. L., 2014, Simulation of room airflow using CFD and validation with
experimental results, International Journal of Engineering Science and Technology, Vol. 6,
No. 5, pp. 192–202. (ISSN No.: 2278-9510) (Impact factor: 3.14).
[5] Thool S. B. and Sinha, S. L., 2014, Investigation of performance of mixing ventilation systems
for operating room in the view of infection control, International Journal of Advancement in
Research and Technology, Vol. 3, No. 4, pp. 254–261. (ISSN No.: 2278-7764) (Impact factor:
0.4).
[6] Thool S. B. and Sinha, S. L., 2014, Computational fluid dynamics modeling and investigation
of horizontal airflow ventilation system in surgical site of hospital, IOSR Journal of
Mechanical and Civil Engineering, Vol. 11, No. 2, pp. 40–46. (DOI:
10.1142/S2047684112500340), (ANED DDL No.: 13.1864/iosr-Jmce-G011284046). (ISSN
No.: 2278-1684) (Impact factor: 3.14).
[7] Thool S. B. and Sinha, S. L., 2014, Numerical simulation and comparision of two conventional
ventilation systems of operating room in the view of contamination control, International
Journal of Computer Application, Vol. 85, No. 5, pp. 31–35. (ISSN No.: 0975-8887) (Impact
factor: 1.76).
[8] Thool S. B. and Sinha, S. L., 2014, A review of ventilation systems in the view of
contamination control in operating room, International Journal of Innovative Science,
Engineering and Technology, Vol. 1, No. 4, pp. 11–14. (Impact factor: 0.611).
[9] Matey M. S., Modak J, P. and Thool S. B., 2012, Formulation of an approximate experimental
data based model for heat transfer augmentation employing electrohydrodynamic (EHD)
technique, International Journal of Mechanics and Thermodynamics, Vol. 3, No. 2, PP. 45-56.
(ISSN No.: 2278-361X) (Impact factor: 3.14).
National: --- Papers Presented in Conferences International:
[1] Thool S. B., Under Floor Air Distribution System – An Alternative Conventional Air
Distribution System, SHAASTRARTH, RECT, Bhilai, February 8-9, 2013.
[2] Thool S. B., Undirwade S. K. and Gadge P. A., Electrical Energy for Comfort in Resiential
House Using Passive Solar System, International Conference on Innovative Science and
Engineering Technology, Rajkot, April 8-9, 2011.
National: --- PhD Guide? Give field & University
:
Field: Thermal and Fluid flow and CFD Applications
University: National Institute of Technology, Raipur
PhDs / Projects Guided
: PhDs : One ongoing
Projects at Masters level: 03
Books Published / IPRs / Patents
Professional Memberships
: Life member of Indian Society for Heating Refrigeration and Air conditioning Engineers
Consultancy Activities:
Consultation in Airflow modeling and ventilation system design for health care facility Awards: --
Grants fetched: --
Interaction with Professional Institutions: --
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Sandeep R. Vaity
Lecturer (Senior Scale)
Dept. of Production Engg.
02.01.1998
Qualifications with Class /
Grade
: 1. B.E. (Production Engg.), 1991, Ist Class, University of
Pune.
2. M.E. (Mechanical Engg.),2010, Ist Class, University of
Mumbai.
Total Experience in Years
: Teaching: 20 Years
1. Lecturer in Production Engineering on Contract basis,
Dwarkadas J. Sanghvi College of Engineering from 20-1-
1997 to 01-01-1998.
2. Lecturer in Production Engineering, Dwarkadas J. Sanghvi
College of Engineering from 02-01-1998 to 31-3-2006.
3. Lecturer (Sr. Scale) in Production Engineering, Dwarkadas
J. Sanghvi College of Engineering from 1-4-2006 till date.
Industry: 6 Years
1. Trainee Engineer, Borosil Glass Works Ltd., Mumbai from
May, 1991 to December, 1991.
2. Production Engineer, Technopride Engineering Co.,
Mumbai from December, 1991 to July, 1993.
3. Engineer (Planning & Coordination), Hydrodyne
Industries, Mumbai from July, 1993 to July, 1995.
4. Sr. Engineer (P.P.C.), Transweigh (India) Ltd., Mumbai
from August, 1995 to July, 1996.
5. Partner, Shrey Hydraulics & Pneumatics, Mumbai from
August, 1996 to December, 1996.
Papers Presented in
Conferences
: International : 2
1. Presented paper in Jan. 2009, titled “Leveraging
technology in wealth creation: Achieving competitiveness
in mergers and acquisitions in Indian industries.”
2. Presented paper in Feb. 2011, titled “Juxtaposing
industrial engineering systems of manufacturing
enterprises undertaking inorganic growth for global
competitiveness.”
Membership of
Professional Bodies:
1. Life Member of Indian Society of Technical Education.
(I.S.T.E)
2. Life Member of Indian Society of Manufacturing
Engineers. (I.S.M.E.)
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mrs. Meeta Nirav Gandhi
Lecturer
Department of Production Engineering
11.07.2007
Qualifications with Class /
Grade
: 1. Pursuing Ph. D in the area of Green Supply Chain
Management, Dwarkadas J. Sanghvi College of
Engineering, University of Mumbai.
2. M.E. (Mechanical Engineering.), 2000, Sardar Vallabhbhai
Regional College of Engineering & Technology, Surat.
3. BE Mechanical, 1996, Sardar Vallabhbhai Regional
College of Engineering & Technology, Surat.
Total Experience in Years
: Teaching:- 21years
1. Assistant Professor, D.J. Sanghvi College of Engineering.,
11-7-2007 to till date.
2. Lecturer, K.J. Somaiya College of Engineering, from July
2000 to July 2007.
3. Lecturer, Institute of Technology for women, SNDT
University from March 1999 to June 2000.
4. Lecturer, Sarvajanik College of Engineering. &
Technology, Surat from June 1997 to Feb 1999.
5. Lecturer, Sardar Valabhbhai Regional College of
Engineering. & Technology, Surat form Sept 1996 to June
1997.
Industry : --
Research :--
Papers Published
: National:--
Published a paper on “Green Supply Chain management
Practices in Automobile Industry”, in Industrial Engineering
Journal, vol IX, issue no.4, pg no 6-11, April 2016. (with Mr.
Adnan Sheikh)
International :--
Published a paper on “Application of Taguchi Grey Relational
Analysis to optimize the process parameters in wire electrical
discharge machine”, in International Journal of Innovative
Science, Engineering & Technology, Vol 3 Issue 7, July 2016
(with Mr. Vinit Raut)
Papers Presented in
Conferences
: National :1
Presented a paper on ‘Cooling Coil Design and Performance
Evaluation’ at National Conference on Advances in
Mechanical Engineering, organized by Rajiv Gandhi Institute
of Technology, Mumbai during 15- 16th January, 2009.
International : 1
Presented a paper on “Thermal Power Generation and Energy
Savings for Industrial Boilers” at 20th national and 9th
International ISHMT-ASME Heat and Mass Transfer
Conference organized by IIT Bombay on 4th January to 6th
January 2010.
One International Paper on “Phasor Analysis of double inlet
pulse Tube Crycooler” Presented at International Conference
on Cryogenic Engineering. and Cryogenic materials” July
2000 at Montreal, Canada.(with Dr. H. B. Naik and Prof. K. P.
Desai).
Presented a paper on “A review and proposed framework of
the generic approach for organizational performance
measurement in Green Supply Chain Management” in
International Conference on Big Data Analytics for
Optimizing Supply Chain organized by SPJIMR in
collaboration with India POMS Chapter on July 29- 30 2016.
(with Dr.Hari Vasudevan)
PhD Guide? Give field &
University
: Field:--
University:--
PhDs / Projects Guided
: PhDs:--
Projects at Masters level:--
Books Published / IPRs /
Patents
: --
Professional Memberships
: Life member of Indian Society of Technical Education.
Life member of Indian society of Heating
Refrigerating and Air conditioning Engineers, Mumbai
chapter.
Life member of Indian Society of Manufacturing
Engineers.
Consultancy Activities
: --
Awards
: September 2006, awarded “Excellence in Teaching” by
Student Council 2006-2007 of K.J.Somaiya College of
Engineering.
Grants fetched
: --
Interaction with
Professional Institutions
: --
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Avadhut Anant Samant.
Assistant Professor
Department of Production Engineering.
07.07.2008
Qualifications with Class /
Grade
:
1. B.E. (Production Engineering) from University of Pune,
1st Class, 64.4%, May, 1996.
2. M.E. (Production Engineering) from University of
Mumbai, 1st Class, 62.52%, August, 2003.
Total Experience in Years
: Teaching: 20 years
1. Lecturer, B.V. Polytechnic Vasai Mechanical Dept.
from16.7.1996 to 15.7.2003.
2. Sr. Lecturer, B.V. Polytechnic Vasai from 16-7-2003 to
13-7-2007.
3. Lecturer (Ad hoc), D.J. Sanghvi C.O.E. (Production Engg.
Dept.) From 16-7-2007 to 6-7-2008.
4. Lecturer, D.J. Sanghvi C.O.E. (Production Engg. Dept.)
From 7-7-2008 till date.
Industry:--
Research:--
Papers Published
: National:--
International :--
Papers Presented in
Conferences
: National :--
International :--
PhD Guide? Give field &
University
: Field:--
University:--
PhDs / Projects Guided
: PhDs:--
Projects at Masters level: --
Production Planning Control system for job industry.
Books Published / IPRs /
Patents
: --
Professional Memberships
: I.S.M.E
Consultancy Activities
: --
Awards
: --
Grants fetched
: --
Interaction with
Professional Institutions
NPTEL Online
Certification course
(Four Weeks)
:
:
--
Outcome Based Pedagogic Principles
for Effective Teaching
Exam passed on 26 March 2017 with 81%
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr Sandip H. Mane
Assistant Professor
Dept. of Production Engg.
11.07.2011
Qualifications with Class /
Grade
: 1. PhD (Mechanical Engg) (Pursuing)
2. M.Tech. (Thermal & Fluid Engg.) Ist Class with
Distinction (7.7 CGPA) from Dr. Babasaheb
Ambedkar Technology University, Lonere in
September, 2010.
3. B.E (Mechanical Engg.) Ist Class with Distinction
(70%) from Shivaji University, Kolhapur in April,
2003.
Total Experience in Years
: Teaching:- 12 years
1. Assistant Professor, Dwarkadas J. Sanghvi
College of Engg., from July, 2011 till date.
2. Assistant Professor, Bharati Vidyapeeth College
of Engg. from August 2007 to July 2011.
3. Lecturer, Saraswati College of Engineering from
July, 2004 to August, 2007.
Industry:-- 1 year
1. As Shift In-charge in Esppe Industrial Corporation
from July, 2003 to June 2004.
Papers Published
: International :--
1. An Overview of Hydrogen fuelled SI Engine“
Hydrogen fuelled SI Engine” , accepted for oral
presentation in the International journal on Global
Technology initiatives, ISSN 2277-6591, Vol.1,
Issue 1 (with Suhas uthale).
2. “Exploring the performance of a Single Cylinder
Diesel Engine with alternative fuels such as CME
and CME-Diesel Blends” in the International
Journal of Current Engineering and Technology,
ISSN 2277-4106, In Pressco International Press
Papers Presented in
Conferences
Corporation, Vol. 3, Issue 3 (with Dr. Hari
Vasudevan, Sandip Mane and Rajguru Ramesh).
3. “Heat generation and Temperature in Orthogonal
Machining” in the International Journal of
Scientific and Engineering Research, ISSN 2229-
5518, In Pressco International Press Corporation,
Vol. 3, Issue 3 (with Dr. Sanjay Kumar)
National :
: 1. Investigations of I.C. engine Using Alternative
Fuels at “Datta Meghe College of Engg. Airoli.
2. Overview of hydrogen fuelled. CI Engine at
Sinhgad College of Engg. Lonavala, Pune.
International :
(1)“Design and Analysis of Flexure bearing for linear
compressor” , accepted for oral presentation in the
International conference on Recent Advances in
Engineering, Technology and Management (SPICON-
2012) being held at Sardar Patel College of Engineering,
Mumbai, Maharashtra, India during June 1-06, 2012.
(with Suhas Uthale)
(2)“Hydrogen as a alternative fuel for SI Engine” ,
accepted for oral presentation in the International
conference on Global Technology initiatives, (ICGTI-
2012) being held at Rizvi College of Engineering,
Mumbai, Maharashtra, India during March 27-0-3, 2012.
(with Suhas Uthale )
(3) “Utility Fuzzy Multiobjective Optimization of Process
Parameters for CNC Turning of GFRP/Epoxy
Composites”, accepted for oral presentation in the
International conference on All India Manufacturing
Technology, Design and Research (AIMTDR-2014) being
held at Indian Institute of Technology Guwahati, Assam,
India during December 12-14, 2014. (with Dr. Hari
Vasudevan, N C. Deshpande and Ramesh Rajguru )
(4)“Experimental Investigation and Optimization of
Milling Parameters in the Machining of NEMA G -11
GFRP Composite Material using PCD Tool” , accepted
for oral presentation in the International conference on All
India Manufacturing Technology, Design and Research
(AIMTDR-2014) being held at Indian Institute of
Technology Guwahati, Assam, India during December
12-14, 2014. (with Dr. Hari Vasudevan, N C. Deshpande
and Ramesh Rajguru)
(5)“An Experimental Study on the Performance and
Emission Characteristics of a Single Cylinder Diesel
Engine Using CME-Diesel Blends”, in the International
Conference on Renewable Energy and Sustainable
Development (ICRESD-2014) organized by KJEI’s
Trinity College of Engineering and Research, Pune from
9th to 10th January 2014 (with Dr. Hari Vasudevan, Mane
Sandeep and Rajguru Ramesh).
(6) “Heat Generation and Temperature in Orthogonal
Machining Int. Con. and Workshop on Advances”, in
Mechanical Engineering (ICWAME 2017) Organized by
Thakur College of Engineering and Technology,
Kandivali, Mumbai, during Feb. 24 – 25, 2017 (with Dr.
Sanjay Kumar).
Professional Memberships
: - Life member of Indian Society of Technical
Education
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Mehul S. Prajapati
Assistant Professor
Dept of Production Engg.
12.07.2011
Qualifications with Class /
Grade
: 1. B.E. (Production) from University of Mumbai
with Ist Class (65.45%) in Jun, 2007.
2. M. Tech. (Production) from VJTI with Ist Class
(7.6CPI) in Jul, 2010.
Total Experience in Years
: Teaching: 7 years
1. Assistant Professor at D. J. Sanghvi College of
Engineering from 12/07/2011 till date
2. Lecturer(Adhoc), D. J. Sanghvi College of
Engineering from 10.01.2011 to 30.6.2011.
3. Lecturer, VJTI from July, 2010 to Dec, 2010.
Industry:
GET, L & T from Jun 2007 to Dec, 2007.
Papers Presented in
Conferences
: International :--
1. ‘Analysis of Pressure Relief Valve using Matlab
Simulink’ at Thirty Seventh National &Fourth
International Conference on Fluid Mechanics
and Fluid Power at IIT Madras
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mrs. Trupti Markose
Assistant Professor
Dept of Production Engg.
18.07.2011
Qualifications with Class /
Grade
: 1. B.E (Mechanical Engg.) ,Ist Class (70.29 %) from
The M.S. University of Baroda, Baroda in April,
2003.
2. M.E. (Production Engg.) , Ist Class (77.84 %)
from The M.S. University of Baroda, Baroda in
June, 2005
Total Experience in Years
: Teaching:- 12 years
1. Assistant professor D J Sanghvi college of
engineering from 18th July 2011 to till date.
2. Lecturer, Fr. Conceicao Rodrigues College of
Engg. from 6th August, 2007 to July 2011.
3. Lecturer , Charotar Institute Of Technology
Changa, Anand, Gujarat from 1st March, 2006
to 12th July, 2007.
4. Lecturer, The Maharaja Sayajirao University
of Baroda, Gujarat from 1st August, 2005 to
28th February, 2006.
Papers Presented in
Conferences
: National :--
1. Paper on “Experimental Analysis for Orifice
Type Thrust Bearing” Ref. No. ESDA2006-
95477 presented at 8th Biennial ASME
Conference of Engineering Systems Design
and Analysis (ESDA2006), organized by
Politecnico di Torino during 4 to 7th July,2006
in Turin, Italy.
2. Paper on “A two component drill
dynamometer with zero cross sensitivity”
presented at National Conference on
Mechanical Engineering (NATCON.ME-
2005), organized by Ghousia College of
Engineering, Bangalore during 11th & 12th
March, 2005.
Professional Memberships
: 1. Life member of ‘The Indian Society For
Technical Education ‘ (ISTE)
2. Life member of ‘Association For Machines &
Mechanisms’ (AMM)
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Amit A Chaudhari
Assistant Professor
Dept of Production Engg.
2.7.2012
Qualifications with Class /
Grade
: 1. PhD (Mechanical Engg) (Pursuing)
2. M.E. (Mechanical – CAD CAM) (8.42 CGP)
from Amravati University
3. B.E. (Mechanical) PRMIT&R (64.14%)
from Amravati University
Total Experience in Years
: Teaching:- 08 Years
1. Assistant professor – D J Sanghvi College of
Engineering from 2.7.2012 to till date.
2. Lecturer - Vidyavardhini’s College of
Engineering and Technology from 15th July,
2010 to 30 June 2012.
3. Lecturer – Atharva College of Engineering
from 1st August, 2009 to 30th May, 2010.
Papers Presented in
Conferences
: National :
1. Presented a paper on “Mono Composite Leaf
Spring: Modeling and analysis under static
load condition” at Vidyavardhini’s college of
Engineering and Technology Mumbai in
2011.
STTPs/ Workshops : 1. Two-days ISTE workshop on Writing
Effective Conference Papers under NME-
ICT, By MHRD; Government of India from
18th Feb. to 19th Feb., 2012.
2. Two week STTP on “Solid modeling and
Finite element analysis” at PRMIT&R,
Badnera.
3. Two week ISTE workshop on Engineering
Mechanics By MHRD.
4. One week Course on “Robotics for
Human Moment training”.
5. One day workshop on “Microsoft
Technologies”: - Saksham.
6. State level faculty development programme on
entrepreneurship programme by Sinhagad
College of engineering, Pune.
7. 15 days Train the trainer Training on SAP
MM module at SVKM.
Professional Memberships
: 1. Life member of ‘The Indian Society for
Technical Education ‘(ISTE).
Name of Teaching Staff
Designation
Department
Date of Joining the
Institution
:
:
:
:
Mr. Sanket D. Parab
Assistant Professor
Dept. of Production Engg.
05.01.2015
Qualifications with Class /
Grade
: 1. M.E (Mechanical Engineering with
specialization in CAD/CAM & Robotics),
1st Class with Distinction (9.19 CGPI),
Topper in K.J.Somaiya College of
Engineering for the academic Year’s
(2012-13) & (2013-14).
2. B.E. (Mechanical Engineering), 1st Class with
Distinction (71.56%), Shivaji University, May
2012.
Total Experience in Years
: Teaching:- 3 years
1. Assistant Professor, Dwarkadas J. Sanghvi
College of Engineering from 05-01-2015 till
date.
2. Assistant Professor, Lokmanya Tilak College
of Engineering from 11-07-2014 to 3-1-2015.
Papers Published
: International:
1. Author of Paper titled “Application
Programming ABB Industrial Robot for
Reducing Welding Cycle Time.” in
International Journal on Theoretical and
Applied Research in Mechanical Engineering.
National:-
1. Presented Paper on the topic “Programming
of Robotic cell for reducing cycle time &
improved weld quality of a Defender Safe
Product” at Recent Advances and Challenges
in Engineering and Management (RACEM-
2014) held at Vidyalankar Institute of
Technology, Mumbai, on 3rd-4th April 2014 .
Awards
: Won 1st Prize in 100 m race for faculty(held on
16/1/2015) in DJ Sanghvi College of Engg.