NAILS - metalurgia.pl Nails have been manufactured by Metalurgia since the very beginning of the...

NAILSNails have been manufactured by Metalurgia since the very beginning of the company’s existence. For years this product has been developed and improved to achieve its current form.

Common nails with round shank and flat smooth head or conical checked head

SHANK DIAMETER 0,8 - 9,0 mmLENGTH 8 - 300 mm

Application:building works, carpentry and finishing works - for joining of wooden constructions and boards.

Square Nails


Application:building works, carpentry and finishing works. Square shape of the shank provides more durable fastening in wooden constructions.

Square Twisted Nails


Application:production of pallets and wooden packaging, building works, carpentry and finishing works. Square and twisted shape of the shank provides more durable fastening compared to the square shank of nails.

2

Ring Shank Nails


Application:nailing together of wooden elements where solid connection is of the greatest importance, a.o.: production of pallets, wooden packaging and chests, nailing together of wooden fences and furniture (also garden furniture). Ring shank provides increased parameters of extracting force.

Pallet Nails (ring shank)

SHANK DIAMETER 3,8 mmLENGTH 70 and 90 mm

Application:nailing of all kinds of pallets , including EURO pallets.

Spiral Shank Nails


Application:building works, carpentry and finishing works; production of pallets and wooden packaging. Spiral shape of the shank provides more durable fastening in wooden constructions.

www.metalurgia.pl3

NAILS

Clout (Roofing) Nails with round shank


Extra Large Head Clout (Roofing) Nails


Application:fixing of soft isolating materials , including roofing as: roofing paper, asphalt belts, bituminous shingles, roof slates. There is a possibility of manufacturing of roofing nails with square and twisted shank.

Finishing (Lost Head) Nails


Application:finishing works, including: assembly of finishing and decorative slats

and assembly of wainscot. Also used to nailing small furniture details together. Most often offered galvanized in yellow.

4

Upholstering (Plasterboard) Nails with round, smooth or jagged shank and with flat, conical or lenticular head


Application:carpentry and upholstery works, including: assembly of wooden furniture and textile upholsteries of furniture.

Also offered in the form of blued, designed for dark upholstery fabrics. Blue coating constitutes anti-rust layer - prevents from rusty marks.

Depending on their shape the nail heads have also their decorative role.

Anchor (Carpentry) Nails


Application:fastening of carpentry connecting elements. Ring shank provides increased parameters of extraction force. Offered electro galvanized

Umbrella Head Nailswith round, square, square twisted or ring shank


Application:roof works - for fastening of roofing, mainly steel roofing-tile. Nails with characteristic (convex or flat) head in the form of plate of 1,2 mm in thickness and 18 or 20 mm of diameter, fastened to the nail shank.

5www.metalurgia.pl

NAILS

Corner Nails


Application:fixing of window corners

Duplex Head Nails


Application:nailing of wooden formwork. Double head makes it possible to easily disassemble the formwork.

Oval Shank Nails

SHANK DIAMETER 2,0 x 1,25 - 5,0 x 3,35 mmLENGTH 20 - 100 mm

Application:a type of finishing nails for finishing works. The specific shape of the shank prevents strong delaminating of wood.

6

Ceiling Nails with round or square shank


Application: fixing of cane materials to walls and wooden ceilings, also suspension elements e.g.: roof gutters and hanging elements, flowerbeds. These nails are most often driven in wooden beams and roof constructions, in ceilings or walls.

Hinge Nails


Application: fixing of door and window hinges.

Hardened Nailsfor electrical installations


Application: special nails for fixing (installation) of electrical cables in walls. Nails are very hard (due to

hardening process) and therefore can be driven into walls and concrete walls.

Hardened Nails lengthwise rolled with flat or conical head


Application:Special nails for fixing of various kinds of elements, including: wooden constructions, isolating materials, for walls and concrete walls, full brick or hard wood.

7www.metalurgia.pl

NAILS

Heel Nails:- smooth or ring shank- flat or one side rounded head- diamond or blade point


Application: shoe works , fixing of soles (also rubber) and heels

Heel Nailsfor heel tops

SHANK DIAMETER 3,5 mmLENGTH 20 mm

Application: shoe works, fixing of heel tops

Heel Nails for steel plates and hooves


Application: shoe works, fixing of protective steel plates to footwear and hooves.

Horseshoe Nails


Application: fixing of horseshoe heel protectors. Also used for fastening of building ferrule

8

Fence Staples of bare wire or galvanized wire


Application: Hook-type elements used for wire fixing (including barbed wires) and fixing mesh to posts, stamps, wooden frames or other wooden constructions. They may be manufactured with askew-cut point (made from galvanized wire) or diamond point (bare or galvanized).

Marker Nails

SHANK DIAMETER 6,0 mmLENGTH 52 mm

Application: railroad works, for marking (stamping) of wooden railway sleepers/ties and wooden poles. Nails with characteristic large head, on top of which a number is stroked.

Moulding Pins

Application: for strengthening parts of cores or casting forms, characteristic feature is high slenderness ratio.

9www.metalurgia.pl

Special nailsmanufactured from non-ferrous metals and stainless steel

Application: joined constructions, which are open to influence of humidity. Nails manufactured from stainless materials prevent formation of „rust” water stains on joined elements.

Stainless steel nailsin grade of steel 0H18N9 according to PN 71/H 86020 standard; 304 according to AISI

Typical types of stainless steel nails: - common nails - with smooth shank or ring shank - finishing (lost head) nails- upholstering (plasterboard) nails- clout (roofing) nails

Diameter: 1,60 - 4,00 mm

Brazen nailsin grade of material M63

Typical types of brazen nails:- upholstering (plasterboard) nails- finishing (lost head) nails

Diameter: 1,0 x 10 - 2,1 x 40 mm

Aluminium nailsin grade of material EN AW 6101

Typical types of aluminium nails:- common nails- clout (roofing) nails- finishing (lost head) nails


Copper nailsin grade of material M1E

Typical types of copper nails:- common nails- clout nails- roofing nails


10

Possibilities of finishing the surface of nails*:

- bare- electro galvanized - also in a yellow passivation (zinc thickness approx. 4 µm)- mechanical galvanized (zinc thickness approx. 40 µm)- blued

* it does not concern special nails

Packing of nails

Length of nails [mm]

0,4 kgand

0,5 kg1 kg 2,5 kg 5 kg 20 kg 25 kg 1000 kg

8 - 100 x x x x x xAccording to our technical

possibilities101 - 180 x x x x

181 - 300 x x x

We produce nails based on the following:

POLISH STANDARDS: PN-84 /M-81000BRAND STANDARDS SERIES BN / 5028

POLISH STANDARDS WITH STATUS OF EUROPEAN: PN-EN 10230-1FOREIGN STANDARDS: DIN, BS, FF, ASTM

INDIVIDUAL REQUIREMENTS OF THE CUSTOMER

There is a possibility of manufacturing nails of other types, in the assortment and of technical parameters agreed with the Customer

11www.metalurgia.pl

We have been specializing in manufacturing of wires and wire products for more than 135 years, following the trends and taking into account our customers’ suggestions. We are the leader in galvanized wire production on the Polish market. Since 2009 we have been part of TŘINECKÉ ŽELEZÁRNY- MORAVIA STEEL Group. Our strong brand and product quality appreciated by customers is the result of our special attention paid to every detail of the production process. By investing in highly qualified engineering and technical staff, we ensure a high level of after-sale, technological and marketing service. The backbone of our manufacturing base is composed of: an efficient wire rod pickling line, a modern dip wire galvanization line, wire and wire rods recrystallization and spheroidization furnace, modern drawing base and many other types of equipment for wire processing. Our products are successfully placed on numerous foreign markets. We also implement different innovation and development projects - steel wires with TRIP effect. Our manufacturing processes are compliant with the wide range of applicable industry standards, as well as individual needs of our customer.

In our broad selection of products you will also find:

bare hard wires, semi-hard wires and soft (black annealed) wiresgalvanized wiresPVC coated wires

barbed wirescopper coated wires

welding wiresbookbinding wires

nails - in one of the broadest assortment range in the worldrods

knotted wire nettingheat treatment services of wires and wire rods

surface treatment services of wires and wire rods

All products meet the requirements of the highest quality standards which is confirmed by the ISO 9001:2008 certificate

Head Office: ul. Św. Rozalii 10/12, 97-500 Radomsko, POLAND tel. +48 44 685 41 66, fax. +48 44 685 41 61, e-mail: [email protected]

Export Department: ul. Św. Rozalii 10/12, 97-500 Radomsko, POLAND tel. +48 44 685 42 17, +48 44 685 42 69, +48 44 685 42 09 fax +48 44 685 42 63

e-mail: [email protected]

www.metalurgia.pl

NAILS - metalurgia.pl Nails have been manufactured by Metalurgia since the very beginning of the...

Documents

Transcript of NAILS - metalurgia.pl Nails have been manufactured by Metalurgia since the very beginning of the...