N & T ENGITECH PRIVATE LIMITED - N&T | Manufacturer and ...
1
Validity of this Certificate can be verified at www.ukcert.co.uk Date of Registration : 13 August 2020 1st Surveillance Due : 12 2021 2nd Surveillance Due : 12 2022 Recertification Due : 12 2023 (subject to the company maintaining its system to the required standard) August August August We hereby declare that the technical file of product complied with the requirement of the 2009/127/EC Machinery Directive. Certificate No.: Manufacturer: Name : N & T ENGITECH PRIVATE LIMITED Address : SHOP NO 315 316 317 3RD FLOOR, DIAMOND COMPLEX, SH 41 INDUSTRIAL AREA AT CHHAPI TAL VADGAM, CHHAPI, BANASKANTHA, GUJARAT-385210, INDIA Product : EDIBLEOIL REFINERY, SOLVENT EXTRACTION PLANT, PALM FRACTIONAL, LAUNDRY SOAP PLANT, LECITHIN PLANT, SEED CRUSHING UNIT, ACIDOIL PLANT, TANK YARD, WAREHOUSE AND EPC (ENGINEERING, PROCUREMENT AND CONSTRUCTION) WORK The Certification body has performed an audit of the above product quality system covering the design, manufacture and final inspection of the certified products. The quality system has been assessed, approved and is subject to continuous surveillance according to the . This certificate is issued under the following conditions: 1. It applies only to the quality system maintained in the manufacture of above referenced models and it does not substitute the design or type-examination procedures, if requested. 2. The certificate remains valid until the manufacturing conditions or the quality systems are not changed. 3. The certificate validity is conditioned by positive results or surveillance audits. 4. After fulfilling the relevant EU legislation of directive, the manufacturer shall affix to each device, of the referenced models. 5. The CE mark as shown above can be used, under the responsibility of the manufacturer, after completion of an EC Declaration of conformity and compliance with all relevant EC Directives. The statement is based on a single evaluation of one sample of above mentioned products. It does not imply an assessment of the whole production. 8951 2009/127/EC Machinery Directive
Transcript of N & T ENGITECH PRIVATE LIMITED - N&T | Manufacturer and ...
Validity of this Certificate can be verified at www.ukcert.co.ukDate of Registration : 13 August 20201st Surveillance Due : 12 20212nd Surveillance Due : 12 2022Recertification Due : 12 2023(subject to the company maintaining its system to the required standard)
August August August
We hereby declare that the technical file of product complied with the requirement of the 2009/127/EC Machinery Directive.
Certificate No.: Manufacturer:Name : N & T ENGITECH PRIVATE LIMITEDAddress : SHOP NO 315 316 317 3RD FLOOR, DIAMOND COMPLEX, SH 41 INDUSTRIAL AREA AT CHHAPI TAL VADGAM, CHHAPI, BANASKANTHA, GUJARAT-385210, INDIA
Product : EDIBLEOIL REFINERY, SOLVENT EXTRACTION PLANT, PALM FRACTIONAL, LAUNDRY SOAP PLANT, LECITHIN PLANT, SEED CRUSHING UNIT, ACIDOIL PLANT, TANK YARD, WAREHOUSE AND EPC (ENGINEERING, PROCUREMENT AND CONSTRUCTION) WORK
The Certification body has performed an audit of the above product quality system covering the design, manufacture and final inspection of the certified products. The quality system has been assessed, approved and is subject to continuous surveillance according to the
.This certificate is issued under the following conditions: 1. It applies only to the quality system maintained in the manufacture of above referenced
models and it does not substitute the design or type-examination procedures, if requested. 2. The certificate remains valid until the manufacturing conditions or the quality systems are not changed. 3. The certificate validity is conditioned by positive results or surveillance audits. 4. After fulfilling the relevant EU legislation of directive, the manufacturer shall affix to each device, of the referenced models. 5. The CE mark as shown above can be used, under the responsibility of the manufacturer, after completion of an EC Declaration of conformity and compliance with all relevant EC Directives. The statement is based on a single evaluation of one sample of above mentioned products. It does not imply an assessment of the whole production.
8951
2009/127/EC Machinery Directive
