MX847570A SmartStudio MX847503A SmartStudio Manager · PDF fileMX847570A SmartStudio MX847503A...

Product Brochure

Signalling TesterMD8475AMX847570A SmartStudioMX847503A SmartStudio Manager

2 Product Brochure l MD8475A

Product Brochure l MD8475A 3

x-15 y-20



All-in-One Support for LTE and Other Communications Technologies

Scenario-less Smartphone Tests using SmartStudio

Verifying Existing Smartphone Functions using SmartStudio Manager

All the world's main communications technologies, including triple-system LTEW-CDMA/ GSM mobiles and TD-LTE/TD-SCDMA/GSM as well as LTE/CDMA2000 hybrids, can be tested using the all-in-one MD8475A (requires installation of optional units and software for each standard).

Unlike earlier base station simulators requiring time-consuming creation of complex scenarios, the MD8475A SmartStudio interactive user interface eliminates the need to create scenarios, smoothing UE testing.

Smartphone development requires verification of existing functions. Testing of items that have already been tested many times over, such as voice tests and SMS sending/receiving, are automated using SmartStudio Manager to improve development efficiency.

See page 8 for details

See page 20 for details

Smartphones are becoming increasingly multifunctional as the worldwide mobile market expands and diversifies. As a result, mobile developers developing new hardware and services require increasing numbers of tests, such as maximum throughput, VoLTE, fallback and handover. As an example, battery tests must now not only include standby consumption, but also measurements while web browsing, video streaming, etc. Anritsu's MD8475A is the ideal cost-effective tool for these complex multiple tests and evaluations.


Supports Versatile Smartphone Tests

Complex tests of multifunction smartphones are supported by the all-in-one MD8475A with interactive SmartStudio interface.


Applications

Flexible Base Station SettingsBase station settings are essential for testing UE connections. Not only does SmartStudio support frequency band and Tx and Rx power settings, it can also be set to behave exactly as a base station.

Cell Parameter Settings

Up to 32 base station parameters can be saved in one file to prevent setting errors and assure fast, smooth testing when making slight changes to frequency and bandwidth before retesting.

Base Station Power Setting

The Tx/Rx power of the base station can be changed during testing to simulate Out-of-Service tests by stopping RF on Smartstudio.

Setting Base Station Parameters

Cell1

Cell2

Cell3

Cell1

Cell2

Cell3

Cell1

Cell2

Cell3

Cell1

Cell2

Cell3

Cell1

Cell2

Cell3

Setting Neighbor Cells

Neighbor cells can be set to display the mix of multiple cells for a UE graphically.


Configuring 2-cell Test EnvironmentPerforming tests between smartphone systems (handover tests) usually requires set-up of several measuring instruments and creation of complex scenarios. SmartStudio eliminates these problems by providing a simple test environment for fast and efficient testing.

Multi System Configuration

One MD8475A supports up to two RF tests and SmartStudio simplifies settings for multi-system environments.

Roaming and Power Consumption tests require multiple cells. Up to four base stations can be tested using two connected MD8475A units* to simulate an actual network environment as realistically as possible.*: With limitations on combination

Multi-cell Tests

Tests of mobiles moving between cells take the Selection, Redirection, Handover, and other conditions into consideration, depending on the terminal and base station conditions. SmartStudio can register these terminal and base station conditions, including the RF power, as a test case, making it quick and easy to reproduce terminal evaluations and faults. Test cases are also useful for general terminal evaluations when reproducing Handover failures.

2-cell Testing Support by SmartStudioBTS1

BTS2 LTE-FDD TD-LTE W-CDMA GSM CDMA2000 TD-SCDMA

LTE-FDD TD-LTE W-CDMA GSM CDMA2000 TD-SCDMA

SelectionReselectionRedirection

Measurement*PS Handover


Data Packet CommunicationsData packet communication environments are complex, but SmartStudio makes it easy to resolve troublesome packet bottlenecks, shortening evaluation times.

Popular Server Environment

Because the MD8475A runs Windows 7, commercial application servers can be easily installed.

Status Evaluation

A full line of function tools can be used to check communication status, including throughput, ACK/NACK counts, and RF monitoring. Simultaneous checking of multiple layers allows quick troubleshooting during data communications.

BrowsingWAP/HTTP

StreamingContents

Download DRM SyncMLE-Mail

Voice Call Video Call Packet Call SMS MMS SMS-CB

RF Monitor*Displays TRx power for frequency and channels

Throughput Monitor*Checks data communications each layer for base station

Counter*Displays detailed information, including ACK/NACK and MCS

*: Not supported for CDMA2000.

3G/2G Voice Calling Test Just making voice settings using SmartStudio is all that is necessary for voice loopback tests with the MD8475A. And voice calls can be checked by connecting a handset to the MD8475A.

Loopback

MD8475A

RF

Testing Voice Calls from LTE to 3G/2GA variety of technologies are used when a mobile moves between systems from an LTE to 3G/2G cell. Configuring a 2-cell test environment using SmartStudio supports LTE and 2G/3G system voice call tests such as CS Fallback and SV-LTE (Simultaneous Voice and LTE).

LTE: Communications by PSReceive call by CS and notify UE of incoming call via LTE from 2G/3G systemConnect voice call by CS

*: Not supported for LTE/CDMA2000.


Voice over LTE Tests Since LTE uses the data network, Voice over LTE (VoLTE) communications also use the data network; SmartStudio simplifies VoLTE tests.

Loopback Test of VoLTE/Video

The SmartStudio CSCF function supports VoLTE tests (AMR/W-AMR Codec, etc.) in the loopback mode.In addition to an IMS server, VoLTE tests require a variety of LTE settings about Multi PDN. Not only does SmartStudio support multi-PDN*1, but it it also supports packet filter and QoS settings.

End-to-End Tests of VoLTE

Voice over LTE can be tested between two LTE mobiles in bothdirections using two MD8475A units to benchmark and evaluatecalls between actual mobiles.

CSCF (SIP) Server

MD8475A

RF Interface

U-Plane Data(IP/Ethernet)

VoLTE Client

Packet Service

Sets RoHC*2 and TFT filter at Default Bearer and Dedicated Bearer

*1: GSM and TD-SCDMA are not supported.*2: RoHC settings require the MX847550A-060 option.

The RTP/VDP/IP (0x0001) and UDP/IP RoHC (0x0002) profiles are supported.

UE-to-UE Case

CSCF (SIP) Server

MD8475A

RF Interface

U-Plane Data(IP/Ethernet)

VoLTE Client

MD8475A

RF Interface U-Plane Data(IP/Ethernet)

VoLTE Client

Hub


IMS Service TestSmartStudio has a built-in standard server environment for running IMS server functions for easy service tests, including VoLTE, SMS over IMS, etc.

SIP Registration of a Non-IMS UE SIP Registration of an IMS UE

Typical Connection Procedure1. PS Attach: Connect to Data server.

→ Get address using DNS, etc.2. SIP Regist:

→ Depends on application. ⇒ PDN uses one operation.

Typical Connection Procedure1. IMS Attach: Connect to CSCF server using SIP.

→ CSCF Server connects continuously.2. Packet Communication: Connect to Data server via IMS Core.

→ Data communications after SIP registration completed.⇒ Consequently, two or more PDN required.

Standard IMS Server Function

CSCF (Call Session Control Function)Supports standard server function for VoLTE and SMS over IMS tests as well as voice data loopback function. IPsec is supported too.

DHCPv6 (Dynamic Host Configuration Protocol v6)Allocates IPv6 address and notifies DNS/SIP server address to network node.

DNS (Domain Name Server)Operates as DNS cache server.

NDP (Neighbor Discovery Protocol)Supports function to transmit RA (Router Advertisement) and regularly transmit RA to RS (Router Solicitation).

NTP (Network Time Protocol)The UE and MD8475A times are synchronized by sending time data in response to an NTP request.

PSAP (Public Safety Answering Point)The UA (User Agent) and voice data loopback function support PSAP simulation for running PIMS Emergency tests.

XCAP (XML Configuration Access Protocol)This function supports updating, referencing, and deleting of XML format file data (XCAP documents).

Ping Send Function

The Ping function is used to verify the connection of the device under test to the network before SIP Registration.

SMS over IMS Setting

Smartphone can register with CSCF server, and can transmit and receive SMS over IMS.


IMS OptionsMX847570A-080 Extended CSCF Option

Various conditions can be set for VoLTE/Video quasi-normal and abnormal tests. Moreover, VoLTE call and hang-up sequences can both be confirmed from SmartStudio. In addition, VoLTE/Video audio codec switchover tests are supported as well.

MX847570A-081 IMS Supplementary Service Option

This option adds functions for simulating VoLTE/Video caller ID, call transfer and call hold. Various CSCF and XCAP service settings as well as supplementary service functions can be set.

Virtual UA Calling/ReleaseVoLTE calling from the SmartStudio simulated terminal (Virtual UA) is supported. In addition, any Virtual UA response can be set.

Network Fault

Forwarding FunctionAt calling from the test UE to the Virtual UA, the call can be forwarded unconditionally to the specified destination. Further, using XCAP Service supports setting of forwarding conditions and the destination.

Call Hold/Resume FunctionBoth test UE and Virtual UA hold operations can be verified. In addition, the call can be resumed by pressing the Resume button.

MD8475A

ID: [email protected]

CallingCalling

Virtual UAVirtual UA

Caller ID Display ON/OFF FunctionAfter a call from the test UE, the caller ID (telephone number) display/block function can be validated at the Virtual UA status display field.

Voice Codec Switchover

Any codec can be sent from the MD8475A to the UE, and switchover tests, such as VoLTE → Video, are supported too.

SmartStudio supports VoLTE Conference Call tests specified in 3GPP TS 24.605.

3GPP TS 24.605 4.5.2.1.1 User joining a conference4.5.2.1.2 User inviting another user to a conference4.5.2.1.3 User leaving a conference4.5.2.1.4 User creating a conference4.5.2.1.5 Subscription for the conference event package4.5.2.2.1 Conference focus4.5.2.2.2 Conference notification service4.5.2.7 Actions at the destination UE4.6.1 Communication HOLD (HOLD)4.6.3 Terminating Identification Restriction (TIR)4.6.5 Originating Identification Restriction (OIR)


IMS Options

Section Function Outline MX847570ARequired Option

MX847570A-080 MX847570A-081 MX847570A-083

General

SIP REGIST Test Function for verifying CSCF server Bind/Unbind operation

IPsec Function for on/off at IPsec (3DES, AES).

DNS Server Function for resolving address using DNS

NTP Server Function for synchronizing time using NTP

PSAP Server Function for looping-back voice for IMS Emergency

X-CAP Server Function for verifying service using XML file

No Server (Network) Response Test

Function for verifying operation when no response due to error at server or network

VoLTE/Video

Calling Sequence Test Function for verifying call sequence from UE

Incoming (Answering) Call Sequence Test Function for verifying call sequence to UE *

Voice Loopback Test Function for looping-back and sending uplink voice data to verify call at UE side

Disconnection (from UE) Sequence Test Function for verifying disconnection sequence from UE

Disconnection (from NW) Sequence Test Function for verifying disconnection sequence from network *

Called Party Busy Test Function for verifying operation when called party busy

Called Party Not Found Test Function for verifying operation when called party not found

Called Party No Response Test Function for verifying operation when no response from called party

Codec Selection Tx Function for confirming VoLTE/VT traffic with any codec; also performs loopback

VoLTE/VT Upgrade/Downgrade Switches VoLTE/VT during call

Call ID Display/Block TS 24.607 Verifies IMS test UE call ID display ON/OFF

Incoming Call ID Display/Block TS 24.608 Verifies IMS test UE incoming call ID display ON/OFF

Call Forwarding, Holding, Catchphone

Function for simulating TS 24.604, TS 24.610, TS 24.615 call forwarding, call holding, and catchphone functions

VoLTE Conference Environment Function for verifying TS 24.605 VoLTE Conference related tests (Event message, HOLD, etc.)

Message Waiting Indication Function for notifying users of voice mail services about arriving voice mail

RCS

Configuration Function for creating and updating UE configuration data using XML file

Presence Function for configuring from UE using XML file

Instant Messaging Function for sending and receiving Instant Message using XML file

RCS Address Book Function for registering and saving UE contacts using RCS

SMS over IMS

SMS Message Send Test Function for verifying UE SMS message sending

SMS Message Receive Test Function for verifying UE SMS message receiving

IPv6 addressing

IP Address Allocation and Test (RA) Function for verifying IP address setting at RA receipt

IP Address Allocation and Test (DHCPv6)

Function for verifying IP address setting allocated from DHCPv6 server

*: This option is unnecessary when a separate network-side UE is available.


New ServicesNew network services are being deployed at an increasing rate, requiring more-and-more tests for mobiles supporting such new services. The MD8475A makes it easy to support new mobile test environments.

RCS Test Environment

Rich Communication Suite (RCS) is the next evolutionary step in deploying existing simple voice and messaging (SMS, MMS) services on various networks and UEs with “rich” communications.Installing the MX847570A-083 software supports RC-defined tests of Instant Messaging (IM), Address Book, and Contents sharing.

Function CommentConfiguration & Registration HTTP(S) baseCapability discovery1-to-1 Chat Only supports IMSocial Presence Information

WLAN Offload Test Environment

Offloading data traffic to WLAN networks is being investigated as a technology for preventing traffic congestion on mobile networks. The MD8475A supports a WLAN data offload test environment.MX847570A-070 WLAN Offload Basic OptionThis software option provides functions for forwarding packets between the UE and networks with both Trusted non-3GPP Access and Untrusted non-3GPP Access authentication functions, as well as for monitoring packets graphically.MX847570A-071 ePDG OptionThis software option supports the IKEv2 key exchange procedure and IPsec communications functions for Untrusted non-3GPP Access network authentication.MX847570A-072 ANDSF OptionThis software option supports the function for setting and distributing the system selection policy between 3GPP and WLAN (distributes Policy and Discovery Information according to request from UE, and receives Location and Profile reports from UE).

OKOK

OKOK

Network

MPN

IM(Instant Messaging)

ContentsSharing Presence

MPN

When are you coming？

Soon.

OK. I go to ticket gate!

Look!

090-yyyy-xxxx

090-yyyy-yyyy

[email protected]

090-xxxx-xxxx

IM Content Sharing during IM

Presence SharingIM Content Sharing during IM

Presence Sharing

Service Provision

3GPPNetwork

IMSCore

MX847570A-083 RCS Basic Option

ConfigurationPresenceInstant MessagingVirtual UA


Creating Environment for Difficult Tests on Live NetworkSome UE tests cannot be run on a commercial live network and are difficult on a test network. SmartStudio makes it easy to support these tests.

Attach Reject

Setting specific messages when the UE connects to the base station can be used to reject UE connection requests.

APN Reject

Setting specific messages when the UE connects to the network server can be used to reject UE connection requests.

Barred Call and Emergency Call Tests Access Class ControlSometimes, carriers limit access at events where there are too many people trying to call at once or during abnormally busy times like New Year. SmartStudio can configure an access control test environment, which is difficult to do on a live network. Emergency Call TestObviously, emergency calls cannot be tested on a live network but this is an essential test that must be performed. SmartStudio offers emergency call test settings and execution.

System Control Method Operation

W-CDMA/GSM

Not Barred No Access ControlBarred Call blocking for all communications

Emergency Call blocking for communications except emergency call

CDMA2000/EV-DO

PSIST Call blocking for 1xEV-DOACCT Call blocking for ACCT1X

Emergency Alerts TestUsing the built-in SmartStudio PWS center function supports sending of emergency alerts like earthquake and tsunami warnings to the UE*.ETWS/CMAS messages can be sent at any timing simply by selecting created/edited messages. ETWS (Earthquake and Tsunami Warning System used in Japan) CMAS (Commercial Mobile Alert System) North American

Federal and state government system for sending standard-format text and audio messages to TV broadcast stations

*: Only supported by LTE/W-CDMA/CDMA2000/GSM UEs.

Reject

AttachAttach

RejectReject

NGNG

Operator: A

APN AttachAPN Attach

APN RejectAPN RejectNGNG

Operator: A

Earthquake and Tsunami Warning


RRC State Change Settings When packets stop passing over the network during data packet communications, the Cell Status can be transitioned at a specific timing to switch the UE to any RRC State. This is useful for configuring a test environment mimicking a real network when testing battery life.

Power Consumption Test EnvironmentSmartStudio supports detailed settings such as changes to the mobile RF output and stopping packet communications.

Base Station SettingsAny message, such as Paging Cycle, UL TPC, etc., can be sent to the mobile*.Support W-CDMA CPC, Ec/lor, etc.

Check UE Tx RF PowerMX847506A RF Measurement

Adding RF Measurement supports verification of UE Tx RF power. A mobile power consumption test environment can be configured easily by combined use with SmartStudio base station settings from the mobile. Further, BLER can be verified using graphical or tabulated data.

*: The items which can be setup about each system differ.

Power Consumption Test using SmartStudio ManagerThe MX847503A SmartStudio Manager software is bundled with a test case for measuring the UE power consumption. In addition, the MX847503A can also control peripheral devices simultaneously, shortening the time required for configuring UE test environments.

SmartStudio ManagerSmartStudio

Power Supply

RFCable

USB Cable


Regression Tests which Requires TimeVerification of existing functions and regression testing are key elements of software update testing during UE development. Automated and repeated testing of known items to confirm the absence of new software bugs plays a major role in improving development efficiency and cutting costs.

Automated Testing with SmartStudio

The MX847503A SmartStudio Manager software creates test sequences for running automated tests using the MX847570A SmartStudio software.

Attach Test

Modify

Analyze&

Buliid

Run

Attach Test

Voice Test

Modify

Analyze&

Buliid

Run

Voice Test

SMS Test

Modify

Analyze&

Buliid

Run

SMS Test

UE Feature DevelopmentSoftwareUpdate

SoftwareUpdate

FeedbackFeedback

Test Sequence Editing Screen Test Sequence Continuous Execution Screen

Test Sequence Continuous Execution Results Display

SmartStudio Manager

4. Wait Until UE’s in Communication

3. Start Simulation

1. Configure RAT & Network

(Sim Parameters)

(Cell Parameters)2. Configure BTS

Automation Functions


Regression Tests and Test SequencesA number of common test sequences are bundled with the MX847503A SmartStudio Manager for confirming basic UE operations, including voice calling and receiving, SMS sending and receiving, data throughput, etc. Due to UE limitations, an AT command interface is provided, enabling continuous testing without user operations.

Category Procedure Radio System File Name Packet Rate

Registration

AttachLTE Registration_L_Attach.test DL 15.8M/UL 12.6M @5 MHz

W-CDMA Registration_W_Attach.test -GSM Registration_G_Attach.test -

Out of Service

LTE Registration_L_OutOfService.test DL 15.8M/UL 12.6M @5 MHzW-CDMA Registration_W_OutOfService.test DL 384k/UL 64k

GSM Registration_G_OutOfService.test DL 30.4k/UL 15.2kTD-SCDMA Registration_T_OutOfService.test DL 384k/UL 64kCDMA2000 Registration_C_OutOfService.test

Service

Voice

W-CDMA Service_W_Voice.test -GSM Service_GSM_Voice.test -

TD-SCDMA Service_T_Voice.test -CDMA2000 Service_C_Voice.test -

Packet

W-CDMA Service_W_Packet.test DL 384k/UL 64kGSM Service_GPRS_Packet.test DL 30.4k/UL 15.2k

TD-SCDMA Service_T_Packet.test DL 384k/UL 64kCDMA2000 Service_DO_Packet.test

MOMR CSFB LTE - W-CDMA Service_L2W_CSFB_MOMR.test DL 15.8M/UL 12.6M @5 MHzLTE - GSM Service_L2G_CSFB_MOMR.test DL 15.8M/UL 12.6M @5 MHz

MTNR CSFB LTE - W-CDMA Service_L2W_CSFB_MTNR.test DL 15.8M/UL 12.6M @5 MHzLTE - GSM Service_L2G_CSFB_MTNR.test DL 15.8M/UL 12.6M @5 MHz

Mobility

Cell Selection/ReselectionLTE - LTE Mobility_LL_SelResel.test -

LTE - W-CDMA Mobility_LW_SelResel.test -LTE - GSM Mobility_LG_SelResel.test -

Redirection

LTE - LTE Mobility_LL_Redirection.test DL 15.8M/UL 12.6M @5 MHz

LTE - W-CDMA Mobility_LW_Redirection.test L : DL 15.8M/UL 12.6M @5 MHzW : DL 384k/UL 64k

LTE - GSM Mobility_LG_Redirection.test DL 15.8M/UL 12.6M @5 MHz

Handover

LTE - LTE Mobility_LL_Handover.test DL 15.8M/UL 12.6M @5 MHz

LTE - W-CDMA Mobility_LW_Handover.test L : DL 15.8M/UL 12.6M @5 MHzW : DL 384k/UL 64k

LTE - GSM Mobility_LG_CellChange.test L : DL 15.8M/UL 12.6M @5 MHzG : DL 30.4k/UL 15.2k

MOMR SRVCC LTE - W-CDMA Mobility_LW_SRVCC_MOMR.test DL 15.8M/UL 12.6M @5 MHzMTNR SRVCC LTE - W-CDMA Mobility_LW_SRVCC_MTNR.test DL 15.8M/UL 12.6M @5 MHzTAU LTE Mobility_LL_TAU.test -

RAU/LAU W-CDMA Mobility_WW_RAULAU.test -GSM Mobility_GG_RAULAU.test -

SMS

MO SMS over SGs

LTE SMS_L_SMSoverSGs_MO.test -W-CDMA SMS_W_SMSoverSGs_MO.test -

GSM SMS_G_SMSoverSGs_MO.test -TD-SCDMA SMS_T_SMSoverSGs_MO.test -CDMA2000 SMS_C_SMSoverSGs_MO.test -

MT SMS over SGs

LTE SMS_L_SMSoverSGs_MT.test -W-CDMA SMS_W_SMSoverSGs_MT.test -

GSM SMS_G_SMSoverSGs_MT.test -TD-SCDMA SMS_T_SMSoverSGs_MT.test -CDMA2000 SMS_C_SMSoverSGs_MT.test -

IMS MO SMS over IMS LTE IMS_L_SMSoverIMS_MO.test DL 15.8M/UL 12.6M @5 MHzMT SMS over IMS LTE IMS_L_SMSoverIMS_MT.test DL 15.8M/UL 12.6M @5 MHz

Battery Consumption

Stand-by Test

GSM TS09_GSM_StandbyTime.test -GSM TS09_G_StandbyTime.test -

W-CDMA TS09_W_StandbyTime.test -GSM - W-CDMA TS09_GSM_W_StandbyTime.test -GSM - W-CDMA TS09_G_W_StandbyTime.test -W-CDMA - GSM TS09_W_G_StandbyTime.test -

LTE TS09_L_StandbyTime.test -

MOMR: Talk time Test GSM TS09_GSM_TalkTime_MO_MR.test -W-CDMA TS09_W_TalkTime_MO_MR.test -

MTNR: Talk time Test GSM TS09_GSM_TalkTime_MT_NR.test -W-CDMA TS09_W_TalkTime_MT_NR.test -

Packet Switch Transfer Test GSM TS09_GPRS_PacketSwitchedTransfer.test DL 83.1k/UL 20.8kW-CDMA TS09_W_PacketSwitchedTransfer.test DL 7.2M/UL 5.76M

Packet Switch Transfer Test (Download) LTE TS09_L_PacketSwitchedTransfer_FileDownload.test DL 5.16M/UL 5.54M @10 MHzPacket Switch Transfer Test (Upload) LTE TS09_L_PacketSwitchedTransfer_FileUpload.test DL 5.16M/UL 5.54M @10 MHzPacket Switch Transfer Test (Down/Upload) LTE TS09_L_PacketSwitchedTransfer_ParallerFileDlUl.test DL 21.4M/UL 22.9M @10 MHz

Browsing Test W-CDMA TS09_W_HTMLBrowsing.test DL 7.2M/UL 5.76MBrowsing Test (Full Web Browsers) W-CDMA TS09_W_HTMLBrowsing_Full.test DL 7.2M/UL 5.76MStreaming Content Test (Video) LTE TS09_L_StreamingContent_Video.test DL 5.16M/UL 5.54M @10 MHzStreaming Content Test (Audio) LTE TS09_L_StreamingContent_Audio.test DL 5.16M/UL 5.54M @10 MHzVideo Telephony Test W-CDMA TS09_W_VideoTelephony.test -

FTP Download Test W-CDMA TS09_W_FTPDownload.test DL 7.2M/UL 5.76MGSM TS09_GPRS_FTPDownload.test DL 83.1k/UL 20.8k


Support FunctionsSmartStudio Test Functions

Function Description SmartStudioLTE W-CDMA GSM CDMA2000 TD-SCDMA

GeneralLocation Registration Connects MD8475A and UE and creates test environment. L1/L2 Counter Measured values indicating the performance of Layer 1 and Layer 2. − − Throughput Monitor Counter Actual data throughput can be verified at a fixed rate or at a rate determined by UE. − Trace View The sequence of each layer is displayed on real time. Reject Returns arbitrary rejection message when UE connects. − − −Setting Neighbor Cells Notifies UE about base station adjoining base station under test. RF Relation

Power Control for GUI Power control for BS is changed into IDLE and Communication. Out of Service Setting Sets BTS Power output to OFF and sets UE to outside NW condition. RF Monitor The channel power, such as frequency, a frequency error and PDSCH, and PUSCH, is displayed. − TPC Setting TPC (Transmit Power Control) can be changed arbitrarily. − AWGN*1 Sends AWGN along with usual signal. − − − −RF Measurement Option Measures values of UE RF Tx power every second. − −

Remote ControlEthernet SmartStudio operation control (parameter selection, start, etc.) from external PC. GPIB SmartStudio parameter setting control from external PC.

Voice/Video CallLTE FDD/TD-LTE

VoLTE Call (Loopback) Voice over LTE (VoLTE) UE call tests. Emergency Call/Answer Control Sets restrictions on LTE emergency calls and VoLTE/Video calls. Codec change Changes voice and video codecs arbitrarily for performing UE changeover tests.

LTE FDD/TD-LTE/W-CDMA/GSM/CDMA2000/TD-SCDMA

CSFB/eCSFB*2 Switches communications automatically at arrival of voice call from other system during VoLTE call.

SRVCC*2 Tests seamless switching to W-CDMA voice call during VoLTE call. W-CDMA/GSM/CDMA2000/TD-SCDMA

UE Originated/Terminated Voice Call (Loopback/Echoback) Performs loopback communication test*3. UE Originated/Terminated Voice Call (Handset) Performs handset communication test. − Emergency Call Performs Emergency Call test with or without Test SIM*4. Caller ID Setting Performs Show ID/Hide ID/Unknown ID/Payphone/International call settings. Access Class Barred (Release99) [Barred] Bars all calls according to Release 99 standard. Access Class Barred (Release99) [Emergency] Bars all calls except emergency calls according to Release 99 standard. Access Class Barred (PSIST/ACCT) Bars all calls according to CDMA2000.

W-CDMA/TD-SCDMAUE Originated/Terminated Video Call (Loopback) Performs loopback communication test*3.

Packet ConnectionIPv4 Packet Test Data supporting IPv4 can be sent and received. IPv6 Packet Test Data supporting IPv6 can be sent and received. Packet Preservation/Dormant Test Releases RRC Connection while maintaining PDP Context. − Multiple PDP Context/PDN Connect Connects multiple PDNs and performs multi-session packet tests. − −State Change Changes state from base station during packet communications. − LTE FDD/TD-LTE

UE Originated SISO/MIMO*5 Packet Call Performs application tests utilizing packet data communications by connecting to server. UE Terminated SISO/MIMO*5 Packet Call Performs application tests utilizing packet data communications by connecting to server.SISO/MIMO*5 Packet Call Released from UE SISO/MIMO*5 Packet Call Released from NW 2CC SISO/MIMO*6 Packet Call/Answer Tests applications using packet data from server connection. 2CC SISO/MIMO*6 Packet Call Released from UE 2CC SISO/MIMO*6 Packet Released from NW

W-CDMAUE Originated W-CDMA/HSPA*7/HSPA Evolution*8 Packet Call Performs application tests utilizing packet data communications by connecting to server. UE Terminated W-CDMA/HSPA*7/HSPA Evolution*8 Packet Call Performs application tests utilizing packet data communications by connecting to server.W-CDMA/HSPA*7/HSPA Evolution*8 Packet Call Released from UE W-CDMA/HSPA*7/HSPA Evolution*8 Packet Call Released from NW UE Originated PPP Packet Call Performs PPP (Built-in server) packet data communication test (Not support Serial connection). PPP Packet Call Released from UE Performs PPP (Built-in server) packet data communication test. PPP Packet Call Released from NW Performs PPP (Built-in server) packet data communication test.

GSMUE Originated GPRS/EGPRS*9 Packet Call Performs application tests utilizing packet data communications by connecting to server. UE Terminated GPRS/EGPRS*9 Packet Call Performs application tests utilizing packet data communications by connecting to server.GPRS/EGPRS*9 Packet Call Released from UE GPRS/EGPRS*9 Packet Call Released from NW

CDMA2000UE Originated CDMA2000/EVDO*10 Packet Call Performs application tests utilizing packet data communications by connecting to server. CDMA2000/EVDO*10 Packet Call Released from NW SV-DO Simultaneous CDMA2000 1X voice call and 1xEV-DO packet data connections.

TD-SCDMAUE Originated TD-SCDMA/HSPA*11 Packet Call Performs application tests utilizing packet data communications by connecting to server. UE Terminated TD-SCDMA/HSPA*11 Packet Call Performs application tests utilizing packet data communications by connecting to server.TD-SCDMA/HSPA*11 Packet Call Released from UE TD-SCDMA/HSPA*11 Packet Call Released from NW

MessagingETWS Transmission ETWS alert tests during IDLE and Communication conditions. − − −CMAS Transmission CMAS alert tests during IDLE and Communication conditions. − −SMS Transmission/Reception SMS (7bit-ASCII, Unicode, Binary) tests on PS and CS networks*3. SMS over IMS SMS TRx tests via IMS server. − − − −Continuous SMS Sending Continuous sending of selected multiple SMS messages to UE. MMS Transmission/Reception*12 Performs MMS transmission/reception test.

*1: Supports only MD8475A-011 or MD8475A-070.*2: Only supports two-system tests.*3: Not supported for 2-UE testing by one MD8475A.*4: Test SIM not used by CDMA2000.*5: Requires MIMO option (MX847550A-020) and 2nd RF (MD8475A-001).*6: Requires MX847550A-040 at 2CC SISO tests, as well as two MD8475A units

for 2CC MIMO tests.

*7: Requires HSPA option (MX847510A-001).*8: Requires HSPA Evolution option (MX847510A-011, MX847570A-011).*9: Requires EGPRS option (MX847520A-001).*10: Requires 1xEV-DO option (MD8475A-032).*11: Requires TD-SCDMA option (MX847540A-001).*12: Requires separate MMS application server.


Panel Layout

Power switch [RF Main] N-type Main I/O connector (N) [RF Aux1] N-type auxiliary I/O connector 1 (N) [RF Aux2] N-type auxiliary I/O connector 2 (N) Left keys Right keys

[Pointer] Pointer Cursor keys Enter key Off-hook key On-hook key Prev key Next key Help key Keyboard key Shift key [HDD] Hard disk access lamp Backspace key Numeric keypad, symbol keys [Handset] Handset connector [USB] USB connectors

[Trigger I/O Input] Trigger input connector (BNC) [Trigger I/O Output] Trigger output connector (BNC) [Call Proc Timing I/O A to F]

Timing I/O connectors for call processing (15 Pin Mini D-Sub)Shared connectors D/E

[Call Proc Serial I/O A to F] Serial I/O connectors for call processing (9 Pin Mini D-Sub)Shared connectors D/E

[eSATA] eSATA connector Microphone connector (ø3.5 mm) Headphone connector (ø3.5 mm) [Ethernet 1] Ethernet 1 connector (RJ-45) [Ethernet 0] Ethernet 0 connector (RJ-45) [ISDN] ISDN connector (RJ-45) <Option> [VGA] VGA connector (15 Pin Mini D-Sub) [RS-232C] RS-232C connector (9 Pin Mini D-Sub) [10 MHz Ref Input] Reference signal input connector (BNC) [10 MHz Buff Output] Reference signal input connector (BNC) [Freq Adj] Frequency adjustment [GPIB] GPIB connector [Call Proc Ethernet] Call Proc Ethernet I/O Port (RJ-45) Fading IO connector <Option> Power inlet (100 Vac to 120 Vac/200 Vac to 240 Vac)

to


System Configurations/Option/Software

Main Frame OptionsMD8475A-001 2nd RFThis option is required for tests using two RF signals, such as 2-cell and MIMO tests.

MX847502A Multi-cell SoftwareCombined used with the MD8475A-001 2nd RF option supports simultaneous startup of two systems. However, this is not required for CDMA2000 and EV-DO hybrid tests.

MX847506A RF MeasurementInstalling combinations of the MX847510A, MX847520A, and MX847550A software options supports extended RF Tx power accuracy, RF Rx power, and BLER measurements for each system.

MX847570A SmartStudioInstalling this software in the MD8475A supports a scenario-less test user interface for sending/receiving SMS and ETWS/CMAS messages, voice calls, packet data, etc., as well as CSCF server functions required by IMS service tests.

Automation ToolMX847503A SmartStudio ManagerThis software automates manual testing using the MX847570A SmartStudio software to improve evaluation efficiency using operator-free automation. Additionally, the bundled package of test sequences supports evaluation of basic functions.

Scenario ToolsMX847580A SIDE Software*MX847580A-050 LTE FDD/W-CDMA/GSM OptionMX847580A-018 SIP OptionThese software are for executing scenarios created using the MX843080A Scenario Integrated Development Environment in combination with the MX847510A, MX847520A, and MX847550A software.

MX702600B CDMA2000 Scenario ComposerMX702600B-SS110 MX702600B 1 Year Support ServiceThis software creates CDMA2000 test scenarios using a ladder sequence design. The created test scenarios are executed using the PVT (Protocol Visualization Tool) provided with the MX847530A software.

W-CDMABasic Configuration (Voice/Video/Packet)

MD8475A-070 Multi-signalling UnitMX847510A W-CDMA Simulation SoftwareMX847570A-010 W-CDMA OptionThese are for basic W-CDMA configuration. These tests support voice, videophone, packet, and SMS tests.

Options

MX847510A-001 HSPA OptionThis option performs evaluation of HSPA UE categories defined by the 3GPP Release 5/Release 6 standards.

MX847510A-011 HSPA Evolution/DC-HSDPA OptionMX847570A-011 HSPA Evolution/DC-HSDPA OptionCombination with the MX847510A-001 HSPA software option supports W-CDMA high-speed packet service HSPA Evolution and DC-HSDPA tests.

3GPP TS 25.306 Category List for MX847570AHSDPA

HS-DSCHCategory

HS-DSCHCodes

MinimumInter-TTI TB-Sizes

Total Numberof SoftChannel Bits

ModulationMaximumThroughput

[bps] 5* 5 1 7298 57600 QPSK/16QAM 36490006 5 1 7298 67200 QPSK/16QAM 3649000

7* 10 1 14411 115200 QPSK/16QAM 72055008 10 1 14411 134400 QPSK/16QAM 72055009 15 1 20251 172800 QPSK/16QAM 10125500

10 15 1 27952 172800 QPSK/16QAM 1397600012 5 1 3630 28800 QPSK 1815000

13 15 1 35280 259200 Not Applicable (dual cell

operation not supported)

17640000

14 15 1 42192 259200 21096000

21 15 1 23370 345600 QPSK/16QAM 2337000022 15 1 27952 345600 QPSK/16QAM 2795200023 15 1 35280 518400 QPSK (16QAM)

64QAM35280000

24 15 1 42192 518400 42192000

HSUPA

E-DCHCategory

E-DCHCodes

MinimumSpreadingFactor

Support forTTI EDCH

TB-SizesE-DCH TTI

MaximumThroughput

[bps]3 2 SF4 10 ms TTI 14484 14595005 2 SF2 10 ms TTI 20000 29185006 4 SF2 10 ms TTI 14484 5760000

*: Not supported when UE specifies a category.

MX847510A-050 W-CDMA Ciphering OptionThis options adds the W-CDMA ciphering function*1, *2 and support for KASUMI (3GPP-recommended algorithm).*1: Not supported for MX847570A.*2: The Integrity function does not require the MX847510A-050.

MD8475A-090 ISDN InterfaceThis hardware option adds an ISDN interface (BRI).

Support Service

MX847510A-SS110 MX847510A 1Year Support ServiceThis service supports help enquiries and maintenance releases (bug fixes) for 1 year.


Basic Configuration

MD8475A-070 Multi-signalling UnitMX847550A LTE Simulation SoftwareMX847550A-010 LTE FDD OptionMX847550A-015 LTE TDD OptionMX847570A-050 LTE FDD OptionMX847570A-055 LTE TDD OptionThese are for basic LTE FDD/TDD configuration. FDD and TDD can be chosen. These tests support confirmation of connections with LTE UEs during SISO, packet communications, and SMS sending/receiving. In addition, 2-cell tests are supported by installing the MX847502A Multi-cell Software.

3GPP TS 36.306 V8.4.0 (2009-06) Category ListThe MD8475A supports UE categories 1 to 4 and will support all new future categories.LTE (DL)

UE Category

Maximum number of DL-SCH transport block bits received

within a TTI

Maximum number of bits of a DL-SCH transport block

received within a TTI

Total number of

soft channel bits

Maximum number of supported layers for spatial multiplexing

in DL1 10296 10296 250368 12 51024 51024 1237248 23 102048 75376 1237248 24 150752 75376 1827072 25 299552 149776 3667200 4

LTE (UL)

UE Category

Maximum number of bits of an UL-SCH transport

block transmitted within a TTI

Support for 64QAM in UL

1 5160 No2 25456 No3 51024 No4 51024 No5 75376 Yes

Options

MX847550A-020 LTE 2×2 MIMO OptionInstalling the MD8475A-001 configures an environment*1 using 2×2 MIMO for testing maximum throughput, etc.LTE 2×2 MIMO Correspondence Function

2×2 MIMO without option

2×2 MIMO with option

Transmission Mode TM1 TM1, TM2, TM3Maximum TBS of each subframe 75376 75376 (per 1CW)

102048 (sum of 2CWs)

MX847550A-040 LTE Carrier Aggregation OptionThis option adds the LTE Carrier Aggregation function. A 2CC SISO test environment can be configured by combining with the MD8475A-001 and MD8475A-070. In addition, 2CC MIMO tests are supported using two MD8475A units. However, both sides require the MD8475A-003 option to connect the two MD8475A units.MD8475A-003 Fading IO OptionThis hardware option is required by the two MD8475A units when configuring a 2CC MIMO test environment. In addition, combining one MD8475A with one MF6900A Fading Simulator supports configuration of an LTE Fading test environment.MX847550A-050 LTE Ciphering OptionThis options adds the LTE ciphering function*2, *3 and support SNOW 3G (3GPP-recommended algorithm) and AES.

GSMBasic Configuration

MD8475A-020 GSM Signalling UnitMX847520A GSM/GPRS Simulation SoftwareMX847570A-020 GSM OptionThese are for basic GSM/GPRS configuration. These tests support voice, video phone, packet, and SMS tests.

Options

MX847520A-001 EGPRS OptionThis option supports EGPRS evaluation — a GPRS high-speed, data communication method. Application tests using EGPRS communications are supported.EGPRS Supported Specifications

Layer 1

Frequency Bandwidth 850, 900, 1800, 1900 MHzModulation & Coding Scheme

MCS 1, 2, 3, 4 (GMSK)MCS 5, 6, 7, 8, 9 (8PSK)

Number of Slots Up to Multi Slot Class 12 (DL: 4 / UL: 4 / SUM: 5)

Channel Combination Combination 11 & 13

Layer 2, 3

Broadcasting Control Channel BCCH/CCCH, PBCCH/PCCH

ARQ Type Type 1Window Size 64 to 192

Standard 3GPP Release99

MX847520A-050 GSM/GPRS Ciphering OptionThis option adds the GSM/GPRS ciphering function*1, *2 and supports both the GSM A5/1, A5/2, and A5/3 ciphering algorithms as well as the GPRS GEA/1, GEA/2, and GEA/3 ciphering algorithms.*1: Not supported for MX847570A.*2: The Integrity function does not require the MX847520A-050.

Support Service


LTE

MX847550A-060 LTE RoHC OptionThis option adds the header compression algorithm of an IP packet to LTE.Supported Profiles

IP Profile0x0000 No compression (LTE)/Uncompressed (UMTS)0x0001 RTP/UDP/IP0x0002 UDP/IP

Support ServiceMX847550A-SS110 MX847550A 1Year Support ServiceThis service supports help enquiries and maintenance releases (bug fixes) for 1 year.

*1: Handover tests not supported when testing 2×2 MIMO.*2: Not supported for MX847570A.*3: The Integrity function does not require the MX847550A-050.


TD-SCDMABasic Configuration

MD8475A-040 TD-SCDMA Signalling UnitMX847540A TD-SCDMA Simulation SoftwareMX847570A-040 TD-SCDMA OptionThese are for basic TD-SCDMA configuration. These tests support voice, videophone, packet, and SMS tests.

Options

MX847540A-001 TD-HSPA OptionThis is used to evaluate all 3GPP TS 25.306 HSPA UE categories*1.

3GPP TS 25.306TD-HSDPA

HS-DSCHcategory

Maximum number of HSDSCH codes per timeslot

Maximum number of HSDSCH timeslots per TTI

Maximum number of HSDSCH transport channel bits can be received within an

HSDSCH TTI

Total number of soft

channel bits

Maximum Throughput

[bps]

Category 1 to 3 16 2 2788 11264 557600Category 4 to 6 16 2 5600 22528 1120000Category 7 to 9 16 3 8416 33792 1688200Category 10 to 12 16 4 11226 45056 2245200Category 13 to 15 16 5 14043 56320 2808600

TD-HSUPA

E-DCHcategory

Maximum number of E-DCH timeslots

per TTI

Maximum number of E-DCH transport

channel bits that can be received within an

E-DCH TTI

Maximum Throughput

[bps]

Category 1 2*2 2754 550800Category 2 3*2 4162 832400Category 3 2*2 5532 1106400Category 4 3*2 8348 1669600Category 5 4*2 11160 2232000Category 6 5*2 11160 2232000

*1: MX847570A supports Category 6.*2: One timeslot supports two physical channels when 16QAM not used.

MX847540A-050 TD-SCDMA Ciphering OptionThis option adds the TD-SCDMA ciphering function*3, *4 and support SNOW 3G (3GPP-recommended algorithm).*3: Not support for MX847570A.*4: The Integrity function does not require the MX847540A-050.

Support Service


CDMA2000Basic Configuration

MD8475A-030 CDMA2000 1X Signalling UnitMD8475A-032 CDMA2000 1xEV-DO Signalling UnitMX847530A CDMA2000 Simulation SoftwareMX847570A-030 CDMA2000 OptionThese are for basic CDMA2000 1X/1xEV-DO configuration. These tests support voice communications (echoback), packet, and SMS tests. Combination with the MD8475A-001 configures a hybrid environment.

Options

MX847530A-001 Multi-sector/Multi-carrier Option*This software option supports simulation of various handover tests including Soft, Softer, Hard, Idle, and Access, by dynamically changing the CDMA2000 1X/1xEV-DO multi-carrier (Max. 2) and multi-sector (1X: Max. 6, 1xEV-DO: Max. 3). One MD8475A unit supports testing in multi-carrier/multi-sector environments where verification using a live network is difficult. It improves the efficiency of operation verification, the Inter Operability Test (IOT) at mobile R&D, and the field-testing pre-verification.*: Not supported for MX847570A.

Support Service



SmartStudio System Configuration

SystemLTE

W-CDMA GSM TD-SCDMA CDMA2000FDD TDD

Unit MD8475A Signalling Tester

Unit OptionMD8475A-001 2nd RF

MX847502A Multi-cell Software

Basic Configuration

Software

MX847550ALTE Simulation Software MX847510A

W-CDMA Simulation Software

MX847520AGSM/GPRS

Simulation Software

MX847540A TD-SCDMA

Simulation Software

MX847530ACDMA2000

Simulation SoftwareMX847550A-010LTE FDD Option

MX847550A-015 LTE TDD Option

Hardware MD8475A-070 Multi-signalling Unit

MD8475A-070 Multi-signalling Unit

MD8475A-020GSM Signalling Unit

MD8475A-040 TD-SCDMA

Signalling Unit

MD8475A-030CDMA2000 1X Signalling UnitMD8475A-032

CDMA2000 1xEV-DO Signalling Unit

User Interface MX847570A SmartStudio

SmartStudioLicense

SystemLicense

MX847570A-050LTE FDD Option

MX847570A-055LTE TDD Option

MX847570A-010W-CDMA Option

MX847570A-020GSM Option

MX847570A-040 TD-SCDMA Option

MX847570A-030CDMA2000 OptionMX847570A-011

HSPA Evolution/DC-HSDPA Option

IMSMX847570A-080 Extended CSCF OptionMX847570A-081 IMS Supplementary Service OptionMX847570A-083 RCS Basic Option

WLANMX847570A-070 WLAN Offload Basic OptionMX847570A-071 ePDG OptionMX847570A-072 ANDSF Option

Options

MX847550A-020LTE 2×2 MIMO Option

MX847510A-001HSPA Option

MX847520A-001EGPRS Option

MX847540A-001 TD-HSPA Option MX847530A-001

Multi-sector/Multi-carrier Option

MX847550A-040 LTE Carrier Aggregation Option MX847510A-011

HSPA Evolution/DC-HSDPA OptionMX847550A-060

LTE RoHC OptionMD8475A-003

Fading IO OptionMD8475A-090ISDN Interface

MX847550A-050LTE

Ciphering Option

MX847510A-050W-CDMA

Ciphering Option

MX847520A-050GSM/GPRS

Ciphering Option

MX847540A-050 TD-SCDMA

Ciphering OptionRF Measurement MX847506A RF Measurement - -Remote Interface MX847503A SmartStudio Manager

Support ServiceMX847550A-SS110

MX847550A 1Year Support Service

MX847510A-SS110MX847510A

1Year Support Service

MX847520A-SS110MX847520A


MX847540A-SS110 MX847540A


MX847530A-SS110MX847530A


IMS OptionsMX847570A-080 Extended CSCF OptionThis software option adds functions for calling from the network to the mobile as well as extended functions for CSCF-server-side network congestion and no response status.

MX847570A-081 IMS Supplementary Service OptionThis software option adds other service tests, including VoLTE caller ID display, call forwarding, call holding, etc.

MX847570A-083 RFC Basic OptionThis software option simulates RCS services. It is used to perform tests including RCS Configuration, Registration, Instant Messaging, etc.

WLAN Offload OptionsMX847570A-070 WLAN Offload Basic OptionThis software option provides an EAP authentication server for performing EAP over RADIUS communications (EAP-SIM/EAP-AKA) between a WLAN access point and the EAP authentication server. Additionally, data access by the physical bearers is displayed to verify the 3GPP/WLAN switchover.

MX847570A-071 ePDG OptionThis software option provides an ePDG server for testing the UE functions at Untrusted non-3GPP Access by running IKEv2 key exchanges and IPsec communications between the UE and ePDG. It requires the MX847570A-070 option as well.

MX847570A-072 ANDSF OptionThis software option provides the ANDSF function for testing the UE functions after ANDSF policy distribution to the UE. It requires the MX847570A-070 options as well.


MD8475A Signalling Tester

RF Connector

RF Input/Output connector (RF Main, RF Aux1, RF Aux2) Connector: N type, Impedance: 50Ω, VSWR: ≤1.5 (500 MHz to 3 GHz)

Reference oscillator Frequency: 10 MHz Level: TTL level Connector: BNC type Startup characteristics: ±5 × 10–8 (5 minutes after power-on, referenced to frequency 24 hours after power-on)Aging rate: 2 × 10–8/day, ≤1 × 10–7/year (referenced to frequency 24 hours after power-on)Temperature characteristics: ≤±2 × 10–8

External reference input Frequency: 10 MHz, Acceptable frequency range: ±0.5 ppm, Level: ≥0 dBm, Impedance: 50Ω, Connector: BNC type

Transmission Characteristics

FrequencyFrequency range: 350 MHz to 3.6 GHzSetting resolution: 100 kHz (Depending on MX847501A used)Accuracy: Based on reference oscillator accuracy

Output levelLevel range: –130 to –10 dBm (Main, Aux1, Aux2)Resolution: 0.1 dBTransmission level (with MX847506A)

±1.0 dB (–120 dBm ≤ Output level, 350 MHz ≤ Frequency ≤ 3 GHz, 20° to 30°C, after CAL, with MX847506A) ±1.2 dB (–120 dBm ≤ Output level, 3 GHz < Frequency ≤ 3.6 GHz, 20° to 30°C, after CAL, with MX847506A)

Signal purityNon-harmonic spurious: ≤–40 dBc (at ≥500 kHz frequency offset)Harmonics: ≤–25 dBc

Reception Characteristics

FrequencyFrequency range: 350 MHz to 3.6 GHzSetting resolution: 100 kHz (Depending on MX847501A used)

LevelMaximum input level: +35 dBm (Average)Input level range: –60 to +35 dBm

(with MD8475A-010, MD8475A-011, MD8475A-030, MD8475A-032, MD8475A-050, MD8475A-070) –30 to +40 dBm (in-burst average power) (with MD8475A-020)

Reference level: –60 to +35 dBmReception level (with MX847506A)

MX847510A ±1.1 dB (–60 to +35 dBm, 350 MHz ≤ Frequency ≤ 3 GHz, 20° to 30°C, after CAL) ±1.3 dB (–60 to +35 dBm, 3 GHz < Frequency ≤ 3.6 GHz, 20° to 30°C, after CAL)MX847520A ±1.1 dB (–30 to +40 dBm, 350 MHz ≤ Frequency ≤ 3 GHz, 20° to 30°C, after CAL) ±1.3 dB (–30 to +40 dBm, 3 GHz < Frequency ≤ 3.6 GHz, 20° to 30°C, after CAL)MX847550A ±1.1 dB (–50 to +35 dBm, 350 MHz ≤ Frequency ≤ 3 GHz, 20° to 30°C, after CAL) ±1.3 dB (–50 to +35 dBm, 3 GHz < Frequency ≤ 3.6 GHz, 20° to 30°C, after CAL) ±2.0 dB (–60 to +35 dBm, 350 MHz ≤ Frequency ≤ 3.6 GHz, after CAL)

Variable rangeRx level setting resolution: 1 dB

General

Display: Color TFT LCD screen, 12.1 inches (wide type), 1280 × 800 dotsExternal interface

Trigger I/O: BNCCall Proc Timing I/O: 15-pin mini D-Sub connectorCall Proc Serial I/O: D-sub connector, RS-232C levelCall Proc Ethernet A/B: RJ45 connector, 10/100/1000BASE-THandset: RJ-11 connectorHeadphone: 3.5-mm dia. headphone jackMicrophone: 3.5-mm dia. microphone jackUSB: USB2.0, Type A, 4 portsRS-232C: D-sub connector, conforms to RS-232C GPIB: IEEE488 connectorVGA: Mini D-Sub connectorEthernet 0/1: RJ-45 connector 10/100/1000BASE-T

Power Supply 100 Vac to 120 Vac (±10%)/200 Vac to 240 Vac (–15%/+10%, Max.: 250 Vac), 50 Hz to 60 Hz (Rating), ≤600 VA (Max.)Dimensions and Mass 426 (W) × 221.5 (H) × 398 (D) mm (excl. protrusions), <25 kg (with all options) Temperature Range & Humidity Operation: +5° to +40°C, Storage: –20° to +60°C, ≤90% (no condensation)EMC EN 61326-1, EN 61000-3-2LVD EN 61010-1

Specifications


Please specify the model/order number, name and quantity when ordering.The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.

Ordering Information

B0651A Carrying Case

Model/Order No. Name

MD8475AMain frameSignalling Tester

MX847500AMX847501A

P0035BP0035B7J1440AZ0541AZ0975AA0058A

Standard accessoriesPlatform Software (Factory-installed)Control Software (Factory-installed)Power CordMD8475A CD-ROM (Operation manual)W-CDMA/GSM Test USIM (Standard UICC size)W-CDMA/GSM Test USIM (Micro UICC Size)LAN Cable (3 m)USB MouseKeyboard (USB)Handset

MD8475A-001Hardware option2nd RF

MX847502AMX847506A

Software optionsMulti-cell Software (License)RF Measurement

MX847580AMX847580A-018MX702600B

SIDE Execution Software (License)SIP Execution Option (License)CDMA2000® Scenario Composer

MX847503AZ1813A

Automation toolsSmartStudio ManagerUSB Dongle (Automation)

MX847570AMX847570A-010MX847570A-011MX847570A-020MX847570A-030MX847570A-040MX847570A-050MX847570A-055MX847570A-070MX847570A-071MX847570A-072MX847570A-080MX847570A-081MX847570A-083

User interfaceSmartStudio (License)W-CDMA Option (License)HSPA Evolution/DC-HSDPA Option (License)GSM Option (License)CDMA2000 Option (License)TD-SCDMA Option (License)LTE FDD Option (License)LTE TDD Option (License)WLAN Offload Basic OptionePDG OptionANDSF OptionExtended CSCF Option (License)IMS Supplementary Service Option (License)RCS Basic Option

MD8475A-070MX847550AMX847550A-010MX847550A-015MX847550A-020MX847550A-040MX847550A-050MX847550A-060MD8475A-003

LTE systemMulti-signalling UnitLTE Simulation Software (License)LTE FDD Option (License)LTE TDD Option (License)LTE 2×2 MIMO Option (License)LTE Carrier Aggregation OptionLTE Ciphering Option (License)LTE RoHC Option (License)Fading IO Option

MD8475A-070MX847510AMX847510A-001MX847510A-011MX847510A-050MD8475A-090

W-CDMA systemMulti-signalling UnitW-CDMA Simulation Software (License)HSPA Option (License)HSPA Evolution/DC-HSDPA Option (License)W-CDMA Ciphering Option (License)ISDN Interface

MD8475A-020MX847520AMX847520A-001MX847520A-050

GSM systemGSM Signalling UnitGSM/GPRS Simulation Software (License)EGPRS Option (License)GSM/GPRS Ciphering Option (License)

MD8475A-030MD8475A-032MX847530AMX847530A-001

CDMA2000 systemCDMA2000 1X Signalling UnitCDMA2000 1xEV-DO Signalling UnitCDMA2000 Simulation Software (License)Multi-sector/Multi-carrier Option (License)

MD8475A-040MX847540AMX847540A-001MX847540A-050

TD-SCDMA systemTD-SCDMA Signalling UnitTD-SCDMA Simulation Software (License)TD-HSPA Option (License)TD-SCDMA Ciphering Option (License)

Model/Order No. Name

MX847510A-SS110MX847520A-SS110MX847530A-SS110MX847540A-SS110MX847550A-SS110MX702600B-SS110MC0011A

Software support servicesMX847510A 1Year Support Service (License)MX847520A 1Year Support Service (License)MX847530A 1Year Support Service (License)MX847540A 1Year Support Service (License)MX847550A 1Year Support Service (License)MX702600B 1Year Support Service (License)Web Access Key (USB dongle)

MD8475A-ES210MD8475A-ES310MD8475A-ES510

Warranty2 Years Extended Warranty Service3 Years Extended Warranty Service5 Years Extended Warranty Service

41KC-3B0651AB0655AB0329DJ0004J0127AJ0127BJ0576BJ0576DJ0658J1262AJ1262BJ1263J1265J1287J1333AJ1334AJ1416AJ1440AJ1524AJ1549AJ1605AJ1609AJ1610AP0035BP0035B7P0135A6P0135A7P0250A6P0250A7P0260A6P0260A7Z0749

Application partsFixed Attenuator 3 dBCarrying CaseRack Mount KitFront Cover for 1MW 5UCoaxial Adaptor (N (male)-SMA (female))Coaxial Cord, 1.0 m (BNC-P · RG58A/U · BNC-P)Coaxial Cord, 2.0 m (BNC-P · RG58A/U · BNC-P)Coaxial Cord, 1.0 m (N-P · 5D-2W · N-P)Coaxial Cord, 2.0 m (N-P · 5D-2W · N-P)Adapter (SMA male-female L-type)RS-232C Cable (Straight 2 m, male-female)RS-232C Cable (Crossover 2 m, male-female)W-CDMA Interface Cable (UE connection cable)Adapter (Serial connector, male-male)HDD-SUB15P Cable (milli-inch, for connecting MN8110B)HDD-SUB15P Crossover Cable (inch)CDMA2000 CableLVDS CableLAN CableDsub15-BNC Conversion CableLTE-C2K Sync CableMD8475A 3GPP Sync CableSignal DividerMD8475A 2CC MIMO Connect Cable KitW-CDMA/GSM Test USIM (Standard UICC Size)W-CDMA/GSM Test USIM (Micro UICC Size)Anritsu Test UICC GA (nano UICC Size)Anritsu Test UICC GA (Micro UICC Size)Anritsu Test UICC GT (nano UICC Size)Anritsu Test UICC GT (Micro UICC Size)Anritsu Test UICC GM (nano UICC Size)Anritsu Test UICC GM (Micro UICC Size)MN8110B + Inch Screw Cable (for call processing I/O)


Note:

• United StatesAnritsu Company1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brazil Anritsu Eletrônica Ltda.Praça Amadeu Amaral, 27 - 1 Andar01327-010 - Bela Vista - São Paulo - SP - BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

• MexicoAnritsu Company, S.A. de C.V.Av. Ejército Nacional No. 579 Piso 9, Col. Granada11520 México, D.F., MéxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

• United KingdomAnritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200 Fax: +44-1582-731303

• FranceAnritsu S.A.12 avenue du Québec, Bâtiment Iris 1- Silic 612,91140 VILLEBON SUR YVETTE, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

• ItalyAnritsu S.r.l.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711 Fax: +39-6-502-2425

• SwedenAnritsu ABKistagången 20B, 164 40 KISTA, SwedenPhone: +46-8-534-707-00 Fax: +46-8-534-707-30

• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

• DenmarkAnritsu A/SKay Fiskers Plads 9, 2300 Copenhagen S, DenmarkPhone: +45-7211-2200Fax: +45-7211-2210

• RussiaAnritsu EMEA Ltd. Representation Office in RussiaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962

• United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

• IndiaAnritsu India Private Limited2nd & 3rd Floor, #837/1, Binnamangla 1st Stage, Indiranagar, 100ft Road, Bangalore - 560038, IndiaPhone: +91-80-4058-1300Fax: +91-80-4058-1301

• SingaporeAnritsu Pte. Ltd.11 Chang Charn Road, #04-01, Shriro HouseSingapore 159640Phone: +65-6282-2400Fax: +65-6282-2533

• P.R. China (Shanghai)Anritsu (China) Co., Ltd.Room 2701-2705, Tower A, New Caohejing International Business CenterNo. 391 Gui Ping Road Shanghai, 200233, P.R. ChinaPhone: +86-21-6237-0898Fax: +86-21-6237-0899

• P.R. China (Hong Kong)Anritsu Company Ltd.Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza,No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. ChinaPhone: +852-2301-4980Fax: +852-2301-3545

• JapanAnritsu Corporation8-5, Tamura-cho, Atsugi-shi, Kanagawa, 243-0016 JapanPhone: +81-46-296-1221Fax: +81-46-296-1238

• KoreaAnritsu Corporation, Ltd.5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 KoreaPhone: +82-31-696-7750Fax: +82-31-696-7751

• AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill, Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

1404

Printed on Recycled Paper

Please Contact:

Catalog No. MD8475A-E-A-1-(5.01) Printed in Japan 12/JUN/2014 ddcm/CDT

MX847570A SmartStudio MX847503A SmartStudio Manager · PDF fileMX847570A SmartStudio MX847503A...

Documents

Transcript of MX847570A SmartStudio MX847503A SmartStudio Manager · PDF fileMX847570A SmartStudio MX847503A...