MX12S-2SA
-
Upload
ajrojas1359 -
Category
Documents
-
view
3 -
download
1
description
Transcript of MX12S-2SA
-
flow meters solvent
Model: MX12S-2SA1/2" Oval gear flow meter designed for themeasurement of industrial solvents. Aluminium construction FEP - Teflon encapsulated seals Max flow rate 30 LPM / 8 GPM Temperatures up to 120C Accuracy +/- 0.5% (0.25% available) Available with BSP or NPT processconnections Suitable for high viscosity fluids
Select a FlowmeterStep 1.Size12 (1/2")
Step 2.FamilyS series - SOLVENTS
Step 3.Process Connection2 - NPT
Step 4.Rotor TypeS - Standard
Step 5.PulserA - Pulse Output- Reed/Hall Effect
Process ConnectionPort Size
Connection Type
1/2"
NPT
Material of ConstructionBody
Rotor
Bushing
Seal
Aluminium
316SS
Carbon
FEP (Teflon)
Technical SpecificationsFlow Range
Max Pressure
Temperature
5cps
2 - 30 LPM
0.5 - 8 GPM
2000 psi
-40 - 248F
K-Factor
Accuracy
Repeatability
Refer to Flowmeter Data Plate
+/- 0.5% (0.25% available with reduced range)
+/- 0.03%
Service Kits
Rotor Kit
Seal Kit
Part Number
MXS-12P-rotor
MXS-12S-seal
Description
Rotor set and O-ring
Meter Cap O-Ring - FEP (Teflon)
AccessoriesSS Y Strainer
Air Eliminator/Strainer
Wall Mount Adaptor
3 point cal check
Pressure test
YS012-02
N/A
MXA-12-WM
MXA-3ptcal
MXA- PRESSTEST
-
Pulser Output MX12S-2SA
PULSER OUTPUTTYPE: AStandard
The Standard Pulser Module provides 1xReed and 1 x Hall Effect (NPN open collector)switch outputs. The module is supplied with1 mtr of cable.
ConstructionMaterial
IP Rating
Mounting
Connection
Polypropylene
67
Meter Mount
5/8-18 UNF
Dimensions
Height (mm)
17 mm
Diameter (mm)
74 mm
Technical SpecificationsSwitch Type
Approvals
Pulse Output- Reed/Hall Effect
No approvals
-
-
Power Supply
Reed
Hall
Voltage (VDC)
30 VDC
4.5 - 24 VDC
Current (mA)
500 mA
7.5mA
Service KitsPart Number
MXD-AS
Description
MX Standard Pulser
-
Dimensions MX12S-2SA