MVC 4000 Preliminary Specifications - 1

2
 ENCON ENERGY CONSCIOUS INNOVATION MVC 4000 EVAPORATOR PRELIMINARY SPECIFICATIONS Estimated Dimensions Length 1040 Inches Width 288 Inches Height 408 Inches Estimated Capacities Operating Volume 5,000 Gallons Dry Weight 150,000 Lbs Operating Weight 187,000 Lbs Feed Inlet* 68.67 GPM Residue Outlet* 2 GPM Distillate Outlet* 66.67 GPM Steam Inlet Pressure system requires a 261 HP boiler for start-up and it is not included in price 30-40 PSI Start Up Steam Volume 9,467 x 1-2 hrs LBS/HR Compressed Air Pressure 100 PSI Compressed Air Volume (Peak) 220 ACFM * Assumes 97% Reduction in Volume – will need to be confirmed with water samples prior to  beginning design/build phase  Estimated Electrical Connections at 480 V/3 PH/60 Hz Full Load Amps 2,030 Amps Evaporator Skid Breaker 180 Amps Blower 1 Breaker 1800 Amps Blower 2 Breaker 1800 Amps Recirculation Pump Breaker 700 Amps Estimated Chemical Usage** Anti-Scalant 30-50 PPM Anti-Foam 200-600 PPM ** Esimates only due to no sample available for testing; actual volumes and recommended chemistry may change in full-scale operation. Mechanical Vapor Compression (MVC) E vaporators Waste Oil Evaporators Thermal Evaporators Drum Evaporators / Dryers

description

spec

Transcript of MVC 4000 Preliminary Specifications - 1

7/17/2019 MVC 4000 Preliminary Specifications - 1

http://slidepdf.com/reader/full/mvc-4000-preliminary-specifications-1 1/1

 

ENCONENERGY CONSCIOUS INNOVATION 

MVC 4000 EVAPORATOR

PRELIMINARY SPECIFICATIONS

Estimated Dimensions

Length 1040 Inches

Width 288 Inches

Height 408 Inches

Estimated Capacities

Operating Volume 5,000 Gallons

Dry Weight 150,000 Lbs

Operating Weight 187,000 Lbs

Feed Inlet* 68.67 GPM

Residue Outlet* 2 GPM

Distillate Outlet* 66.67 GPM

Steam Inlet Pressure – system requires a 261 HP boiler for

start-up and it is not included in price

30-40 PSI

Start Up Steam Volume 9,467 x 1-2 hrs LBS/HR

Compressed Air Pressure 100 PSI

Compressed Air Volume (Peak) 220 ACFM* Assumes 97% Reduction in Volume – will need to be confirmed with water samples prior to beginning design/build phase 

Estimated Electrical Connections at 480 V/3 PH/60 Hz

Full Load Amps 2,030 Amps

Evaporator Skid Breaker 180 Amps

Blower 1 Breaker 1800 Amps

Blower 2 Breaker 1800 Amps

Recirculation Pump Breaker 700 Amps

Estimated Chemical Usage**Anti-Scalant 30-50 PPM

Anti-Foam 200-600 PPM

** Esimates only due to no sample available for testing; actual volumes and recommended

chemistry may change in full-scale operation.

Mechanical Vapor Compression (MVC) Evaporators Waste Oil Evaporators

Thermal Evaporators Drum Evaporators / Dryers