MUTHU CAREER PROFILE
-
Upload
marutha-muthu -
Category
Documents
-
view
35 -
download
3
Transcript of MUTHU CAREER PROFILE
A.MARUTHAMUTHUB.E - Electrical & Electronics Engineering
PERMANENT ADDRESS COMMUNICATION [email protected], [email protected],
8/37, North street, Post Office back side MIG-II- 53, Klinga vihar, Chhend, Rourkela,
Pandamangalam Post (And) C Wing, C-306, Sector 11,
P.Velur ( Tk ), Namakkal Dist. TN . Gurudhuvara, Kalamboli, Navi Mumbai,
M..No : 8754638730================================================================================================================================================================
OBJECTIVEA.MARUTHAMUTHU result oriented professional with 13 and Half Years of experience in Tech &
Design, Sales & Marketing (Support), Business development and Project Management in the field of
Indian Switchgear Industry - LT & HT field. I have started my career as a Quality cum Design Engineer
over the years exposed to basic design in Detailed Engineering, Project Execution & Management,
Product Development, Marketing Support ( estimation, cost control, making the offer, attend the Techno
cum commercials meetings ), vendor development, procurement, contracts administration, planning,
scheduling, and up to Erection & Commissioning. My strength is, to get the project and timely completes
the project with customer satisfaction and brings the business again for satisfaction of my company and
for confirm the fixed position from the management
EDUCATIONAL BACKGROUNDS
Degree : BE - Electrical & Electronics EngineeringCollege : Annai Mathammal Sheela Engineering College
University : Periyar ( Control through Anna University )
Place of study : Namakkal Dt, Tamil Nadu, India
Class & Percentage : First Class - 76%
Year of Passing : 1998 – 2002
School ( HSS - 12th ) : Government Higher Secondary School Class & Percentage : School First – 1041 / 1200 ( 86% )
Place of study : Namakkal Dt, Tamil Nadu, India
Award : My school was encouraged & given of Rs 20,000 certificate and
Every month has given the stipend of Rs 400 for degree studies
Year of Passing : 1997 – 1998
School ( SSLC - 10th ) : Government Higher Secondary SchoolClass & Percentage : First Class – 367 / 500 ( 73% )
Place of study : Namakkal Dt, Tamil Nadu, India
Year of Passing : 1995 - 1996
PROJECT & INPLANT TAINING– ITC CHENNAI IN SOUTHERN RAILWAY
Page 1 of 14
I have done the final year project of “BELT GRADING” and have submitted to Southern Railway at Integral Coach Factory ( ITC ) in the department of Technical Training Centre in Chennai by using 8085 Microprocessor. The project has been used in Integral Coach Factory at Southern
Railway in Perampur at Chennai
KADAM PARAI Power Plant NearPollachi, TN, India – One Week.
KUNDH Power Plant near OOTY, TN, India – One Week.
NEYVELI Thermal Power plant, Neyvali TN, India - One Week.
EXPERIENCE BACKGROUNDS FROM PAST TO PRESENT
COMPANY : M/s. WELMECH ENGINEERING CO PVT LIMITED – CHENNAI.POSTING : ENGINEER – QUALITY INCHARGE
SALARY : Rs 3000 / - ( Take Home ) + allowances / per Month
PERIOD : 01 / 08 / 2003 to 30 / 08 / 2005
M/s Welmech Engineering Co Private Limited, Chennai, is leading manufacturer of industrial
furnaces and Ovens with all the Panels. It has a variety of project portfolios from new furnace design,
detailed engineering, installation, testing and commissioning in India and overseas. It is a ISO 9001-2000
Company.
ROLES & RESPONSIBILITIES
Incoming Inspection
Have conducted the incoming inspection based on received the goods as per clearance with the
BOM, PO, Drgs of equipments along with Amendment Order if any. After that, have inserted the
respective tags. Then, Prepared the Incoming Inspection Report and GIN (Goods Inward Note).
After the incoming inspection completed, visual checking, testing for all types of induction Motors,
VT & CT, PLC, ( VFD ) Drives, Casting, Controllers, Switchgears, Relays, Thyristors,
Thermocouple, RTD, Conveyors, Blower, Panel enclosures, Hydraulic cylinders & Platform,
Castings and MS & SS sheet metals, After that, collected the Test Certificates & made the
Certificates for all the bought out items based on what we have conducted testing.
Stage Inspection
During manufacturing progress, I have checked and made the reports of every stage of progress
of furnaces and it’s panels likes, related to fabrication, assembling section of furnaces & and it’s
control panels based on the approved documents of BOM, GA, Schematic Diagrams. Every day I
have done this stage inspection and kept the reposts on projects vise
`Final Inspection
After the completion of manufacturing process of furnaces & control panels, I have done the final
inspection likes, related to check the critical dimensions of furnaces & control panels based on
the approved the drawings
After that, I have participated in the final cum customer inspection with the customer and have
taken interaction for getting dispatch clearance for dispatch the equipment
Page 2 of 14
Then, I have prepared packing slip, as built drgs and documents etc, and have given the final
approval for dispatch for furnaces and it’s panels
COMPANY : M/s. EASUN REYROLLE LIMITED ( SWITCH GEAR DIVISION ). CHENNAIPOSING : DESIGN ENGINEER
SALARY : Rs 7000 / - ( Take Home ) + allowances / per Month
PERIOD : 15 / 09 / 2005 to 30 / 10 / 2007
M/s Easun Reyrolle Ltd (formerly known as Eswaran & Sons Engrs Ltd) Chennai, It is having
the two manufacturing Switchgear division and Relay division. It is leading manufacturer of Switchgear all
types of VCBs, Control & Relay Panels and Relays, Meters. Its customers are in India and overseas. It is
a ISO 9001-2000 Company.
ROLES & RESPONSIBILITIES
After I have received the Technical document, which are the documents required for getting the
approval, those documents has prepared and done, like, GA, BOQ, SLD, Scheme detailed
engineering documents.
Based on the approval documents, I have prepared the Fabrication drgs for assembly, Parts ,
sheet metal calculation and its BOM, for the project execution. All the documents have submitted
to Internal & External Customers & Contractors as per contract specification of VCB and its
Control & Relay Panel with equipment layouts. This includes VCB fabrication & arrangement
details, CT & PT fixing, Bus Bar calculation, schematic wiring drawings, location of insulators,
division of compartments
I have involved the internal & external auditing of ISO & updating the all the ISO documents
After released documents to all the departments, i have co-operated with the Purchase,
Production, QC, & Testing / Serving departments for technical requirements
I have implemented & updated the BOM & drawings details, fabrication schedule by using in ERP
& prepared the wiring diagram by using the PC Schematic software also
COMPANY : M/s. SYMATIC ENGINEERING PVT LIMITED. NAVI MUMBAI.POSING : Sr Engineer in Design and development and R&D
SALARY : Rs 22,000/ - (Take Home) + 1 BHK Accommodation flat / per Month
PERIOD : 15 / 11 / 2007 to 30 / 05 / 2011
M/s Symatic is the System house and main vendor of Siemens. It has four manufacturing units
and Marketing & Design Division in Mumbai. It is leading manufacturer of LT Panels & HT Panels. All
types of LT Panels in LT and HT VCB Panels, Control & Relay Panels, Metering Panels, LT & HT Bus
duct, Compact Sub Station. It is a ISO 9001-2000 Company.
ROLES & RESPONSIBILITIES
Page 3 of 14
I have involved and in charge of Details Engineering and Documentation of projects. I have prepared
the GA, Assembly, Power & Control Circuit , Bill Of Materials ( Through ERP ) has sent for the
approval from the Customers
I have developed and involved the R&D of LT and Ht Bus duct, Metering Panels, Compact Sub
Station and made the standardization. Product Manual & Catalogue preparation for future and to
send to CPRI Testing & maintenance of control the records & manuals. I have conducted the Project
review meeting regarding discussion of approval and manufacturing process etc.
I have supported to Marketing Dept in the form of Estimation, Making the Offer, Tender typical drgs
along with Bought Item List ( through ERP ), and attend the Techno cum commercial meeting with
clients. I have conducted and the marketing review meetings.
After Getting the Approval, i have prepared the Fabrication Schedules & Drawings, Detailed power &
Control Circuits, Components Fixing Detailed drawings Assembly part drawings, Wire & Ferrules
Schedules, Terminal Blocks Detailed Connections
Drawings responsibilities (received from design head office), Check the drawings & committed to
approval the drawings for manufacturing activities, ( if fab. Drawings, check & directly to given to
manufacturing ).[
MILESTONE PROJECTS AFTER BECAME A SENIOR LEVEL IN “ SYMATIC “ PROJECT – 01, HT, LT Bus Duct & Panel M/s Alok Industries Ltd in Silvassa
Done the Estimation and got the order of Rs 45 Lakhs segregated, metal enclosed LV & HT Bus duct
55mtr with MCC Panel. I have done the detailed engineering of civil & duct routing with the location
of LV Panel to Transformer, MV Panel to MV Panel and got the approval.
Done the fabrication documents of Detailed Assembly, Scheme Development with parts drgs, and
BOQ of sheet metal cum switchgears. Co-ordinated with the production, purchase department up to
completion of customer inspection in our shop floor.
Independently, I have done the 100 % of erection and commissioning the bus duct & I have the
documents for that
PROJECT – 02, 33kV HT Bus Ducts Customer : Tata Power Receiving Station, Mumbai. Done the Estimation and got the order of Rs 35 Lakhs segregated, metal enclosed bus duct 20mtr
with 2 set of VCB Adaptor panel enclosures. I have done the detailed engineering of civil & duct
routing with the location of Transformer to MV Panel and connected to existing Panels with help of
adaptor enclosure and got the approval.
Done the fabrication documents of Detailed Assembly, Scheme Development with parts drgs, and
BOQ of sheet metal cum switchgears. Co-ordinated with the production, purchase department up to
completion of customer inspection in our shop floor.
Independently, I have done the 100 % of erection and commissioning the bus duct & I have the
documents for that
PROJECT-03 : 33kV Kiosk Panel Customer : TATA Power A/c in Siemens
Page 4 of 14
I have done completed the R&D and got the order of 33KV Out Door ( Kiosk ) Panel cost of 29
Lakhs. This panel is fixed type VCB for the application of Transmission and Distribution in the Power
plant. I have done detailed R&D, Detailed Engineering, including the Fabrication, Scheme
Development.
Other Projects Siemens Ltd Kalwa, Mumbai
40 Lakhs of 33kV Outdoor VCB Panel – 05 Nos, 33kV Metering Panel – 03 nos ( For Ms Power
Protection Hyd & Venture Automotive Tooling (I) Ltd ) and CRP panels like Simplex & duplex,
Dummy & interposing, Concentrator Panels.
I have done the R&D, Details engineering & fabrication drgs, scheme drgs for the Compact
Substation System. This is our new product and it is modular with bolted design
CENTRAL GOVT MILESTONE PROJECTs I have done the estimation and prepared the engineering documents of Site layout and location of
transformer, DGs, LT and HT Panels with Draw out type Potential Transformers, AB switches,
Laying of HT 11KV UG XLPE cable with routing through RCC trench and cable tray & it routing of
3600 Mtrs in three locations in the site. I have prepared the installation drawings, detailed
installation procedure documents. Based on participated in the Tender committee meeting and
came to L1 with projects.
Tender in ICF-Southern Railway Head Quarters Chennai at Tamil Nadu TENDER Notice No. ICF/EL/Cons/2012-13 dt. 23.07.2012
Tender Agreement Ref :- EL/W/637
Nature of Works :- Replacement of overaged H.T. BOCB Panels with HT VCB
Panels in the Sub- Stations SS/8 & SS/18 in Shell Division
Tender Agreement Ref :- EL/W/633
Nature of Works :- Replacement of over aged H.T. OCB Panels with HT VC Panels
at E – Shed (SS/6) and J – Shed (SS/7) and DG Room in Shell Division
And Other Tenders :- EL/W/479, EL/W/507, EL/W/508
Nature of Works :- Supply, Erection of HT & L.T. Panel Boards, Draw out PTs, CTs,
Pin Insulators & DISC Insulators 11kv, AB switch 9 insulator type 11KV, DP Horn gap fuse & DO
Horn gap fuse, 11KV lighting Arresters with sufficient rubber mats & danger plates and Structure
with Civil Works
Tender in Southern Railway Division Tiruchchirappalli at Tamil Nadu Tender Agreement Ref :- T/E. 29/I/HT 11 KV VCB Panels/TPJ/OT/2009
Nature of Works :- Supply, Erection and Testing and Commissioning of HT 11kv
VCB panel Including laying of HT 11kv UG XLPE cable at Tiruchirappalli in TN
Tender in South Central Railway Division Tirupati at Andhra Pradhesh
Tender Agreement Ref :- Tender No- CRS/E.03 /2009-10
Page 5 of 14
Nature of Works :- Improvements to Existing L.T. Panel Boards at (NUSS) north unit
Sub Station and Supply, Erection of Draw out PTs, Pin Insulators & DISC Insulators 11kv, AB
switch 9 insulator type 11KV, DP Horn gap fuse & DO Horn gap fuse, 11KV lighting Arresters with
sufficient rubber mats & danger plates and structure with Civil Works
The said project, I have involved in the marketing and up to completion of projects with the
completion certification without penalty.
COMPANY : M/s. MARINE ELECTRICALS (I) PVT LTD - MUMBAIPOSING : Asst Manager – TECH, DESIGN & DEVL, MARKIETING SUPPORT - MV & LV
SALARY : Rs 45,000 / - ( Take Home ) + 1 BHK Accommodation flat / per Month
PERIOD : 01 / 06 / 2011 to 25.05.14
M/s Marine Electrical is the System house of Schneider Electric & Leading manufacturer of
Marine Application Panel, LV & MV with Automation business. Marine Electricals having the marking &
service offices in all over India & Abroad. It is a ISO 9001-2000 Company.
ROLES & RESPONSIBILITIES In charge of Tech Design & Development – MV Business and signing authority of engineering
documents likes, execution, detailed engineering of layout drgs, scheme drgs, PLC & and related to
instrumentation drgs, fabrication drg of panel, structural drg,
Marking Support for MV & LV Business. My Role is attending the Techno cum Commercial Meeting
with clients. Estimation, Cost Control, attend the vendor, supplier, marketing cum project review
Meetings. I have developed and done R & D of new products of Ht, LT – Metering Panels & Bus
ducts, DC Drives Panels, Compact Sub Station, Isolator Panels
Main involvement of Making & preparation of detailed engineering drgs like Assembly & Fabrication,
Circuit drgs of up to 33kV HT panels ( VCB, SF6, RMU ) with its Control & Relays panels, and LT
Panels ( PCC, PMCC, IMCC, MCC, VFD, DC Drive, APFCR, PLC, Annunciation & Instrument, Test
& console, control desk, PDB, MLDB, SLDB ). First date of every Month, and conducting the PRM
( Project Review Meeting ) meeting, Giving the seminar for Technical description about the projects,
standardization, documentation and information about the erection and commissioning to our Sale,
Project, & Service team.
PROJECT- 01 33kV HT & LT Panels Customer : Dharni Sampada Pvt Ltd – MumbaiI have done the Techno com Commercial Meeting and I got the 64 Lakhs Order of 33kV VCB & Metering,
Load Brake Switch Panels and LV with Automation Panels. It is a export order for their Iviry Coast mining
project I have done the estimation, client meetings, technical meeting and prepared the design
documents and Layout drawing for HT & LT Panels layout drawings, location of LT and HT Panels. I have
prepared the installation drawings and installation procedure documents.
MY ROLES AND RESPONSIBILITY FOR THIS PROJECT
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for LT Panels.
Page 6 of 14
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for HT Panels.
I have participate and done the inspection in the both panel builders along with customer, after
that I have given the dispatch clearance.
PROJECT- 02 : HT & LT Panels Customer : UP Jal Nigam Water Treatment ProjectI have done the estimation and prepared the Tender Documents of Layout of HT & LT Panels layout
drawings, location of LT and HT Panels. I have prepared the installation drawings and installation
procedure documents. Based that, I have participated in the Tender committee meeting and came to L1
and I got the 50 Lakhs ( For 25 Lakhs LT Panels – 07 Sets & For 25 Lakhs HT Panels – 07 Sets ).
MY ROLES AND RESPONSIBILITY FOR THIS PROJECT
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for LT Panels – 07 Sets for Seven locations from UP Jal Nigam – Meerut
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for HT Panels – 07 Sets for Seven locations from UP Jal Nigam – Meerut
After getting the order, I have released the LT Panel order to Emco Switchgear – Chandigarg
After getting the order, I have released the HT Panel order to Pristine Switchgear – Pune
I have participate and done the inspection in the both panel builders along with customer, after
that I have given the dispatch clearance to UP Jal Nigam – Meerut
I have attend the site works for installation, testing and commissioning of LT and HT panels
PROJECT-03 : Turnkey Project Samundra Inst. Of Maritime Studies Singapur/MumbaiIt is a Turnkey Project of Automation, MDB, Electronic Consoles, and Cable and Cable trays and office
accessories like Plasma TV ( 50” ), PCs and IT Equipments. The project volume is 40 Lakhs. I have done
the estimation and prepared the Tender Documents of Layout of Civil cum Electrical layout and indicated
the location of all the items. I have prepared the installation drawings and participated in the Tender
committee meeting and came to L1 and I got this order.
MY ROLES AND RESPONSIBILITY FOR THIS PROJECT
I have prepared myself for detailed engineering drawings and I got the approval along the project
schedule time table
I have executed as per the project schedule as per the customer project schedule time.
PROJECT-04 : LT & HT Panels Customer : M/s Arken Solution - BangaloreI have done the marketing support in terms of estimation with attend the techno cum commercial meeting
with client and I got the order of 78 Lakhs for LT and HT Panels.
MY ROLES AND RESPONSIBILITY FOR THIS PROJECT
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for LT Panels
I have prepared myself for detailed engineering drawings for GA, BOM, SLD and Scheme Drgs
and I got approval for HT Panels
Page 7 of 14
I have participate and done the inspection in the both panel builders along with customer
I have attend the site works for installation, testing and commissioning of LT and HT panels
And other MILESTONE PROJECTs
Michelin Type Tamilnadu Pvt ltd – India Operation. They are coming to start the manufacturing
plant in Utthukottai, Thiruvalluvar Dt, Chennai India. Customer estimation of the project of Rs 40
crore and 900 acre project for Phase -1 and phase -2 ( not started yet ). Our scope of works, supply
the LT & HT panels and bus duct, cable trays and erection and commissioning of all equipments. I
have fully involved with technical cum commercial discussion with the Customer and Main Vendor of
Tebodin and M+W group – Hyderbad. I have involved the top to bottom ( marketing, execution of
project and inspection ). Now am involving the erection and commissioning the panels and bus
ducts. ( duration project of Phase -01 is 1-1/2 years.
I have done the marketing with technical discussion with Ultra Tech Cement Limited in Hirmi Cements Works at Raipur ( C.G ) got the Rs 30 Lakhs of Orders of LT Panel and executed the 3
Panels of fully double front, bolted type panel design and same like this Rs 30 Lakhs of Orders of LT
Panel fully double front, bolted type. I have done erection in Monnet Group Energy and ISPAT LTD In RAIGARG ( C.G ).
I have done the marketing, technical discussion with the customer, got the some order from as follows
Emami Cements Ltd, Batranj Steel and Power Ltd, Bilai Engineering Corporation Limited ( BECL ), Kwality foundries Limited, Prakash Industries Limited, in Raipur ( C.G ), M/s Gactel Turnkey Projects Ltd for KDMC, M/s Blue Star Ltd for M/s MGM Hospital Mumbai, M/s Gactel Turnkey Projects Ltd for M/s Gujarat NRE Coke Ltd, M/S Sesa – Goa Ltd, M/s Lubin Ltd Mumbai, M/s Crescent Combustion System P Ltd for Bharat Heavy Electricals Limited, Trichy TN.
Mall Enterprises / Envirotex for MSEB, M/s Ramky Infrastructure Ltd (STP + PS1 ) for Thane Municipal Corporation, M/s Organic Recycling Systems Pvt Ltd for Solapur Bioenergy System M/s Aireff Detox Ltd for ONGC Assam & & SAIL – Rourkela,
M/s Gactel Turnkey Projects Ltd for M/s Vandana Vidhyut Ltd. M/s Konstelec Engineers Pvt Ltd for Dr. Achrya Laboratories Mumbai, M/s Kadam Environmental – Vadodara for M/s Berger Paints I Ltd
COMPANY : M/S. RELIABLE GROUP OF COMPANIES – MUMBAI / ROURKELAM/S. RELIABLE HI-TECH INFRASTRUCTURE PVT LTD
POSING : Manager – TECH, DESIGN & BUSINESS DEVELOPMENT
SALARY : Rs 65,000 /- ( Take Home ) + 1 BHK Accommodation flat / per Month
PERIOD : 30 / 06 / 2014 to Till Date
Reliable is the System House of Siemens. The company is having the business in Project and
Construction Division, Panel Division, Reliable Sponge, Steel Plant, Galvanizing Plant. It is 1000 Crore
Turnover Company and it is a Project and Construction contractor approved, having regular projects from
Page 8 of 14
SAIL in all units. Manufacturer of Steels, TMT bars, Structural and LV and MV Panels. Four
manufacturing units, Project and Construction Division are in Rourkela in Orissa. Reliable Group is having
the Marketing & Services offices in all over India.
ROLES & RESPONSIBILITIES
Head of Electrical & Business Development. My role is handling the technical, design team, signing
authority of engineering documents. Second role is Business Development and supporting to
Marketing for MV & LV and Turkey Project business. Execute and Control the Design and Estimation
for turnkey project and attend the techno cum commercial meeting with clients; and vendor, supplier
for inspection with negotiation of our requirements
Prepare the estimation, engineering documents for attend the tender openings. Then attend the
technical bid, commercial bits with SAIL and other clients. Mostly I am participating projects and
tender meetings with all SAIL units, especially Rourkela Steel Plant, Chandrapur Ferro Alloy Plant,
Bhilai Steel Plant, etc
MY CURRENT PROJECTs Milestone Project – 01
SAIL - Chandrapur Ferro Alloy Plant SAIL at Chandrapur – Nashik, Maharastra
Project : Inst. of 45 MVA Submerged Arc Furnace – Raw Material Handling Facilities: (Pkg-TK 02)
Scope : Turnkey basis of Electrical, Mechanical, Structural and Civil. Supply, installation of
Transformer, DG sets, Air Blaster & Receiver, Cable tray, Cabling with Routing, LT & 3.3kV HT Bus ducts
Conveyor, Earthing & Lightning Protection System, Fire Fighting Alarm, High mast & Poles with Lighting
Fixtures and Illumination System, Magnetic Separator, Motors, UPS, Battery with Charger Unit, Hopper
Weighing, Hoist , HT Panels, PCC, PMCC, MCC, MLDB, Control Desk , SDB, DC Drive panel, PLC,
Instrumentation and Automation, Network and Telephone System, Fire detection& Alarm, HVAC.
List of my achievement and Performance certificates from SAIL – CFP Chandrapur
In Mechanical, Electricals, Civil, Structural, I have contributed in drawn, designed, calculation, got the
approval from CET Ranichi / CFP Chanrapur and executed in our factory and CFP Site as follows. For the
above, I have proof of documents and details with me. Listed as below
Modification of Siemens Siepans PCC, MCC-01, 02 & 03 Electrical
This is project fully based on Instrumentation, PLC & Automation. But In 2014, RHIPL have
supplied the above said panels in Manual Operation not PLC mode. After Join in this come
from last one year, I have my hard work; I made all the in PLC & Automation Detailing
engineering in GA, SLD, BOM. Power & Control Circuit with PLC Modules selection, DI/DOs
selection for the above said Panels & Systems for following panels
o Siemens Siepans PCC, MCC-01, 02 & 03
o Siemens type Aux Relay Panels, RIO Panel, and Dry Fog Dust Suppression System PLC
Panel.
o Main & Sub PDBs, Main & Sub WDBs, Main LDB & Emerg. LDB, SLDB – 20
o VFD, Vibrating Grizzling Panel, DCEM Brake Panel, Soft Starter Panel
Page 9 of 14
Drawn, Desiged & Calculation of Cable & Trays
o Power, Control and Instrumentation Cable Schedule
o Power & Control Cable Tray layout for entire plant
o Lightning & Socket Cable and it’s Bill of Materials, Sockets, Lighting Fixtures,
o LCS, LPBSs, Local Junction Boxes ( LJBs ) and Power & Control JBs
Drawn, Desiged & Calculation Festoon System & CRD and it’s Cable Mechanical
o Detailing of Festoon System for Shuttle Conveyor & Trolleys of 33, 34,35, 36, 37, 38, 39,
40, 41 & 42 and Tripper Trolley for BC – 31
o For the above Control Panel & JBs
Drawn, Desiged & Calculation PCC, MCC – 01 to 03, LT Panels & JBS Civil & Structural
o Detailed Panel Lactation layout details in LTSS, Day Bins, Fines Bins, Ground Hopper,
Screen House, Furnace Building. This detailed engineering contains mechanical, civil,
and structural detailed included.
Drawn, Desiged & Calculation Saftety Switches & LIP Panels
o Based on the all the conveyor length, I have selected / calculated & done the detailed
BOQ of Safety Switches- PCS, BSS, ZSS, Proximity Switches, Termination Modules,
Simulation Modules, Rope, Clamp, LIP – Location Indication panels for lengthy
conveyors
For this I have released given the PO and negotiation with the supplier
Panels
o Sliding Contacts, Bought out Switchgears Order Value = 2 Lakhs
o Aux Relays panel 01 & 02 Order Value = 5 Lakhs
o DFDS PLC Modules + PLC Panel Order Value = 6 Lakhs
Safety Switches & LIP Panels
o Safety Switches- PCS, BSS, ZSS, Proximity Switches, Termination Modules, Simulation
Modules, Rope, Clamp, LIP Order Value = 13 Lakhs
Festoon System and it’s Cables, Cable Reeling Drum Order Order Value = 26 Lakhs
Milestone Project – 02
M/s Reliable Spange Pvt Ltd In-House Plant Project
Project : 4 Nos of New Tempering Furnace and It’s HT & LT Substation installations
My Roles & responsibilities the following projects
Page 10 of 14
Attend the Technical Bid and Commercial Bid and do the estimation with prepare tender
documents, tender drawings. Prepare the detailed project schedule with planning schedule of
stage wise progress.
In charge of electrical related design & development and estimation. Attend the technical
discussion with client, vendor, supplier and do the negotiation and prepare detailed plant layout,
panel and equipment installation details engineering, cable schedule & sizing, bus duct design
with detailed routing layout drgs, substation, details and it’s control room design etc.
Attend the site visit and project review meeting with client, update the project stage to client & my
management regarding project status, material status, inspection, attend the testing &
commission of panels, transformer, cable tray routing, instrumentation & automation with PLC
Attend the meeting, inspection with the supplier, vendor for project requirement, do the
negotiation after the release the indent ( PO )
Design & detailing of 33kV VCB Panels Electrical
o Detailed Engineering of 33kV Switchboards 1 I/C + 4 O/Gs & IC/O/G Panels
o Siemens 33kV VCB trucks – 6 Sets Order Value = 23 Lakhs
o CTs & PTs, Insulators, Metering & Protection, Cu Busbar Order Value = 8 Lakhs
o Detailed Engineering of 33kV HT Capacitors Systems for 2 Plants
33kV, 242 kVAR Capacitor + 6% Reactor 2 Set
33kV, PCVCB + Control & Relay Panels 2 Set
RVT & 33kV Outdoor CTs 2 Set
33kV Isolators + Fuse Units, 2 Set
Order Value = 18 Lakhs
Design & detailing of PCC, MCC-01, 02 & 03 Electrical
Detailing engineering in GA, SLD, BOM Power & Control Circuit with PLC Modules selection,
DI/DOs selection for the above said Panels & Systems for following panels
o PCC, MCC-01, 02 & 03, VFD, Soft Starter Panel
o Main & Sub PDBs, Main & Sub WDBs, Main LDB & Emerg. LDB, SLDB – 20
Drawn, Desiged & Calculation of Cable & Trays
o Power, Control and Instrumentation Cable Schedule
o Power & Control Cable Tray layout for entire plant
o Lightning & Socket Cable and it’s Bill of Materials, Sockets, Lighting Fixtures,
o LCS, LPBSs, Local Junction Boxes ( LJBs ) and Power & Control JBs
roject : 01 Installation of Additional Heat Treatment Facility (Pkg-03) in Special Plate Plant
Contract No : P / 4 / 257 / 19001 / 30 / 13040918, Dated- I 4.02.2013
Scope : Turnkey basis of Electrical, Mechanical, Structural and Civil. Supply, installation of
Transformer, DG sets, Air Blaster & Receiver, Cable tray, Cabling with Routing, LT & 11kV HT Bus ducts
Conveyor, Earthing & Lightning Protection System, Fire Fighting Alarm, High mast & Poles with Lighting
Page 11 of 14
Fixtures and Illumination System, Magnetic Separator, Motors, UPS, Battery with Charger Unit, Hopper
Weighing, Hoist , HT Panels, PCC, PMCC, MCC, MLDB, Control Desk , SDB, DC Drive panel, PLC,
Instrumentation and Automation, Network and Telephone System, Fire detection& Alarm, HVAC.
Project : 02 340 / Coke, Contract No : 042/340/1492000214/72, DATED:17.07.2015
Scope : VVVFD, Drive, Panels with VFD Drives, 10 Sets of MCC & Control Desk, C&R panels
Project : 03 Installations of New Hot Strip Mill / Construction Power Facilities – Turnkey Basis
Contract Ref : CET / 05 / RK / 3379 / TS / EE / 01 / R = 0, February – 2015
Scope : Turnkey basis of Electrical, Mechanical, Structural and Civil. Supply, installation of 33kV /
6.6kV Substation and it’s includes 33kV / 6.6kV, 4MVR, Transformer, 33kV Isolator Switch Board , 6.6kV
Switch Board, HT Panels, PDB, MLDB, Control Desk , SDB, PLC, Instrumentation and Automation,
Cable tray, Cabling with Routing, 11kV HT Bus ducts, Earthing & Lightning Protection System, Fire
Fighting Alarm, High mast & Poles with Lighting Fixtures and Illumination System, UPS, Battery with
Charger Unit, Network and Telephone System, Fire detection& Alarm, HVAC.
Project : 04 Up gradation & Automation of Lime Kiln Control No-5 at Lime Dolomite Brick Plant
Contract Ref: 340/K5PLC/2011/01 Dt : 04 / 02 / 11
Project : 05 Strengthening of Water Treatment System at Rolling Mill Pump House
Contract Nos : CET/05/RN/3265/TS/UT/01/R=2 JANUARY 2013
Scope : Turnkey basis of Electrical, Mechanical, Structural and Civil. Supply, installation of
Transformer, DG sets, Air Blaster & Receiver, Cable tray, Cabling with Routing, LT & 11kV HT Bus ducts
Conveyor, Earthing & Lightning Protection System, Fire Fighting Alarm, High mast & Poles with Lighting
Fixtures and Illumination System, Magnetic Separator, Motors, UPS, Battery with Charger Unit, Hopper
Weighing, Hoist , HT Panels, PCC, PMCC, MCC, MLDB, Control Desk , SDB, DC Drive panel, PLC,
Instrumentation and Automation, Network and Telephone System, Fire detection& Alarm, HVAC.
Project : 06 ORE Bending & Blending Plant / Silicon Steel Mill Plant at SSM
Contract Ref : CAL/IA&DT/AVM/FY11/OBBP/T1, Dt : 17.05.2011
Scope : Turnkey basis of Supply, installation of Digital DC Drive System with Panel for Barrel
Reclaimer at OBBP
Project : 07 Turnkey Basis, CIivil, Structural, Mech, Electricals, PLC & Automation for Up gradation of
Blast Furnace – 01 / BF1-BF&CH-3170-EPIL-IRD-2010 at Rourkela Steel Plant &
Customer : M/s Essar Projects (India) Limited, Gujarat
Project : 08 Turnkey Basis, CIivil, Structural, Mech, Electricals, PLC & Automation for SMS-I & II &
SSM at Rourkela Steel Plant
Project : 09 (01/DE/3514)Dev. of Bldg. & Infrastr. (PKG.-1) for seting up of static Facilities for
Environmentally sound mgmt. of PCB at Bhilai Steel Plant, Bhilai.
Project : 10 Turnkey Basis, CIivil, Structural, Mech, Electricals, PLC & Automation for A/T No.
P/PROJ/243(TK-04)/1490000118/16049020 Dated -20.04.2016 for the work of
Modification /Replacement jobs for CHSGP of BF#1(pkg. no. TK-04) at SAIL – RSP
Page 12 of 14
Project : 11 iPMCC for Cooling Tower at CPP-1 at Rourkela Steel Plant
Tender No: 042/387/1490000103/R-1/86 dtd 15.09.2015
Projects : 12 : SAIL - Kiriburu Iron & Ore Mines, Jhargand / LT MCC ( Outdoor Type ( Kiosk ) ) / PDB
Order/ Tender : KM/PUR/218/049615213036/200, DATE:20/02/2016
Projects : 13 : M/s Essar Projects (India) Limited / SAIL, Rourkela Steel Plant, Rourkela.
Up gradation of Blast Furnace – 01
Essar PO : CS02 / MM4 / 2900001669 Date : 03/08/2016
Requirement : FRP Power & Control junction Boxes Order Value : 7.5 Lakhs Scope : Turnkey basis of Electrical, Mechanical, Structural and Civil. Supply, installation of
Transformer, DG sets, Air Blaster & Receiver, Cable tray, Cabling with Routing, LT & 11kV HT Bus ducts
Conveyor, Earthing & Lightning Protection System, Fire Fighting Alarm, High mast & Poles with Lighting
Fixtures and Illumination System, Magnetic Separator, Motors, UPS, Battery with Charger Unit, Hopper
Weighing, Hoist , HT Panels, PCC, PMCC, MCC, MLDB, Control Desk , SDB, DC Drive panel, PLC,
Instrumentation and Automation, Network and Telephone System, Fire detection& Alarm, HVAC.
TECHNICAL SKILLSI am learning and having the knowledge of the following hardware & software, PLC, Instrumentation with
Automation. I am handling and involving the automation turnkey projects for various customer
PLC (Programmable Logic Controllers)
Allen-Bradley, Siemens ( S7 300 ), ABB ( SL 500 ), GE-Fanuc (GE – Fanuc 9030 Series ),
Omron – ( SYSMAC CPM2A ), Keyence ( KV-24R Ladder Builder )
SCADA (Supervisory Control & Data Acquisition)
Wonder ware ( In touch Software Version 9.5 ), Intellection ( Fix 32 Software Version 7.0 )
DCS (Distributed Control System)
ABB – AC 800 M : PLC Control Builder AC 800 m ( Model : AC 800 m)
MMI Programming Designer & SCADA
SIEMENS HMI (Human Machine Interface): Configuration of Operator panel (HMI) using WinCC
flexible. Programming and Interfacing of HMI with S7 300 PLC.
Communication Protocols (Ethernet, Modbus, Profibus, Optical Modbus)
Variable frequency drive and pneumatics & Field Instruments Pneumatics–ON/OFF Solenoid
valves, Piston Displacements, Control valves and Actuator. (With field instruments as i/p
converter, Level and flow Transmitter, RTD, Thermocouple) Selection of ABB & Schneider VFD
based on loads, VFD wiring to load and parameter selection of VFD
P&FI (Pneumatics & Field Instruments)
Pneumatics - On/Off Solenoid valves, Piston Displacements, Control Valves, and Actuator.
Field Instruments - IP Converter, Level Transmitter, Flow, Transmitter, RTD, Thermocouple,
Proximity Sensors, PID controllers
Proficient of MS Office and Auto Cad & Expert in 2D & 3D, Solid Works 2006, Pro/E
Page 13 of 14
Proficient of PC schematic-2006, Used for preparing Electrical circuit drawing, BOM etc.
Proficient of ERP software for total management (Preparing reports through system BOM,
purchase, inspection, stores.) Reduce the unwanted paper works
PERSONNAL PROFILE: Father Name : A. M. Andiappa Pillai ( Late )
Mother Name : V.Periyammal
Date of Birth : 05 / 06 / 1980
Sex : Male
Marital status : Married
Nationality : Indian, Hindu ( Soliza Vellar )
Languages Known : Tamil, English, Hindi, Marathi
Hobbies : Reading, Writing, Travelling & Net
Future career goal : To become a “Technical Director” in Reputed company
PAN Card No : AVGPM8719H
About my Family : Five Brothers, One Sister. All are married and settled in
My native and they are formers except me.
FOR YOUR KIND REFERENCE
Current CTC : Rs 65,000 ( Home Taken ) + 1BHK Accommodation
Rs 8,50,000/Annum
Expected CTC : Will be discuss on the face to face meeting
Date Of Joining : One Month From The Date Of Appt Letter
Expected Posting : Manager ( Overall Operations )
Job Location : Anywhere in India
DECLARATIONThe above said statements, copies of documents are true and complete with the best of my knowledge &
belief. I am expecting your positive response and guidance for my future progress.
Thanking you, Yours Technically,
Place : A.MARUTHAMUTHU
Page 14 of 14
Date : _ _ / _ _ / _ _ _ _ 8754638730
Page 15 of 14