Municipal Tractors July, 2020 Discount off List Pricing ...
Transcript of Municipal Tractors July, 2020 Discount off List Pricing ...
T-652Municipal Tractors725-720
Municipal TractorsDiscount off List Pricing
Specification 5.0
July, 2020
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Email Address:
Spec. Number Information Requested Answer
5.1 MANUFACTURER: STEINER
5.2 DATE OF PRICE LIST/CATALOG: 7/30/2020
5.3 PERCENTAGE DISCOUNT FROM LIST PRICE BASE UNIT: 21.50%
ATTACHMENTS: 21.50%
5.4 PRICE FOR ADDITIONAL MANUALS (Note: One of each included in purchase at no cost, per specs)ADDITIONAL SERVICE MANUAL
Digital 275.00$ Paper 275.00$
ADDITIONAL PARTS MANUAL Digital 125.00$ Paper 125.00$
ADDITIONAL OPERATIONS MANUAL Digital 40.00$ Paper 40.00$
5.5 STANDARD WARRANTY: (Hours, Months, Years) 2 YEARS
5.6 PERFORMANCE/ WARRANTY OPTIONSUse this section to offer performance/warranty options.Use as many lines as needed.(Specify years, miles or hours extended term covers.)
$$$
5.7 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: $Weekly Rental Rate: $
Monthly Rental Rate: $Percent (%) of Rental Fee applied to purchase price: %
5.8 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price $10.00
5.9 DELIVERY STARTING POINT - City, State, ZipCity: Shakopee
State: MNZIP: 55379
Price Per Loaded Mile:
$2/MI + DESTINATION CHARGE ON THE LAST PAGE OF PRICE PAGES
Minimum Delivery Charge (If Applicable): $
5.10 INSTALLATION - PER HOUR (Hourly Shop Rate):(Installation services may be requested on an "as needed" basis.) $125.00
5.11 PRICE FOR SET OF FLUID AND AIR FILTERS (if applicable) $45
SCOTT FAHEYLANO EQUIPMENT, INC. SHAKOPEE
952-445-6310SHAKOPEE, MN 55379
3021 133RD ST W
All Prices in U.S. Dollars Page 1 of 39
THE FOLLOWING UPDATES HAVE BEEN MADE TO THIS DOCUMENT:
Date Description of Change
7/1/2020 Created Steiner Price List
*Certain Specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Steiner
equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
Steiner Price List
Steiner MSRP Price List
2020 Price Book
BOBCAT COMPANY PRICE PAGES
Steiner® MSRP Price List Please note the following when using Steiner Price Pages: - All prices are shown in U.S. dollars.
All Prices in U.S. Dollars Page 2 of 39
Hitch Front - Steiner® Quick-Hitch System Rear - Standard 2" receiver hitch
Frame Oscillating Articulating
Transaxles (2) Peerless® 2600 dual-range
Brakes Single, mechanical disc
Forward / Reverse Foot Pedal Control
Weight Transfer Hydraulic (on the fly adjustments) Warranty - 2 Years
Unit weight......................................................
Shipping weight.............................................. Hydraulic Pump Capacity - Standard Flow.... Lift, steering aux pressure.............................. Hydraulic oil capacity..................................... Speed Hi Range (Fwd. / Rev)........................ Speed Low Range (Fwd. / Rev)...................... Width Standard............................................... Width W/ 3" Extensions................................. Width W/ Dual Wheel Kit.............................. Overall Length (ROPS Up)............................ Height W/ ROPS Up....................................... Height W/ ROPS Folded................................ Wheelbase....................................................... Frame Oscillation............................................ Turning Radius............................................... Slope Rating- Single Tires (std).................... Slope Rating- 3" Wheel Extensions............... Slope Raiting- Dual Wheel Tires................... Slope Rating w/ Cab...................................... Fuel Tank Capacityy .......................................
450-25
1665 lbs. 1845 lbs.
450 Tractor
450-32
1660 lbs. 1875 lbs.
6 gpm @ 3600 rpm 1750 PSI
5.25 US Gallons 9.5 mph / 7 mph 6 mph / 4.5 mph
44.5" 50.5" 66.5" 80.5" 73.5" 55"
43.5" 9"
43.5" 20° Max
25° 30° Max
10 7 UUS Gallons
450-37
1575 lbs. 1784 lbs.
Steiner MSRP Price List
450 Tractor 450-25 / 450-32 / 450-37
Standard Equipment
Quick Specs
Engine 24.8 HP Kubota® D902 Diesel, Liquid-cooled, 898 cc 32.5 HP Kubota® WG972 gas, Liquid-cooled, 962 cc 37 HP Vanguard® M61 EFI gas, Air-cooled, 993 cc
Tire options Field Trac / 22x12-10 (All Terrain) Bar / 22x12-10 Turf / 22x11-10
Additional Features Parking Break Dual LED headlights and Taillights High-Back bucket seat
Storage compartment Cup Holder Front and rear Skid Plates ROPS Bar 12 Volt outlet, 15 amp
All Prices in U.S. Dollars Page 3 of 39
2020 Price Book
All Prices in U.S. Dollars Page 3 of 39
Part 450 Tractors Number Description MSRP In US $
Kubota® Diesel - Liquid Cooled
75-75025BR 450-25 KDL BAR TIRE ............................................................................................. $22,097 75-75025FT 450-25 KDL FLD TRX .............................................................................................. $22,097 75-75025TF 450-25 KDL TURF TIRE ........................................................................................... $22,097
Kubota® Gas - Liquid Cooled
75-75032BR 450-32 KGL BAR TIRE ............................................................................................. $22,373 75-75032FT 450-32 KGL FLD TRX .............................................................................................. $22,373 75-75032TF 450-32 KGL TURF TIRE ........................................................................................... $22,373
Briggs & Stratton Vanguard® EFI - Air Cooled
75-75037BR 450-37 HP EFI BAR TIRE ......................................................................................... $20,125 75-75037FT 450-37 HP EFI FLD TRX .......................................................................................... $20,125 75-75037TF 450-37 HP EFI TURF TIRE........................................................................................ $20,125
Est. Set up Time: 1.5 - 2 hours
450 Tractor
450 Tractor 450-25 / 450-32 / 450-37
All Prices in U.S. Dollars Page 4 of 39
Steiner MSRP Price List
2020 Price Book
Steiner MSRP Price List 2020 Price Book
Page 4 of 39 450DX Tractor
All Prices in U.S. Dollars
Engine Hitch 25 HP Vanguard® M54 Gas, Air-cooled, 896 cc Front - Steiner® Quick-Hitch System
Rear - Standard 2" receiver hitch
Tire options Frame Field Trac / 22x12-10 (All Terrain) Oscillating
Articulating
Transaxles (2) Peerless® 2600 series, single-speed
Instrumentation Engine temperature and Fuel Gauge Tachometer Hour Meter
Forward / Reverse Foot Pedal Control Warranty - 2 years
Hydraulic Pump Capacity - Standard Flow............................................ Lift, steering aux pressure....................................................................... Hydraulic oil capacity............................................................................. Speed (Fwd. / Rev.)................................................................................. Unit weight.............................................................................................. Shipping weight....................................................................................... Width Standard........................................................................................ Width W/ 3" Extensions.......................................................................... Width W/ Dual Wheel Kit....................................................................... Overall Length (ROPS Up)..................................................................... Height W/ ROPS Up............................................................................... Height W/ ROPS Folded......................................................................... Wheelbase............................................................................................... Frame Oscillation.................................................................................... Turning Radius........................................................................................ Slope Rating- Single Tires (std)............................................................. Slope Rating- 3" Wheel Extensions........................................................ Slope Raiting- Dual Wheel Tires............................................................
Slope Rating w/ Cab................................................................................ Fuel Tank Capacity.................................................................................
Standard Equipment
450DX Tractor 450DX-25
Photo
Quick Specs
Additional Features Parking Break Dual LED headlights and Taillights Cup Holder
ROPS Bar Recharging - 20 amp
Steiner MSRP Price List 2020 Price Book
Page 5 of 39 450DX Tractor
All Prices in U.S. Dollars
450DX 6 gpm @ 3600 rpm
1750 PSI 5.25 US Gallons
7.2 mph / 5.1 mph (Unofficial) 1531 lbs. 1718 lbs.
44.5" 50.5" 66.5" 80.5" 73.5" 55"
43.5" 9"
43.5" 20° Max
25° 30° Max
10° 7 US Gallons
Steiner MSRP Price List 2020 Price Book
Page 6 of 39 450DX Tractor
All Prices in U.S. Dollars
Part 450DX Tractor Number Description MSRP In US $
Briggs & Stratton Vanguard® - Air Cooled
75-75125FT 450DX-25 HP VNGRD FLD TRX........................................................................... $17,629 *This is a base model single speed 450. See specs for comparison
Est. Set up Time: 1.5 - 2 hours
Part Exclusive 450DX Tractor Accessories - Dealer Installed Number Description MSRP In US $
75-71318
Kit - 450DX Skid Plate.............................................................................................. Optional kit that provides protection to the under side of the tractor (Std on 450)
$224
Est. Set up Time: 1 Hour
75-71319 KIT-450DX 12V power & Storage.......................................................................... Optional kit that provides 12V power and storage compartment
$90
Est. Set up Time: 0.25 - .5 hours
450DX Tractor 450DX-25
2020 Price Book Page 6 of 39
Accessories All Prices in U.S. Dollars
Tractor Accessories
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71200 DW200 - Dual Wheel Set - Field Trax................................................................. $1,321
Available on 440, 450 and 450DX Optional Kit for work on 30° slopes, added floatation, stability and traction
Est. install time: 1.5 - 2 hours
75-71201 DW201 - Dual Wheel Set - Bar Tread................................................................. $1,249
Available on 440, 450 and 450DX Optional Kit for work on 30° slopes, added floatation, stability and traction
Est. install time: 1.5 - 2 hours
75-71202 DW202 - Dual Wheel Set - Turf Tire.................................................................. $1,231
Available on 440, 450 and 450DX Optional Kit for work on 30° slopes, added floatation, stability and traction
Est. install time: 1.5 - 2 hours
75-71206 WS200 - 3" Wheel Spacer Kit.............................................................................. $270
Available on 440, 450 and 450DX
Optional Kit for added stability and traction when working on slopes 25° or less. Not compatible with the Dual Wheel Kit.
Est. install time: 1 hour
75-71203 WB200 - Weight Bar, Front................................................................................. $222
Available on 440, 450 and 450DX Optional kit that provides additional stability when towing or using 3-pt hitch.
Est. install time: 0.25 hours
2020 Price Book Page 7 of 39
Accessories All Prices in U.S. Dollars
75-71204 WB201 - Weight Kit.............................................................................................. $411
Available on 440, 450 and 450DX (4) 50 Lb. weights included (Weights only)
Est. install time: 0.25 hours
Steiner MSRP Price List
2020 Price Book Page 8 of 39
Accessories All Prices in U.S. Dollars
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71312 KIT - 450 Fender................................................................................................... $244
Available on 450 and 450DX
Optional kit that helps protect the operator from mud and debris that is kicked up by the front tires.
Est. install time: 1 -2 hours
75-71325 Kit - Foot Pegs, 450............................................................................................... $112
Available on 450 and 450DX
Optional kit that provides additional comfort and support. Not compatible with deluxe cab
Est. install time: 0.25 hours
75-71308 Suspension Seat..................................................................................................... $654
Available on 450 and 450DX Optional kit that provides additional comfort while operating the tractor
Est. install time: 1 - 1.5 hours
75-71324 Kit - HC450 - Hand Control 450.......................................................................... $157
Available on 450 and 450DX
Optional kit that provides added stability and more finite control. For all NEW production tractors. See Note 1
Est. install time: 3 - 5 hours
75-71306B Kit - HC450 - Hand Control................................................................................. $171
Available on 440, 450 and 450DX Optional kit that provides added stability and more finite control. See Note 2
Est. install time:
Serial Number Breaks
Tractor Accessories
2020 Price Book Page 9 of 39
Accessories All Prices in U.S. Dollars
3 - 5 hours
Note 1
Note 2
450 Diesel: 75-75025XX - 461+ / 450 Gas: 75-75032XX - 292+ / 450 Briggs: 75-75037XX - 341+ / 450DX Briggs: 75-75125FT - 166+
450 D iesel: 75-75025XX - 272-460 / 450 Gas: 75-75032XX - 180-291 / 450 Briggs: 75-75037XX - 196-340 / 450DX: 75-75125FT - 0-165 / 440 Tractors: ll
Steiner MSRP Price List
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71311 KIT - 450 Low Seat Plate..................................................................................... $108
Available on 450 Optional kit that lowers seat by approximately 1"
Est. install time: 1 - 1.5 hours
75-71211 Treadle Pedal Kit.................................................................................................. $39
Available on 440, 450 and 450DX Optional kit for improving control and making directional changes easier
Est. install time: 0.5 - 1 hour
75-71214 Engine Overheat Protection System.................................................................... $105
Available on 440 and 450 (Kubota Engines only) Optional kit for protecting the engine against overheating.
Est. install time: 1 hour
75-71316 KIT - Power Outlet, Front................................................................................... $140
Available on 450 and 450DX
Optional kit that provides an on/off switch as well as a momentary reversing switch and directional control of certain attachments.
Est. install time: 1.5 - 2 hours
75-71322 Kit - Power Outlet, Rear...................................................................................... $184
Available on 450 and 450DX
Optional kit that provides an on/off switch as well as a momentary reversing switch and directional control of certain attachments.
Est. install time: 1.5 - 2 hours
75-71228 Slope Meter Kit..................................................................................................... $40
Tractor Accessories
Available on 440, 450 and 450DX Optional kit that mounts on top of the tractor to indicate the degree of a slope
Est. install time: 0.25 hours
Accessories All Prices in U.S. Dollars
Steiner MSRP Price List 2020 Price Book
Page 8 of 39
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71315 Kit - Back up Beeper, 450..................................................................................... $182
Available on 450 and 450DX Optional kit that provides an audible signal when moving in reverse
Est. install time: 1 - 2 hours
970649 Kit - ROPS Canopy............................................................................................... $349
Available on 235, 440, 450 and 450DX Optional hard top canopy to protect against the sun and rain
Est. install time: 0.25 - 0.5 hour
75-71209A 3-Point Hitch - Cat-1............................................................................................. $710
Available on 440, 450 and 450DX (Cat-1) 3-pt hitch. (Requires Front & Rear Aux. Hydraulics Kit 75-71323)
Est. install time: 10 hours
75-71323 Kit - Front & Rear Aux. Hydraulics................................................................... $779
Available on 450 and 450DX Optional kit that allows for the mounting of a second set of hydraulic couplers in the
Est. install time: 3 - 4 hours
75-71205A QH200 - 3-Point Quick Hitch/Weight Bar......................................................... $297
Available on 440, 450 and 450DX Allows for the use of Quick-Hitch™ attachments to be run off the back of the
Est. install time: 1-2 hours
Part Dealer Installed Accessories - Order From Parts Number Description MSRP In US $
Kits
970646 Kit - 450 F/R Foot Pedal Update W/ Control Link Modulator........................ $
Tractor Accessories
Must order from the parts. See note 3 Est. install time: 1.5 - 2 hours
Serial Number Breaks
Note 3 450 Diesel: 75-75025XX - 0-271 / 450 Gas: 75-75032XX - 0-179 / 450 Briggs: 75-75037XX - 0-195 /
450DX Briggs: 75-75125FT - 0-164
Accessories All Prices in U.S. Dollars
Steiner MSRP Price List
2020 Price Book Page 9 of 39
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71215B All Weather Deluxe Cab Enclosure ................................................................... $6,104
Available on 440, 450 and 450DX Tempered glass windows shield the operator from wind, snow, dust and rain. Windows can be vented or removed.
Est. install time: 8 - 10 hours
Part Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71221
Water Heater Kit.................................................................................................. $619
Available with liquid cooled engines only Optional kit that provides heat to the interior of the cab.
Est. install time: 2 - 3 hours (Reduced if installed at same time as cab)
75-71229 Quick Disconnect Heater Hose Kit...................................................................... $132
Available on the Deluxe Cab Optional kit that assists in removing water heater kit for easier removal of cab
Est. install time: .25 - .5 hours (Reduced if installed at same time as cab)
75-71309 KIT - LED Light - Deluxe Cab - Front............................................................... $204
Available on the Deluxe Cab Optional kit which provides two front LED work lights
Est. install time: 1 - 2 hours (Reduced if installed at same time as cab)
75-71310 KIT - LED Light - Deluxe Cab - Rear................................................................. $184
Available on the Deluxe Cab
450 Deluxe Cab
Optional kit which provides one Rear LED work light
Est. install time 1 - 2 hours (Reduced if installed at same time as cab)
Deluxe Cab All Prices in U.S. Dollars
Steiner MSRP Price List
2020 Price Book Page 10 of 39
All Prices in U.S. Dollars Page 11 of 39
Part Dealer Installed Cab Accessories - Order From Factory Number Description MSRP In US $
75-71223 Safety Beacon Light Kit ...................................................................................... $194
Available on the Deluxe Cab Optional kit that Increases visibility of the tractor in low light and low visibility situations
Est. install time: 1 - 2 hours (Reduced if installed at same time as cab)
75-71224 Circulating Fan ................................................................................................... $135
Available on the Deluxe Cab Optional kit that helps circulate air to help keep the operator cool inside the cab
Est. install time: 1 - 2 hours (Reduced if installed at same time as cab)
75-71225 Two Side Exterior Mirror Kit ........................................................................... $175
Available on the Deluxe Cab Optional kit that provides an exterior mirror on each side of the cab
Est. install time: 0.5 - 1 hour (Reduced if installed at same time as cab)
75-71226 Interior Mirror .................................................................................................... $75
Available on the Deluxe Cab Optional kit that provides a mirror inside of the cab
Est. install time: 0.5 - 1 hour (Reduced if installed at same time as cab)
450 Deluxe Cab
All Prices in U.S. Dollars Page 12 of 39
Deluxe Cab Steiner MSRP Price List
2020 Price Book
Steiner MSRP Price List 2020 Price Book
Page 12 of 39 MD Decks
All Prices in U.S. Dollars
Photo
MD448 61" (w/discharge chute)
47" 1" to 4 1/2"
Single "V" belt Tapered roller assemblies 3 blades, 16 1/4"
Side 10 x 3.5 semi-pneumatic
330 lbs
MD460 74" (w/discharge chute)
59 3/8" 1" to 4 1/2"
Single "V" belt Tapered roller assemblies
3 blades, 20 1/2" Side
10 x 3.5 semi-pneumatic 360 lbs
MD472 86" (w/discharge chute)
72" 1" to 4"
Single "V" belt Tapered roller assemblies
3 blades, 24 3/4" Side
10 x 3.5 semi-pneumatic 470 lbs
Drive:............................. Shaft to PTO Belt Shaft to PTO Belt Shaft to PTO Belt
Part Finish Mower Decks Number Description MSRP In US $
75-70855A MD448 - Mower Deck 48", Hi-Capacity................................................................. $3,010
Available on 430, 440, 450 and 450DX
Rotary finish mower with striping roller. High-velocity blade speed and channeled discharge chute provide even clipping distribution. Flips up 90° for easy access to blades and underside. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
81-B041
2 hours
75-70860A MD460 - Mower Deck 60", Hi-Capacity................................................................. $3,407
Available on 235, 430, 440, 450 and 450DX
Rotary finish mower with striping roller. High-velocity blade speed and channeled discharge chute provide even clipping distribution. Flips up 90° for easy access to blades and underside. Requires (4) rear weights if operating on a 430 tractor
Finish Mower Decks MD448 / MD460 / MD474
Quick Specs
Overall Width................ Cutting Width................ Cutting Height............... Spindle Drive................
Spindles......................... Blades............................ Discharge...................... Wheels...........................
Steiner MSRP Price List 2020 Price Book
Page 13 of 39 MD Decks
All Prices in U.S. Dollars
Required PTO Belt:
Est. install time:
81-B041
2 hours
Steiner MSRP Price List 2020 Price Book
Page 14 of 39 MD Decks
All Prices in U.S. Dollars
Part Finish Mower Decks Number Description MSRP In US $
75-70865A MD472 - Mower Deck 72", Hi-Capacity................................................................. $3,669
Available on 235, 430, 440, 450 and 450DX
Rotary finish mower with striping roller. High-velocity blade speed and channeled discharge chute provide even clipping distribution. Flips up 90° for easy access to blades and underside. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
81-B041
2 hours
Finish Mower Decks MD448 / MD460 / MD474
Steiner MSRP Price List 2020 Price Book
Page 14 of 39 MX Deck
All Prices in U.S. Dollars
Photo
Overall Width........................................... Cutting Width........................................... Cutting Height.......................................... Spindle Drive........................................... Spindles.................................................... Blades....................................................... Discharge................................................. Wheels...................................................... Weight - Rear Discharge.......................... Weight - Mulching option........................ Drive:........................................................
Part Finish Mower Decks Number Description MSRP In US $
75-71002A MX460 - Rotary Mower 60"..................................................................................... $3,274
Available on 430, 440, 450 and 450DX
Deck ONLY. Choose between a rear discharge kit or a mulching kit. Flips up 90° for easy access to blades and underside. Requires 75-71025 or 75-71027. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
81-B041
2 hours
Finish Mower Deck MX460
Quick Specs
MX460 60 3/4"
60" 1 1/2" to 4"
Single "V" belt Tapered roller assemblies
3 blades, 20 3/4" Rear
10.25 x 3.25 semi-pneumatic 380 lbs 400 lbs
Steiner MSRP Price List 2020 Price Book
Page 15 of 39 MX Deck
All Prices in U.S. Dollars
Part Required - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
Must Choose One
75-71025 Mulching Kit.............................................................................................................. $417
Available on MX460 Only Closes off discharge chute and changes blades for mulch capabilities
Est. install time: 1 - 2 hours
75-71027 Rear Discharge Kit.................................................................................................... $314
Available on MX460 Only To adapt the deck to discharge clippings to the rear
Est. install time: 1 - 2 hours
Finish Mower Decks MX460
Deck Articulation:......................
Construction:..............................
Caster Wheels:............................
Blades:........................................ Side Discharge:........................... Weight....................
10 degrees up and down from horizontal, 20 degrees total per deck;
7-gauge steel top and skirts on center deck and 11-gauge on outer decks
5 front, 2 rear suspension wheels, 9 x 3.5 no-flat, semi-pneumatic tires with tapered roller bearings and greaseable hubs
High-lift blades standard, low-lift or mulching blades available Optional mulching kit available
760 lbs
Part Flex Deck Mower Number Description MSRP In US $
75-71305B FD800 - Flex Deck Mower - 80"............................................................................... $10,367
Available on 440, 450 (Not recommended on 25hp Diesel)
Mow uneven turf and undulating terrain without scalping and give level playing fields a smooth, professional cut. Great around sand traps, tee boxes and pond banks. Requires (4) rear weights
Required PTO Belt:
Est. install time:
4174756
2 - 3 hours
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71313 KIT - Mulching Baffle............................................................................................... $94
Available on the Flex Deck Optional kit that closes off discharge chute and creates a mulching effect and rear
Est. install time: 0.5 - 1 hour
Flex Deck Mower FD800
Quick Specs
Overall Cutting Width:............... Transport Width:........................ Deck Configuration:................... Trim Side Deck:.........................
Spindles:.....................................
FD800 80"
70" (with trim side deck raised) cks with four 21" high-lift blades (1" overlap between decks)
20" offset with hydraulic lift Cast steel with sealed ball bearings
Photo
Flex Deck
Steiner MSRP Price List 2020 Price Book
All Prices in U.S. Dollars Page 16 of 39
Steiner MSRP Price List 2020 Price Book
Page 17 of 39 Rough Cut
All Prices in U.S. Dollars
Photo
RC720 73" (deck 76" with skids)
72" 3 3/4" - 6"
Shaft to PTO belt Cast-iron, sealed ball bearings
3 blades, 24" Rear discharge - flexible front and rear shields
2 skid shoes that allow deck to evenly cut all types of terrain without damaging the mower or the ground
430 lbs.
Part Rough Cut Mower Number Description MSRP In US $
75-71300 RC720 - Rough Cut Mower-72".............................................................................. $2,973
Available on 440, 450 and 450DX Tackles overgrown brush and bramble up to 1 1/2" in diameter. Requires (4) rear weights
Required PTO Belt:
Est. install time:
4169475
1.5 - 1 hour
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71314 KIT - Caster Wheel...................................................................................................
Available on the Rough Cut Optional kit that mounts to the front of the Rough Cut to help stabilize the deck to prevent scalping.
$568
Est. install time: 1 - 2 hours
Rough Cut Mower RC720
Quick Specs
Overall width............................................ Cutting width............................................ Cutting height........................................... Drive.........................................................
Spindles.................................................... Blades....................................................... Discharge.................................................
Skid Shoe.................................................
Steiner MSRP Price List 2020 Price Book
Page 18 of 39 Rough Cut
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71302 Counter Clockwise Blade Rotation Kit................................................................... $490
Available on the Rough Cut Optional kit for creating finer sizing of cut material
Est. install time: 2 - 3 hours
Rough Cut Mower RC720
Steiner MSRP Price List 2020 Price Book
Page 19 of 39 Tree Farm Mower
All Prices in U.S. Dollars
MC400 47" 44"
79" Including wheel shields 47"
2" to 5" Shaft to PTO Belt
Gearbox and 2 V-belts 2 blades 22.5"
Rear 0.25 x 3.25, Semi-pneumatic
272 lbs Shaft to PTO belt
Part Tree Farm Mower Number Description MSRP In US $
75-70805B MC400 - Tree Farm Mower 44".............................................................................. $4,320
Available on 450 and 450DX
Easily cut between rows of trees. Rear fenders standard on 450 and 450DX. For use on the 430, rear fenders must be purchased through parts. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
4174756
2 hours
Tree Farm Mower MC400
Photo
Quick Specs
Mower Overall width............................................ Cutting Width........................................................ Overall Length....................................................... Rear Fender Width................................................
Cutting Height....................................................... Drive...................................................................... Spindle drive.......................................................... Blades.................................................................... Discharge............................................................... Caster Wheel ............................................................. 1 Weight (approx.)....................................................
Steiner MSRP Price List 2020 Price Book
Page 20 of 39 Snow Blower
All Prices in U.S. Dollars
Auger speed:................................................... Blower speed:................................................. Chute:.............................................................. Height of cut:.................................................. Weight:............................................................
140 RPM 700 RPM
Approximately 7" diameter, 223° rotation Adjustable skid shoes, 0" to 3/4"
450 lbs
Part Commercial Snow Blower Number Description MSRP In US $
75-71231 SB648 - 48" Professional Snow Blower................................................................... $4,337
Available on 430, 440, 450 and 450DX Quickly clear the heaviest snow in tough conditions. Works great for commercial or residential applications. (Belt and hose modifications necessary when operating on a 430 tractor)
Required PTO Belt:
Est. install time:
4165834
2 - 3 hours
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71234A SB648 - Electric Chute Deflector............................................................................. $344
Available on SB648
Commercial Snow Blower SB648
Quick Specs
Overall width:................................................. Overall length:................................................ Opening size:.................................................. Serrated auger:................................................
Blower:............................................................ Width of cut: Standard..........................................................
SB648 48" 44"
27" high x 48" wide
16" diameter, open center 18" diameter, 4 blades, 7" depth
48"
Steiner MSRP Price List 2020 Price Book
Page 21 of 39 Snow Blower
All Prices in U.S. Dollars
Optional kit that allows the chute deflector to be operator from the operator's seat. Requires Front Power Outlet Kit
Est. install time: 1 - 2 hours
Steiner MSRP Price List 2020 Price Book
Page 22 of 39 Snow Blower
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71235 SB648 - Drift Cutters (1 Set).................................................................................... $109
Available on SB648 Optional kit that helps to cut into snow banks that are taller than the auger.
Est. install time: 0.25 - 0.5 hours
75-71236 SB648 - Extension Wings (4" total, 2" side, 1 set)................................................. $222
Available on SB648 Optional kit that widens the swath of the snow blower from 48" to 52" (2" wider on each side)
Est. install time: 0.25 - 0.5 hours
Commercial Snow Blower SB648
Steiner MSRP Price List 2020 Price Book
Page 22 of 39 Snow Blowers
All Prices in U.S. Dollars
SB448 SB454 48"
270 lbs
21" H x 48" W, 21" H x 58" W 15"
14" diameter, 4 blades
54" 306 lbs
Solid steel 6" hydraulic chute with 237° rotation standard and optional electric chute deflection
3" adjustable heavy-duty skid shoes, 5/16" high-carbon steel w/ front slider 10-gauge steel 12-gauge steel
Double-layered 3/16" steel base 2 1/2" reversible, made of 1/4" high-carbon steel
Part Residential Snow Blower Number Description MSRP In US $
75-70666 SB448 - 48" Snow Blower-Hyd Chute..................................................................... $3,177
Available on 430, 440, 450 and 450DX 2-Stage Snow Blower, great for clearing snow for residential users
Required PTO Belt:
Est. install time:
4165834
1.5 - 2.5 hours
75-70667 SB454 - 54" Snow Blower-Hyd Chute..................................................................... $3,325
Available on 235, 430, 440, 450 and 450DX 2-Stage Snow Blower, great for clearing snow for residential users
Required PTO Belt:
Est. install time:
4165834
1.5 - 2.5 hours
Residential Snow Blowers SB448 / SB454
Quick Specs
Overall Width............................. Weight........................................ Opening Size.............................. Serrated Auger............................
Blower.........................................
Chute...........................................
Skid Shoes.................................. Side Panels.................................. Housing (Auger and Impeller) Base.............................................
Steiner MSRP Price List 2020 Price Book
Page 23 of 39 Snow Blowers
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
970400 SB448-454 Drift cutter Kit........................................................................................ $104
Available on SB448 & SB454 Optional kit that helps to cut into snow banks that are taller than the auger.
Est. install time: 0.25 - 0.5 hours
970401 SB448-454 Electric Chute Deflector........................................................................ $245
Available on SB448 & SB454 Optional kit that allows the chute deflector to be operator from the operator's seat.
Est. install time: 1 - 2 hours
970403 Integrated Drift Cutter, 4 in. Side Extension (Std on 970401).............................
Available on SB448 & SB454 Optional kit that helps to cut into snow banks that are taller than the auger.
$226
Est. install time: 0.25 - 0.5 hours
Part Optional - Dealer Installed Accessories - Order From Parts Number Description MSRP In US $
970415 Kit - Kick-Stand......................................................................................................... $
Available on SB448 & SB454 Optional kit that assists with hooking up to the tractor
Est. install time: 0.25 - 0.5 hours
Residential Snow Blowers SB448 / SB454
Steiner MSRP Price List 2020 Price Book
Page 24 of 39 Blowers
All Prices in U.S. Dollars
Overall width..................................... Overall height.................................... Overall length.................................... Skid shoe........................................... Fan..................................................... Fan diameter...................................... Fan width...........................................
PB200 27" 33" 67"
- - - -
PB100 33" 18" 24"
Fixed 8-blade, welded
14" 6"
Fan speed........................................... - 4300 rpm at 3600 rpm engine speed
Air flow............................................. Auger speed....................................... Wind Speed....................................... Wind speed (deflected to front)........
8000 cfm -
114 mph 78 mph
3000 cfm at max rpm 175 rpm
- -
Sound level (while in operator seat) 91 dBA
Weight............................................... 235 lbs.
-
95 lbs.
Weight on Casters............................. 195 lbs. -
Part Blowers Number Description MSRP In US $
75-70644B PB200 - Blower, Power Turbine.............................................................................. $5,133
Available on 235, 430, 440, 450 and 450DX Powerful axial-flow turbine design runs quietly and produces wind speeds of 114 MPH. Hydraulically rotate the nozzle 360°. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
81-B041
0.5 - 1 hour
Blowers PB200 / PB100
Quick Specs
Steiner MSRP Price List 2020 Price Book
Page 24 of 39 Blowers
All Prices in U.S. Dollars
75-70642A PB100 - Blower, Power with Deflector.................................................................... $1,578
Available on 235, 430, 440, 450 and 450DX Powerful axial-flow turbine design runs quietly and produces wind speeds of 114
Required PTO Belt: 81-B041
Est. install time: 0.5 - 1 hour
Steiner MSRP Price List 2020 Price Book
Page 25 of 39 Slip Scoop
All Prices in U.S. Dollars
Part Slip Scoop Number Description MSRP In US $
75-70630A SS248 - Slip Scoop - Hydraulic, 48"........................................................................ $1,376
Available on 235, 430, 440, 450 and 450DX
Easily move, lift or haul we and dry material. Also ideal for excavating small areas. Requires (4) rear weights if operating on a 430 tractor
Est. install time: 1.5 - 2.5 hours
Part Optional - Dealer Installed Accessories - Order From Parts Number Description MSRP In US $
78-043 Scarifier Wear Edge.................................................................................................. $
Available for SS248
Optional kit that assists with digging and scraping materials and will help protect the front edge of the bucket
Est. install time: 0.5 - 1 hour
Slip Scoop SS248
Photo
Quick Specs
Overall width.................................................. Overall height................................................. Overall length................................................. Width of bucket..............................................
Bucket capacity............................................... Dumping......................................................... Scarifier teeth..................................................
SS248 52" 16" 33"
48" 3 1/2 cubic ft.
Hydraulic 6 - 1" wide (optional)
Steiner MSRP Price List 2020 Price Book
Page 26 of 39 Dozer Blades
All Prices in U.S. Dollars
Photo
BD248 48" 36" 19" 32" 19"
170 lbs.
BD260 60" 48" 19" 32" 19"
195 lbs. 30°left and right
Adjustable Spring-loaded 3" hardened
3/8" x 4" through hardened steel 2" sawtooth edge
BD272 72" 60" 19" 32" 19"
213 lbs.
Part Dozer Blades Number Description MSRP In US $
75-70507 BD248 - Blade, Dozer 48" w/Power Angle Hitch ................................................. $1,365
Available on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow
Est. install time: 1 - 1.5 hours
75-70527 BD260 - Blade, Dozer 60" with Power Angle Hitch ............................................. $1,463
Available on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow
Est. install time: 1 - 1.5 hours
75-70547 BD272 - Blade, Dozer 72" w/Power Angle Hitch ................................................. $1,561
Dozer Blades BD248 / BD260 / BD272
Quick Specs
Blade width 30° Angled width........................ Overall height............................. Overall length.............................
Blade height from cutting edge.. Weight........................................ Hydraulic Angling...................... Skid shoe..................................... Forward tilt................................. Reversible cutting edge Scarifier teeth.............................
Steiner MSRP Price List 2020 Price Book
Page 27 of 39 Dozer Blades
All Prices in U.S. Dollars
Available
on 235, 430, 440, 450 and 450DX Hydraulically angle the blade up to 30° left or right for efficient move material such as dirt or snow
Est. install time: 1 - 1.5 hours
Steiner MSRP Price List 2020 Price Book
Page 28 of 39 Dozer Blades
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-70510 Gauge Wheel Kit........................................................................................................ $436
Available on BD Blades Optional adjustable gauge wheels (2) that help regulate the depth the blade will go
Est. install time: 0.5 - 1 hour
970420 Poly Blade Edge 48 in. Kit........................................................................................ $197
Available on BD248 Optional kit with a poly edge that helps decrease damage to the surface.
Est. install time: 0.5 - 1 hour
970421 Poly Blade Edge 60 in. Kit........................................................................................ $225
Available on BD260 Optional kit with a poly edge that helps decrease damage to the surface.
Est. install time: 0.5 - 1 hour
970422 Poly Blade Edge 72 in. Kit........................................................................................
Available on BD272 Optional kit with a poly edge that helps decrease damage to the surface.
$274
Est. install time: 0.5 - 1 hour
Part Optional - Dealer Installed Accessories - Order From Parts Number Description MSRP In US $
78-037.7 Heavy Duty Wear Edge............................................................................................. $
Available on BD248 Optional kit that helps increase the life of the edge of the blade
Dozer Blades BD248 / BD260 / BD272
Steiner MSRP Price List 2020 Price Book
Page 29 of 39 Dozer Blades
All Prices in U.S. Dollars
Est. install time: 0.5 - 1 hour
78-038 Heavy Duty Wear Edge for BD260.......................................................................... $
Available on BD260 Optional kit that helps increase the life of the edge of the blade
Est. install time: 0.5 - 1 hour
78-040 Scarifier Wear Edge for BD260............................................................................... $
Steiner MSRP Price List 2020 Price Book
Page 30 of 39 Dozer Blades
All Prices in U.S. Dollars
Available on BD260 Optional kit that helps break up compacted material and provides additional protection to the edge of the blade Est. install time: 0.5 - 1 hour
Steiner MSRP Price List 2020 Price Book
Page 29 of 39 V-Blade
All Prices in U.S. Dollars
BD358 69 1/4"
58" 49" 53"
Overall height........................................... Overall length........................................... Blade height from cutting edge...............
21" 31" 21"
Angling..................................................... 30° left and right, front and back Skid shoes................................................. Forward tilt............................................... Cutting edge, 2 position........................... Weight......................................................
Adjustable Spring-loaded
3/8" x 4" hardened 248 lbs.
Part V-Blade Number Description MSRP In US $
75-70550B BD358 - Blade, V-Blade............................................................................................ $2,926
Available on 235, 430, 440, 450 and 450DX
Quickly move between 4 different angled positions to move snow quickly and efficiently. Requires Front Power Outlet Kit.
Est. install time: 0.5 - 1 hour
V-Blade BD358
Quick Specs
Overall width............................................ Cutting width - Straight................................................... - Scoop......................................................
Steiner MSRP Price List 2020 Prices Book
Page 30 of 39 Sweepers
All Prices in U.S. Dollars
RS454 62" 29" 44" 54" 24" 54" 30
265 rpm justable height (caster wheels) Variable-speed, hydraulic
475 lbs. Forward and reverse
Part Rotary Sweeper Number Description MSRP In US $
75-70587B RS454 - 54" Sweeper, Hydro Drive with reverse................................................... $5,002
Available on 235, 430, 440, 450 and 450DX
Efficiently remove debris such as dirt, snow or grass from sidewalks, driveways and paved areas. Front power outlet kit required. Requires (4) rear weights
Required PTO Belt:
Est. install time:
81-B045
2.5 hours
75-70585B RS350 - 54" Rotary Sweeper.................................................................................... $3,048
Available on 235, 430, 440, 450 and 450DX Gauge Wheels now standard. Efficiently remove debris such as dirt, snow or grass from sidewalks, driveways and paved areas.
Required PTO Belt:
Est. install time:
81-B041
1.5 hours
Rotary Sweepers RS454 / RS350
Quick Specs
RS350 61" 18" 44"
54" 15" 54" 30
300 rpm @ 3200 engine rpm -
PTO - Gear Box 170 lbs.
Overall width..................................... Overall height.................................... Overall length.................................... Brush width.......................................
Brush diameter.................................. Working width................................... Hydraulic angling (Left or Right)..... Speed of brush................................... Ground clearance.............................. ad Drive.................................................. Weight...............................................
Steiner MSRP Price List 2020 Price Book
Page 31 of 39 Sweepers
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-70590
Gauge Wheel Option................................................................................................. $346
Available on RS350 Allows the operator to set ground height to bristles and follow the contour of the surface. (Standard on units with serial number ending with 2246 and above)
Est. install time: 0.5 - 1 hour
Rotary Sweepers RS454 / RS350
Steiner MSRP Price List 2020 Price Book
Page 32 of 39 Terra Rake
All Prices in U.S. Dollars
Tine Depth Adjustment Range Below Grade / Above Grade.................................
Tine Angle Adjustment Range.............................. Caster Wheel Height Adjustment......................... Weight....................................................................
4.25" / 4.50”
5
4.75” 382 lbs
Part Terra Rake Number Description MSRP In US $
75-70681 TR270 - Terra Rake.................................................................................................. $2,613
Available on 440, 450 and 450DX Rakes soil, landscape debris and aggregate.
Est. install time: 1 - 2 hours
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71320 Kit - TR270 Hydraulic Top Link............................................................................. $452
Available for the Terra Rake Optional kit that allows the operator to make adjustments to the tine angle and tine depth from the operator's seat. (Requires Front or rear Power Outlet Kit)
Est. install time: 1.5 - 2 hours
Terra Rake TR270
Quick Specs
Overall Length With Wheels Front....................... Overall Length With Wheels Rear........................ Overall Height....................................................... Maximum Working Width....................................
Min Working Width (Angled)............................... Right & Left Rotation............................................
TR270 65" 48" 30"
70" 65" 20
Steiner MSRP Price List 2020 Price Book
Page 33 of 39 Terra Rake
All Prices in U.S. Dollars
Part Optional - Dealer Installed Accessories - Order From Factory Number Description MSRP In US $
75-71321 Kit - TR270 3-Point Adaptor.................................................................................... $258
Available for the Terra Rake
Optional kit that attaches to a (Cat-0 or Cat-1) 3-point hitch system to allow the TR270 to be utilized on the back of the tractor. (Requires Front/Rear Hydraulic Kit)
Est. install time: 1 hour (after 3 pt. hitch is installed)
Terra Rake TR270
Steiner MSRP Price List 2020 Price Book
Page 34 of 39 Aerator
All Prices in U.S. Dollars
Photo
Part Aerator Number Description MSRP In US $
75-70696A
AR240 - Aerator, Core (with 4 weights)................................................................. $1,976
Available on 235, 430, 440, 450 and 450DX Core aerator with independent 3/4" tine assemblies providing 6 1/2" by 7" coring pattern.
Est. install time: 1 - 1.5 hours
Aerator AR240
Quick Specs
Overall width.................................................. Working Width............................................... Overall height................................................. Overall length.................................................
Main shaft bearings........................................ Aerating wheels.............................................. Tines................................................................ Aerating width actual...................................... Aerating width effective................................. Aerating depth................................................ Aerating pattern..............................................
AR240 45 1/2" 40 1/4" 28 1/2"
30" Greasable 1 1/2"
7 steel with bushings/pressurized lubrication fitting 6 per wheel, 3/4" core tines
42" 48"
Up to 3 1/2" 6 1/2" x 7" (3.6 holes sq./ft.)
Steiner MSRP Price List 2020 Price Book
Page 35 of 39 Stump Cutter
All Prices in U.S. Dollars
Overall Width................................................................................... Overall Height.................................................................................. Overall Length.................................................................................. Cutterhead......................................................................................... Cutterhead Diameter......................................................................... Cutterhead Width.............................................................................. Cutterhead speed.............................................................................. Cutting depth below ground level.................................................... Max. recommended cutting height above ground level weight................................................................................................
Part Stump Cutter Number Description MSRP In US $
75-70895
SC101 - Stump Cutter............................................................................................... $3,181
Available on 430, 440, 450 and 450DX
16" diameter wheel powered by PTO belt driven off a right-angle gearbox. Carbide tipped cutters grind both side-to-side and from the top down
Required PTO Belt:
Est. install time:
81-B044
1 - 2 hours
Stump Cutter SC101
Quick Specs
SC101 34.5" 18" 37"
24 carbide teeth 16"
3.25" 1600 rpm
5" 5"
Steiner MSRP Price List 2020 Price Book
Page 36 of 39 Lawn Sweeper
All Prices in U.S. Dollars
Photo
LS340 62" 52" 82" 40"
3-paddle staggered Semi-pneumatic
Right, left or center pull 24 cu. ft. 530 lbs.
Part Lawn Sweeper Number Description MSRP In US $
75-70632A
LS340 - Lawn Sweeper ............................................................................................. $4,301
Available on 430, 440, 450 and 450DX
Collect, sweep and compact grass clippings or fallen leaves. Can be towed from the center or offset to the left or right. Can also be towed by most power units with a 2" receiver.
Est. install time: 1 - 2 hours
Lawn Sweeper LS340
Quick Specs
Overall width.................................................. Overall height................................................. Overall length to hitch.................................... Width of pickup..............................................
Brush............................................................... Depth wheels................................................... Hitch................................................................ Carrying capacity............................................
Steiner MSRP Price List 2020 Price Book
Page 37 of 39 Soil Tiller
All Prices in U.S. Dollars
Photo
Part Soil Tiller Number Description MSRP In US $
75-70890A TL348 - 48" Rototiller.................................................................................... $2,973
Available on 235, 430, 440, 450 and 450DX Till soil to a depth up to 6". Chain driven rotor is made with a solid 1 1/2" steel shaft and holds 24 cutting tines. Requires (4) rear weights if operating on a 430 tractor
Required PTO Belt:
Est. install time:
81-B041
0.5 - 1 hour
Soil Tiller TL348
Quick Specs
Working width................................................ Working depth................................................ Overall height................................................. Overall width..................................................
Overall length................................................. Tines................................................................ Drive................................................................ Operation........................................................ Bearings..........................................................
TL348 48"
6" maximum 26"
51" 38"
24 replaceable, hardened Chain from gearbox
Tractor in reverse motion Greasable
Steiner MSRP Price List 2020 Price Book
Page 38 of 39 Trencher
All Prices in U.S. Dollars
Photo
TH300 37" 5' 4" 34" 12"
550ft./minute 1 1/2"
28" 4 3/4" optional, 5 1/2" standard
395 lbs.
Part Trencher Number Description MSRP In US $
75-70920A
TH300 - Trencher...................................................................................................... $5,434
Available on 235, 430, 440, 450 and 450DX Cut trenches up to 28" in depth. 5-1/2" Chain Standard
Est. install time: 1.5 - 2 hours
Trencher TH300
Quick Specs
Overall width.................................................. Overall length................................................. Overall height................................................. Auger diameter...............................................
Chain speed..................................................... Drive shaft diameter....................................... Cutting depth.................................................. Cutting width..................................................
Steiner MSRP Price List 2020 Price Book
Page 39 of 39 North America Shipping All Prices in U.S. Dollars
Part Number 75-75025FT
Description 450-25 KDL FLD TRX ...................................................................
Freight Cost $310.00
75-75025BR 450-25 KDL BAR TIRE .................................................................. $310.00 75-75025TF 450-25 KDL TURF TIRE ................................................................ $310.00 75-75032FT 450-32 KGL FLD TRX ................................................................... $310.00 75-75032BR 450-32 KGL BAR TIRE .................................................................. $310.00 75-75032TF 450-32 KGL TURF TIRE ................................................................ $310.00 75-75037FT 450-37 HP EFI FLD TRX ............................................................... $310.00 75-75037BR 450-37 HP EFI BAR TIRE .............................................................. $310.00 75-75037TF 450-37 HP EFI TURF TIRE............................................................. $310.00 75-75125FT 450DX-25 HP VNGRD FLD TRX.................................................. $310.00 75-70865A MD472 - Mower Deck 72", Hi-Capacity......................................... $130.00 75-70860A MD460 - Mower Deck 60", Hi-Capacity......................................... $85.00 75-70855A MD448 - Mower Deck 48", Hi-Capacity......................................... $85.00 75-71002A MX460 - Rotary Mower 60"............................................................ $85.00 75-71305B FD800 - Flex Deck Mower - 80"...................................................... $130.00 75-71300 RC720 - Rough Cut Mower-72"....................................................... $130.00 75-70805B MC400 - Tree Farm Mower 44"....................................................... $85.00 75-70632A LS340 - Lawn Sweeper ................................................................... $130.00 75-70507 BD248 - Blade, Dozer 48" w/Power Angle Hitch ......................... $85.00 75-70527 BD260 - Blade, Dozer 60" with Power Angle Hitch ...................... $85.00 75-70547 BD272 - Blade, Dozer 72" w/Power Angle Hitch ......................... $85.00 75-70550B BD358 - Blade, V-Blade.................................................................. $85.00 75-71231 SB648 - 48" Professional Snow Blower........................................... $130.00 75-70667 SB454 - 54" Snow Blower-Hyd Chute............................................. $85.00 75-70666 SB448 - 48" Snow Blower-Hyd Chute............................................. $85.00 75-70585B RS350 - 54" Rotary Sweeper............................................................ $85.00 75-70587B RS454 - 54" Sweeper, Hydro Drive with reverse............................ $130.00 75-70642A PB100 - Blower, Power with Deflector............................................ $85.00 75-70644B PB200 - Blower, Power Turbine...................................................... $85.00 75-70681 TR270 - Terra Rake.......................................................................... $85.00 75-70630A SS248 - Slip Scoop - Hydraulic, 48"................................................ $85.00 75-70696A AR240 - Aerator, Core (with 4 weights).......................................... $85.00 75-70895 SC101 - Stump Cutter...................................................................... $85.00 75-70920A TH300 - Trencher............................................................................. $130.00 75-70890A TL348 - 48" Rototiller...................................................................... $85.00 75-71204 WB201 - Weight Kit......................................................................... $85.00 75-71215B All Weather Deluxe Cab Enclosure ............................................... $85.00 75-71200 DW200 - Dual Wheel Set - Field Trax............................................ $85.00 75-71201 DW201 - Dual Wheel Set - Bar Tread............................................. $85.00 75-71202 DW202 - Dual Wheel Set - Turf Tire.............................................. $85.00
For Shipments outside of North America, Please contact Customer Service for Freight Charges
North America Destination Charges