MULTIPOINT LOCKS & TRIM SETS
Transcript of MULTIPOINT LOCKS & TRIM SETS
www.rockwellsecurityinc.com
Rockwell Security Inc.
MULTIPOINT LOCKS& TRIM SETS
The Rockwell locksets are designed for discerning homeowners
loaded with features they increasingly seek, like the peace of
mind afforded by a multipoint locking system with options to fit
their security and aesthetic preferences. We’ve made it easy
to offer these benefits as the Rockwell locksets are compatible
with standard mounting hole locations and are an exceptional
value. What’s more, our precision engineered mechanisms will
provide years of trouble-free service.
CONSIDER
•Greater customer appeal - homeowners want the security and
comfort afforded by multipoint hardware.
•High strength- heavy gauge construction with maximum security
options, precision engineered mechanism provides better structural
performance.
•Superior corrosion protection- zinc dichromate steel finish provides
unsurpassed protection and stainless steel is available for your
toughest applications.
•Options to suit any style- works with wood, fiberglass, vinyl, or
aluminum doors matched with complementary Rockwell trim sets.
•Simple manufacturing conversion- compatible with industry
standard 5-1/2” CTC double bore hole locations. Minor changes
to door preparation.
•Economical- delivering exceptional value for money.
•Easy installation, fewer service calls- easy to handle, one piece
construction multipoint locks increases manufacturing efficiencies.
•Greater reliability and durability- quality built into the product to
last a lifetime.
01
®
SECURITY AND SAFETY
02
®
Rockwell Multipoint locking systems provide additional security with 3 locking points on your door.
FBI figures report a burglary occurs every 15 seconds where 34 percent of burglars enter through the
front door. The average loss per break in is $2,230.
Rockwell Multipoint locking systems provide a deterrent to burglars and help protect your homes.
Features include 3 locking points, plus a kickproof, and anti-jemmy lockset.
The Center deadbolts are laminated and hardened with anti-sawing feature.
Rockwell Multipoint locks will not only keep your doors secure, the additional locking points top and bottom
also help prevent door warpage and also provides superior insulation preventing air and water infiltration,
providing energy efficiency.
The factory installed Multipoint Lock offers a solution to both aesthetics and security.
The multipoint lock being secluded inside the door panel provides a clean look to the door with added
safety and security features without the unsightly surface mounted additional locks being installed on a
door for added security.
Rockwell Multipoint Locking Systems
2.0
41
"[5
1.8
mm
]
7.0
00
" [
17
7.8
mm
]
ROCKWELL TL10 MULTIPOINT LOCKFOR AMERICAN ENTRY DOORS
Rockwell TL10 multipoint lock with triple latch builtfor entry doors.
SPECIFICATIONS
Part Number
Panel Size
Top LatchLocation
Overall Length
70108768 6’8” 35.875” 73.094”
70108780 8’0” 51.875” 89.094”
BA
CK
SE
T2-3
/4”
[69.9
mm
]3
.64
8"
[9
2.7
mm
]
3.7
80
" [
96
.0m
m]
9.4
49
" [
24
0.0
mm
]
30
.21
9"
[76
7.6
mm
] 23
.21
9"
[58
9.8
mm
]7
.00
0"
[1
77
.8m
m]
OV
ER
ALL
LE
NG
TH
7
3.0
94
” &
89
.09
4”
0.7
87
" [
20
.0m
m]
1.0
00
"[2
5.4
mm
]
6.09
4" [
154.
8mm
]
03
Automatic independent triple latching points.Laminated steel, anti-saw, anti-jemmy and kick resistant center deadbolt for maximum security.
90 degree consumer friendly easy locking operation.Visual lock indicator feature.
Adjustable strike plates allow for field adjustment.
MATERIAL AND FINISH :
Heavy gauge steel construction with coated faceplate
BACKSET : 2-3/4”
HOLE CENTER : 5.5” center to center
DEADBOLT : 1“ wide x 1” throw Laminated Steel
with anti-saw, anti-jemmy and kick resistant feature.
Americanized 90 degree turn
LATCH : 1/2” throw, 45 degree turn
FACEPLATE : 0.787” wide (20mm) Euro-groove
application
CYCLE TESTING : Tested to over 100,000 cycles
TOP
LA
TCH
LO
CA
TIO
NFits standard double bore with 5.5” hole centersand 2-1/8” bore.
Precision engineered components for a smooth and reliable operation.
One piece construction maintains door panel integritywhile ensuring a simple, trouble free and easy installation.
Field reversible with a screwdriver.
®
7010 Series - 2-3/4” Backset
ROCKWELL XL22 MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS
One Piece Construction maintains door panel
integrity while ensuring a simple, trouble free
and easy installation.
Automatic independent triple latching points.
Rockwell XL22 multipoint lock with triple latch
04
Part Number
Panel Size
Top LatchLocation
Overall Length
72228768 6’8” 32.375” 66.594”
72228780 8’0” 45.500” 79.724”
MATERIAL AND FINISH :
Heavy gauge steel construction with coated faceplate
BACKSET : 2-3/8”
HOLE CENTER : 5.5” center to center
DEADBOLT : 1“ wide x 1” throw Laminated steel
Americanized 90 degree turn
LATCH : 1/2” throw, 45 degree turn
FACEPLATE : 0.787” wide (20mm) Euro-groove
application
CYCLE TESTING : Tested to over 100,000 cycles
Laminated Steel, anti-saw, anti-jemmy and
kick resistant center deadbolt for maximum security.
Visual lock indicator feature
Fits standard double bore with 5.5” hole centers
and 2-1/8” bore.
Field reversible with a screwdriver.
Precision engineered components for a smooth
and reliable operation
Adjustable strike plates allow for field adjustment.
OV
ER
ALL
LE
NG
TH
5.12
2”13
0.1m
m
0.78
7”20
.0m
m
25.4mm
3.758”95.5mm
28.3
41”
719.
9mm
9.44
9”24
0.0m
m 6.09
5”15
4.8m
m
BACKSET2-3/8”
60.3mm
1.0”
TOP
LA
TCH
LO
CA
TIO
N
3.78
0”96
.0m
m
2.04
1”51
.8m
m
5.87
8”14
9.3m
m
90 degree consumer friendly easy locking operation.
®
SPECIFICATIONS
7222 Series - 2-3/8” Backset
ROCKWELL ST3 MULTIPOINT LOCKFOR AMERICAN ENTRY DOORS
Rockwell ST multipoint lock with deadlocking
tongues are built to work with Rockwell
traditional grip handle sets and standard lever sets.
Precision engineered components for a smooth and
reliable operation.
Adjustable strike plates allow for field adjustment.
MATERIAL AND FINISH :
Heavy gauge steel construction with coated faceplate
or Stainless Steel for coastal applications.
BACKSET : 2-3/8”
HOLE CENTER : 5.5” center to center
DEADBOLT : 1” Wide x 1“ throw Laminated Steel
Americanized 90 degree turn
LATCH : 1/2” throw, 45 degree turn
FACEPLATE : 0.787” wide (20mm) Eurogroove
application
CYCLE TESTING : Tested to over 100,000
cycles
Fits standard double bore with 5.5” hole centers
and 2-1/8” bore.
05
Laminated Steel, anti-saw, anti-jemmy and kick
resistant center deadbolt for maximum security.
90 degree consumer friendly easy locking operation.
Visual lock indicator feature.
25.4mm1.00”
OV
ER
ALL
LE
NG
TH
Field reversible with a screwdriver.
One piece construction maintains door panel integrity
while ensuring a simple, trouble free and easy
installation
SPECIFICATIONS
®
7322, 7311 Series- 2-3/8” Backset
Part Number
MaterialPanelSize
Bottom TongueLocation
Top LatchLocation
73228768 Steel 6’8” 19.443” 32.555”
73228780 Steel 8’0” 22.318” 45.680”
73118868Stainless
Steel6’8” 19.443” 32.555”
73118880Stainless
Steel8’0” 22.318” 45.680”
OverallLength
66.594”
79.724”
66.594”
79.724”
06
®
High security multiple locking points. One piece construction
Easy to operate multipoint lock works with a traditional entry grip handle set
American consumer friendly with 1/4 turn deadbolt lock indicator
Fits standard 2 1/8” double bore at 5 1/2” centers
PERFORMANCE BENEFIT OF
MULTIPOINT LOCKING WHILE
MAINTAINING THE LOOK AND
COST POINT OF A TRADITIONAL
GRIP HANDLE SET
EASY TO USE - MULTIPLE TRIM OPTIONS
COST EFFECTIVE - FIELD ADJUSTABLE & HIGHLY SECURE
PREMIUM ROCKWELL LUMINA MULTIPOINT HANDLE SET WITH DELTA LEVER
07
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
Individually spring loaded function.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; 2-1/4” Kits available.
Individually Spring Loaded Levers
HANDING : Non-handed Kit
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle for use with 7322 and 7311 series
Multipoint locks.
SPECIFICATIONS
®
LUMINA HANDLE SET DUMMY MOUNTING KIT
Part Number Finish
HDMKAIWUS15 Brushed Nickel
HDMKAIWUS10B Oil Rubbed Bronze
For 7322 / 7311 Series
Part Number
H700MPDLUS15 Brushed Nickel
H700MPDLUS10B Oil Rubbed Bronze
Finish
ADJUSTABLE
18-3/8"
9/16"
2-1/2"
2-1/2"1-1/4"
11-3/16"
2-5/16"
2-1/2"9/16"
Clears Screen Doors
For 7322 / 7311 Series
Part Number
H790MPDLUS15 Brushed Nickel
H790MPDLUS10B Oil Rubbed Bronze
Finish
CARMEL HANDLE SET DUMMY MOUNTING KIT
Part Number Finish
HDMKAIWUS15 Brushed Nickel
HDMKAIWUS10B Oil Rubbed Bronze
SPECIFICATIONS
®
08
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
Individually spring loaded function.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; 2-1/4” Kits available.
Individually Spring Loaded Levers
HANDING : Non-handed Kit
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle for use with 7322 and 7311 series
Multipoint locks.
PREMIUM ROCKWELL CARMELMULTIPOINT HANDLE SET WITH DAHLI LEVER
9/16"
3-1/8"
2-1/2"1-1/4"2-1/2"9/16"
18-3/8"
11-3/16"
2-13/16"ADJUSTABLE
PREMIUM ROCKWELL TIMES SQUARE MULTIPOINT HANDLE SET WITH DELTA LEVER
09
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
SIZE: 11” x 2-1/2” Escutcheon Plate covers 2-1/8”
cylindrical cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; Conversion Kits
available for 2-1/4” thick doors
Individually Spring Loaded Levers
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle
HANDING : Non-handed Reversible Levers
Part Number Finish
H433MPDLUS15 Brushed Nickel
H433MPDLUS10B Oil Rubbed Bronze
SPECIFICATIONS
®
For 7010, 7222, 7322 & 7311 Series
1-1/4"
2-5/16"
9/16"2-1/2"
11-3/16"
2-1/2"
11-3/16"
4"
PREMIUM ROCKWELL VERANO MULTIPOINT HANDLE SETWITH DAHLI LEVER
10
MATERIAL: Solid Brass Drop Forged Construction
for precision, strength and long lasting durability
SIZE: 11” x 2-1/2” Escutcheon Plate. Covers 2-1/8”
cylindrical cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY : 1-1/4“ Solid Brass Nickel Plated Wide bow keys
DOOR THICKNESS : 1-3/4”; Conversion Kits for 2-1/4”
thick doors are available.
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle
HANDING : Non-Handed Reversible Levers
SPECIFICATIONS
®
Part Number Finish
H435MPMLUS15 Brushed Nickel
H435MPMLUS10B Oil Rubbed Bronze
H435MPMLDN Distressed Nickel
1-1/4"
2-13/16"
7/16"2-1/2"
11-3/16"
4.18"
11-3/16"
2-1/2"
4.18"
For 7010, 7222, 7322 & 7311 Series
For 7010, 7222, 7322 & 7311 Series
11-3/16"
2-1/2"
3-3/4"
2-1/2"
11-3/16"3-3/4"
1-1/4"7/16"
2.9"
PREMIUM ROCKWELL VERANO MULTIPOINT HANDLE SETWITH BOURNE LEVER
11
Part Number Finish
H435MPBLUS15 Brushed Nickel
H435MPBLUS10B Oil Rubbed Bronze
H435MPBLDN Distressed Nickel
MATERIAL: Solid Brass Drop Forged Construction
for precision, strength and long lasting durability
SIZE: 11” x 2-1/2” Escutcheon Plate. Covers 2-1/8”
cylindrical cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY : 1-1/4“ Solid Brass Nickel Plated Wide bow keys
DOOR THICKNESS : 1-3/4”; Conversion Kits for 2-1/4”
thick doors are available.
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle
HANDING : Non-Handed Reversible Levers
SPECIFICATIONS
®
For 7010, 7222, 7322 & 7311 Series
1-1/4"9/16"
2-1/4"
2-1/2"
11-3/16"
4
2-1/2"
11-3/16"
4
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
SIZE: 11” x 2-1/2” Escutcheon Plate covers 2-1/8”
cylindrical cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; Conversion Kits
available for 2-1/4” thick doors
Individually Spring Loaded Levers
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle
HANDING : Non-handed Reversible Levers
12
Part Number Finish
H435MPDQUS15 Brushed Nickel
H435MPDQUS10B Oil Rubbed Bronze
H435MPDQDN Distressed Nickel
PREMIUM ROCKWELL VERANO MULTIPOINT HANDLE SET WITH QUATTRO LEVER
SPECIFICATIONS
®
For 7010, 7222, 7322 & 7311 Series
13
Part Number Finish
H435MPCLUS15 Brushed Nickel
H435MPCLUS10B Oil Rubbed Bronze
H435MPCLDN Distressed Nickel
PREMIUM ROCKWELL VERANO MULTIPOINT HANDLE SETWITH CHELSEA LEVER
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
SIZE: 11” x 2-1/2” Escutcheon Plate covers 2-1/8”
cylindrical cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; Conversion Kits
available for 2-1/4” thick doors
Individually Spring Loaded Levers
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle
HANDING : Non-handed Reversible Levers
SPECIFICATIONS
®
2-1/2"
11-3/16"4 "
11-3/16"
2-1/2"1-1/4"
7/16"
2.63
For 7010, 7222, 7322 & 7311 Series
14
MATERIAL: Solid Brass Drop Forged construction.
SIZE: 9” x 2-1/2” Trim Plate. Covers 2-1/8“ Cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,
pin depths and increments.
KEY: 1-1/4” Wide bow Solid Brass keys
DOOR THICKNESS: 1-3/4”; 2-1/4” C Kits available.
Part Number Finish
H401CLUS15 Brushed Nickel
H401CL10B Oil Rubbed Bronze
H401CLDN Distressed Nickel
H401CLWH White
H401CLPVDUS3 Lifetime Brass
H401CLPVDUS15 Lifetime Brushed Nickel
2.5" 63.5mm
9" 2
28.6
mm
PREMIUM SAPPHIRE MONACOMULTIPOINT LOCK TRIMWITH CHELSEA LEVER
SPECIFICATIONS
®
For 7010, 7222, 7322 & 7311 Series
9" 2
28.6
mm
MATERIAL: Solid Brass Drop Forged Construction.
SIZE : 9" x 2 -1/2” Trim Plate. Covers 2-1/8” cutout.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,
pin depths and increments.
KEY : 1-1/4“ Wide Bow Solid Brass keys
DOOR THICKNESS: 1-3/4”, 2-1/4” C Kits available.
HANDING: Non-handed.
15
Part Number Finish
H401BLUS15 Brushed Nickel
H401BL10B Oil Rubbed Bronze
H401BLDN Distressed Nickel
H401BLPVDUS3 Lifetime Brass
2.5" 63.5mm
PREMIUM SAPPHIRE MONACO MULTIPOINT TRIMWITH BOURNE LEVER
SPECIFICATIONS
®
For 7322 / 7311 Series
16
Part Number Finish
H600MPMUS15 Brushed Nickel
H600MPMUS10B Oil Rubbed Bronze
H600MPMDN Distressed Nickel
SAN JOSE HANDLE SET DUMMY MOUNTING KIT
Part Number Finish
HDMKAIWUS15 Brushed Nickel
HDMKAIWUS10B Oil Rubbed Bronze
HDMKAIWDN Distressed Nickel
MATERIAL: Solid Brass Drop Forged
Construction for precision, strength and durability.
Individually spring loaded function.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,
pin depths and increments,
KEYS : 1-1/4” Wide Bow Solid Brass Keys
DOOR THICKNESS : 1-3/4”, 2-1/4” C Kits available.
FUNCTION : Residential Single Cylinder Multipoint
lock door handle
®
3.50
2.50
2.50
5.50
3.3
11.195.50
7.67
4.01
0.55
3.28
1.57
2.35
PREMIUM ROCKWELL SAN JOSEMULTIPOINT HANDLE SET WITH QUATTRO LEVER
SPECIFICATIONS
PREMIUM ROCKWELL SAVOYMULTIPOINT HANDLE SET WITH CHELSEA LEVER
®
For 7322 / 7311 Series
MATERIAL: Solid Brass Drop Forged Construction
for precision, strength and long lasting durability.
Individually spring loaded function
Cylinder : Anti-bump and anti-pick, 5 pin SC1
Keyway, pin depths and increments
KEYS: 1-1/4” Wide Bow Solid Brass Keys
DOOR THICKNESS : 1-3/4”; 2-1/4” C Kits available.
HANDING : Non-Handed Kit
FUNCTION : Residential Single Cylinder Multipoint
lock door handle for use with 7322 and 7311 series.
Part Number Finish
H303MPCLUS15 Brushed Nickel
H303MPCL10B Oil Rubbed Bronze
H303MPCLDN Distressed Nickel
H303MPCLUS3 Lifetime Brass
H300MPMWH White
17
Finish
Brushed Nickel
Brass
Oil Rubbed Bronze
Part Number
HDMK03
HDMK71
HDMK10B
SAVOY HANDLE SET DUMMY MOUNTING KIT
SPECIFICATIONS
3.94
5.00
4.00
2.75
5.50
7.59
2.75
2.75
3.28
0.55
0.55
1.73
2.53
For 7322 / 7311 Series
18
MATERIAL: Solid Brass Drop Forged construction
for precision, strength and long lasting durability
Individually spring loaded function.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1
Keyway, pin depths and increments.
KEY: 1-1/4“ Wide bow Solid Brass keys
DOOR THICKNESS : 1-3/4”; 2-1/4” C Kits available.
Individually Spring Loaded Levers
HANDING : Non-handed Kit
FUNCTION : Residential Single Cylinder Multipoint
lock door Handle for use with 7322 and 7311 series
Multipoint locks.
Part Number Finish
H310MPDLUS15 Brushed Nickel
H310MPDLUS10B Oil Rubbed Bronze
ZENIA HANDLE WITH DELTA LEVER
Part Number Finish
H310MPMLUS15 Brushed Nickel
H310MPMLUS10B Oil Rubbed Bronze
ZENIA HANDLE WITH DAHLI LEVER
ZENIA HANDLE SET DUMMY MOUNTING KIT
Finish
Brushed Nickel
Brass
Oil Rubbed Bronze
Part Number
HDMK03
HDMK71
HDMK10B
SPECIFICATIONS
®
2-3/4"
2-3/4"
4
5
3-15
/16"
53-
15/1
6"3-
15/1
6"
9/16"
2-1/2"
9/16"
9/16"
5
2-1/2"
2-3/4"
1-1/4"
PREMIUM ROCKWELL ZENIAMULTIPOINT HANDLE SET WITH DELTA/DAHLI LEVER
For 7010, 7222, 7322 & 7311 Series
Part Number Lever Style
L2AMPDLUS15 DELTA
L2AMPCLUS15 CHELSEA
L2AMPDQUS15 QUATTRO
L2AMPMLUS15 DAHLI
AQUA SERIESDrop Forged Solid Brass Deadbolts
Part Number Finish
461MPC-US15 Brushed Nickel
Traditional style low profile deadbolt with cylinder cover
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 keyway,
pin depths and increments.
KEYS : 1-1/4” Wide bow Solid Brass keys
DOOR THICKNESS: 1-3/4”: 2-1/4” C Kits available
AQUA SERIESDrop Forged Solid Brass LeverMultipoint Door Handle set
Individually spring loaded levers to prevent handle
sag.
Non-Handed.
Short rotation lever trims.
Covers 2-1/8” Cylinderical cutout.
PREMIUM AQUA SOLID BRASS SECTIONAL DEADBOLT AND LEVER MULTIPOINT TRIM SET
19
2.750
4.0004.000
2.7500.551
2.200
4.186
2.750
5.000
2.52.750
5
4
®
DELTA
CHELSEA
QUATTRO
DAHLI
Part Number Lever Style
L2AMPDLUS10B DELTA
L2AMPCLUS10B CHELSEA
L2AMPDQUS10B QUATTRO
L2AMPMLUS10B DAHLI
PREMIUM AQUA SOLID BRASS SECTIONAL DEADBOLT AND LEVER MULTIPOINT TRIM SET
For 7010, 7222, 7322 & 7311 Series
20
2.750
4.0004.000
2.7500.551
AQUA SERIESDrop Forged Solid Brass Deadbolts
Part Number Finish
461MPC-US10B Oil Rubbed Bronze
Traditional style low profile deadbolt with
cylinder cover
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 keyway,
pin depths and increments.
KEYS : 1-1/4” Wide bow Solid Brass keys
DOOR THICKNESS: 1-3/4”: 2-1/4” Kits available
AQUA SERIESDrop Forged Solid Brass LeverMultipoint Door Handle set
Individually spring loaded levers to prevent handle
sag.
Non-Handed.
Short rotation lever trims.
Covers 2-1/8” Cylinderical cutout.
®
2.3502.750
5.000
3.918
5.000
4.05
2.63
DELTA
CHELSEA
QUATTRO
DAHLI
®
MATERIAL: Solid Brass Drop Forged Construction
for precision, strength and long lasting durability.
Individually spring loaded function.
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,
pin depths and increments.
KEYS : 1-1/4” Wide Bow Solid Brass Keys
DOOR THICKNESS: 1-3/4”; 2-1/4” C Kits available.
FUNCTION : Residential Single Cylinder Multipoint
door Handle.
Part Number Finish
H200MPMCLUS15 Brushed Nickel
H200MPMCLUS10B Oil Rubbed Bronze
H200MPMCLPVDUS3 Lifetime Brass
MONDRIAN HANDLE SET DUMMY MOUNTING KIT
Part Number Finish
HDMK03 Brushed Nickel
HDMK10B Oil Rubbed Bronze
HDMK71 Brass21
SPECIFICATIONS
3"
7.59
5.5010.83
3.27
1.73
2.61
PREMIUM ROCKWELL MONDRIANMULTIPOINT HANDLE SET WITH CHELSEA LEVER
For 7322 / 7311 Series
0.57
22
MATERIAL: Solid Brass Drop Forged Construction
for precision, strength and long lasting durability.
Individually spring loaded function
CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,
pin depths and increments.
KEYS : 1-1/4” Wide Bow Solid Brass Keys
DOOR THICKNESS: 1-3/4”, 2-1/4” C Kits available.
FUNCTION : Residential Single Cylinder Multipoint
door handle
WINDSOR HANDLE SET DUMMY MOUNTING KIT
Part Number Finish
HDMK03 Brushed Nickel
HDMK10B Oil Rubbed Bronze
HDMK71 Brass
Part Number Finish
H100MPCLS15 Brushed Nickel
H100MPCL10B Oil Rubbed Bronze
H100MPCLDN Distressed Nickel
H100MPCLPVDUS3 Brass
SPECIFICATIONS
®
7.59
5.50
2.39
3.54
4.23
¢2.58
¢2.50
3.27
1.51
2.37
PREMIUM ROCKWELL WINDSOR MULTIPOINT HANDLE SET WITH CHELSEA LEVER
For 7322 / 7311 Series
0.67
For 7010, 7222, 7322 & 7311 Series
Traditional style low profile deadbolt
CYLINDER: Anti-bump, anti-pick, 5 pin SC1 keyway,
pins and increments.
KEYS : 1-1/4” Wide bow Solid Brass Keys
DOOR THICKNESS: 1-3/4”; 2-1/4” C Kits avaiable.
23
Part Number Finish
DB20-US15 Brushed Nickel
DB20-US10B Oil Rubbed Bronze
DB20-PVDUS3 Brass
DB20-WH White
Individually spring loaded levers to prevent
handle sag.
Non-Handed.
Short rotation lever trims
Concealed screws.
Covers 2-1/8” cylindrical cutout.
Sapphire Drop Forged Solid BrassLever Mutlipoint Door Handle set
BOURNE LEVER
NORWICH LEVER
DAHLI LEVER
CHELSEA LEVER
QUATTRO LEVER
Part Number Lever Style
LCM-1510 Chelsea Lever
LBM-1510 Bourne Lever
LDQ-1510 Quattro Lever
LMM-1510 Dahli Lever
LNM-1510 Norwich Lever
SOLID BRASS SECTIONAL DEADBOLTAND LEVER MULTIPOINT LOCK TRIM
®
Sapphire Drop Forged Solid BrassDeadbolts
For 7010, 7222, 7322 & 7311 Series
D180 Series
24
Contemporary style deadbolt and individually
spring loaded levers to prevent handle sag.
Fully reversible lever handles.
CYLINDER : 5 pin SC1 Keyway, pin depths and
increments.
Short rotation lever trim facilitates ease of operation.
Easy to install.
Covers 2-1/8” cylindrical cutout.
DOOR THICKNESS : 1.75”
Builders Deadbolts
Builders Lever Trim Set
Part Number Finish
GLM10-US15 Brushed Nickel
GLM10-10B Oil Rubbed Bronze
GLM10-US3 Brass
Part Number Finish
D180-US15 Brushed Nickel
D180-US10B Oil Rubbed Bronze
D180-US3 Brass
GLM10 Series
BUILDERS GRADE SECTIONAL DEADBOLT AND LEVER MULTIPOINT TRIM SET
®
Builders Deadbolts 2-3/4" Conversion Kit
Part Number Finish
D182CKITUS15 Brushed Nickel
D182CKIT10B Oil Rubbed Bronze
For 7010 & 7222Series
25
®
2334 Series Double Center Strikeplate
Part Number Finish
23340001
23340003S
23340004
Brass
Brushed Nickel
Oil Rubbed Bronze
24
(2x) R6.48 [R0.255]
1.6
[0.0
6”]
28.7
[1.1
3”]
TYP.
1.5
[0.0
6”]
222.
2 [8
.75”
]
47.6
[1.8
8”]
62.9
[2.4
8”]
206.
3 [8
.13”
]
14.2 [0.56”] 7.3 [0.29”]
111.
8 [4
.41”
]
222.
5 [8
.76”
]
37.8 [1.49”]
11.2 [0.44”] 21.5 [0.85”]
54 [2
.13”
] 133.
5 [5
.26”
]
43 [1.69”]
Part Number Finish
23370001
23370003S
23370004
Brass
Brushed Nickel
Oil Rubbed Bronze
1.6
[0.0
6”]
28.7
[1.1
3”]
TYP.
1.5
[0.0
6”]
211.
6 [8
.34”
]
47.6
[1.8
8”]
52.4
[2.0
6”]
195.
7 [7
.71”
]
14.2 [0.56”] 7.3 [0.29”]
106.
5 [4
.2”]
211.
9 [8
.35”
]
37.8 [1.49”]
12.2 [0.48”]
(2x) R6.48 [R0.255]
21.5 [0.85”]
54 [2
.13”
]
122.
7 [4
.83”
]
43 [1.69”]
2337 Series Double Center Strikeplate
For 7322 & 7311Series
For 7010, 7222, 7322 & 7311 Series
®
26
Part Number Finish
23350001
23350003S
23350004
Brass
Brushed Nickel
Oil Rubbed Bronze
73.6 [2.90”]
73 [2
.88”
]
88.9
[3.5
0”]
7.3 [0.29”]14.2 [0.56”]
15 [0
.59”
]
40 [1
.58”
]
54 [2
.13”
]
21.5 [0.85”]
89.2
[3.5
1”]
11.2 [0.44”]
(2x) R6.48 [R0.255]
37.8 [1.49”]
44.5
[1.7
5”]
TYP.
1.5
[0.0
6”]
1.6
[0.0
6”]
28.7
[1.1
3”]
47.6
[1.8
8”]
Dimensions and Routing Detail
For 7010, 7222, 7322 & 7311 Series
2336 Series Adjustable Strikeplatefor 2-1/4” Thick Doors
2335 Series Adjustable Strikeplatefor Outswing applications Suitable
Part Number Finish
23360001
23360003
23360004
Brass
Brushed Nickel
Oil Rubbed Bronze
57.3 [2.26”]
47.6
[1.8
8”]
73 [2
.88”
]
88.9
[3.5
0”]
11.8 [0.46”]14.2 [0.56”]
TYP.
1.5
[0.0
6”]
1.6
[0.0
6”]
28.7
[1.1
3”]
54 [2
.13”
]
47.7 [1.88”]
89.2
[3.5
1”]
(2x) R6.48 [R0.255]
21.2 [0.83”] 21.5 [0.85”]
44.5
[1.7
5”]
Dimensions and Routing Detail
For 7010, 7222, 7322 & 7311 Series
Part Number Finish
23320001
23320003
23320004
233200DN
23321178
Brass
Brushed Nickel
Oil Rubbed Bronze
Distressed Nickel
Stainless Steel
Part Number Finish
23190001
23190003
23190004
Brass
Brushed Nickel
Oil Rubbed Bronze
24
Dimensions and Routing Detail Dimensions and Routing Detail
89.2
[3.5
1”]
45.8 [1.803”]
7.3 [0.287”]
88.9 [3.500”]73 [2.875”]
47.6 [1.875”]
14.5 [0.571”]
38.2 [1.505”]
1.5
[0.0
59]
9.2
1.6
[0.0
6]
28.7
[1.1
3]
54 [2
.13”
]
21.5 [0.85”]11.2 [0.44”]
(2x) R6.48 [R0.255]
37.8 [1.49”]
89.2
[3.5
1”]
45.8 [1.803”]
47.6 [1.875”]
73.0 [2.875”]
88.9 [3.500”]
7.3 [0.287”]
10.2 [0.402”]
54 [2
.13”
]
21.5 [0.85”]11.2 [0.44”]
(2x) R6.48 [R0.255]
37.8 [1.49”]
TYP.
1.5
[0.0
6”]
1.6
[0.0
6”]
28.7
[1.1
3”]
27
®
2319 Series Standard Strikeplate 2332 Series Adjustable Strikeplate
For 7010, 7222, 7322 & 7311 Series
P
Part Number Description
70108700DBDust box for Adjustable
Strike
1.0
00"
Part Number Description
70100000 Construction Handle
CONSTRUCTION HANDLES
ACCESSORIES
ROUTER BIT
Part Number Description
MPLDB203 Euro Groove Router Bit
0.406”
0.563 "
DUST BOX FOR STRIKE
2.875 "3.465 "
0.87
0"
0.032 "
Part Number
7010MPSSC
3" Strike Plate Screws
Part Number Finish
2332SC10B
2332SCUS3
2332SCUS15
Oil Rubbed Bronze
Brass
Brushed Nickel
1-1/2” MP Lock Mounting Screws
0.800”101.6 4.00”
50.8
2.0
0”
28
®
Handle Set Conversion Kit
Part Number Description
MI-DL-PACK72 Passage Set Conversion Kit
MI-DL-PACK73 Deadbolt Conversion Kit
MI-DL-PACK74Entry Handle Set
Conversion Kit
ACCESSORIES
"
ROCKWELL CONVERSION KITS FOR 2-1/4” THICK DOORS
29
ROCWELL CONVERSION KITS FOR SINGLE POINT LOCK
Part Number Description
CONKHER-US15 Conversion Kit - US15
Solid Brass Nickel Plated Keyblank
Wide Bow Key
SC1 Keyway
Part Number Finish
EROKBSC NICKEL PLATED
ROCKWELL WIDE BOW KEY BLANKS
CONKHER-US10B Conversion Kit - US10B
CONKHER-US3 Conversion Kit - US3
®
Passage Lever Set Conversion Kit
2.250”
4.850”
Deadbolt Conversion Kit
2.502”
1.675”
2.000”
3.000”
2.500”
1.675”
3.592”
EURO PROFILE LOCKING CYLINDERS
Euro Profile Cylinder Locks 90 degree Turn
30
Part Number Finish
33330101 Brass
MATERIAL: Solid Brass Construction with 2 solid
brass keys with set screws for easy rekeying
DOOR THICKNESS: 1-3/4"
SPECIFICATIONS: SC1 Keyway with SC1 pin
depths, and pin increments.
33330103 Brushed Nickel
33330104 Oil Rubbed Bronze
Part Number Finish
33660001 Brass
MATERIAL: Solid Brass Construction with 2 solid
brass keys with set screws for easy rekeying
DOOR THICKNESS: 1-3/4"
SPECIFICATIONS: SC1 Keyway with SC1 pin
depths, and pin increments.
Euro Profile Cylinder Locks 360 degree Turn
33660003 Brushed Nickel
33660004 Oil Rubbed Bronze
Part Number Finish
36454551 Brass
MATERIAL: Solid Brass Construction with 2 solid
brass keys with set screws for easy rekeying
DOOR THICKNESS: 2-1/2”
SPECIFICATIONS: SC1 Keyway with SC1 pin
depths, and pin increments.
Euro Profile Cylinder Locks 360 degree Turn
36454503 Brushed Nickel
36454504 Oil Rubbed Bronze
Solid Brass Euro profilecylinder 90 degree turn
Fits 1-3/4" thick door
Solid Brass Euro profilecylinder 360 degree turn
Fits 1-3/4" thick door
Solid Brass Euro profilecylinder 360 degree turn
Fits 2-1/2" thick door
®
SPECIFICATIONS
ROCKWELL - DEFENDER NARROW STYLE MORTISE LOCK WITH PANIC RELEASE FEATURE
TESTED TO OVER 100,000 OPERATING CYCLES.
HANDING - Non Handed
LATCH -
DEADBOLT - 3/4” throw
KEY BACKSET - 1.377”
HANDLE LOCK HOLE LOCATION - 3.622”
Heavy gauge construction in zinc-dichromate steel.
Right hand doors.
Built for security and safety, the defender mortise
lock is Non-handed and field reversible for Left or
Narrow backset ideal for narrow style doors.
AB
9.173
3.62
A B Part Number
1.377” 70235110 1.969”
702 DEFENDER MORTISE LOCK WITH
* For use with all door construction materials
* Field reversible
Built For Security and Safety
GENERAL DESCRIPTION -
• MATERIAL AND FINISH- Heavy gauge steel
with zinc dichromate finish per ASTM-B633.
• MOUNTING HOLE LOCATIONS -
Per industry practice
•
•
• 1/2” throw
EMERGENCY EGRESS
•
Defender mortise lock for swing doors has a built in
Emergency exit feature. Patented Panic push to
release feature - in a single motion, pushing down
on lever unlocks the deadbolt and retracts the latch
simultaneously to allow for an easy exit. Unlock the
door with one motion by pushing down the lever to
31
®
Mounting dimensions conform to general industry
practice for Multipoint trims. All locks are compatible
with Rockwell swing door handles. Suitable for wood,
vinyl, or aluminum doors. Fits 16mm Eurogroove.
•
unlock and open the door.
YORKSHIRE 200 SERIES NARROW STYLE PATIO DOOR MULTIPOINT LOCK
The Rockwell Yorkshire 200 series Narrow Style
Multipoint lock with deadlocking hooks top and bottom.
Dual opposing deadlocking hooks provide
anti-jemmy and a kickproof feature.
32
MATERIAL AND FINISH :
Heavy gauge steel construction with Stainless Steel
Faceplate. 16mm Eurogroove application.
MOUNTING HOLE CENTER :
Per industry practice
HANDLE TO HOLE LOCATION : 3.622"
KEY BACKSET : 1.377"
DEADBOLT : 3/4" (20mm) throw
LATCH : 1/2" throw
CYCLE TESTING: Cycle tested to over 100,000 cycles
Narrow backset fits most patio doors.
Single Piece construction maintains door panel
integrity while ensuring a simple, trouble free and easy
installation.
Lever operated Multipoint lock provides maximum
compression and sealing between door and frame
Non-handed and field reversible.
Precision engineered components for a smooth and
reliable operation.
Multipoint locks are available with compatible Rockwell
Narrow Style Multipoint lock door handles.
Part Number Material
20212200 Steel
®
SPECIFICATIONS
Eurolox Narrow style Multipoint mortise lock for garden or patio doors are available with deadlocking hooks top and bottom.
One piece construction maintains door panel integrity while ensuring a simple, trouble free and easy installation.
3.74
3.94
Suitable for narrow style wood, vinyl, or aluminum doors.
Field reversible with a screwdriver.
Adjustable strike plates allow for field adjustment.
Part Number Material
2026497.1 Steel
All locks are available with compatible Rockwell Narrow Style multipoint swing door handles
33
Triple locking points provide security and the lever operated hooks provide maximum compression and sealing across the door and frame. Precision engineered components for a smooth and reliable operation.
Mounting dimensions conform to general industrypractice for Multipoint trims.
MATERIAL AND FINISH :
Heavy gauge steel with zinc dichromate
finish per ASTM-B633
MOUNTING HOLE CENTER : Per Industry practice
HANDLE TO HOLE LOCATION : 3.622”
KEY BACKSET : 1"
DEADBOLT : 3/4" throw
FACEPLATE: 18mm Eurogroove application.
6.77
32.56
55.12
1"
27.39
3.62
3.74
5.30
9.17
26.00
17.68
1.71
CYCLE TESTING: Tested to over 100,000 cycles
ROCKWELL TL10 MULTIPOINT LOCKFOR AMERICAN ENTRY DOORS
SPECIFICATIONS
®
NARROW STYLE CONTEMPORARY MULTIPOINT LOCK TRIM SETWITH DELTA LEVER
NARROW STYLE CONTEMPORARY MULTIPOINT LOCK TRIM SETWITH DAHLI LEVER
34
MATERIAL: Solid Forged Brass Construction
DOOR THICKNESS : 1-3/4" or 2-3/8”
CYLINDER : 90 degree Europrofile Cylinder
4.468
8.740 2.756
3.622
1.496
1.378
2.285
Part Number Finish
62603304
62603371
62603303
Oil Rubbed Bronze
Brass
Brushed Nickel
Part Number Finish
62633304
62633303
Oil Rubbed Bronze
Brushed Nickel
6260 Series
®
MATERIAL: Solid Forged Brass Construction
DOOR THICKNESS : 1-3/4" or 2-3/8”
CYLINDER : 90 degree Europrofile Cylinder
6263 Series
4.0
8.740 2.756
3.622
1.496
1.378
2.203
NARROW STYLE WINDSOR MULTIPOINT LOCK TRIM SET
35
MATERIAL: Solid Brass Drop Forged Construction
CYLINDER : 90 degree Europrofile Cylinder
DOOR THICKNESS: 1-3/4” or 2-3/8”
Part Number Finish
61093304
61093371
61093303
Oil Rubbed Bronze
Brass
Brushed Nickel
3.622”
1.496”
2.756”
3.925” 8.740”
1.378”
2.230”
NARROW STYLE 6500 MULTIPOINT LOCK TRIM SET
MATERIAL: Solid Forged Brass Construction
DOOR THICKNESS : 1.5" or 1-3/4"
CYLINDER : Anti-bump, 5 pin SC1 keyway, pin
depths and increments.
Part Number Finish
20265001
20265003
20265014
Brass
Brushed Nickel
Black
7.71
7”0.
47”
0.47
”
1.083”
3.819”
3.03
1”
8.66
1”
3.62
2”
6109 Series
®
2026 Series
NARROW STYLE 5128MULTIPOINT LOCK TRIM SET
36
MATERIAL: Stainless Steel
DOOR THICKNESS : 1-3/4" or 2-3/8”
CYLINDER : Anti-bump, 5 pin SC1 keyway, pin
depths and increments.
MATERIAL : Aluminum construction
FINISH : WHITE
DOOR THICKNESS: 2-3/8”
NARROW STYLE 5100 MULTIPOINT LOCK TRIM SET
34 [1.33"]
245
[9.6
4"]
44 [1
.73"
]92
[3.6
2"]
75 [2
.95"
]73
[2.8
7"]123 [4.83"]
5128 Series
®
51105 Series
Part Number Finish
51105551 White
511055514 Black
Part Number
51285368BS Entry
51285166BS Dummy
5129233BS Entry
CTC
85 MM
85 MM
92 MM
37
Rockwell Hi-Performance Dual Vertical and Horizontal adjustable hinge comes standard with a Lift off feature along with a concealed ball bearing and a Non-Removable Pin.
Lift-Off Feature
The Lift-Off Feature allows for a Faster installation and removalof the door panel where NO Tools are Required, saving time and money.
Conveniently transport and prevent damage to doors on thejob site by easily removing and reinstalling the door panel. No removal of pins or screws to remove the door.
Hi-Performance Independently third party tested to exceed ANSI/BHMA 156.1 Grade 3 standard for 350,000 cycles with 3 hinges on a 180 lbs Door panel.
Adjustability
Dual vertical and horizontal adjustment comes standard on all hinges. No separate set and guide hinges.
1/4” Vertical Adjustment and 0.15” horizontal adjustment with Visual adjustment indicator. Drift prevention feature ensures adjusted hinges do not drift or move out of the adjusted position.
Adjust vertically and horizontally with a hand screwdriver. Combination head screw avoids screw stripping issues.
One step routing simplifies door preparation. Fits industry standard template.
Strength and Durability
Heavy Gauge All Metal Construction.
No Plastic or Synthetic Parts.
Heavy Duty 7/16” diameter Pin for extra strength.
Concealed ball bearing located inside the hinge knuckle for an aesthetically cleaner look.
Smooth Operation
Concealed Hardened 3/8” Ball Bearing ensures ease of operation and improves cycle life.
Security
Built-in Non-removable Pin comes standard making it suitable for both Inswing and Outswing applications.
Maximum adjusted door weight : 180 lbs. 3 hinges. 240 lbs. 4 hinges
HIGH PERFORMANCE ADJUSTABLE LIFT OFF CONCEALED BALL BEARING HINGE
®
38
Rockwell Hi-Performance Lift-Off Hinge Technical Data Sheet
Part Numbers: 1228 series and 1230 series
Hi-Performance Lift Off Hinge is suitable for Medium to high frequency Residential door applications according to ANSI/ BHMA 156.1. The Rockwell Hi-Performance Hinge has been independently tested to exceed ANSI/BHMA 156.1 with 3 hinges on a 180 lbs door for 350,000 cycles.
Minimum Door Thickness: 1-3/4” (44mm) Maximum Adjusted Door Weight with 3 hinges: 180 lbs. Maximum Adjusted Door Weight with 4 hinges: 240 lbs.
Installation Instructions
Rockwell Hi-Performance Lift Off Hinges are Handed.
The Hinge body with the Pin is fitted onto the door panel with the Pin Pointing Down. The Hinge leaf with the Knuckle is installed on the door Frame with the knuckle hole pointing up to receive the Pin.
Hi-Performance Lift Off Hinges are precisely manufactured with minimum clearances or play. Ensure the Hinge Body and Hinge leaf are accurately installed on both horizontal and vertical planes and the axis of the Hinge Pin and Hinge Knuckle are Inline.
Hi-Performance Lift Off Hinges are pre-lubricated. Depending on the extreme weather conditions the hinge may need lubrication. Lithium Grease is the recommended lubricant.
Please take care not to damage the Stainless Steel Washer when assembling the door panel to the Frame.
Prepare the Door Panel and the Frame. Mark and Mortise both the door panel and Frame.
Drill Pilot holes, in the size to suit the door material being used.
Fasten hinge bodies to the Door Panel using #10 screws. Minimum 1-1/4” length is recommended on the door Panel.
Ensure the hinge Pin is pointing down.
Fasten the hinge leaf onto the Door Frame, #10 by minimum 3/4” length is recommended. One screwhole is typically left out without a screw and is installed with a 1-1/2” or 2” long screw to reach the stud after the door is positioned into the rough opening.
Screw Lengths and types vary depending on the materials utilized. Ensure screws are fully tightened.
Hinges are pre-set in the Mid-position for 4 way adjustment. Do not adjust hinge until it is positioned into the rough opening to ensure maximum 4 way adjustment. Always adjust hinges vertically prior to horizontal adjustment.
=
10”
10”
10”
10”
CENTER LINE
HINGE POSITIONING 1 HINGE POSITIONING 2
For best results and maximum resistance against warping position the hinges with equal spacing as illustrated. Hinge Positioning
®
HIGH PERFORMANCE ADJUSTABLE LIFT OFF CONCEALED BALL BEARING HINGE
Rockwell Security Inc.
© Rockwell Security Inc. 2017