Multifunctional nanofilms Epilam 2013
-
Upload
epilam-epilams -
Category
Investor Relations
-
view
262 -
download
3
description
Transcript of Multifunctional nanofilms Epilam 2013
Epilam - future coverings
Multifunctional Epilam nanofilms
EPILAM — fluorocontained surface active (lubricant) Compositions, allows to receive on a surface multipurpose protective nanofilms for complex protection of surfaces giving them such properties as: antifriction, anti-oxide, anticorrosion, hydrophobical, bactericidal, antiadhesive
www.epilam.ru
ProblemWater influence, corrosion, hydrophobicity
Wear, damp smell, bacterium
Friction, antiscratches, antifat
Solution Epilame coating technology used to make multifunctional nanosized (3...10 nm) monofilms (antifrictional properties, hydrophobic, increases of corrosion firmness, decrease in influence of radiation, bactericidal, antiscratches, antifat properties).
Fig.2 Profile of the Epilame Coating Surface
Multifunctional Epilam nanofilms application
Bactericidal, anti-deposit, anti-smell Hydrophobical, Water influence, Anticorrosion,
Friction, antiscratches, antifat
Epilam coating properties:
anti-frictional;
anti-corrosion;
anti-adhesion;
hydrophobic and water repellency;
protection from influence of radiation;
bactericidal.
Epilam nanofilms description
Epilam fluorine-containing SAA compositions can be covered by:
dipping;
spraying;
brushing, ets.
using hermetic equipment ;
using ultrasonic equipment;
using convenient forms of covering for manufacturers.
1 – Spiral fluorine-containing SAA molecules;2 – Lubricating medium;3 – Solid Surface.
Fig. 1 Langmuir Palisade on Epilame Coated Solid Surface
Epilam nanofilms coating:
multifunctional nanodimensioned size (3...10 nm);
Langmuir palisade;
modify chemical connects in the surface;
don’t change electrical and power conductors parameters;
surface complex protection.
Advantages
AVTOSTANKOPROM 0,87
Others 0,13
AVTOSTANKOPROM R&D: - optical and electrotechnical- hydrophoby and anticorrosion- bactericidal and antiadhesive - parameters research
- temperature stability: from -160C to +520C - isolation, masking of contacts isn't required- at the soldering the nanofilm does't removed- electrotechnical parameters remain invariable- resistance doesn't change
ALL RIGHTS RESERVED: patents and certificates
We offer:Investment programs and attraction of investments;
Joint research programs;
Contracting with the industrial manufacturers;
Participation in grants, innovations;
Use epilam technology in Your industry.
Thanks for attention!
We protect the beauty!
Andrey MisuryaevThe member of Nanotechnology Society of Russia