1 072315-1-NCL-EN

H2S, CO, O2, LEL

Multi-gas made simple

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. The GasAlertMicroClip features visual compliance at a glance with the flashing, green IntelliFlash™. Easy one-button operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW’s MicroDock II automatic test and calibration system and Fleet Manager II software.

Meets ACGIH 1 ppm H2S TWA recommendations. Visit honeywellanalytics.com to download the latest Fleet Manager II update.

Standard Package Contents• Detector complete with specified sensor(s), stainless steel alligator clip

and concussion-proof housing• Rechargeable battery• Wall outlet charging adaptor• Calibration/test cap and hose• Manual• Multi-language CD manual

General SpecificationsGasAlertMicroClip XL GasAlertMicroClip X3

Size 4.4 x 2.4 x 1.2 in. / 11.3 x 6.0 x 3.1 cm

4.4 x 2.4 x 1.2 in. / 11.3 x 6.0 x 3.1 cm

Weight 6.7 oz. / 190 g 6.3 oz. / 179 g

Temperature -4 to +122°F / -20 to +50°C

Typical battery life 18 hours (recharges in less than 6 hours)Note: Battery is guaranteed to have 12 hour runtime during warranty period under normal operating temperature of 4°F / -20°C to 122°F / 50°C.

Ingress Protection IP68

Certifications and approvals n Class I, Div. 1, Gr. A, B, C, D

ATEX: X g II 1 G Ex ia IIC T4 Ga

IECEx: Ex ia IIC T4 Ga

X: European Conformity

Warranty Full two-year (GasAlertMicroClip XL) or three-year (GasAlertMicroClip X3) warranty including all sensors

Multi-Gas (1–4) Detector

072315-1-NCL-EN 2

Order Number

GasAlertMicroClip 4-Gas Detector GasAlertMicroClip XL GasAlertMicroClip X3

%LEL, O2, H2S, CO MCXL-XWHM-Y-NA MCX3-XWHM-Y-NA

GasAlertMicroClip 3-Gas Detector GasAlertMicroClip XL GasAlertMicroClip X3

%LEL, O2, H2S MCXL-XWH0-Y-NA MCX3-XWH0-Y-NA

%LEL, O2, CO MCXL-XW0M-Y-NA MCX3-XW0M-Y-NA

O2, H2S, CO MCXL-X0HM-Y-NA MCX3-X0HM-Y-NA

GasAlertMicroClip 2-Gas Detector GasAlertMicroClip XL GasAlertMicroClip X3

%LEL, O2 MCXL-XW00-Y-NA MCX3-XW00-Y-NA

H2S, CO MCXL-00HM-Y-NA MCX3-00HM-Y-NA

O2, H2S MCXL-X0H0-Y-NA MCX3-X0H0-Y-NA

O2, CO MCXL-X00M-Y-NA MCX3-X00M-Y-NA

GasAlertMicroClip 1-Gas Detector GasAlertMicroClip XL GasAlertMicroClip X3

O2 MCXL-X000-Y-NA MCX3-X000-Y-NA

H2S MCXL-00H0-Y-NA MCX3-00H0-Y-NA

CO MCXL-000M-Y-NA MCX3-000M-Y-NA

Note: To order a unit with black housing, change order number component "-Y-" to "-B-".

GasAlertMicroClip Region Codes

For orders outside North America, change order number component “-NA” to:

“-EU” Europe “-BR” Brazil

“-UK” United Kingdom “-OR” Other region with 3-pin UK plug

“-AU” Australia “-OE” Other region with 2-pin UK plug

“-CN” China/New Zealand

Gas Legend

%LEL Combustible (W)

O2 Oxygen (X)

H2S Hydrogen sulfide (H)

CO Carbon monoxide (M)

MicroDock IIAutomatic test and calibration station (see MicroDock II section for additional information)

Multi-Gas (1–4) Detector

3 072315-1-NCL-EN

Confined Space Kit Order Number

GasAlertMicroClip deluxe confined space kit - includes manual aspirator kit, IR connectivity kit with Fleet Manager II software, calibration cap with 1 ft. / 0.3 m hose, 0.5 LPM regulator, sampling probe, leather carrying case, auxiliary filter and carrying case with foam insert.Detector and calibration gas sold separately.

MC-CK-DL

Carrying case for GasAlertMicroClip with foam and lid insert MC-CK-CC

Carrying & Protective Accessories Order Number

Neck strap with safety release GA-NS-1

Short strap (6 in. / 15.2 cm) GA-LY-1

Extension strap (4 ft. / 1.2 m) GA-ES-1

Chest harness GA-CH-2

Black leather and PVC carrying holster MC2-LC-1

Auxiliary filter kit (complete with filter adaptor and 5 filters) MC-AF-K1

Auxiliary filter adaptor (no filters) MC-AF-1

Auxiliary filter replacement for adaptor (kit of 10) MC-SS-AF-K1

Sampling & Testing Equipment Order Number

Manual aspirator pump kit with probe (1 ft. / 0.3 m) MC-AS01

Test cap and hose (1 ft. / 0.3 m) replacement MC-TC-1

Note: For complete list of Sampling & Testing Equipment, please refer to the full Price List or contact Honeywell Analytics.

Power Options and Spares Order Number

Multi-unit (5) cradle charger MC2-C01-MC5

Multi-unit (5) wall outlet power adaptor GA-PA-1-MC5-NA*

12-24 Vdc vehicle power adaptor GA-VPA-1

12-24 Vdc direct-wire power adaptor GA-PA-3

Replacement wall outlet power adaptor GA-PA-1-NA*

*For regions outside North America replace “-NA” with: “-EU” for Europe, “-UK” for United Kingdom and “-AU” for Australia/China.

GasAlertMicroClip (continued)

Deluxe Confined Space KitMC-CK-DLOrder detector and calibration gas separately.

Test CapMC-TC-1

Auxiliary Filter KitMC-AF-K1Easily attaches in the field to protect the internal filter

Manual Aspirator Pump KitMC-AS01For remote sampling; complete with probe, hose, aspirator pump and adaptor cap

Black Leather PVC CaseMC2-LC-1

072315-1-NCL-EN 4

GasAlertMicroClip (continued)

Datalogging Accessories Order Number

IR connectivity kit with Fleet Manager II software GA-USB1-IR

MicroDock II Order Number

MicroDock II Automated Calibration and Testing Station: - Base station and GasAlertMicroClip docking module with charging cable - Base station and GasAlertMicroClip docking module without charging cable - GasAlertMicroClip docking module with charging cable - GasAlertMicroClip docking module without charging cableNote: For complete MicroDock II system configuration information, please refer to the full Price List or contact Honeywell Analytics.

DOCK2-2-1C1P-00-G DOCK2-2-1P-00-G DOCK2-0-1C1P-00-G DOCK2-0-1P-00-G

Replacement Sensor Screens Order Number

Replacement quad sensor screen filters for GasAlertMicroClip XL / X3 (kit of 2) MC2-SS

Replacement quad sensor screen filters for GasAlertMicroClip XL / X3 (kit of 10) MC2-SS-K1

Replacement Sensors Order Number

Replacement MICROpeL® combustible (LEL) sensor SR-W-MP75C

Replacement oxygen (O2) sensor (2 year, for GasAlertMicroClip XL) SR-X2V

Replacement oxygen (O2) sensor (3 year, for GasAlertMicroClip X3) SR-X3P

Replacement MICROceL® hydrogen sulfide (H2S) sensor SR-H-MC

Replacement MICROceL® carbon monoxide (CO) sensor SR-M-MC

Dummy sensor for combustible (LEL) sensor location SR-W-MC-DUM

Dummy sensor for the oxygen sensor location SR-DUMM1

Dummy sensor for toxic sensor locations SR-TOX-MC-DUM

Calibration & Testing Equipment Order Number

Quad-gas: CH4 (2.5%), O2 (18.0%), H2S (25 ppm), CO (100 ppm), 34 L, balance N2 (requires REG-DF-1 or REG-0.5)

CG-Q34-4

Quad-gas: CH4 (2.5%), O2 (18.0%), H2S (25 ppm), CO (100 ppm), 58 L, balance N2 (requires REG-DF-1 or REG-0.5)

CG-Q58-4

Demand flow regulator (for use with MicroDock II) REG-DF-1

Calibration gas regulator (0.5 LPM) REG-0.5

Calibration hose, Tygon (1 ft. / 0.3 m, 1/8 in. I.D., 1/4 in. O.D.) C2-HOSE1-1

Wall mount (adjustable) for 34, 58, 103 L gas cylinders, red MK-CG2-58

For a full list of calibration and testing equipment, please refer to the full Price List or contact Honeywell Analytics.

IR Connectivity KitGA-USB1-IRUse for data download and instrument set-up options

Vehicle Power Adaptor 12-24 Vdc

GA-VPA-1

Direct-Wire Power Adaptor 12-24 Vdc

GA-PA-3

Multi-Unit Power AdaptorGA-PA-1-MC5-NA*Simultaneously charges five detectors

Multi-Unit Cradle ChargerMC2-C01-MC5Simultaneously charges five detectors

5 072315-1-NCL-EN

GasAlertMicroClip (continued)

B

C

D

E F

G

H

I

J

A

Note: Please refer to the instrument’s documentation (shipped with the product or available at www.gasmonitors.com) for complete instructions on common service procedures. Improper servicing or maintenance may affect warranty eligibility. Honeywell assumes no liability for damages resulting from improper servicing or maintenance.

072315-1-NCL-EN 6

GasAlertMicroClip (continued)

Legend Service Parts Order Number

A Replacement LCD kit for GasAlertMicroClip XL / X3 MC-LCD-K1

B

Replacement front enclosure (yellow) for GasAlertMicroClip XL MCXL-FC1

Replacement front enclosure (black) for GasAlertMicroClip XL MCXL-FC1B

Replacement front enclosure (yellow) for GasAlertMicroClip X3 MCX3-FC1

Replacement front enclosure (black) for GasAlertMicroClip X3 MCX3-FC1B

C Replacement combustible sensor, see page 4

DReplacement main PCB with battery and screws for GasAlertMicroClip XL MCXL-MPCB1

Replacement main PCB with battery and screws for GasAlertMicroClip X3 MCX3-MPCB1

Replacement Flex PCB for GasAlertMicroClip XL MC2-FPCB1

Replacement Flex PCB for GasAlertMicroClip X3 MCX3-FPCB1

E

Replacement back enclosure (yellow) with screws and alligator clip for GasAlertMicroClip XL MCXL-BC1

Replacement back enclosure (black) with screws and alligator clip for GasAlertMicroClip XL MCXL-BC1B

Replacement back enclosure (yellow) with screws and alligator clip for GasAlertMicroClip X3 MCX3-BC1

Replacement back enclosure (black) with screws and alligator clip for GasAlertMicroClip X3 MCX3-BC1B

F Replacement screws (kit of 20) MC-SCREW-K1

G, H, I Replacement toxic and oxygen sensors, see page 4

J Replacement sensor screen, see page 4

Replacement vibration motor GA-VM-2

Note: Please refer to the instrument’s documentation (shipped with the product or available at www.gasmonitors.com) for complete instructions on common service procedures. Improper servicing or maintenance may affect warranty eligibility. Honeywell assumes no liability for damages resulting from improper servicing or maintenance.

How to Replace a Sensor1. With detector OFF, use No. 1 Phillips screwdriver to remove 6

screws from back enclosure (E)2. Lift back enclosure (E) straight up3. Use No. 1 Phillips screwdriver to remove 2 screws from back

of PCB (D)4. Lift PCB (D) together with battery and sensors (C, G, H, I)

straight up5. Remove sensors (C, G, or H) by sliding out or sensor (I) by

pulling straight up from PCB (D)6. Insert new sensor (C, G, H, I) into PCB (D)7. Replace PCB (D) and 2 screws and hand-tighten until firm8. Replace back enclosure (E)9. Replace 6 screws in back enclosure (E) and

hand-tighten until firm

How to Replace the Sensor Screen1. With detector OFF, use No. 1 Phillips screwdriver to remove 6

screws from back enclosure (E)2. Lift back enclosure (E) straight up3. Use No. 1 Phillips screwdriver to remove 2 screws from back

of PCB (D)4. Lift PCB (D) together with battery and sensors (C, G, H, I)

straight up5. Remove sensor screen (J) from front enclosure (B) 6. Insert new sensor screen (J) into front enclosure (B)7. Replace PCB (D) and 2 screws and hand-tighten until firm8. Replace back enclosure (E)9. Replace 6 screws in back enclosure (E) and

hand-tighten until firm