MÜPRO 4. Support channels 6. Anchor points/expansion ... · nominal pipe size of up to 400 mm; M10...
Transcript of MÜPRO 4. Support channels 6. Anchor points/expansion ... · nominal pipe size of up to 400 mm; M10...
MÜPRO
1. Vibration control
2. Fire protection
3. Pipe clamps
4. Support channels
5. Accessories
6. Anchor points/expansion points
7. Heavy-duty pipe support
8. MPT-Support system
9. Ventilation
10. Pipe connectors
11. Stainless steel
12. Hot-dip galvanised products
13. Anchor plugs
14. Nameplates
15. Insulation
16. Sealing and protection materials
17. Tools
18. Radiator fastening
19. Technical information
Duct clamps 9/1–9/4
Mounting bases for flat roof installation 9/5
Duct fixing bracket 9/6–9/7
Duct fixing angles 9/8
Duct joint clamps 9/9
Self-drilling screws 9/10
Blind rivets 9/10
Glazing tapes 9/11
Foam rubbers 9/11
Sealing tape 9/12
Cold shrink tape 9/12
Sealing compound for air ducts 9/13
Pipe nominal size [mm]
Connecting thread Part no. Sales unit Pack unit
80 M8/M10 143247 100 pieces90 143248
100 143249112 143250125 143251140 143252 50150 143253160 143254180 143255 25200 143256224 143257250 143258280 143259300 143260315 143261355 143262400 143263 1450 143264500 143265560 143266600 143267630 143268710 143269800 143270
! �������������� ���������������������������������������������������������������������������
with DÄMMGULAST® orange, galvanisedDuct clamps
Field of application �For attachment of spiral-seam pipes
Advantages �Manufactured to suit spiral-seam dimensions �Practical latchening fastener: simple and secure insertion and fastening of the pipe due to quick fastener for nominal pipe size of up to 450 mm, M8 hexagon screws for pipe sizes from 450 mm and upwards �Easy installation due to the wide opening angle of the clamp �Added rigidity due to the grooved design of the duct clamp �Easy clicking-in of the fastening bolt ����������������������
�High level of safety due to the hinge-like opening �No inadvertent opening once it has clicked in �The easy click-in fastener allows opening and closing of the pipe clamp with only one hand �DÄMMGULAST® Vibration control ����������������������������������stripe: average vibration reduction of 18 db(A) �Manufactured to suite connecting thread M8/M10 � This product is awarded with the “Gütezeichen Rohrbefestigung” (quality mark of pipe support) and is submitted to controls according to RAL-GZ 655-B
VENTILATION02
/15
9/1 © ����� - progress and quality
Pipe nominal size [mm]
Dimensions [mm]
V b x s B b1 H H1
80 M5 20 x 1.5 124 23 65 11490 137 70 124
100 149 76 135112 157 82 147125 170 88 160140 185 96 175150 195 101 185160 205 106 195180 225 116 215200 245 126 235224 M6 25 x 1.5 286 28 138 259250 312 151 285280 342 166 315300 363 177 336315 378 184 351355 418 204 391400 25 x 2.0 462 227 436450 513 253 487500 M8 567 278 538560 25 x 2.5 627 308 598600 667 328 638630 697 343 668710 777 383 748800 867 428 838
FeaturesVibration control
Nominal pipe diameter
[mm]
Max. recommended load [N]
������ 700������� 1,000������� 1,200
Duct clampswith DÄMMGULAST® orange, galvanised
VENTILATION02/15
9/2 © ����� - progress and quality
Pipe nominal size [mm]
Connecting thread Part no. Sales unit Pack unit
80 M8/M10 147092 50 pieces90 147093
100 147094112 147095125 147096140 147097150 147098160 147099180 147100200 147101224 115657250 115663280 115669300 115672315 115678355 115681400 115687450 115690 1500 115693560 115696600 115699630 115704710 115710800 115716
! �������������� ���������������������������������������������������������������������������
i For stainless steel version (without lining or with DÄMMGULAST® Junior lining) please refer to chapter ������������������
without lining, galvanisedDuct clamps
Field of application �For attachment of spiral-seam pipes
Advantages �Two-part single bossed clamp with welded-on M8 connecting nut or M8/M10 combination nut (for pipes ��������������������� �Manufactured to suit spiral-seam dimensions �The 2 locking screws allow adjustment to accommodate a greater variation in pipe diameter
�Locking screws with combi-cross slit head and captive washer convenient for screwdrivers and nominal pipe size of up to 400 mm; M10 Hexagon screws for pipe sizes from 450 mm and upwards
VENTILATION02
/15
9/3 © ����� - progress and quality
Pipe nominal size [mm]
Dimensions [mm]
V b x s B H H1
80 M6 25 x 1.5 125 59 10290 135 64 112
100 146 70 123112 158 76 135125 171 82 148140 186 90 163150 196 95 173160 206 100 183180 226 110 203200 246 120 223224 25 x 2.5 272 131 247250 298 144 273280 328 159 303300 349 170 324315 364 177 339355 404 197 379400 449 220 424450 M10 515 245 474500 565 270 524560 625 300 584600 665 320 624630 25 x 3.0 696 335 655710 776 375 735800 866 420 825
Features
Max. recommended load [N] 500
Pipe nominal size 224 to 800 mmPipe nominal size 80 to 200 mm
Duct clampswithout lining, galvanised
VENTILATION02/15
9/4 © ����� - progress and quality
Dimensions B [mm]
Part no. Sales unit Pack unit weight [kg/piece]
304 155693 1 pieces 2.250456 155694 4.500
Mounting base
Mounting base adapter
Installation directionFeatures
Material Recycled polypropylene pellets with additivesTemperature range –30 °C to +80 °CMax. recommended loading 2,750 N
For support channel Part no. Sales unit Pack unit
Mounting base adapter, hot-dip galvanised
38/40 156892 1 pieces
! !����������������������" ������� ���������������������������������������������� ������#�����������
���������� �����������������������
Field of application � Installation of pipes, ventilation �����$��� ������������%��������� without roof penetration
Advantages �Fast and easy installation on site for mounting pipes, cable ducts, �� ������������� �&������'������%�*� ��������������������� �The size 38/40 MPC-Support channels are inserted into the plastic feet using an adapter �Load handling without penetrating the roof membrane �Good weight distribution and low deadweight �Retroactive roof repair is simple
VENTILATION02
/15
9/5 © ����� - progress and quality
Part no. Sales unit Pack unit
116516 100 pieces
FeaturesVibration control
Max. recommended load [N] 230
with insulator, galvanised������������� �
Field of application �For vibration-isolated suspension of round and rectangular air ducts �+�������������������������$�������on trapezoidal corrugated metal sheeting for the suspension of MPC-Support channels
Advantages �DÄMMGULAST® Spring element ������������������������*���� ���#�� �Average vibration reduction of 16 dB(A) � Ideal adaptation to all duct diameters and cross-sections due to pre-determined bending points �Simple attachment to the air duct with rivets or self-drilling screws ������������������������*����bracket from threaded rods or direct attachment to the structure
VENTILATION02/15
9/6 © ����� - progress and quality
!��������������������������������������������*����bracket, steel tape or punched tape
.���������������������������������������������������*����brackets, threaded rods and steel anchors
Vibration damped attachment of a MPC-Support channel ���������������������������������������������������*����bracket
Direct attachment to trapezoidal corrugated steel sheet �������������*���� ���#��
!
������������� �with insulator, galvanised
<���������"���������=>>?@K!�<O������������������������������������������'�������������������" �����'� ������� <���������������������������������������������������<������'�����'� ��������������� ���������������������������������������������<���������*���� ���#����������������������������������������������������'���������������������������
VENTILATION02
/15
9/7 © ����� - progress and quality
Type Part no. Sales unit Pack unit
����������� �� with insulator, galvanised
I 116579 100 piecesII 116635 50
�������������� �� with insulator, galvanised
I 116543 100II 116546 50
��������������� single 12 x 24 x 4 mm 113092 10012 x 24 x 6 mm 113094
! ������*�������������������"�����������������'���� ��������������������
������*��������"������������*����������
FeaturesVibration control
Type Max. recommended load [N]
Average vibration reduction [dB(A)]
I 230 16II 800 17
������*��������"������ Type II
������*��������"������ Type I
������*���������� Type II
������*���������� Type I
with insulator, galvanised������������� �
Field of application �Easy to install suspension for air ducts
Advantages � Incorporated highly-elastic vibration-isolating element �Excellent alignment and height adjustment via the threaded rods �Design as angle and twin-angle �Various attachment options to air duct with rivets, self-drilling screws or bolts up to M8 in the oblong hole �Direct attachment to building structure possible �Average vibration reduction of 17 dB(A)
VENTILATION02/15
9/8 © ����� - progress and quality
Type Hexagon head bolts
Part no. Sales unit Pack unit Dimensions [mm]
A B C D s
galvanised M8/20 116570 100 pieces 35 20 17 23 3.0 x 30116576 31 23 18 4.0 x 30
V2A 116567 33 18 14 23 3.0 x 30
! Normally recommended spacing 300��QQ���W�����������������������������������������XQQ�$������������������ ��������������������������������
Duct joint clamps
Field of application ����������Y���#�%����������������for large cross-section ducts and high pressure conditions
Advantages �No pre-clamping or drilling required �Supplied with hexagon head bolt already inserted �High load capacity due to reinforcing rib
VENTILATION02
/15
9/9 © ����� - progress and quality
Self-drilling screwsDIN 7504, with hexagonal head, for the attachment of air pipes, ducts, spiral-seam pipes, without pre-drilling, galvanised
Length [mm]
Sheet thread [mm]
Screw head Ø [mm]
Spanner size S [mm]
Part no. Sales unit Pack unit
13 4.2 8.5 7 106661 500 pieces16 10666319 10666522 10666613 4.8 10.0 8 10666816 10667019 10667138 10667232 5.5 10.5 10667316 6.3 12.7 10 10667425 10667532 10667645 10667713 4.2 9.0 7 106662 1 carton*
4.8 10.0 8 106669[��\�� �*������]QQ�������������������
Self-drilling screwswith building regulation approval, for attachment on trapezoid sheet according to approval Z-14.1-4, galvanised
Length [mm]
Sheet thread [mm]
Screw head Ø [mm]
Spanner size S [mm]
Part no. Sales unit Pack unit
16 4.2 9 7 147874 500 pieces19 4.8 10 8 147875
Blind rivet
Field of application �W��������������������������*����angles and brackets on air ducts and spiral-seam tubes respectively
Advantages �Blind rivet with large surface in order to secure various materials �No surface damaging after riveting �^������������ �����������%�-ences (vibration resistant) �Good behaviour at temperature %���������� �High-quality, simple and quick mounting
Type Material sleeve
Material mandrel
Part no. Sales unit Pack unit Dimensions [mm]
D1 L E D2 K W
�� �������� aluminium steel 140665 500 pieces 3,2 9.5 ������� 6.2 1.0 1.65140927 4,0 11.0 ������� 7.9 1.2 2.20140928 4,8 14.5 ������� 9.3 1.5 2.65
VENTILATION02/15
9/10 © ����� - progress and quality
for air ducts, self-adhesive and reinforcedGlazing tapes
Field of application � Ideal for sealings in air duct installations
Advantages �Closed-pore polyethylene tape �Exceptionally good adhesion �Self-adhesive on one side, ��������������_`��� �Colour: black �Free of plasticizer �<������"����������������� ����������
Width [mm]
Thickness [mm]
Length of roll [m]
Part no. Sales unit Pack unit
9 4 25 127502 10 roll6 10 127506
12 4 20 127493 515 127499
! {������������������\�|]Q�����_`"��������������"������'�������
self-adhesiveFoam rubbers
Field of application �Applicable for sealings of air ducts and spiral-seam tubes respectively
Advantages �Closed-pore natural rubber tape �Resistant to temperatures from �40 °C to +80 °C �One-sided self-adhesive, protected �����_`"�� �Colour: black �Resistant to dilute acids and alkalis, ���������������������
Width [mm]
Thickness [mm]
Length of roll [m]
Part no. Sales unit Pack unit
10 5 10 128567 1 roll15 12856924 3 128571
VENTILATION02
/15
9/11 © ����� - progress and quality
Sealing tape
Field of application �For permanent sealing of ventila-tion lines and fresh air conduits
Advantages �Tear-proof, supple, soft PVC adhesive tape �Aging resistant, natural rubber adhesive with high glue strength and shear strength �Colour: silver grey
Width [mm]
Thickness [mm]
Length of roll [m]
Part no. Sales unit Pack unit
50 0.14 25 116513 1 roll
�������������
Field of application �For permanent sealing of ventila-tion lines and fresh air conduits �For wind-proof and steam-proof agglutinating of foils
Advantages �Self-adhesive �The carrier is a tear-resistant alu-minium polyester composite coated with a cold sealing butyl rubber adhesive �Reliably bonds and seals metal, plastic, masonry, concrete and wood �Colour: silver grey
Width [mm]
Thickness [mm]
Length of roll [m]
Part no. Sales unit Pack unit
50 0.62 10 112895 1 roll
VENTILATION02/15
9/12 © ����� - progress and quality
Colour Filling cartridge [ml]
Part no. Sales unit Pack unit
grey 310 141148 1 pieces
i W��������������������������������������������������������������������������
Features
Basis PolyacrylateDensity 1.53 g/mlConsistence Soft pastyTemperature range ����������������Working temperature +5 °C to +50 °COpen time (+23 °C / 50 % relative humidity) �� �����������!��
Sealing compound for air ducts
Field of application � Ideally suited for sealing of galvanised steel sheets, in the construction of ventilation ducts and plant engineering
Advantages �Very good adhesion even on moist surfaces �Simple and quick processing when used with common cartridge application guns �Silicone-free
�Odourless and not corrosive as well as chemically neutral �Remains permanently elastic and self-adhesive
VENTILATION02
/15
9/13 © ����� - progress and quality