MTech_ final_ppt
-
Upload
rajesh-kumar -
Category
Technology
-
view
2.676 -
download
2
Transcript of MTech_ final_ppt
![Page 1: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/1.jpg)
Stress Analysis of Doors and WindowsStress Analysis of Doors and WindowsStress Analysis of Doors and WindowsStress Analysis of Doors and Windows
of BOEINGof BOEINGof BOEINGof BOEING����787 under Uniform Shear at Infinity787 under Uniform Shear at Infinity787 under Uniform Shear at Infinity787 under Uniform Shear at Infinity
Rajesh Kumar08310031
M.Tech. (Design)
Guide: Prof. V.G. UkadgaonkerGuide: Prof. V.G. Ukadgaonker
Department of Mechanical Engineering
Indian Institute of Technology, Bombay
May, 2010
![Page 2: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/2.jpg)
Outline� Introduction
� Boeing-787
� Forces and Their Effect
� ProblemDefinition
� Literature Review
� Complex Variable Method
� Schwarz Alternating Technique
� Mapping of Door andWindow
� Mathematical Formulation
� Finite Element Analysis
� Results
� Conclusions and Future Prospects
� References
![Page 3: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/3.jpg)
Introduction• Aircraft design
• Optimum material utilization
• High fatigue strength with minimum weight
• Non-uniform stress distribution in components
• Irregularities
• Intrinsic defect /Flaws
• Functional features like door, window, hole for fasteners, keyways etc.
• Manufacturing defect• Manufacturing defect
• Non-uniform stress distribution causes localization of stress in the vicinity
of any discontinuity (Stress Concentration)
• Stress analysis is a tool to know stresses and its direction at various points
• Major failures occurs due to crack initiation at points of maximum stress
concentration (Critical points)
• Stress Concentration Factor
![Page 4: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/4.jpg)
Boeing-787
A mid-sized, wide-body jet airliner currently under development by Boeing Commercial Airplanes
Composite materials to construct fuselage - 15% Al, 50% composites and 12% titanium
Allows high cabin pressure during flight Ref [1]
Openings – passenger door, emergency door, cargo door and windows
Main passenger door and the Window nearest to this door - Dimensions
*All Dims in inchesMaterial Properties : E1=139.3 Gpa, E2=11.3 Gpa, G12=6 Gpa, ν21=0.3,ν23=0.4
![Page 5: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/5.jpg)
Forces and Their Effect� During the steady flight, main forces acting on
aircraft fuselage are
1. Body forces - Differential internal pressure-Hoop and longitudinal stresses (Biaxialtensile state)
2. Engine thrust and wing drag - Engine thrustacts in forward direction, wind drag acts inthe opposite direction of the motion of theaircraft – Longitudinal bending moment(out of plane load)(out of plane load)
3. Due to manoeuvering of aircraft -Differential pressure acts on the wings whiletaking turn in air+inertia of the aircraft -torsional forces - Shear stresses in theaircraft skin
![Page 6: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/6.jpg)
Problem DefinitionTo obtain stress concentration factor around the rectangular door and
window of the Boeing-787 aircraft subjected to uniform shear at infinity.
Also, to obtain the stress concentration factor around the door due to the
interaction effect of the presence of a nearby window and vice versa.
As the radius of
curvature of fuselage iscurvature of fuselage is
large compared to the
dimensions of the doors
and window, the fuselage
is modelled as an infinite
plate with single and
multiple openings.
![Page 7: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/7.jpg)
Literature ReviewSingle Hole Problem
• Krisch and Muskhelishvili --- the problem of infinite plate with singlecircular hole subjected to uniaxial stress at infinity
• Krisch --- Airy's stress function, Muskhelishvili --- complex variablemethod
• Muskhelishvili --- various boundary value problem --- complex variablemethod and conformal mapping technique
• Lekhnitskii --- the problem of anisotropic plates --- both in-plane andout of plane loading --- stress functions by series method
• Savin --- isotropic and anisotropic plates --- conformal mapping ---• Savin --- isotropic and anisotropic plates --- conformal mapping ---circular, triangular, rectangular and elliptical single hole
• Ukadgaonker and Awasare --- principle of superposition andMuskhelishvili’s complex variable approach --- solution for infinite platecontaining, circular, elliptical, triangular, rectangular holes --- ellipticalhole in anisotropic medium
• Ukadgaonker and Rao --- solution for stress field around various holegeometries in an anisotropic medium --- subjected to biaxial and shearstress at infinity, uniform internal pressure at hole boundary, uniformshear stress at hole boundary in detail
![Page 8: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/8.jpg)
Two Hole Problem
• Ukadgoanker and Avarigarimath --- infinite plate having two unequal
collinear elliptical holes subjected to uniaxial tension and uniform shear
--- complex variable approach as well as FEM
• Ukadgaonker and Koranne --- infinite plate containing two unequal
arbitrary oriented elliptical holes and cracks subjected to uniaxial tensile
and shear loading --- complex variable approach, method of
Literature Review (continued…)
photoelasticity, FEM
• Ukadgaonker and Awasare --- interaction effect of rectangular and
arbitrarily oriented elliptical hole in infinite plate subjected to uniform
tensile loading at infinity
• Ukadgaonker and Sharma --- infinite plate containing two unequal
arbitrarily oriented circular holes --- biaxial tensile, uniform shear,
biaxial moment and torsion --- complex variable approach and FEM
![Page 9: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/9.jpg)
Door and Windows of Passenger Aircraft
� Gandhi --- door and windows of Boeing-747 --- analytical formulation fora single rectangular hole for tensile loading --- problem of multipleopening done by FEM
� Upadhyay, Sharma --- door and windows of Boeing-777 aircraft --- stressfunctions for single rectangular hole under tensile load and bendingmoment (Upadhyay) and under biaxial bending (Sharma)
� Shrivastava --- door and windows of Boeing-777 aircraft with FEM ---effect on stress field of one hole due to the presence of another hole in its
Literature Review (continued…)
vicinity using ANSYS
� Vasnik --- door and windows of Boeing-777 with crack --- stress intensityfactor were obtained using FEM as well as complex variable approach
Gaps Identified in Literature
• Very few analytical solutions are available considering rectangular hole inan infinite plate of anisotropic material.
• The interaction effect of two rectangular holes has not been yet studiedusing Schwarz’s alternating method.
![Page 10: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/10.jpg)
Schwarz’s Alternating Technique
• The problem of multiply connected regions is solved as simply connectedregion and successively relaxing the boundary conditions on the holes.
• First complex solution in terms of stress functions is obtained for platewithout hole by mapping the physical Z-plane into ζ-plane.
• Boundary condition at the fictitious circular hole is determined usingthese stress functions.
• The second approximate solution is obtained by the application of thenegative value of the boundary condition on the circular boundary.
• Addition of these two solutions gives the solution valid near the circular• Addition of these two solutions gives the solution valid near the circularhole.
Solution of single hole problem
![Page 11: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/11.jpg)
Mapping of Door and WindowConformal Mapping• A conformal map is a function which preserves angles.• Any conformal mapping of a complex variable which has continuouspartial derivatives is analytic. An analytic function is conformal at anypoint where it has a nonzero derivative.• Conformal mapping helps in transforming very complicated shapes intomuch simpler ones.•It allow the basic complex variable formulations to extend to thetransformed problem.• Generalized form of mapping function for Door and Window• Generalized form of mapping function for Door and Window
![Page 12: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/12.jpg)
• Mapping Constants
▫ Door
▫ Window
m1
m3
m5
m7
R
-0.2570 -0.1555 0.0240 0.0111 34.3980
m1
m3
m5
R
-0.2460 -0.1565 .0231 8.6500
• Door and window generated by using Matlab
Mapping of Door and Window (continued…)
Window
Door
In mapped plane
![Page 13: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/13.jpg)
Complex Variable ApproachGeneralised Hooke’s law for plane stress
Stresses in terms of Airy’s stress function
Biharmonic equation asCompatibility equation for2D- elasticity problem
Its roots are,
Hence,
Introducing the stress functions φ(z1), ψ(z2) and their conjugate
![Page 14: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/14.jpg)
Stresses in terms of stress functions are
Complex Variable Approach (continued…)
We can obtain the solution using the following steps
• First stage solution
• Second stage solution
• First Approximation
• Second Approximation
![Page 15: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/15.jpg)
Boundary Conditions
Stress Function of Single Hole Problem under Remote Loading
First Stage – Stress functions for hole free plate
Second Stage – Plate having single rectangular hole
Mathematical Formulation
Second Stage – Plate having single rectangular hole
where
![Page 16: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/16.jpg)
From Schwarz’s technique,
where
Mathematical Formulation (continued…)
Final Solution – Obtained by superposition of the stress functions of the first and the second stage
These stress functions give the stresses around rectangular hole.
![Page 17: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/17.jpg)
First Approximation� Stress functions for the door
� Stress functions for the window
(continued…)
� These Stress functions do not consider the interaction effect of door and window.
![Page 18: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/18.jpg)
Second Approximation (Window)
In order to account for the interaction effect of door on the stressfunctions of the window, the stress functions of the door is transformed tothe centre of the window by translation through a distance C0, given by Z0 =ω(C0 ) such that |C0|>1.
(continued…)
ζ
The boundary conditions for anisotropic plate is given by
Corrected stress functions around the window can be given by,
,
![Page 19: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/19.jpg)
Using Cauchy’s integral formulae,
where, a =
(continued…)
![Page 20: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/20.jpg)
and
b
(continued…)
![Page 21: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/21.jpg)
We get the corrected stress functions as
By superposition of transformed and corrected stress functions we get the stress function for window considering the interaction effect of door
(continued…)
Second Approximation (Door)
This gives
Using these stress functions we can find the stresses around door andwindow with interaction effect.
![Page 22: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/22.jpg)
Finite Element Analysis
A numerical technique to find approximate solution of PDE
ANSYS – A software to solve structural, static, transient, etc. problems
Anisotropic thin infinite-plate with plain stress condition
E1=139.3 GPa, E2=11.3 GPa, G12=6 GPa, ν21=0.3, ν23=0.4
Steps involved are- Preprocessing, Solution, Post processingSteps involved are- Preprocessing, Solution, Post processing
PLANE82
� eight nodes having two translational degrees of freedom at each node
� more accurate results for mixed quadrilateral and triangular elements
� well suited to model curved boundaries and have compatible displacement shapes
� has large deflection, large strain capabilities and plasticity Ref: ANSYS Help
![Page 23: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/23.jpg)
Models
Plate: Length=1000 in., Width= 1000 in.
Door: Length= 42 in., Width= 74 in., Corner Radius= 7 in.
Window: Length= 10.74 in., Width= 18.44 in., Corner Radius= 5 in.
Distance between door and window= 58.95 in.
![Page 24: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/24.jpg)
Meshing
![Page 25: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/25.jpg)
Meshing
![Page 26: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/26.jpg)
Meshing
![Page 27: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/27.jpg)
Results (Single Hole)Type of opening Max. Stress Concentration
Factor (SCF)
Error (%) Angular Position
Analytical Numerical
Passenger door 3.44 3.39 1.4 640
Window 2.27 2.16 4.8 680
MATLAB plot of SCF ANSYS plot of SCF
![Page 28: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/28.jpg)
Results (Single hole)
![Page 29: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/29.jpg)
Results (Single hole)
![Page 30: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/30.jpg)
Results (Single hole)
![Page 31: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/31.jpg)
Results (Single hole)
![Page 32: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/32.jpg)
Results (Two Hole)Type of opening Max. Stress Concentration
Factor (SCF)
Error (%) Angular Position
Analytical Numerical
Passenger door 3.44 3.40 1.2 1190
Window 2.24 2.27 1.4 1220
MATLAB plot of SCF ANSYS plot of SCF
![Page 33: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/33.jpg)
Results (Two Hole)
![Page 34: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/34.jpg)
Results (Two Hole)
![Page 35: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/35.jpg)
Results (Two Hole)
![Page 36: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/36.jpg)
Results
Type of opening Max. Stress Concentration Factor (SCF)
Analytical
Difference(%)
Without Interaction With Interaction
Passenger door 3.44 3.44 00
Window 2.27 2.24 1.3
Type of opening Max. Stress Concentration Factor (SCF)
Numerical
Difference(%)
Without Interaction With Interaction
Passenger door 3.39 3.40 0.3
Window 2.16 2.27 4.8
![Page 37: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/37.jpg)
Conclusions
• Higher stress concentrations occur near the corner locations.
• The SCF depends on the side ratio and corner radius.
• Less is the side ratio higher is stress concentration factor.
• Due to interaction, there is negligible change in stress field around door
but the stress field around window gets affected significantly.but the stress field around window gets affected significantly.
• Door has higher maximum SCF compared to window both with and
without interaction effect.
• Analytical and numerical results are in good agreement.
![Page 38: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/38.jpg)
�The variation of SCF for other geometries and with different
parameters like length, width and thickness can be analyzed.
�The problem has been solved for the case of shear loading. The
other loadings can be considered for the analysis like in-plane and out
of plane bending loads.
Future Prospects
of plane bending loads.
�The curvature of aircraft fuselage can be taken into consideration
to solve a problem of three dimensional curved plate subjected to
different loads.
![Page 39: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/39.jpg)
References1. Boeing official website: www.boeing.com.
2. Muskhelishvili, N.I., Some Basic Problems of Mathematical Theory of Elasticity, P. Noordhoff Ltd., Groningen, The Netherlands, 1963.
3. Lekhnitskii, S.G, Anisotropic Plates, Gordon and Breach Science Publishers, New York 1968.
4. Savin, G.N., Stress Concentration around Holes, Pergamom Press New York, 1961.
5. Ukadgaonker,V.G, Awasare, P.J, A Novel Method of Stress Analysis of Infinite Plate with Elliptical Hole with Uniform Tensile Stress, Journal of the Institution of Engineers (India), MC, 73, 1993 pp.309-311.
6. Ukadgaonker,V.G, Awasare, P.J, A Novel Method of Stress Analysis of Infinite Plate with Circular Hole with Uniform Loading at Infinity, Indian Journal of Technology, 31, 1993, pp.539-541.
7. Ukadgaonker,V.G, Awasare, P.J, A Novel Method of Stress Analysis of Infinite Plate with Small Radius Equilateral Triangular hole with Uniform Tensile Stress, Journal of the Institution of Engineers(India), MC, 73, 1993, pp.312-317.
8. Ukadgaonker,V.G, Awasare, P.J, A Novel Method of Stress Analysis of Infinite Plate with Rounded Corners of a Rectangular Hole under Uniform edge Loading, Indian Journal of Engineering and Material Sciences (India), 1994, pp.17-25.
9. Rao, D.K.N., Some General Solutions for Stresses around Holes in Anisotropic Plates, Ph.D. thesis, IIT Bombay, 2000.
10. Ukadgaonker, V.G., A Novel Method of Stress Analysis of Infinite Plate with rounded corners of a rectangular Hole, Indian Journal Technology, 26 (1988) 549-559.
![Page 40: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/40.jpg)
11. Ukadgaonker, V.G. and Avarigarimath, R.R., Stress Analysis Of An infinite Plate Containing Two Unequal Elliptical Holes under In-Plane Stresses at Infinity, Presented at 12th Canadian Congress of Applied Mechanics, Carleton University, Ottawa, Canada, May-June 1989.
12. Ukadgaonker, V.G., Stress Analysis Of A Plate With Two Unequal Circular Holes Subjected To Tangential Stresses, AIAA Journal, pp. 125-128, January 1980.
13. Ukadgaonker, V.G. and Koranne, S.D., Interaction Effect On Stresses In An Infinite Plate With Two Unequal Arbitrary Oriented Elliptical Holes Or Cracks, Proceedings Of International Conference On Advances In Structural Testing, Analysis And Design, Bangalore, pp 996-1001, Aug. 1990.
14. Ukadgaonker, V. G. and Awasare, P. J., Interaction effect of rectangular hole and arbitrarily oriented elliptical hole or crack in infinite plate subjected to uniform tensile loading at infinity, Indian Journal of Engineering & Material Sciences, Vol.6, pp.125-134, June 1999.
15. Sharma, D.S, “Stress analysis of cracks emanating from two unequal circular holes in an anisotropic plate”, Ph. D. Thesis, IIT. Bombay, 2008.
(continued…)
anisotropic plate”, Ph. D. Thesis, IIT. Bombay, 2008.
16. Gandhi, B.S., Stress Analysis of Stiffened Doors and Windows of Boeing-747, M.Tech. Dissertation 2000.
17. Upadhyay, A., Stress Analysis of Boeing-777 Aircraft with Reinforced Doors and Windows, M.Tech. Dissertation 2005.
18. Shrivastava, D., Stress Analysis of Boeing-777 Aircraft Using FEM, M.Tech. Dissertation 2005.
19. Sharma, V., Stresses near the Door and Windows of a Passenger Aircraft Subjected to Biaxial Bending with FEM, M.Tech. Dissertation 2005.
20. Vasnik, T., Stress Analysis of Boeing-777 Aircraft with crack at the Door and Window, M.Tech. Dessertation 2005.
21. Huo, H., Bobet, A., Fernandez, A., Ramirez, J., Analytical Solution for Deep Rectangular Structures Subjected to Far-field Stress, Elsevier, pp. 613 -625, 2005.
![Page 41: MTech_ final_ppt](https://reader035.fdocuments.us/reader035/viewer/2022081403/556da196d8b42a875d8b462d/html5/thumbnails/41.jpg)
Thank You
QuestionsQuestions