msds [Pd(NH3)4][PdCl4]

3
MATERIAL SAFETY DATA SHEET Manufacturer: Strem Chemicals, Inc 7 Mulliken Way Newburyport, MA 01950-4098 U.S.A. www.strem.com Strem Customer Service CHEMTREC (Emergency Only) Poison Center (978) 499-1600 (800) 424-9300 (800) 562-8236 Section 1: Product Identification Chemical Name: Tetraammine palladium (II) tetrachloropalladate (II), 99% Product Number: 46-2143 CAS Registry Number: 13820-44-5 Formula: [Pd(NH3)4][PdCl4] EINECS Number: 237-500-5 Chemical Family: metal-ammine complexes Synonym: Palladous chloride tetraammine palladite Section 2: Composition and Information on Ingredients Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL) Title Compound 13820-44-5 100% no data no data Section 3: Hazards Identification Emergency Overview: Dust may be irritating to skin, eyes and respiratory tract. May be harmful if swallowed. Primary Routes of Exposure: Ingestion, inhalation Eye Contact: (If dust) May cause mild to moderate irritation of the eyes. Skin Contact: May cause slight to mild irritation of the skin. Inhalation: Dust may be irritating to the nose, mucous membranes and respiratory tract. Ingestion: Ingestion may lead to dizziness, abdominal cramps, and vomiting. Acute Health Affects: May be irritating to skin, eyes, mucous membranes, and respiratory tract. Chronic Health Affects: The chronic toxicological properties of this compound have not been thoroughly investigated. Unrecognized hazards may be present. NTP: No IARC: No OSHA: No SECTION 4: First Aid Measures Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention. Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. Page 1/3

description

hjkbbb

Transcript of msds [Pd(NH3)4][PdCl4]

  • MATERIAL SAFETY DATA SHEET

    Manufacturer: Strem Chemicals, Inc7 Mulliken WayNewburyport, MA 01950-4098 U.S.A.www.strem.com

    Strem Customer ServiceCHEMTREC (Emergency Only)Poison Center

    (978) 499-1600(800) 424-9300(800) 562-8236

    Section 1: Product IdentificationChemical Name: Tetraammine palladium (II) tetrachloropalladate (II), 99%Product Number: 46-2143CAS Registry Number: 13820-44-5Formula: [Pd(NH3)4][PdCl4]EINECS Number: 237-500-5Chemical Family: metal-ammine complexesSynonym: Palladous chloride tetraammine palladite

    Section 2: Composition and Information on IngredientsIngredient CAS Number Percent ACGIH (TWA) OSHA (PEL)Title Compound 13820-44-5 100% no data no data

    Section 3: Hazards IdentificationEmergency Overview: Dust may be irritating to skin, eyes and respiratory tract. May be harmful if swallowed.Primary Routes of Exposure: Ingestion, inhalationEye Contact: (If dust) May cause mild to moderate irritation of the eyes.Skin Contact: May cause slight to mild irritation of the skin.Inhalation: Dust may be irritating to the nose, mucous membranes and respiratory tract.Ingestion: Ingestion may lead to dizziness, abdominal cramps, and vomiting.Acute Health Affects: May be irritating to skin, eyes, mucous membranes, and respiratory tract.

    Chronic Health Affects:The chronic toxicological properties of this compound have not been thoroughly investigated. Unrecognizedhazards may be present.

    NTP: NoIARC: NoOSHA: No

    SECTION 4: First Aid Measures

    Eye Exposure:Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may needassistance in keeping their eye lids open. Get immediate medical attention.

    Skin Exposure:Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance ifirritation persists.

    Inhalation:Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficultyin breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.

    Ingestion:Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Inducevomiting only if directed by medical personnel.

    Page 1/3

  • MATERIAL SAFETY DATA SHEET

    Manufacturer: Strem Chemicals, Inc7 Mulliken WayNewburyport, MA 01950-4098 U.S.A.www.strem.com

    Strem Customer ServiceCHEMTREC (Emergency Only)Poison Center

    (978) 499-1600(800) 424-9300(800) 562-8236

    SECTION 5: Fire Fighting MeasuresFlash Point: not applicableAutoignition Temperature: noneExplosion Limits: noneExtinguishing Medium: carbon dioxide, foam or dry powder

    Special Fire Fighting Procedures:If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressureself- contained breathing apparatus and full protective clothing.

    Hazardous Combustion andDecomposion Products:

    If involved in a fire this material may emit toxic and corrosive fumes.

    Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

    SECTION 6: Accidental Release Measures

    Spill and Leak Procedures:Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent andswept up.

    SECTION 7: Handling and StorageHandling and Storage: Store in a cool, dry place in a tightly sealed container.

    SECTION 8: Exposure Controls and Personal ProtectionEye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.Skin Protection: Wear protective clothing and gloves.Ventilation: To minimize exposure, handle the material in an efficient fume hood.

    Respirator:If ventilation is not available a respirator should be worn. The use of respirators requires a RespiratorProtection Program to be in compliance with 29 CFR 1910.134.

    Ventilation: To minimize exposure, handle the material in an efficient fume hood.Additional Protection: No additional protection required.

    SECTION 9: Physical and Chemical PropertiesColor and Form: red pwdr.Molecular Weight: 422.8Melting Point: no dataBoiling Point: no dataVapor Pressure: not applicableSpecific Gravity: no dataOdor: noneSolubility in Water: slightly soluble

    SECTION 10:Stability and ReactivityStability: air and moisture stableHazardous Polymerization: no hazardous polymerizationConditions to Avoid: noneIncompatibility: active metalsDecomposition Products: ammonium chloride, nitrogen oxides, and palladium salts.

    Page 2/3

  • MATERIAL SAFETY DATA SHEET

    Manufacturer: Strem Chemicals, Inc7 Mulliken WayNewburyport, MA 01950-4098 U.S.A.www.strem.com

    Strem Customer ServiceCHEMTREC (Emergency Only)Poison Center

    (978) 499-1600(800) 424-9300(800) 562-8236

    SECTION 11:Toxicological InformationRTECS Data: No information available in the RTECS files.Carcinogenic Effects: No dataMutagenic Effects: No dataTetratogenic Effects: No data

    SECTION 12:Ecological InformationEcological Information: No information available

    SECTION 13:Disposal ConsiderationsDisposal: Dispose of according to local, state and federal regulations.

    SECTION 14:TransportationShipping Name (CFR): Non-hazardousHazard Class (CFR): NAAdditional Hazard Class (CFR): NAPackaging Group (CFR): NAUN ID Number (CFR): NAShipping Name (IATA): Non-hazardousHazard Class (IATA): NAAdditional Hazard Class (IATA): NAPackaging Group (IATA): NAUN ID Number (IATA): NA

    SECTION 15:Regulatory InformationTSCA: Listed in the TSCA inventory.SARA (Title 313): Not regulated by Title 313.Second Ingredient: NoneThird Ingredient: None

    SECTION 16:Other Information

    Disclaimer:The information herein is believed to be accurate and reliable as of the date compiled. However, StremChemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the informationcontained in this document or any use of the product based on this information.

    Preparation Date: 1/02/2004Revision Date: 10/06/2011

    Strem Chemicals, Inc.7 Mulliken WayNewburyport, MA 01950-4098 USATel: (978) 499 1600Fax: (978) 465 3104Toll free (in USA & Canada)Tel: (800) 647 8736Fax: (800) 517 [email protected]

    Strem Chemicals, Inc.15, rue de l'Atome, Z.I.67800 BISCHHEIM (France)Tel: (33) 03 88 62 52 60Fax: (33) 03 88 62 26 [email protected]

    Strem Chemicals, Inc.Postfach 121577672 KEHL (Germany)Telefon: 0 78 51/ 7 58 [email protected]

    Strem Chemicals UK, Ltd.Newton HallTown StreetNewtonCambridge, England CB22 7ZETel: 0845 643 7263Fax: 0845 643 [email protected]

    Page 3/3