msds-BETAINE
-
Upload
amiller1987 -
Category
Documents
-
view
220 -
download
0
Transcript of msds-BETAINE
-
7/30/2019 msds-BETAINE
1/5
01 0
He a lth
Fire
R e a c t i v i t y
P e rs o n a lP r o t e c t i o n
Material Safety Data SheetBetaine, Anhydrous MSDS
Section 1: Chemical Product and Company Identification
Product Name: Betaine, Anhydrous
Catalog Codes: SLB1717
CAS#: 107-43-7
RTECS: DS5900000
TSCA: TSCA 8(b) inventory: Betaine, Anhydrous
CI#: Not available.
Synonym: Betaine BF 20; Methanaminium, 1-carboxy-
N,N,N-trimethyl-, inner salt; Trimethylammonioacetate;Glycine betaine; 1-Carboxy-N,N,N-trimethylmethanaminium
hydroxide inner salt, Trimethylglycine
Chemical Name: Betaine, Anhydrous, USP
Chemical Formula: C5-H11-N-O2
Contact Information:
Sciencelab.com, Inc.
14025 Smith Rd.Houston, Texas 77396
US Sales: 1-800-901-7247International Sales: 1-281-441-4400
Order Online: ScienceLab.com
CHEMTREC (24HR Emergency Telephone), call:
1-800-424-9300
International CHEMTREC, call: 1-703-527-3887
For non-emergency assistance, call: 1-281-441-4400
Section 2: Composition and Information on Ingredients
Composition:
Name CAS # % by Weight
Betaine, Anhydrous 107-43-7 100
Toxicological Data on Ingredients: Betaine, Anhydrous LD50: Not available. LC50: Not available.
Section 3: Hazards Identification
Potential Acute Health Effects: Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalatio
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not availabDEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition
Section 4: First Aid Measures
Eye Contact:Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Cold water may be used. Get medical attention.
http://www.sciencelab.com/ -
7/30/2019 msds-BETAINE
2/5
Skin Contact:
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminatclothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medicaattention.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
Serious Inhalation: Not available.
Ingestion:Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious
person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar,tie, belt or waistband.
Serious Ingestion: Not available.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: Not available.
Flammable Limits: Not available.
Products of Combustion: These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...).
Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of heat.
Explosion Hazards in Presence of Various Substances:Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available.
Fire Fighting Media and Instructions:SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards: Not available.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill:Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water onthe contaminated surface and dispose of according to local and regional authority requirements.
Large Spill:
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on thecontaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions:
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue undera fume hood. Ground all equipment containing material. Do not breathe dust. Wear suitable protective clothing. In case of
-
7/30/2019 msds-BETAINE
3/5
insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label whe
possible. Avoid contact with skin and eyes. Keep away from incompatibles such as alkalis, moisture.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 23C (73.4F).
Section 8: Exposure Controls/Personal Protection
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommendedexposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminantsbelow the exposure limit.
Personal Protection:Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling thisproduct.
Exposure Limits: Not available.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid. (crystals or granules)
Odor: Characteristic. (Slight.)
Taste: Not available.
Molecular Weight: 117.14 g/mole
Color: White.
pH (1% soln/water): Not available.
Boiling Point: Not available.
Melting Point: 301C (573.8F)
Critical Temperature: Not available.
Specific Gravity: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water.
Section 10: Stability and Reactivity Data
Stability: The product is stable.
-
7/30/2019 msds-BETAINE
4/5
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Reactive with alkalis, moisture.
Corrosivity: Not available.
Special Remarks on Reactivity:
Incompatible Materials: dust generation, moisture, exposure to moist air or water (Hygroscopic!). There is a risk for formationof trimethylamine in hot, strongly alkaline solution.
Special Remarks on Corrosivity: Not available.
Polymerization: Will not occur.
Section 11: Toxicological Information
Routes of Entry: Eye contact. Inhalation. Ingestion.
Toxicity to Animals:LD50: Not available. LC50: Not available.
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: May affect behavior and respiratory system.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:Possibly hazardous short term degradation products are not l ikely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal:
Section 14: Transport Information
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
Section 15: Other Regulatory Information
-
7/30/2019 msds-BETAINE
5/5
Federal and State Regulations: TSCA 8(b) inventory: Betaine, Anhydrous
Other Regulations: EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
Other Classifications:
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC):
R36/38- Irritating to eyes and skin. S24/25- Avoid contact with skin and eyes.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 1
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.
Section 16: Other Information
References: Not available.
Other Special Considerations: Not available.
Created: 10/11/2005 11:24 AM
Last Updated: 06/09/2012 12:00 PM
The information above is believed to be accurate and represents the best information currently available to us. However,
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assumno liability resulting from its use. Users should make their own investigations to determine the suitability of the information their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.cohas been advised of the possibility of such damages.