8/14/2019 Mrv Os Os9000 Me Series Lo

1/4

OptiSwitch 9000 Metro Ethernet Series

OverviewThe OptiSwitch 9000 series is an intelligent, versatile, and powerful carrier-

class/metro Ethernet platform with a comprehensive trafc management suite.

Distributive software and hardware architecture along with the incorporation ofcutting-edge technology enable it to meet current and future needs. Robust and

highly exible, it can readily be applied to provide Ethernet IP multimedia services,

intelligent Layer 2 switching, and advanced QoS to enable metro-optimized ServiceLevel Agreements.

Product highlights:

- Metro Ethernet E-Line, E-LAN & EPL services - MEF 9 and MEF 14 conformance

- Up to 32,000 trafc management proles

- QoS compliance to latest IETF/MEF standards/specications

- IP/MPLS Services

- High availability protocols at Layers 2 and 3 - Modular Master-OS software for current and future services

The OptiSwitch9000 series is designed as a high-end optical aggregation switchingplatform for telecommunications applications and is suited for next generation inter-

converged IP and Ethernet networks.

The product line is targeted for providers Central Ofces, street cabinets, and Multi-Tenant Units (MTUs) and is the ideal solution for deployments especially where

utilization of minimal rack space is critical.

Small form factor ideal for small and medium Point-of-Presence (PoP) installations

Efcient rack space-saving form factor with front facing portsand power supplies

System models :

- 24 GE: 20 GE SFPs + 4 GE Combo (SFP/RJ45) ports

- 24 GE: 24 GE Tri mode (100/1000 FX SFP or RJ45) ports

- 12GE: 12 GE Tri mode (100/1000 FX SFP or RJ45) ports

- 24 FE + 4 GE: 24 Fast Ethernet 100FX SFP + 4GE combo (SFP or RJ45) ports

- 12 GE +1 10GE: 12 GE combo (SFP or RJ45) + 1 10GE (XFP) ports

- 24 GE +2 10GE: 24 GE Tri-mode (100/1000FX SFP or RJ45)

+ 2 10GE (XFP) ports

Hot-swappable SFP optics support SX, LX, ELX, ZX, EZX & xWDM

10GE LAN/WAN PHY - OS9012c-10Gx & OS9024M-210Gx models

MS-9000 multi-service slot for optional Optical Add-Drop andwavelength Multiplexing- Wavelength services (physical separation)

AC/DC redundant (1+1) hot-swappable load sharing power supplies

n+1 redundant fansEnvironmental monitoring with built-in temperature sensing

Applications1st and 2nd mile optical switched or transparent services

- Ethernet in the First Mile 802.3ah aggregation

- Intelligent Service Multiplexing & bandwidth provisioning

Inter-PoP WDM connectivity services

IP DSLAM Gigabit Ethernet Optical Aggregation

Point-to-point and multi-point Layer 2 services for businesssubscribers

- E-Line services

- E-LAN services

- Private Line Services* Represents future software package

Intelligent Layer 2 switching

- Provider bridges concept

- Customer VLAN & Service VLAN (VLAN & CoS preservation)

- Per VLAN non-learning - transparent mode

- Support for jumbo frames up to 9K bytes

- Multicast, Broadcast service control, delivery, and ltering

- Layer 2 control protocols (discard and tunnel) processing

- MEF OAM (Operation, Administration, & Management)

- Fault tolerance and Loop protection

- Multiple Instance Spanning Tree (802.1s)- Link Aggregation (802.3ad)

- 1:1 Link LOS protection for dual-homed & dual rings

- Link Fault Reection

MPLS L2 VPN - LER & LSR / H-VPLS Spoke (PE-r)

IP Service Delivery

- Complete routing set of IGP and EGP protocols

IP Multicast Services

- IGMP snooping

- Multicast router functionality PIM*

Classication and Marking on VLAN priority/IP ToS/MPLS EXP

Class-aware bandwidth proles

- Per Inbound Interface service

- Per VLAN/subscriber service

- Per Class (CoS ID) service

- Layer 3 and/or Layer 4 packet headers

Security ACLs (Access control and Layer 2 ltering)

Enhanced secure management (SSHv2, SCP & SNMPv3)

Statistics per subscriber

- Statistics used by subscriber/VLAN service or

per application class

- Counters per physical port per CoS

- Counters per queue

Security logs/traps

Service Assurance - Round Trip Reporter

Optical level monitoring (Digital Diagnostics) via SFPs

Virtual Cable Diagnostics (VCD - Copper TDR) on RJ45 Ports

Features

Hardware

Ethernet in the First Mile aggregation

IP DSLAM Optical Aggregation

and Inter-PoP Multi- Gigabit WDM Multimedia Aggregation Services

Intelligent Wavelength Muxing

ITU-T grid (G.694.2)

OptiSwitch 9024-M

Switch 9024-4C

OptiSwitch 9024FX

x

OptiSwitch 9012-

OptiSwitch 9024M-210Gx

Not sure what solution best ts your needs? Visit www.mrv.com or e-mail us at sales@mrv.com

Datasheet

8/14/2019 Mrv Os Os9000 Me Series Lo

2/4

System ArchitectureOptiSwitch9000 series is a high-performance system with non-blockinghardware and software architecture engineered for deployment in newdemanding Ethernet network environments to support the providers

value-added services offering. The platform offers a unique combinationof features and optical interfaces that enable easy and exible eldcongurations while making it ideal for maintenance and inventory.

Back-to-back installation in Telco racksThe OptiSwitch9000 series 10-inch depth design enables the installationof two systems, back-to-back in standard 19-inch Telco racks. This featureenables doubling the port-per-rack density.

Front facing system congurationThis feature eliminates the need to dismount the system for maintenanceor installation of new hardware following initial installation.

Fiber guard/protection trayThe front ber tray is indented in relation to the front panel to allowadditional space for connectors and cabling to be convenientlyconnected to the rack. This indentation is ideal for installations of high-

density ber optic cables, where connector space is critical for connectorintegrity.

Optical SFP interfacesSFP interfaces provide unmatched deployment exibility to enableversatile multimode, singlemode, and single ber connections, or evenshared physical ber CWDM or DWDM connections simply by meansof the use of a specic SFP. In addition, the OptiSwitch9000 series offersthe optional MultiService optical WDM module (O9-ADCxx) for Add/Dropand aggregation from its optical interfaces to a single outgoing ber.Such a function offers better ber utilization and physical servicesseparation with dedicated Gigabit rate for premium services forbusinesses that are geographically dispersed.

OptiSwitch9000 MPLSThe OS9000 series enables Layer 2 VPN services based on Ethernet overMPLS protocol. It supports Martini MPLS L2VPN, and Hierarchical VPLS(H-VPLS) PE-r spoke services that scale the VPLS service and simplies

multipoint topology. The MPLS L2VPN offers Virtual Leased Line (VLL)services or so called Pseudo Wire Emulation Edge-to-Edge (PWE3)regardless of traversing protocols. The MPLS functionality is enforcedwith highly exible mechanisms to create trafc engineering (RSVP-TE/CR-LDP) connection-oriented paths and predined rules for protection.

OptiSwitch9000 Quality of ServiceCarriers can offer different types of trafc/services carried into IP/Ethernetnetworks with better control in order to reduce the load from their corenetworks, using the following features:

Layer 2-4 packet classication using QoS access control entries

CoS mapping between layers (802.1p, IP ToS or EXP MPLS) Trafc management using ingress policing and egress trafc shaping

Bandwidth enforcement per ow: single and dual rate tree-color marking

Congestion management Scheduling of ows to interfaces

Congestion avoidance WRED* for predictive early packet discarding

The OptiSwitch 9000 series enables a value-added networkinfrastructure, with end-to-end QoS. The OptiSwitch9000 advanced ASICdesign supports full CoS and QoS including classication, rate limiting,shaping, weighted round-robin scheduling, and strict priority for lowerdelay, low jitter and guaranteed throughput in real-time applications,including voice over IP, video-on-demand, and IP TV services. Fornetwork convergence applications that have a clear boundary betweencustomers and carriers networks, Layer 3 (IP ToS) and Layer 2 CoS(802.1p) can be mapped/marked to preserve priorities or map them intopredened proles set by the carrier.

SecurityThe OptiSwitch 9000 series offers advanced security capabilitiesthat can provide protection against malicious attacks while enablingAuthentication, Authorization and Accounting (AAA). The internalsecurity engine can administer vast Access Lists and advanced featuressuch as port security, and set of Layer 2-4 network trafc securitypolicies.

Layer 2 security Management VLAN

Isolation of Customer VLAN from Provider VLAN

Layer 2 management protocols ltering and tunneling MAC ood protection security

Port-based authorization/control - IEEE802.1x

Layer 2-4 proles Access Lists inspect each incoming packet and permit/

deny according to predened rules Rate limit for protection against Denial-of-Service (DoS)

IP spoong protection in ASIC Filtering of incomingpackets spoofed from an indirect network connection

by an IP source CPU DoS protection and Internal rewall

Access Control List (ACL) mechanismsThe OptiSwitch 9000 ASIC-based technology enables a secureenvironment, preventing Denial of Service (DoS) attacks by using a rangeof layer-independent ACL together with QoS protective techniques such

as rate limit for per-service based streams, source MAC address learninglimit, and comprehensive IP ACL rules. Each Access list has an action rulethat determines whether a packet will be forwarded or dropped in caseof an unsuccessful hit. If a packet satises an ACL rule at any layer, varioushandling actions can be dened.

StatisticsThe OptiSwitch9000 series enables the collection of extensive statisticsand diagnostics to enable exible billing, trafc planning and rapidtroubleshooting. Thanks to this spectrum of statistics, service providerscan better tune their network operation, in general, and bandwidth, inparticular, and charge customers accordingly.The spectrum includes: Statistics proles (packets and bytes counters).

Ingress and egress byte statistics used by subscriber/service (VLAN) or per class

Counters per physical port per CoS Counters per queues

ManagementThe OptiSwitch 9000 system can be managed out-of-band froma craft terminal with a Serial/RS-232 connection and inband froma TELNET/SSH or SNMP station. Using MRVs powerful SNMPmanagement application, MegaVision, all the devices on a networkcan be centrally managed from a single host (e.g., PC) via a LAN orthe World Wide Web. Central management by MegaVision allowsthe network managers to access their management elements viaany browser console through an authentication control interfaceand to have complete control of an entire map of devices forconguration, performance analysis, and inventory control.

Physical Layer OAMVirtual Cable Diagnostics (VCD)Network monitoring is an essential tool to debug network occurrences.OS9000 offers remote layer 1 testing incorporated by Virtual Cable

Diagnostics (VCD), a special tool using the time domain reectometry(TDR) to diagnose cable and link problems on OS9000 copper ports.The copper port operates as an extension to localized servers or anyservice over CAT5/CAT6 in a radius of up to 100 meters. Because theL1/L2 aspects of Ethernet are closely coupled together, it is often notpossible with todays Ethernet equipment to isolate at which layer aproblem has occurred. This results in truck rolls to swap out equipment,cables, or interfaces, in an attempt to x the problem before actuallyknowing what/where it is. This dramatically increases operation costsand decreases the value proposition of Ethernet to service providers.The objective of VCD is to better manage and troubleshoot Ethernetcircuits between the carrier CPE and the customer premises, so calledthe last 100 m 100TX copper line.VCD offers a simple command through which we can remotelyanalyze the copper lines and get a clear status of the following possibleproblems:

1. Report of cable shorts2. Cut on a cable and its location

3. Impedance problems (connectors or bad quality cable)

The information achieved pinpoints exactly what cable undergoes aproblem (i.e. what port it originates from) and at what exact distancefrom the device the short, or the cut is located.

8/14/2019 Mrv Os Os9000 Me Series Lo

3/4

Optical Level Monitoring (Digital Diagnostics)The OptiSwitch9000 series supports the SFP Digital Diagnostics standard(as per SFF-8472) A powerful OPM tool, it provides access to a numberof real-time SFP operating parameters such as optical TX/RX power,

voltage and temperature, as well as component information such asvendor code, serial number and wavelength. The information providedby Digital Diagnostics, together with alarm and warning thresholds,enables a network administrator to identify potential problems in opticaltransmission and take preemptive action before any service outageactually occurs.

Enhanced management features Industry Standard Command Line Interface Out-of-band management EIA-232 console Out-of-band Management Dedicated Ethernet RJ45 port TELNET, SSH v2, SCP, SNMPv1,v2c,v3

RMON (Ethernet statistics,History, Alarms, and Events) Ping, Trace route, DNS lookup, TCP dump (built-in sniffer)

Port mirroring/monitoring of ingress and egress trafc

Management ACL for trusted connections Hierarchical administration policy

RADIUS AAA for management sessions Statistics for accounting information Conguration load/save via FTP Remote rmware download via FTP NTP Network Time Protocol Logging Syslog

Events Scheduler (scheduling of execution of administrator- selectedcommands at times/dates pre- dened by the administrator)

Advanced Ethernet OA&M (discovery, continuity, and connectivity testing)- Link OAM IEEE802.3ah- Virtual Cable Diagnostics (VCD copper TDR) on RJ45 ports

- Optical level monitoring - Digital Diagnostics (SFPs MSA SFF - 8472) - VPN connectivity test - Layer 2 PING & Traceroute

Optical performance monitoring

Networking Standards Compatibility

IEEEIEEE 802.3 EthernetIEEE 802.3 Fast EthernetIEEE 802.3z GigE 1000Base-SX/LXIEEE 802.3ae 10Gigabit EthernetIEEE 802.3x Flow ControlIEEE 802.3ab GigE CopperIEEE 802.3ad Link AggregationIEEE 802.3ah Ethernet in the Frist Mile - Link OAMIEEE 802.1ag* Ethernet CFM - Service OAMIEEE 802.1d Bridging and Spanning TreeIEEE 802.1p Layer 2 priority QoS SupportIEEE 802.1q VLAN TaggingIEEE 802.1w Rapid Spanning TreeIEEE 802.1s MSTPIEEE 802.1x Port Based Network Access ControlIEEE 802.1ad Provider bridges (partial draft)IEEE 802.1ac VLAN tagging

IETFRFC 768 UDPRFC 783 TFTPRFC 791 IPRFC 792 ICMPRFC 793 TCPRFC 826 ARPRFC 854 Multi-session TelnetRFC 894 Transmission of IP Datagrams over Ethernet

NetworksRFC 959 FTPRFC 1058 RIPv1RFC 1112 IGMPv1RFC 1122 Host RequirementsRFC 1142 ISO10589 IS-ISRFC 1155 MIBSs SMIv1RFC 1157 SNMPV1RFC 1195 Use of OSI IS-IS for routing in TCP/IPRFC 1212 Concise MIB DenitionsRFC 1213 MIB IIRFC 1215 Trap ConventionRFC 1284 Etherlike MIBRFC 1321 The MD5 Message-digest AlgorithmRFC 1493 Bridge MIB

RFC 1519 CIDRRFC 1583 OSPF v2-1RFC 1587 OSPF-NSSARFC 1591 DNS clientRFC 1643 Ethernet MIBRFC 1657 BGP MIBRFC 1723 RIPv2RFC 1724 RIPv2 MIB

RFC 1757 RMON 4 groupsRFC 1771 BGP4RFC 1812 Requirements for IP Version 4 RoutersRFC 1850 OSPF MIBRFC 1902 Structure of Management Information for

Version 2 of the SNMPv2RFC 1907 SNMPv2RFC 1966 BGP Route ReectionRFC 1997 BGP Communities AttributeRFC 2011 IP MIBRFC 2012 TCP MIBRFC 2013 UDP MIBRFC 2030 SNTPRFC 2082 RIP v2RFC 2096 IP route table MIBRFC 2131 BootP & DHCP RelayRFC 2236 IGMPv2RFC 2267 Network Ingress Filtering

RFC 2328 OSPFv2RFC 2338 VRRPRFC 2362 PIM-SMRFC 2370 Opaque LSA supportRFC 2385 MD5 peer password authenticationRFC 2430 A Provider architecture for DiffServ & TERFC 2439 BGP Route Flap DampeningRFC 2453 RIP v2 MD5 AuthenticationRFC 2474 DiffServ of DS eld in IPv4 & IPv6 headersRFC 2475 DiffServ ArchitectureRFC 2571-2575 SNMPv3RFC 2597 DiffServ AF PHBRFC 2598 DiffServ EF PHBRFC 2665 Denitions of Managed Objects for the

Ethernet-like Interface TypesRFC 2697 Single Rate Three Color MarkingRFC 2698 Dual Rate Three Color MarkingRFC 2702 Trafc Engineering over MPLSRFC 2787 VRRP MIBRFC 2796 BGP Route ReectionRFC 2819 RMON MIBRFC 2842 BGP capabilities advertismentRFC 2863 The Interfaces Group MIBRFC 2865 RADIUS AuthenticationRFC 2866 RADIUS Accounting

RFC 2918 BGP route refreshRFC 2925 Management SLA MIB - pingRFC 2933 IGMP MIBRFC 2934 PIM MIBRFC 2987 VRRP MIBRFC 3031 MPLS ArchitectureRFC 3032 MPLS Label Stack EncodingRFC 3036 LDP specications

RFC 3037 LDP ApplicabilityRFC 3046* DHCP Relay Agent Information Option 82RFC 3063 MPLS loop prevention mechanismRFC 3065 BGP-AS confederationsRFC 3101 OSPF NSSA OptionRFC 3140 DiffServ PHB identication codesRFC 3164 SyslogRFC 3209 Extentions to RSVP for LSP

tunnels - RSVP-TERFC 3210 Applicability statement for extentions to

RSVP for LSP tunnelsRFC 3212 CR-LDPRFC 3246 AF PHB GroupRFC 3376* IGMP v3RFC 3410 SNMP version 3 FrameworkRFC 3411 An Architecture for Describing SNMP

Management FrameworksRFC 3412 Message Processing and Dispatching for

SNMPRFC 3413 SNMP ApplicationsRFC 3414 User-based Security Model (USM) for

SNMPv3RFC 3415 View-based Access Control Model (VACM)

for SNMPRFC 3416 Version 2 of the Protocol Operations for

SNMPRFC 3418 Management Information Base (MIB) for

SNMPRFC 3630 Trafc Engineering Extentions OSPFv2RFC 3786 VRRP

IETF Draftsdraft-IETF-L2circuit-trans-MPLS-08draft-IETF-L2circuit-encap-MPLS-04draft-IETF-PWE3draft-IETF-ppvpn-vpls-ldp (H-VPLS spoke PE-r)draft-IETF-MPLS-lsp-ping-09Private MIBstcgroup.MIB A private MIB for collecting QoS relatedinformation

ITU

ITU-T Y.1307.1 Ethernet Private Line ServiceITU-T WDM grid optical serviceITU-T grid (G.694.2) wavelengths with 20 nm spacing

for CWDMITU-T grid (G.694.1 ) wavelengths for 100 GHz or 200

GHz spacing for DWDM

8/14/2019 Mrv Os Os9000 Me Series Lo

4/4

Product DescriptionOS9000 Metro SeriesOS9024M-210Gx OptiSwitch 9000 series multi-layer platform with 24 GE multipurpose Tri-mode ports 100FX SFP/1000FX or built-in RJ45 10/100/

1000T + 2 10GX (XFP) uplinks and 2 optional WDM slots (power supplies should be ordered separately - 4 power supplies)OS9012M-10G-APS OptiSwitch 9000 series multi-layer platform with 12 GE multipurpose Tri-mode ports 100FX SFP/1000FX SFP or built-in RJ45 10/

100/1000T and dual 10G-XFP APS- protected (LOS 1:1) uplink (power supplies should be ordered separately)OS9012C-10GX OptiSwitch 9000 series multi-layer platform with 12 dual mode (SFP or RJ45 10/100/1000T) por ts and 10GE XFP Uplink (power

supplies should be ordered separately)OS9024-4C OptiSwitch9000 series multi-layer 24GigE platform with 20 unpopulated 1000BaseX SFPs and 4GigE combo - dual mode (SFP orRJ45 10/100/1000T) ports (power supplies should be ordered separately)

OS9024-M OptiSwitch9000 series multi-layer platform with 24GigE multipurpose tri mode ports - 100FX SFP/ 1000FX SFP or built-in RJ45

10/100/1000T. (power supplies should be ordered separately)OS9012-M OptiSwitch9000 series multi-layer platform with 12GigE multipurpose tri mode ports -100FX SFP/ 1000FX SFP or built-in RJ45 10/

100/1000T. (p ower supplies should be ordered separately)OS9024FX-4GC OptiSwitch 9000 series multi-layer platform with 24 unpopulated 100BaseX SFPs and 4GigE dual-mode (SFP or RJ45 10/100/

1000T) ports (power supplies should be ordered separately )OS9052 OptiSwitch9000 series multi-layer platform with 48 10/100BaseT and 4GigE SFP ports (power supplies should be ordered

separately)Pluggable Power SuppliesEM9005-PS/AC AC power supply for the OptiSwitch9000 series (90-240V AC)EM9005-PS/DC DC power supply for the OptiSwitch9000 series (-48V DC)CWDM Service Modules Note: All OS9000 series models include optional WDM slot and can host WDM line cardsO9ADCxxyyzzww 4 CWDM wavelengths DF OADM module for OS9000

O9ADCxxyyzz 3 CWDM wavelengths DF OADM module for OS9000O9ADCxxyy 2 CWDM wavelengths DF OADM module for OS9000O9ADCxx 1 CWDM wavelengths DF OADM module for OS9000

O9ADCDxxyyzzww 4 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxxyyzz 3 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxxyy 2 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxx 1 CWDM wavelengths DF dual sided OADM module for OS9000O9-Mux/Demux8 8 wavelengths CWDM Multiplexer/Demultiplexer module for OS9000O9ADCDSxxyyzzww 4 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxxyyzz 3 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxxyy 2 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxx 1 CWDM wavelengths SF dual sided OADM module for OS9000AccessoriesMS9000-FG Fiber guard tray for OS9024-4c, OS9024FX-4Gc, OS9012-10Gx modelsEM9005-BR-2-A 23 mounting brackets for the OS9024-M and OS9012-M mo delsEM9005-BR-2-B 23 mounting brackets for the OS9024-4c, OS9024FX-4Gc and OS9012c-10Gx modelsMS9000-Blank Blank panel for multi-service slotEM9005-Blank Blank panel for power supplySoftware Upgrade PackagesSW-UPG-9MPLS Enhanced software upgrade package for OptiSwitch9000 series

(Master-OS: MPLS L2 VPN - L3+LDP, RSVP-TE, CR-LDP, OSPF-TE, CSPF)MegaVision SNMP NMSMV-WEB/PRO MegaVision Pro NMS complete package, includes MegaVision Pro for one server and unlimited number of web clients.

* Represents future software package** xx,yy,zz,ww represents the two middle digits of the wavelength

CWDM Wavelength (optional DWDM)31 = 1310nm 33 = 1330nm 35 = 1350nm 37 = 1370nm 39 = 1390nm 41 = 1410nm 43 = 1430nm 45 = 1450nm47 = 1470nm 49 = 1490nm 51 = 1510nm 53 = 1530nm 55 = 1550nm 57 = 1570nm 59 = 1590nm 61 = 1610nm

For ordering codes of SFP Pluggable optics, please refer to MRVs web site

MRV-OS-9000 Rev.7 10-07

Standard Compliance UL-1950; FCC part 15 Class A;CE-89/336/EEC,73/23/EEC

Designed to meet NEBS/ETSI**Environment Operating Temp. : 0 to 50C / 32 to 122F Storage temp: -25 to 70C / -13 to 158F Cooling: Side-to-side airowHumidity 95% maximum , non-condensing

Diagnostic LEDs Power, Power RST, Temperature, FAN, Management, PS1 & PS2Online / Active / Alarm

Ports: Link, activityMounting Standard 19& 23 Telco Rack MountingPerformance Non-blocking full-wire forwarding on all portsPhysical Dimensions OS9012C- 10GX: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs

OS9012-M: Height: 3 U Size (W x D x H): 444x250x132 mm 17.5x9.84x5.19 Inch Weight: 7 Kg/15.4 lbs

OS9024-4C: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs

OS9024-M: Height: 3 U Size (W x D x H): 444x250x132 mm 17.5x9.84x5.19 Inch Weight: 7 Kg/15.4 lbs

OS9024M-210Gx: Height: 4 U Size (W x D x H): 444x250x176 mm 17.5x9.84x6.94 Inch Weight: 10.8 Kg/23.8 lbs

OS9024FX-4GC: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs

OS9052: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbsPower (AC/DC) Auto range: 90-240 VAC AC Line Frequency 50-60 Hz DC Input Voltage Options -48VDC (-36VDC to 72VDC)

BTU (min/max)

per hour

OS9012C- 10GX: 250 / 375 OS9024-4C: 240 / 410 OS9024-M: 308 / 532 OS9024FX-4GC: 240 / 437

OS9012-M: 225 / 392 OS9024M-210Gx: 448 / 939 OS9052: 240 / 437MTBF OS9012C- 10GX: 193,658 HRS @ 25C /77F OS9024-4C: 248,121 HRS @ 25C /77F OS9024-M: 137,620 HRS @ 25C /77F OS9024FX-4GC: 206,316 HRS @ 25C /77F

OS9012-M: 213,697 HRS @ 25C /77F OS9024M-210Gx: 102,113 HRS @ 25C /77F OS9052: 248,121 HRS @ 25C /77FChassis Power

Consumption

OS9012C- 10GX: 73W min, 110W max OS9024-4C: 70W min, 120W max OS9024-M: 90W min, 156W max OS9024FX-4GC: 70W min, 128W max

OS9012-M: 66W min, 115W max OS9024M-210Gx: 190W min, 274W max OS9052: 70W min, 128W max

Power AC OS9012C- 10GX: 90-240 VAC (0.8A min,1.2A max) OS9024-4C: 90-240 VAC (0.7A min,1.3A max) OS9024-M: 90-240 VAC (1A min,1.7A max) OS9024FX-4GC: -36/-72 VDC (0.7A min,1.4A max)OS9012-M: 90-240 VAC (0.8A min,1.3A max) OS9024M-210Gx: 90-240 VAC (1.1A min,1.9A max) OS9052: 90-240 VAC (0.7A min,1.4A max)Power DC OS9012C- 10GX: -36/-72 VDC (2A min,3A max) OS9024-4C: -36/-72 VDC (2A min, 3.3A max) OS9024-M: -36/-72 VDC (2.5A min, 4.3A max) OS9024FX-4GC: 90-240 VDC (2A min,3.5A max)

OS9012-M: -36/-72 VDC (2.5A min,4.3A max) OS9024M-210Gx: -36/-72 VDC (3.9A min, 5.7A max) OS9052: -36/-72 VDC (2A min,3.5A max)OADM, Mux/Demux

maximum

attenuation

(db)

Type Max. In-Out loss Dual Max. In-Out loss Single Max. In-Drop/Add - Out loss

1 channel OADM

2 channel OADM

3 channel OADM

4 channel OADM

8 channel Mux/DMux

0.9

1.3

1.7

2.1

1.3

2.1

2.9

3.7

1.3

1.3 / 1.7

1.3 / 1.7 / 2.1

1.3 / 1.7 / 2.1 / 2.5

3.3

For technical specications of SFP Pluggable optics, please refer to MRVs web site

OptiSwitch 9000 - Technical Specications

Order

Information

Copyright 2007 MRV Communications, Inc. All Rights Reserved.