Move 2 racksG16-RR2-4G16-RR2-3

G15-PP-01 CKT 7-8-10-12

G15-PP-01 CKT 8-10-12

G15-PP-01 CKT 8 - 10

G15-PP-01 CKT 8

G15-PP-01 CKT 7-8-10-12 Power Feed

Remove these 2 Racks G17-RR1-1 G17-RR1-2To make room for Corrector RacksG16-RR2-4G16-RR2-3

Old 480V connections are capped off inside here

480 supply to the racks came from here, locked off, but still connected to DHP-BE-6

G17-RR1-1 Power viaG15-PP-01 CKT 28

G17-RR1-2 Power viaG15-PP-01 CKT 30

• 24 cables, 3 wires per cable except for quads, 5 wires per cable• Use KN-T8’s for most = 20 cables x 3 wires x .31” per terminal = 18.6”• Use KN-T6’s for quads = 4 cables x 5 wires x .39” per terminal = 7.8”• Sums to 18.6 + 7.8 = 26.4”

• If KN-T6’s for all terminals = 80 wires x .39” per terminal = 31.2”

• Boxes found available so far:• 30 x 18 x 4• 36 x 24 x 8