AXON’ MECHATRONICS S.A.S.DIVISION LOUPOT

103 avenue de Ty BosCS 45035

29556 QUIMPER CEDEX 09 - FRANCETEL.: +33 2 98 65 66 67FAX: +33 2 98 90 19 17

e-mail: contact@axon-mech.com

www.axon-cable.com

STAMPING

MOULDING

OVERMOULDING

ASSEMBLING

MECHATRONICS

MACHINES

© 2

014,

AXO

N’ M

ECHA

TRO

NICS

- RE

LEAS

ED S

EPTE

MBE

R 20

14 -

ALL

RIG

HTS

RESE

RVED

- PH

OTO

S : N

ICKE

LKRO

ME

2V_ANG_PRESSFIT.indd 1 10/06/2015 08:46:57

AXON’ MECHATRONICS,

your technological

partner specializes

in the design of products

and components

using Pressfi t technology.

This innovative technology

is particularly suited

to the design of connectors

and printed circuit boards,

integrating solderless

interconnect terminals.

>> TECHNOLOGYAXON’ MECHATRONICS has chosen to widen its range of products on the basis of E.O.N compliant pins (Eye Of The Needle) because it offers the best compromise between insertion push-in and push-out force: it has been selected by many users concerned about the quality of electrical connections.

>> ADVANTAGES> Avoids additional soldering processes to save cost and increase productivity,> Avoids thermal stress of a second refl ow phase,> Allows the use of standard economic plastic resins in the case of overmoulded or assembled connectors,> Enables excellent mechanical retention and excellent electrical contact after inser-tion,> Suitable for use with 1.6 mm thick prin-ted circuit boards,> AXON’ MECHATRONICS designs and manufactures both components & inser-tion processes in order to provide a turn-key solution onto the printed circuit boards (PCB),> AXON’ MECHATRONICS produces on the same platform stamped pressfi t termi-nals and inserted or overmoulded connec-tors following the requirements of ISO 9000 and ISO/TS 16949 standards,> Compliant with ROHS environmental standards, compatible with different types of PCB plating,> Reduces the deformation and damage of the Plated Through Hole (PTH).

>> APPLICATIONSPressfi t technology can be utilised to a wide range of automotive, electrical and electronic applications including safety criti-cal, control modules, sensors and switches.

>> COMPONENTS & INSERTION PROCESSES

>> R&DAXON’ MECHATRONICS Engineering, Innovation and Development department works closely with the R & D teams of its clients from study phase to qualifi cation of products and processes.Our expertise in stamping, interconnect products, moulding, insert & overmoul-ding and assembly processes allows us to support your project development including rapid prototype manufacturing.

>> DIMENSIONS, RAW MATERIAL & PLATING> Fits to 1.6 mm PCB thickness.> Raw material : Bronze CuSn6P. > Thickness of the pressfi t zone : 0.6 mm, 0.8 & 1mm.> Plating : Pure ROHS Sn.

>> INSERTION MACHINES

In some applications, the insertion of unit pins replaces moulded or overmoulded connectors to reduce cost , weight and volume of the system. In this case, the connector housing is moved into the fi nished product cover.

AXON’ MECHATRONICS offers a wide range of semi-automatic and automatic insertion machines for inserting pressfi t connections into the PCB. These stand-alone or inline machines can be integra-ted into electronic PCB manufacturing processes. To ensure optimum quality, AXON’ MECHATRONICS’s insertion sys-tems integrate options to ensure good pressfi t insertion such as vision and force monitoring sensors.

P R E S S - F I T E . O . N . T E C H N O L O G Y

All in one

2V_ANG_PRESSFIT.indd 2 10/06/2015 08:47:12