Release 02.03.20 Motorola Solutions Page | 1

MOTOTRBO® System Release Notes

Professional Commercial Radios (PCR) & Accessories

Version: R2.3B

Date: October 6th , 2014

MOTOTRBO September 2014 Software Release

Release 2.3B Motorola Solutions Page | 2

Contents Overview ....................................................................................................................................................... 3

Definitions ..................................................................................................................................................... 3

What’s new in the Release ............................................................................................................................ 3

Product Versions ........................................................................................................................................... 4

Known issues in product release .................................................................................................................. 5

Resolved issues in product release ............................................................................................................... 6

Release 2.3B Motorola Solutions Page | 3

Overview This section details the known MOTOTRBO product issues, which remain outstanding at the time of this release of software to the field.

Known product issues are divided into two categories:

• Known issues contained within the current release

• Resolved Issues that have now been fixed within the current release

Definitions A known issue is a problem that is currently unresolved (open).

A closed or resolved issue is one that has been repaired and no longer should occur in the product after upgrading to the new product version.

The risk and workaround aspects are included in the release note description (Known Issues) for overall assessment of the problem.

What’s new in the Release

1. RSSI output DAC rate update: MTR3000 Repeater firmware update to provide RSSI data in Analog mode every 10ms instead of 100 ms.

See also list of Resolved Issues in Product Release on page 6

Release 2.3B Motorola Solutions Page | 4

Product Versions Listed below are all MOTOTRBO Product types with a reference to the released version of software

MOTOTRBO Product Version Supported in Release Subscriber – MOTOTRBO 2.0 Subscriber – MOTOTRBO Subscriber – MOTOTRBO Light

R02.30.21* R01.12.13 R01.00.30

Subscriber – 3600 Baud R01.10.23 XPR 8300, XPR 8400, XPR8380 , MTR3000 Repeaters R02.30.20 CPS R10.8 Radio Management R01.03.01 Air Tracer R8.0 Tuner R10.9 RDAC R5.5 Device Discovery Mobility Service (DDMS) R03.13.5000 MOTOTRBO Network Interface Service (MNIS) R02.32.5000 Multi Channel Device Driver (MCDD) R2.1.3 * SL 7000 series remain at R02.30.13 - released in July 2014.

Release 2.3B Motorola Solutions Page | 5

Known issues in product release

Issue Number CCMPD01909766

Product / Version SL series

User Impact Description Radio does not route audio to accessory when radio powers up with accessory USB cable attached

Frequency of Occurrence 100%

Trigger 1. Attach accessory and PC USB cable to radio. Power off radio and enter radio charging mode. 2. Power up radio with accessory still attached.

Special Configurations NA

Recovery Method NA

Recovery Time NA

Workarounds Remove and re-attach the accessory after radio power up in normal mode.

Issue Number CCMPD01788916

Product / Version MOTOTRBO2.0 radios

User Impact Description When admit criteria set to ‘Correct PL’, user may get ‘Channel Busy’ upon Selective Call transmission if there is an ongoing transmission over the air with matching PL.

Frequency of Occurrence 100%

Trigger MDC and QCII Selective Call transmission.

Special Configurations Admit Criteria: Correct PL

Recovery Method NA

Recovery Time NA

Workarounds Set the admit Criteria to ‘Always’.

Release 2.3B Motorola Solutions Page | 6

Resolved issues in product release SR# Version Found Description

CCMPD01897820 R03.11.5000 Race condition inside DDMS causes the app to send out notification messages without message length field, to 3rd party applications. The 3rd party applications can’t decode the message correctly.

TFSPD00026395 R02.30.10

When attempting to write the archive from a radio with R02.06.04 firmware to a radio with R02.30.10 firmware, CPS shows Error #1214 meaning “Digital Telephone Patch Feature not supported” due to mismatch in the default phone list with the new phone list.

TFSPD00024411 R02.30.10 R01.00.10

Multi-Selection for Private Call/Group Call in devices which do not support Route Type in Digital Call (CP200d, CM200d, CM300d, XPR2500, XPR3300, XPR3500) does not work. User is only able to edit Call ID, but other fields such as Ring Style are grayed out.

CCMPD01886003 R02.30.10 Emergency alarm will fail if "Emergency Retry" field is set to "0" on Capacity Plus systems

CCMPD01873248 MOTOTRBO 2.0 Add support for “Fist Mic Disable” feature on MOTOTRBO 2.0 radio to disable the Front microphone on mobile radio when ignition sense is set to “PTT disabled”.

CCMPD01884636 R02.30.01 After disabling the AGC via CPS or menu, the Mic gain changes to default value instead of the value prior to enabling AGC.

CCMPD01889541 R02.30.01 XPR 5350 does not update the channel number for 7-segment mobile radio when Option Board sends command to change the channel

CCMPD01896306 XPR 5550 XCMP clone read command pop up “security locked” error on XPR 5550 mobile radios

CCMPD01910129 R02.30.02 XPR and MTR repeaters experienced random blocking transmission in Dynamic Mixed Mode. In this state, the timeout timer doesn’t work (receiver seems to work but the calls are not repeated) and the subscribers receive a strange modulation.

CCMPD01905450 R02.30.02 In Connect Plus mode, the MTR3000 repeater gets stuck in locked state on detection of interference and stays in this state until it receives a new channel assignment.

CCMPD01884526 R01.00.00 CM200d, CM300d, XPR2500, the RSSI output (rear connector pin #15) is always at a constant voltage of 2V or 3V regardless of signal strength received by the radio. The correct output value should be a voltage from 1.2V at -115dBm to 2.4V at -45dBm.

CCMPD01863357 R01.07.00 MTR3000 Network connection performance may be slow after updating the firmware using Remote Repeater Programming via CPS Version 10.0 (Build 510) or earlier, due to a MAC Address issue. Updating the repeater firmware or performing a device update with CPS R10.7 Build 580 will insure optimum performance.

CCMPD01883117 R01.12.02 XPR4350 radios, TX Radio keeps retrying the message even though RX Radio has received the data. This only happen on Confirmed data.

CCMPD01887629 R01.11.21 or

R01.10.22 Incorrect battery capacity reading or low battery tone when placing an IMPRES Battery on a radio within 24 hours of completing a charge cycle. Each time the IMPRES Battery goes through a charging cycle, above symptoms may occur.

CCMPD01840869 R01.10.22 Powering up a radio that is connected to a standard programming cable (with no audio pins) with “self test pass tone” is disabled - audio will never be routed to internal speaker. Issue remains even after the programming cable is disconnected after the powering up. Issue not observed if the cable is connected after the radio is powered up.

CCMPD01894404 R01.10.22 3600 Baud firmware radio does not display battery icon if radio is in transmit state during power up.

CCMPD01861564 R01.10.22 Radio directly shuts down during key up, without giving low battery alert earlier.

CCMPD01931969 CPS 10.7 Errors 1100 when Cloning a radio with an older archive codeplug file with CPS 10.7

CCMPD01931970 CPS 10.7 Error 1100 cannot add or delete Contacts, Personality or Zone on 3600 baud radios with CPS 10.7

CCMPD01930369 CPS 10.7 Error 1060 when opening R1.2 - R1.5 MOTOTRBO archives with CPS 10.7

CPS 10.7 Error 34248 connection with Licensing Server fails during registration of multiple licenses with CPS 10.7