MOTORCYCLE & MIRROR MOUNT Help Desk Guide models: KTM 690 / HONDA XR / HUSQVARNA ... Tricycle/Quad/3...
Transcript of MOTORCYCLE & MIRROR MOUNT Help Desk Guide models: KTM 690 / HONDA XR / HUSQVARNA ... Tricycle/Quad/3...
Xxxx Xxxxxx
MOTORCYCLE & MIRROR MOUNT Help Desk Guide
RIDE DRIVE LIFERUN
Anatomy of motorcycle dashboard
Hi/low beamheadlight switch
Turn signalswitch
Clutchlever Horn button
Triple clamp
Speedometer
Tachometer
Handlebar riser
Kill switch
Hazard light switch
Throttle
Front brake leverStarter switch
The image on the left shows the approximate location and name of the various parts of a motorcycle dashboard.
Every motorcycle (or scooter) will have a different layout but this is a rough guide to where things will likely be.
Anatomy of the Motorcycle Mount
Countersunk screw
Top cap
Locking lever
Locking lever spring
Mount index base
Cap head screw
Motorcycle mount index base - male
Motorcycle mount clamp Spacer - 28mm
Spacer - 25mm
Spacer - 22mm
Motorcycle mount arm
Anatomy of the Mirror Mount
Countersunk screw
Mount cap
Locking lever
Locking lever spring
Mount index base - female
Cap head screw
Mirror Mount index base - screw
Mirror Mount clamp Spacer - 14mm
Spacer - 12mm
Spacer - 10mm
Identifying the type of bike
Sport BikesPopular models: Kawasaki Ninja / Suzuki Hayabusa / Ducati / Yamaha YZF
Sport bikes have a very busy and condensed handle bar setup.
The moto-mount is recommend but is unlikely to fit most Sport Bike setups.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
25mm
60mm
Naked BikesPopular models: Triumph / Yamaha MT / Suzuki SV / KTM Duke
(also known as Standards or Roasters)
Naked bikes have a very varied handlebar setup across different models and brands
The moto-mount or mirror mount is recommended depending on space constraints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment Requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Naked bikes have a very varied handlebar setup across different models and brands
The moto-mount or mirror mount is recommended depending on space constraints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment Requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Touring Bikes
Popular models: BMW K 1600 / Honda Gold Wing / Indian Roadmaster
Touring bikes have a very varied handlebar setup across different models and brands
The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space con-straints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Touring bikes have a very varied handlebar setup across different models and brands
The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space con-straints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Cruiser/ChopperPopular models: Harley Davidson / Triumph Rocket / Kawasaki VN2000
Most Cruiser and Chopper bikes have lot’s of space on the handle bars and usually have round bar mirrors
The moto-mount or mirror mount is recommended depending on space constraints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Off Road/Trail/Dual Sport/EnduroPopular models: KTM 690 / HONDA XR / HUSQVARNA
Most Off road/Trail/Dual Sport/Enduro bikes have cross bars and usually have round bar mirrors
The moto-mount or mirror mount is recommended depending on space constraints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
ScootersPopular models: Vespa / Piaggio / Yamaha Mio
(Also known as Mopeds and Underbones)
Scooter usually have solid and no bar to secure a mount to.
The Mirror Mount is recommended for scooter mirrors provided the mirror bars are round.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Tricycles/QuadsPopular models: Kawasaki / Harley / Yamaha
(Also known as Trikes, 3 Wheelers/4-Wheelers)
Tricycle and Quad Bikes can come in various styles such as cruis-er/offroad/scooter/chopper/sport therefore having varying bar and mirror set ups.
The moto-mount or mirror mount is recommended depending on space constraints and personal preference.
Motorcycle Mount fitment requirements:25mm length bar space is recommend
60mm clearance required for to screw clamp together.
Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)
Check size of phone indented for mounting does not obstruct use of motorcycle or block vision
Naked/Standard/Roadster
Off Road/Trail/Dual Sport/Enduro
Cruiser/Chopper
Scooter/Moped/Underbones
Touring Bikes
Tricycle/Quad/3 Wheeler/4 Wheeler
Sports Bikes
There are a huge range of motorcycles and scooters but they can generally be gathered into one of the categories shown on this page.
Our recommended mount for each of these categories can be found on the following pages. However, because of the variety of bikes our suggestion might not be compatible with all bikes. For example, not all Tricycle/Quads have rear view mirrors.
Naked/Standard/Roadster
Naked/Standard/Roadster bikes have a very varied handlebar setup across different models and brands.
This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
60m
m
25m
m
Mirror Mount Motorcycle Mount(shown with and without
mounting arm)
Off Road/Trail/Dual Sport/Enduro
Most of this kind of bike have cross bars and usually have round mirror stems.
This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
Mirror Mount
60m
m
25m
m
Motorcycle Mount(shown with and without
mounting arm)
Cruiser/Chopper
Most Cruisers and Chopper bikes have lots of space on the handle bar and usually have round mirror stems.
This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
60mm
25m
m
Mirror Mount Motorcycle Mount(shown with and without
mounting arm)
Scooter/Moped/Underbones
Scooters usually have a solid dashboard and no handlebar to secure a mount to.
The Mirror Mount is recommended for this type of bike, as long as the mirror stems are round.
Whilst the mount might attach to other shapes of mirror stem we can’t guarantee a secure fit on anything other than a round stem.
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
Mirror Mount
Tricycle/Quad/3 Wheeler/4 Wheeler
Trikes and Quad bikes can come in various styles such as Cruiser/Off Road/Scooter/Chopper/Sport and therefore have a varying bar and mirror set ups.
This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
60m
m
25m
m
Mirror Mount Motorcycle Mount(shown with and without
mounting arm)
Touring Bikes
Touring bikes have a very varied handlebar set up across different models and brands.
Motorcycle Mount or Mirror Mount is recommended depending on space constraints and personal preference.
The Mirror Mount can even fit on some cross bars, if present.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
60m
m
25m
m
Mirror Mount Motorcycle Mount(shown with and without
mounting arm)
Sport Bike
Sports bikes generally have very busy and condensed handlebar set up.
We recommend the Motorcycle Mount but it is unlikely to fit most Sports bikes.
Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)
ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.
60mm
25mm
Motorcycle Mount(shown with and without
mounting arm)