motor mounts, tri-arm/quad-arm brackets and cushion bearings ...
Transcript of motor mounts, tri-arm/quad-arm brackets and cushion bearings ...
P (920) 235-3710 F (920) 235-4523
MOTOR MOUNTS, TRI-ARM/QUAD-ARM BRACKETS AND CUSHION BEARINGS
MOTOR MOUNTS
Manufactured to dampen vibrations, each leg of the motor mount can include rubber footings and can be configured in length and gauge to accommodate nearly any fan blade diameter.
Motor mounts are available with:• Rubber footings • Customizable footing length and gauges • Special order steel ferrules
Expertly designed and manufactured, featuring:• More than 40 sizes of belly bands available to fit different motor mount legs Belly bands are shipped unassembled to minimize costs • Unique, easy to use and affordable motor mount system • Assemble fixture available
Designed for the HVAC industry, Triangle Manufacturing’s motor mounts, cushion mounted bearings and tri-/quad-arm brackets are highly regarded within the industry for their noise dampening effect and ease of installation.
TRI-ARM AND QUAD-ARM BRACKETS
Available in three- or four-arm styles, our brackets are designed for the HVAC industry to facilitate accurate positioning of the shaft and blower wheel through its self-centering and self-aligning design.
Arm brackets are available with:• Three- or four-arm configurations• Customizable lengths and gauges for maximum flexibility • Five different bearing socket sizes
Expertly designed and manufactured, featuring:• Preassembled or unassembled shipping
to meet customer requirements• Welded or crimped assembly available
150 Libbey AveOshkosh WI 54901P (920) 235-3710 F (920) 235-4523 [email protected]
CUSHION BEARINGS
Triangle Manufacturing's cushion pillow block mounted bearings are attached on a plane parallel to the rotating shaft’s axis and are used to provide load support for that axis. Cushion flange mounted bearings are designed for side mountings on panels, plates and housing, or anywhere that may require sound and vibration suppression. The cushion used in both products is made of soft, yet durable, 50 durometer, synthetic rubber and is resistant to oils, grease, oxidation or aging. It dissipates static electricity and effectively suppresses sound and vibration.
Standard-duty cushioned pillow block bearings are available with:• Oil cups or grease fittings• 16-gauge mountingsMedium duty flange mounted bearings are available with:• Oil cups or grease fittings • 13-gauge steel mountings • Special bearings are also available, such as the NA7803 and NA7804 with special mounting holes
CUSHION BEARING SPECIFICATIONS
PILLOW BLOCK BEARING
SHAFT SIZE PART NUMBER1/2" NAH8A5/8 NAH10A3/4 NAH12A7/8 NAH14A1 NAH16A3/4 NBE12A13/16 NBE13A7/8 NBE14A15/16 NBE15A1 NBE16A1-1/8 NBE18A1-3/16 NBE19A1-1/4 NBE20A
FLANGE MOUNTED BEARING
SHAFT SIZE BOLT HOLES PART NUMBER 1/2" 2 NVH8A 5/8 2 NVH10A 3/4 2 NVH12A 7/8 2 NVH14A 1 2 NVH16A 1-1/4 4 3668
Expertly designed and manufactured, featuring:• Self-aligning ball and socket design
that compensates for surface mounting irregularities
• Self-metering lubrication system, including a factory-filled, large lubricant reservoir and capillary feeder system for mountings ordered with oil cups (grease fittings shipped dry)
• Precision bores supplied to customer specification, accurately sized and straightened to eliminate variations occurring in press-fitted parts
Metric sizes are also available. Dimensions shown are in the U.S. Customary System. C1301