Motor Control and Power Distribution - ATI Systems · Motor Control and Power Distribution ATI...

Motor Controland Power Distribution

ATI Systems

[email protected]

www.atisystems.co.za

011�383�8300International:�+27�11�383�8300

159�Galjoen�Street,�Wadeville

Trade Enquiries Welcome

Part No. Description TypeESGT0202015ESGT0203015BESGT0253015BESGT0303015BESGT0303020BESGT0304015BESGT0304020BESGT0404020BESGT0405020BESGT0405025BESGT0406020BESGT0505020BESGT0507025BESGT0606030BESGT0608030BESGT0808030BESGT0810025BESGT0810030B

MS BOX 200x200x150 IP65MS BOX 200x300x150 IP65MS BOX 250x300x150 IP65MS BOX 300x300x150 IP65MS BOX 300x300x200 IP65MS BOX 300x400x150 IP65MS BOX 300x400x200 IP65MS BOX 400x400x200 IP65MS BOX 400x500x200 IP65MS BOX 400x500x250 IP65MS BOX 400x600x200 IP65MS BOX 500x500x200 IP65MS BOX 500x700x250 IP65MS BOX 600x600x300 IP65MS BOX 600x800x300 IP65MS BOX 800x800x300 IP65MS BOX 800x1000x250 IP65MS BOX 800x1000x300 IP65

BOX 2.2-150 (V2) /7035 FINE TXBOX 2.3-150 (V2) /7035 FINE TXBOX 2,5.3-150(V2)/7035 FINE TXBOX 3.3-150 (V2) /7035 FINE TXBOX 3.3-200 (V2) /7035 FINE TXBOX 3.4-150 (V2) /7035 FINE TXBOX 3.4-200 (V2) /7035 FINE TXBOX 4.4-200 (V2) /7035 FINE TXBOX 4.5-200 (V2) /7035 FINE TXBOX 4.5-250 (V2) /7035 FINE TXBOX 4.6-200 (V2) /7035 FINE TXBOX 5.5-200 (V2) /7035 FINE TXBOX 5.7-250 (V2) /7035 FINE TXBOX 6.6-300 (V2) /7035 FINE TXBOX 6.8-300 (V2) /7035 FINE TXBOX 8.8-300 (V2) /7035 FINE TXBOX 8.10-250 (V2)/7035 FINE TXBOX 8.10-300 (V2)/7035 FINE TX

Door opens to left or right IP65 enclosure Supplied with aluzinc mounting plate and wall mounting brackets Colour : Grey (RAL 7035 Texture)

Mild Steel grey wall-mounting enclosure

Door opens to left or right IP65 enclosure Supplied with aluzinc mounting plate and wall mounting brackets Colour : Orange (RAL 2000 Texture)

Mild Steel orange wall-mounting enclosure

Part No. Description TypeESOT0202015BESOT0203015BESOT0253015BESOT0303015BESOT0303020BESOT0304015BESOT0304020BESOT0404020BESOT0405020BESOT0405025BESOT0406020BESOT0505020BESOT0507020BESOT0507025BESOT0606020BESOT0606030BESOT0608020BESOT0608025BESOT0608030BESOT0808030BESOT0810025BESOT0810030BESOT08120030B

MS BOX 200x200x150 IP65MS BOX 200x300x150 IP65MS BOX 250x300x150 IP65MS BOX 300x300x150 IP65MS BOX 300x300x200 IP65MS BOX 300x400x150 IP65MS BOX 300x400x200 IP65MS BOX 400x400x200 IP65MS BOX 400x500x200 IP65MS BOX 400x500x250 IP65MS BOX 400x600x200 IP65MS BOX 500x500x200 IP65MS BOX 500x700x200 IP65MS BOX 500x700x250 IP65MS BOX 600x600x200 IP65MS BOX 600x600x300 IP65MS BOX 600x800x200 IP65MS BOX 600x800x250 IP65MS BOX 600x800x300 IP65MS BOX 800x800x300 IP65MS BOX 800x1000x250 IP65MS BOX 800x1000x300 IP65MS BOX 800x1200x300 IP65

BOX 2.2-150 (V2) /2000 FINE TXBOX 2.3-150 (V2) /2000 FINE TXBOX 2,5.3-150(V2)/2000 FINE TXBOX 3.3-150 (V2) /2000 FINE TXBOX 3.3-200 (V2) /2000 FINE TXBOX 3.4-150 (V2) /2000 FINE TXBOX 3.4-200 (V2) / 2000 FINE TXBOX 4.4-200 (V2) /2000 FINE TXBOX 4.5-200 (V2) /2000 FINE TXBOX 4.5-250 (V2) /2000 FINE TXBOX 4.6-200 (V2) /2000 FINE TXBOX 5.5-200 (V2) /2000 FINE TXBOX 5.7-200 (V2) /2000 FINE TXBOX 5.7-250 (V2) /2000 FINE TXBOX 6.6-200 (V2) /2000 FINE TXBOX 6.6-300 (V2) /2000 FINE TXBOX 6.8-200 (V2) /2000 FINE TXBOX 6.8-250 (V2) /2000 FINE TXBOX 6.8-300 (V2) /2000 FINE TXBOX 8.8-300 (V2) /2000 FINE TXBOX 8.10-250 (V2)/2000 FINE TXBOX 8.10-300 (V2)/2000 FINE TXBOX 8.12-300 (V2)/2000 FINE TX

ESGT

ESOT

ELSTEEL Enclosure - Mild Steel

All bold items in stock.

Part No. Description TypeBCOV PAD LOCKABLE BOX LOCK COVER BCOV

Accessories

Part No. Description TypeID 3.3ID 3.4ID 4.5ID 4.6ID 5.7ID 6.6ID 6.8

INTERNAL DOOR 300 × 300INTERNAL DOOR 300 × 400INTERNAL DOOR 400 × 500INTERNAL DOOR 400 x 600INTERNAL DOOR 500 × 700INTERNAL DOOR 600 × 600INTERNAL DOOR 600 × 800

ID 3.3ID 3.4ID 4.5ID 4.6ID 5.7ID 6.6ID 6.8

Mild Steel Inner door white RAL 9010

Supplied with mounting material Colour: white

BCOV

ID

ELSTEEL Accessories


ELSTEEL Terminal Boxes - Mild Steel

Part No. DescriptionEST015015080EST03015080EST0202080EST0302080EST150150120EST175175120EST030150120EST02020120EST03020120EST04020120EST03030120

TERMINAL BOX - MS - V2 150 X 150 X 80 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 300 X 150 X 80 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 200 X 200 X 80 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 300 X 200 X 80 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 150 X 150 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 175 X 175 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 300 X 150 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 200 X 200 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 300 X 200 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 400 X 200 X 120 mm RAL 7035 Fine TexturedTERMINAL BOX - MS - V2 300 X 300 X 120 mm RAL 7035 Fine Textured

Mild Steel Terminal Boxes

ELSTEEL Terminal Boxes - Stainless Steel

Part No. Description

ESTS15015080ESTS03015080ESTS0202080ESTS0302080EST150150120ESTS17517512ESTSS03015012EST0202012ESTS0302012ESTS0402012ESTS0303012

ESTS15015080ESTS03015080ESTS0202080ESTS0302080ESTS15015012ESTS17517512ESTS03015012ESTS0202012ESTS0302012ESTS0402012ESTS0303012

STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 150 X 150 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 300 X 150 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 200 X 200 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 300 X 200 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 150 X 150 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 175 X 175 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 300 X 150 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 200 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 300 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 400 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 304 300 X 300 X 120 mm

STAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 150 X 150 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 300 X 150 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 200 X 200 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 300 X 200 X 80 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 150 X 150 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 175 X 175 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 300 X 150 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 200 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 300 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 400 X 200 X 120 mmSTAINLESS STEEL TERMINAL BOX IP 66 V2 - SS 316 300 X 300 X 120 mm

Stainless Steel Terminal Boxes

Stainless Steel 316

Stainless Steel 304



ELSTEEL Techno Module

THE BEST TECHNICAL SOLUTION

Patented 200mm grid modular system.

Extensively tested and verified toIEC 61439-1/2.

All major brands of breakers, just fits perfectly into the system.

It is the result of many years of research and development, and continuous testing at recognised test stations around the world.

SCHNEIDER ELECTRICABBSIEMENSGELSMERLIN GERINMOELLERTERASAKIand more...

Brands Tested

Verified throughFull Type Tests

25mm 200mm

200mm

200mm

The Most Modular Assembly Available


The Techno Module system is modularin steps of 200 mm in all three directions.

That means that there are no limit to the possibilities and positions.

The strong framework is made from profiled 2mm electro-galvanised and powder coated steel.

It forms a 25mm grid and can be arranged in an unlimited number of ways.

It rests on a modular base frame which incorporates all facilities for dividing and transportation.

h

w

d

All Joints Bolted& Torqued

Suitable forMoving Machines

The Toughest Framework on the Market


The system uses standard 10mm thick flat busbar.

Tested up to 7100Amp at 100kA/1sec. & 50kA/3sec.

IEC61439-1/2

Holders are made from specially formulated plastics, and mounted in any position inside the framework.

No SpecialCopper Extrusions


Busbars


The highest form of personal safety.

With these separation plates installed it is possible to work in one section of the panel board while the rest of the panel is live.

Special separation plates effectively prevent contamination of the whole panel board in case of an internal arc fault.

Form 3b + 4b



Arc filters have been included in the design of the separation plate - just add the standard chimneys and your enclosure is arc safe.

No flames or solid objects will explode towards the operator or to adjacent sections.

Ultimate in Safety


Internal ARC Protected

Tests Performed Certi�cation Authority

Certi�cateReference

Tests Performed Certi�cation Authority

Certi�cateReference


01. 400A full type test with LS Breakers (Instant Panel Light) ASTA 17013

17545

17012

16899

17544

17011

16149

16783

17742

17543

17010

16150

513.228.6.384

170.265.2.230

17615

S2060729

12798

17756

17542

1819.1206.5.668

1513.832.0.468

12890

17541

1819.1061.3.431

1819.1061.3.434

102602

101740-1

1752

14902

15216

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

ASTA

CPRI

IPH

IPH

IPH

IPH

IPH

IPH

TCA

NATA

NEFI

02. 800A full type test with ABB breakers

03. 800A full type test with LS breakers (TM Light Panel)

04. 800A full type test with MG breakers (TM Light Panel)


06. 1600A full type test with LS breakers

07. 1600A full type test with GE breakers

08. 2000A full type test with Siemens breakers



11. 2500A full type test with LS breakers

12. 2500A full type test with GE breakers

14. 2500A temperature rise test & short circuit test

15. 3200A full type test with MG breakers

16. 3200A full type test (AI busbar) withh ABB breakers


18. 4000A full type test with Schneider breakers


20. 4000A full type test with Terasaki breakers

21. 5000A full type test with ABB & Jean Muller breakers





27. Short circuit test 50kA/1sec for 2x10x40 Cu




13. 2500A full type test with MG, ABB, Siemens, Jean Muller breakers

26. Short circuit test 50kA/1sec for 1x10x40 Cu & 1x10x30 Cu & Power Cassette unit

Techno Module Panels Comply to IEC 60439-1 / IEC 61439-1 & 2

01. Internal Arc fault test according to IEC 61641 & AS/NZS 3439.1 : 2002 TCA 102601102380/ 102378

302649-01

302649-02

E207550:Vol-202/70003 (E1)

08-SG366750-PDA

10.00001.270

22875/A0 BV

E-10273

VIPAC

VIPAC

UL

LLOYD’S REGISTER

ABS

RS

BV

DNV

02. Vibrations test according to IEC 68-2-6 & IEC 68-2-36

03. Seismic test according IEC 68-3-304. UL/ cUL Mark for TM Panels and components

05. Loyd's Register type approval certi�cate for marine, offshore and industrial applications

06. ABS type approval certi�cate for shipboard and associated marine & offshore installation

07. Russian Maritime Register of Shipping (RS) Type approval certi�cate for Marine use

08. Bureau Veritas (BV) Type Approval Certi�cate for Marine use

09. Det Norske Veritas (DNV) Type Approval Certi�cate for offshore use

Techno Module Panels Comply to other standards

Tests


Certi�cation


Part No. Description Rows No of waysDB4.4 Elsteel MS Box

Elsteel MS BoxElsteel MS BoxElsteel MS Box

400x400x200400x600x200600x600x200600x800x200

2x18 36DB4.6 3x18 54DB6.6 3x29 87DB6.8 5x29 145

Elsteel Standard Box DB

Elsteel Distribution board DB2

1200 1200

800 800

300 500 300 500

400 400

1200 1200

800

400 400

800

800

1200

400 400 400 400 400 400

1200

800

400 600

800

1000

400 600

1000

800

400 400

800

800

800

800

400 400

300 500

800

800

800

800

300 500

Size (H x W x D) No of Ways

800x800x300 69


800x800x300 54


800x1000x300 87


800x1200x300 108


1200x800x300 90


1200x800x300 115

ELSTEEL Standard DB


ELSTEEL Distribution Board DB2

1200

1200 1200

400 400 400 400 400 400

1200

400 600

1000

1200

400 600

1200

1000


1200x1000x300 145


1200x1200x300 180

300 500

1600

800

1600

300 500

800

400 400

1600

800

1600

800

400 400


1600x800x300 161


1600x800x300 126

400 600

1600

1000

1600

1000

400 600

400

1600

1200

1600

400400 400

1200

400400


1600x1000x300 203


1600x1200x300 252


300 500

2000

800

2000

300 500

800


2000x800x300 207


2000x800x300 162

400

400 400

800

1200 1200

2000

2000 2000

2000

800

400

400 400400 400

400 400

400 600

2000

1000

2000

400 600

1000


2000x1000x300 261


2000x1200x300 324

ELSTEEL Distribution Board DB2

Part No. Description (WxHxD) Rows No of waysDB 0806025DB 0808025DB 08010025DB 08012025

DB 0906025DB 0908025DB0910025DB 0912025

EXP A06EXP A08EXP A10EXP A12

EXP BEXP C8EXP C9

CAN 04CAN 09

SP MS BOX 800x600x250 (W 300+500)SP MS BOX 800x800x250 (W 300+500)SP MS BOX 800x1000x250 (W 300+500)SP MS BOX 800x1200x250 (W 300+500)

MS DB BOX 900x600x250 (W 400+500)MS DB BOX 900x800x250 (W 400+500)MS DB BOX 900x1000x250 (W 400+500)MS DB BOX 900x1200x250 (W 400+500)

Expansion box (H 600)Expansion box (H 800)Expansion box (H 1000)Expansion box (H 1200)

Cable entry box (W 400)Cable entry box (W 800)Cable entry box (W 900)

Canopy (W 400)Canopy (W 900)

3x235x236x237x23

3x235x236x237x23

3x185x186x187x18

N/AN/AN/A

N/AN/A

69115138161

69115138161

5490108126

N/AN/AN/A

N/AN/A

Padlockable

Mild Steel RAL2000

Basic DB expandable in all directions as per �g.1 below

A A

A

B BC

B B

B

C

C

400mm300mm/

800mm/900mm

400mm 400mm500mm

300m

m30

0mm

600

/ 800

/ 10

00 /

1200

mm

Expandable to left

Expandable to right

Top entry cable box

Optional Rain Canopy

OptionalExpansion

OptionalExpansion

OptionalCable Box

OptionalCable Box

OptionalCable Box

Fig.1Bottom

entry cable box

ELSTEEL Welded Orange DB


DB

DB

Part No. Description Rated Current (A)

Cut off OrderCurrent (KA) Number

Length (L)

FB 160-250FB 160-325FB 160-400FB 160-475FB 250-250-8FB 250-325-8FB 250-400-8FB 250-475FB 400-325FB 400-400FB 400-475FB 400-550FB 400-700FB 630-250FB 630-325FB 630-400FB 630-475FB 630-550FB 630-775FB 630-850FB 630-925

BRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXIBRAIDED FLEXI

125125125125250250250250400400400400400630630630630630630630630

636363636565656565656565656565656565656565

209432094420945209462096420967209702097120979209822098321055210572098920992209952099721070210732107421075

2503254004757515022530075150225300375250325400475550775850925

ELSTEEL Stainless Steel DB’s

ELSTEEL Braided Flex


Part No. Description (WxHxD) Rows No of waysDBS 0906025 - 304DBS 0908025 - 304DBS 0910025 - 304DBS 0912025 - 304

ATI DB Box - SS 304 900x600x250ATI DB Box - SS 304 900x800x250ATI DB Box - SS 304 900x1000x250ATI DB Box - SS 304 900x1200x250

3x235x236x237x23

69115138161

Padlockable

Stainless Steel 304

Basic DB expandable in all directions as per �g.1 on the previous page


Motor Control and Power Distribution - ATI Systems · Motor Control and Power Distribution ATI...

Documents

Transcript of Motor Control and Power Distribution - ATI Systems · Motor Control and Power Distribution ATI...