Mørenot - Offshore Catalogue 2008

Seismic catalogue PAGE 1/78

MøreNot A/S, 6280 Søvik, Norway Tel:(+47)70209500 / fax: (+47)70209510 web: www.morenot.no



1. ROPES, COVERBRAIDING & FAIRINGS 5

1.1 DYNEEMA, PLEXUS 12S - BREAKING LOADS & WEIGHTS: 5 1.2 COVERBRAIDING OF ROPES & CABLES 6 1.3 FAIRING: DYNEEMA ® COVER & DYNEEMA ® FAIRING 7 1.4 FAIRING: POLYESTER COVER & DYNEEMA ® FAIRING 7 1.5 COVER: POLYESTER COVER & DYNEEMA COVERS FOR SPLICES 7 1.6 FAIRING, FOIL FAIRING 8 1.7 ROPE, GOLDROPE (POLYET./POLYPROP.) 3 STR. 9 1.8 TWINE, PE (POLYETHYLENE), BRAIDED 9 1.9 TWINE, NYLON (POLYAMIDE) BRAIDED 9 1.10 ROPE, BRAIDED NYLON (POLYAMIDE ) W/CORE 10 1.11 MOORING-ROPE “TIMM SIGNAL SAFETY” 10 1.12 ROPE , NYLON (POLYAMIDE) 3 STRAND, WHITE 10

2. MISC. HARDWARE 11

2.1 SHACKLE, REDPIN H-/BOW-SHACKLE, GALV., BOLT & NUT "SAFETY TYPE" 11 2.2 SHACKLE, REDPIN D-SHACKLE, GALV., BOLT & NUT "SAFETY TYPE" 11 2.3 SHACKLEBOW H/B AND D-BOW, BOW ONLY ( US FED. SPEC. RR-C-271 TYPE) 11 2.4 SHACKLE, D-SHACKLE, STAINLESS WITH EYEPIN (STANDARD TYPE) 12 2.5 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK PIN 12 2.6 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK ALLEN KEY PIN 12 2.7 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK ALLEN KEY PIN +LOCKING NUT 12 2.8 SHACKLE, "BOSS" H/BOW TYPE, STAINLESS STEEL. BOLT & NUT ("SAFETY TYPE") 13 2.9 SHACKLE, "BOSS" H/BOW TYPE, STAINLESS STEEL. IN S 165 M MATERIAL . 13 2.10 SPLIT LINK/C-LINK "BOSS" DL-TYPE, STAINLESS 14 2.11 HOOK, "BOSS" WITH SPLIT LINK OPENING, DL-TYPE, STAINLESS 14 2.12 HOOK, "BOSS" G-HOOK (GH), STAINLESS 14 2.13 HOOK, "BOSS" G-HOOK (GH), STAINLESS W/SAFETY LATCH 14 2.14 HOOK, "BOSS" G-HOOK WITH SPLIT LINK OPENING (GH), STAINLESS 15 2.15 LINK , "BOSS" RECESSED LINK (L), STAINLESS 15 2.16 HOOK, BOSS 7 S WITH SAFETY LATCH 15 2.17 HOOK, "V IKING" G-HOOK (EAG), YELLOW PAINTED (GRADE 80) 16 2.18 HOOK, "V IKING" G-HOOK (EVG), YELLOW PAINTED (GRADE 80) 16 2.19 LINK , "V IKING" RECESSED LINK (EVR), YELLOW PAINTED (GRADE 80) 16 2.20 LINK , "V IKING" KELLY 'S EYE (EVR), YELLOW PAINTED (GRADE 80) 16 2.21 LINK , "V IKING" RECESSED LINK (EVM), YELLOW PAINTED (GRADE 80) 16 2.22 HOOK, "V IKING" G-HOOK W/SPLIT LINK , YELLOW PAINTED (GRADE 80) 17 2.23 “VIKING” COMPONENTS WHICH FITS TOGETHER: 17 2.24 THIMBLE , SOLID THIMBLE FOR TOW ROPES 18 2.25 THIMBLE, SOLID THIMBLE WITH HOOKS, FOR FIBER ROPES 18 2.26 THIMBLE, SOLID THIMBLE WITH LINKS, FOR FIBER ROPE 19 2.27 THIMBLE , SOLID THIMBLE WITH “BOSS” S 7 HOOK 20 2.28 THIMBLE , TUBULAR THIMBLE, STAINLESS "HEAVY DUTY" FOR ROPE 21 2.29 THIMBLE , TUBULAR THIMBLE, BLUE PAINTED 21 2.30 THIMBLE, STANDARD TYPE, GALVANIZED 22 2.31 THIMBLE , STANDARD TYPE, STAINLESS 22 2.32 SWIVEL, STANDARD, STAINLESS 23 2.33 SWIVEL WITH FLEXIBLE LINK, STAINLESS 23 2.34 SWIVEL, STAINLESS WITH BRONZE BUSHING 23 2.35 SWIVEL, WITH BALL BEARING, BLUE PAINTED 23 2.36 LINK , P-LINK/QUICK LINK, STAINLESS 24 2.37 LINK , P-LINK/QUICK LINK, LINKED, STAINLESS 24 2.38 LINK , P-LINK/QUICK LINK, GALVANIZED 24 2.39 CARABINE HOOK, STAINLESS 25 2.40 CARABINE HOOK, GALVANIZED 25 2.41 CARABINE HOOK SAFETY, STAINLESS 25 2.42 HOOK, OPEN OKE-TYPE, GUNNEBO 25 2.43 HOOK, SAFETY EKN-TYPE W/ LATCH, GUNNEBO 26 2.44 HOOK, OPEN, EK-TYPE, GUNNEBO 26 2.45 HOOK, STAINLESS W/LATCH & CLEVIS, NGHF-TYPE 26

http://issuu.com/action/page?page=5

























2.46 HOOK, STAINLESS W/LATCH, NOHF-TYPE 27 2.47 HOOK, SAFETY CARGO, SH/BK-TYPE 27 2.48 HOOK, SAFETY CARGO WITH SWIVEL SHS/BKL-TYPE 27 2.49 HOOK, SAFETY CARGO WITH CLEVIS, SHC/CLC-TYPE 28 2.50 HOOK, RAM HOOK (PECK & HALE) 29 2.51 MASTER LINK MT-TYPE GRADE 100 (GUNNEBO) 30 2.52 MASTER LINK M-TYPE GRADE 100(GUNNEBO) 30 2.53 MASTER LINK, Q-TYPE (A/S KJÆTTINGFABRIKKEN) 31 2.54 MASTER LINK, B-TYPE (A/S KJÆTTINGFABRIKKEN) 31 2.55 TURNBUCKLE WITH SWIVEL & FORK-TERMINATIONS, STAINLESS 32 2.56 TURNBUCKLE WITH FORK-TERMINATIONS, STAINLESS 32 2.57 TURNBUCKLE WITH FORK-TERMINATIONS, GALVANIZED 33 2.58 LOADBINDER "LEBUS" 33 2.59 SWAGES (TALURITS) 34 2.60 WIRE CLIPS, “U-BOLT”, “IRON GRIP” AND “ASEKE” 34 2.61 SWAGING MACHINE, WIRE PRESS – “EISHIN” 35 2.62 ENERPAC PATG 1102N/1105N 36 2.63 BOLT & NUT “BUMAX” A4 8.8 STAINLESS 37 2.64 BOLT & NUT “STANDARD” A4 80 STAINLESS 38 2.65 NUT, LANFRANCO SELF LOCKING NUT, STAINLESS A4-80 38

3. CHAIN AND HAMMERLOCKS 39

3.1 CHAIN, LONG LINK STAINLESS STEEL (DIN 763 / DIN 5685C) 39 3.2 CHAIN, SHORT LINK STAINLESS STEEL (DIN 766) 39 3.3 CHAIN, SPECIAL QUALITY FOR DEFLECTOR & GUN HANG, ML, ALLOY, (GRADE 80) 39 3.4 CHAIN, FOR DEFLECTOR & GUN HANG, ML, ALLOY, (GRADE 80) 40 3.5 CHAIN, SHORT LINK, ALLOY, (GRADE 80) 40 3.6 CHAIN, MID-LINK, ALLOY, (GRADE 80) 40 3.7 CHAIN, LONG LINK, ALLOY, (GRADE 80) 40 3.8 SHORT LINK LIFTING CHAIN (GRADE 80) 41 3.9 SHORT LINK LIFTING CHAIN (GRADE 100) 41 3.10 GM-CHAIN CONNECTORS (GRADE 80) (A/S KJÆTTINGFABRIKKEN) 41 3.11 G/GF-CHAIN CONNECTORS (GRADE 80) FROM GUNNEBO 41

4. RUBBER SPACERS & "BETTIS" 42

4.1 RUBBERSPACER, MOULDED 42 4.2 "BETTIS” SHOCK ABSORBER (SINGLE REPLACEMENT RUBBERS) 43

5. BLOCKS 44

5.1 BLOCK, SNATCH BLOCK, GALV. (KS-TYPE) 44 5.2 BLOCK, SNATCH-BLOCK, GALV. (MEDIUM WIDE KS-TYPE) 44 5.3 BLOCK, SNATCH BLOCK, GALV. (WIDE KS-TYPE) 44 5.4 BLOCK, SINGLE SHEAVE (KT-TYPE), HOT DIP GALV. 45 5.5 BLOCK, DOUBLE SHEAVE (KT-TYPE), HOT DIP GALV. 45 5.6 BLOCK, SINGLE NYLON SHEAVE (KT-TYPE) HOT DIP GALV. 45 5.7 BLOCK, STAINLESS, SINGLE SHEAVE (KT-TYPE) 45 5.8 BLOCK, STAINLESS, DOUBLE SHEAVE (KT-TYPE) 46 5.9 BLOCK, TRAWL-BLOCK DESIGN (K-TYPE) 46 5.10 BLOCK, SINGLE SHEAVED “MØLLERODDEN” (B1 AND F1 TYPE) 47 5.11 BLOCK, DOUBLE SHEAVED “MØLLERODDEN” (B2 AND F2 TYPE) 48 5.12 BLOCK, SNATCH BLOCK “MØLLERODDEN” 49

6. MISC. TOOLS & EQUIPMENT 50

6.1 BAND-IT ® 50 6.2 MARLINE SPIKES FOR WIRE, HARDENED STEEL 50 6.3 FID, STAINLESS STEEL, FOR SPLICING OF FIBER ROPE 50 6.4 FID FOR SPLICING OF HOLLOW BRAIDED ROPES 50 6.5 FID FOR SPLICING OF HOLLOW BRAIDED ROPES („SELMA“) 51 6.6 HEAVING LINE WITH BALL (27M) 51 6.7 WIRE-CUTTER 51 6.8 WICTOR INOX POCKET KNIVES 51 6.9 SHEATH KNIFE WITH BLUE HANDLE (STAINLESS STEEL) "FROST" 51




























6.10 SHEATH KNIFE WITH RED HANDLE "FROST" 52 6.11 TAPE, “SILVER MILLION ” & „DENSO“ 52 6.12 SHEATH KNIFE W/RUBBER GRIP "ERGO" (STAINLESS STEEL) 52 6.13 MELTING-KNIFE (FOR ROPE) 52 6.14 CHINESE FINGER - MISC. TYPES 53 6.15 LINE THROWER, PNEUMATIC GUN LAUNCHER 53 6.16 SAFETY LANYARD 54 6.17 CABLE GRIP – “OCTOPUS GRIP” 55

7. WIRE – STEEL WIRES 57

7.1 STEEL WIRE ROPE, STAINLESS AISI 316, 6X36+STEEL CORE (160 KP/MM²) 57 7.2 STEEL WIRE ROPE, STAINLESS AISI 316, 6X36+FIBER CORE (160 KP/MM²) 57 7.3 STEEL WIRE ROPE, STAINLESS AISI 316, 7X19 (STEEL CORE) (160 KP/MM²) 57 7.4 STEEL WIRE ROPE, GALVANIZED , 6X36+FIBER CORE (180 KP/MM²) 58 7.5 STEEL WIRE ROPE, GALVANIZED , 35X7 NON ROTATING ( 200 KP/MM²) 58 7.6 SOCKETS 58 7.7 SOCKETING MATERIAL / WIRELOCK 58

8. ANODES 59

8.1 ALUMINIUM ANODES 59 8.2 ZINK ANODES 59 8.3 ZINK SHAFT ANODES 60

9. POLYFORM U.S. BUOYS & FENDERS 61

9.1 A-SERIES 61 9.2 F-SERIES 61 9.3 G-SERIES 61 9.4 HTM-SERIES 62 9.5 FENDER HD 265 “HEAVY DUTY ” 63 9.6 MOB BUOY 64 9.7 MOB BUOY - SPARE PARTS 64

10. CABLE WINDER & CABLE LIFTING EQUIPMENT 65

10.1 REEL / DRUM WINDER FOR CABLES & UMBILICALS 65 10.2 SPREADER, ADJUSTABLE, FOR LIFTING OF REELS 66 10.3 REEL / DRUM ROLLER, ADJUSTABLE, WITH BEARINGS 67

11. FIBER LIFTING AND LASHING EQUIPMENT 68

11.1 LASHING, POLYESTER WEBBING, WITH WINCH (COMPLETE) 68 11.2 LASHING, POLYESTER WEBBING, WITH STAINLESS WINCH (COMPLETE) 68 11.3 LIFTING SLING, POLYESTER WEBBING, WITH EYES 68 11.4 LIFTING SLING, ENDLESS/CIRCULAR, POLYESTER FIBER, 69

12. TROLLEY & CHAIN HOISTS 70

12.1 TROLLEY, SVERO 70 12.2 TROLLEY, YALE 71 12.3 CHAIN HOIST, KITO 72 12.4 CHAIN HOIST, NITCHI 72

13. SAFETY EQUIPMENT 73

13.1 FALL ARRESTER “SALA - TALON” 73 13.2 FALL ARRESTER “SALA – MINI FALL ARRESTER” 73 13.3 FALL ARRESTER “SALA” 73 13.4 FALL ARRESTER - HARNESS 74 13.5 HELMET/HARD HAT 74 13.6 SHOES/BOOTS “STEEL TOE” BATA NATURAL TAHO ANTI SKID SOLE, LIGHT WEIGHT 75 13.7 GLASSES, PROTECTION 76 13.8 FALL PROTECTION “CABLOC” 77




























1. ROPES, COVERBRAIDING & FAIRINGS

1.1 DYNEEMA, PLEXUS 12S - BREAKING LOADS & WEIGHTS:

Dia kg pr. (1) Min breaking strength (2) mm 100m Kg

6 2,5 4 700 8 3,8 7 200 10 5,9 11 400 12 9,4 14 800 14 10,6 20 500 16 14,8 25 300 18 19,2 32 500 20 22,3 39 400 22 27,8 47 900 24 33,1 56 000 26 38,9 64 000 28 42,4 72 000 30 49,6 83 000 32 58,9 95 000 34 65,0 105 000 36 75,0 119 000 38 86,0 131 500 40 92,9 143 000 42 106,0 152 000

(1) + (2) Calculated values for weight and breaking loads. All manufacturing processes are carried out in accordance with our quality assurance program, certified acc. to NS-EN ISO9001.

APPLICATIONS: "MOORING AND TOWING PURPOSES"

Properties: • 12 parts braided • Material: Dyneema® SK 75 • Specific gravity: 0.96 • Water absorbsion: 0 • Critical temperature: appr. 66 ºC • Melting point: 145 ºC • Elongation at break:

• Rope: 4,5% • Fibre: 3,5%

• Colour: Yellow (others on request) • High resistance to:

• Abrasion • UV beams • Chemicals

• Superwide & towing ropes • Spread ropes • Winch ropes • With coverbraiding (Polyester, Dyneema and Other materials)

• With coverbraiding and fringe fairings • With different coatings • With different colours



1.2 COVERBRAIDING OF ROPES & CABLES All our coverbraiders have 24 carriers, which gives a good tight cover, and high flexibility in types of covers, lengths to be covered and in thickness of the cover. Commonly used fibers are Dyneema and Polyester. Dyneema is far better for abrasion and cutting than most synthetic fibers available today. This is why the Dyneema is preferred for pro tection of critical operations. (This is also the reason for this fiber to be prefe rred in products like cut-resistant gloves, bullet proof vests & helmets, automotive applications etc. ). For other applications the Polyester alternative is often preferred as a general protective cover for the Plexus ropes.

Cover braiding of cables with Plexus ropes as strength members incorporated in the sides. (for bottom seismic applications)

Dyneema cover details



1.3 FAIRING: DYNEEMA ® COVER & DYNEEMA ® FAIRING 1.4 FAIRING: POLYESTER COVER & DYNEEMA ® FAIRING

Our cover braider has installed a fringe fairing de vice which automatically picks up the fairing part of the cover and cuts it in a pre- set length during the cover braiding process. 1.5 COVER: POLYESTER COVER & DYNEEMA COVERS FOR SP LICES

We provide loose covers for covering eyes & splices in polyester and Dyneema material. Art. No. article:

57005121 DYNEEMA COVER MAX Ø 20mm 57005130 DYNEEMA COVER MAX Ø 30 mm 57005144 DYNEEMA COVER MAX Ø 44 mm 57005148 DYNEEMA COVER MAX Ø 48mm 57005160 DYNEEMA COVER MAX Ø 60mm 57005175 DYNEEMA COVER MAX Ø 75mm 57005190 DYNEEMA COVER MAX Ø 90 mm 57005199 DYNEEMA COVER MAX Ø100mm

57005290 POLYESTER COVER MAX Ø 90mm

Polyester cover with Dyneema fairing Dyneema cover with Dyneema fairing



1.6 FAIRING, FOIL FAIRING

The foils are moulded in a durable & flexible PA ma terial, suitable for rough handling. The foils have excellent resistance towards crushin g forces, and also contain flexibility within the material which makes the lev el of chafing towards the rope at a minimum. This particular material quality is also contributi ng to prevent the foil from breaking and create sharp edges which might damage the ropes .

Art. No. Article Farge

57000116 FOIL FAIRING FOR Ø16mm ROPE Yellow

57000118 FOIL FAIRING FOR Ø18mm ROPE White/Natural

57000122 FOIL FAIRING FOR Ø22mm ROPE Yellow

57000128 FOIL FAIRING FOR Ø28mm ROPE Orange

57000132 FOIL FAIRING FOR Ø32mm ROPE Red Art. No. 57000132 57000128 57000122 57000118 570001 16

Size Ø32 mm Ø28 mm Ø22 mm Ø19 mm Ø16 mm Colour RED ORANGE YELLOW NATURAL YELLOW

As a comparison: A rope with fringe fairings will normally have a dr ag coefficient of 1,8 – 1,9. A rope in same size with foil fairings will have a drag coefficient of 0,15 - 0,30 !! Furthermore there is also one more really big advan tage when using the foil fairings: The foil fairings have shown that the acoustic nois e has been significantly reduced .



1.7 ROPE, GOLDROPE (POLYET./POLYPROP.) 3 STR.

Art. Nr. Dim. Approx. kg/110m

Breaking load

Coil

52100400 4mm 305kp 110m 52100500 5mm 1,38 440kp 110m 52100600 6mm 1,98 670kp 110m 52100700 7mm 2,36 910kp 110m 52100800 8mm 3,30 1200kp 110m 52101000 10mm 4,95 1900kp 110m 52101200 12mm 7,15 2800kp 110m 52101400 14mm 10,00 3600kp 110m 52101600 16mm 12,70 4550kp 110m 52101800 18mm 16,40 5550kp 110m 52102000 20mm 20,00 6650kp 110m 52102200 22mm 24,00 8100kp 110m 52102400 24mm 28,50 9300kp 110m 52102600 26mm 33,80 10950kp 110m 52102800 28mm 39,00 12600kp 110m 52103200 32mm 50,50 16000kp 110m 52103600 36mm 64,50 20100kp 110m 52104000 40mm 79,00 24300kp 110m GOLD ROPE HAS A YELLOW/ ORANGE COLOUR ("GOLDEN")

1.8 TWINE, PE (POLYETHYLENE), BRAIDED

Art. Nr. Dim. Colour m/kg 56062510 2,5mm Red 360 56062520 2,5mm Green 360 56063010 3,0mm Red 270 56063020 3,0mm Green 270 56063510 3,5mm Red 225 56063520 3,5mm Green 225 56064010 4,0mm Red 200 56064020 4,0mm Green 200 56064510 4,5mm Red 165 56064520 4,5mm Green 165 56065020 5,0mm Green 127 56066020 6,0mm Green 80-85 56066030 6,0mm Green-White 56068020 8,0mm Green

APPROX. 2 KG PR. SPOOL - 16KG (8 SPOOLS) PR. BAG. 1.9 TWINE, NYLON (POLYAMIDE) BRAIDED

Art. Nr. Dim. Colour m/kg 56070200 2,0mm White 280 56070300 3,0mm White 190 56070400 4,0mm White 130 56070500 5,0mm White 110 56070600 6,0mm White 90 56070700 7,0mm White 75 56070800 8,0mm White 65 56071000 10,0mm White 50 56071400 14,0mm White 26

APPRX. 2 KG PR. SPOOL - 16KG (8 SPOOLS) PR. BAG. BRAIDED NYLON MAY ALSO BE SUPPLIED AS BLACK-IMPREG NATED



1.10 ROPE, BRAIDED NYLON (POLYAMIDE) W/CORE

Art. Nr. Dim. Colour Approx. weight Breakingload Kg/110m

56080008 8,0mm White 4,5 1540kp 56081000 10,0mm White 7 2900kp 56081200 12,0mm White 9,8 3700kp 56081400 14,0mm White 14 5300kp 56081600 16,0mm White 18 6800kp 56081800 18,0mm White 22,5 8000kp 56082000 20,0mm White 28,5 9400kp

1.11 MOORING-ROPE “TIMM SIGNAL SAFETY”

APPLICATIONS: MOORING & TOWING

Art. No. Diameter kg/220m MBL (kp)

40mm 164 31500 44mm 193 36800 48mm 235 43200 52mm 271 50400 56mm 321 57800 60mm 364 65200 64mm 414 73700 68mm 472 83500 72mm 528 93000 80mm 649 113200 88mm 786 135900

1.12 ROPE , NYLON (POLYAMIDE) 3 STRAND, WHITE

Art. Nr. Dim. Colour Approx. kg/110m

Breakingload (kp)

52011000 10mm White 7,2 2080kp 52011200 12mm White 10,3 3000kp 52011400 14mm White 14 4100kp 52011600 16mm White 18,3 5300kp 52011800 18mm White 23 6700kp 52012000 20mm White 28,5 8300kp

52013200 32mm White 73 20000kp 52013600 36mm White 92 24800kp 52014000 40mm White 114 30000kp 52014400 44mm White 139,5 36000kp 52014800 48mm White 165 42000kp



2. MISC. HARDWARE 2.1 SHACKLE, REDPIN H-/BOW-SHACKLE, GALV., BOLT & N UT "SAFETY TYPE" US fed. Spec. RR-C-271

Art. nr size WLL A B C D E kg/100 (6:1) mm mm mm mm mm

23010050 1/2" 2 t 13 16 22 51 33 35,0 23010051 5/8" 3,25 t 16 19 26 64 42 70,0 23010052 3/4" 4,75 t 19 22 31 76 51 120,0 23010053 7/8" 6,5 t 22 25 36 83 58 170,0 23010054 1" 8,5 t 25 28 43 95 68 250,0 23010055 1 1/8" 9,5 t 28 30 47 108 74 340,0 23010056 1 1/4" 12 t 32 35 51 115 83 480,0 23010057 1 3/8" 13,5 t 35 38 57 133 89 700,0 23010058 1 1/2" 17 t 38 42 60 146 98 900,0 23010059 1 3/4" 25 t 44 50 73 178 127 1500,0 23010060 2" 35 t 51 58 83 197 146 2200,0 23010061 2 1/2" 55 t 64 70 105 267 184 4400,0 2.2 SHACKLE, REDPIN D-SHACKLE, GALV., BOLT & NUT " SAFETY TYPE" US fed. Spec. RR-C-271

Art. nr size WLL d D1 a d2 C kg/100 (6:1) mm mm mm mm mm

23010105 1/2" 2 t 13 16 21 30 41 30,0 23010106 5/8" 3,25 t 16 19 27 40 51 60,0 23010107 3/4" 4,75 t 19 22 32 46 60 110,0 23010108 7/8" 6,5 t 22 25 37 50 71 160,0 23010109 1" 8,5 t 25 28 43 58 81 230,0 23010110 1 1/8" 9,5 t 28 30 46 64 90 310,0 23010111 1 1/4" 12 t 32 35 52 72 100 440,0 23010112 1 3/8" 13,5 t 35 38 57 75 111 630,0 23010113 1 1/2" 17 t 38 42 60 86 122 800,0 2.3 SHACKLEBOW H/B AND D-BOW, BOW ONLY ( US FED. SPEC. RR-C-271 TYPE)

Art.Nr Type WLL A B C D E

20000112 1/2" D-Bow 2,00t 13 18 21 41 21 Standard bow 20000016 5/8“ D-Bow 3,25t 16 21 27 51 27 Standard bow 20000116 5/8“ H-Bow 3,25t 16 21 26 64 42 Standard bow 20000319 3/4" D-Bow 4,75t 19 21 32 60 32 Special for 20mm bolt

20000219 3/4" H-Bow 4,75t 19 21 31 76 51 Special for 20mm bolt

TYPICALLY USED FOR GUN HANG CHAINS ETC.



2.4 SHACKLE, D-SHACKLE, STAINLESS WITH EYEPIN (STAN DARD TYPE)

Art.Nr. Size WLL A B C D kg/100 (4:1) mm mm mm mm

23011004 1/8" 0,13 4 4 8 16 1,0 23011005 3/16" 0,2 5 5 10 17 2,0 23011006 1/4" 0,41 6 6 12 24 4,0 23011008 5/16" 0,53 8 8 13 32 7,0 23011010 3/8" 0,72 10 10 20 40 11,0 23011012 1/2" 1,55 12 12 21 48 25,0 23011016 5/8" 3,0 16 16 32 64 40,0 23011019 3/4" 3,8 20 20 38 76 60,0 23011022 7/8" 3,9 22 22 44 88 90,0 23011025 1" 4,8 24 24 50 100 110,0 23011032 1 ¼" 9,0 32 32 64 136 240,0 2.5 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK PI N Art.Nr. Size WLL A B C D E F Weight

(5:1) mm mm mm mm mm mm kg

23053011

SL 11s

3 t

122

62

27

20

70

43

0,9

23053012

SL 12s

6 t

136

74

34

24

73

57

1,8

23053014

SL 14s

10 t

160

88

42

33

86

68

2,6

May also be manufactured in duplex material upon special request in order to obtain higher breaking strengths.

2.6 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK AL LEN KEY PIN Art.Nr. Size WLL A B C D E F Weight


23053015

SL 11s

3 t

122

62

27

20

70

43

0,9


2.7 SHACKLE, "BOSS" STAINLESS STEEL, COUNTERSUNK AL LEN KEY PIN +LOCKING NUT M16 Self locking nut (Lanfranco HMS type) only 8mm high to obtain a flush design. Art.Nr. Size WLL A B C D E F Weight


23053016

SL 11s

3 t

122

62

27

20

70

43

0,95




2.8 SHACKLE, "BOSS" H/BOW TYPE, STAINLESS STEEL. BO LT & NUT ("SAFETY TYPE") Art. Nr. Type WLL A B C D E F G H Weight

(6:1) mm mm mm mm mm mm mm mm kg 20000203 B 3 S 3t 30 19 40 57 15 68 100 40 0,6 20000206 B 6 S 6t 38 25 58 84 27 111 150 62 2,4 20000208 B 8 S 8t 50 33 75 114 31 138 195 70 3,8 20000210 B 10 S 10t 50 37 84 119 34 150 210 82 5,5 20000215 B 15 S 15t 64 44 101 141 42 185 256 101 9,5 20000225 B 25 S 25t 79 51 131 180 56 225 319 114 16,0 2.9 SHACKLE, "BOSS" H/BOW TYPE, STAINLESS STEEL. IN S 165 M MATERIAL. BOLT WITH 1 ½ NUT & LOCK. PIN. ("SAFETY TYPE")

Art. Nr. Type WLL A B C D E F G H Weight (6:1) mm mm mm mm mm mm mm mm kg

20000055 B 3 S 5t 30 18 40 57 15 68 100 40 0,6 20000060 B 6 S 9,5t 38 25 58 84 27 111 150 62 2,4 20000065 B 8 S 11,3t 50 33 75 114 31 138 195 70 3,8 20000066 B 10 S 15t 50 37 84 119 34 150 210 82 5,5 20000068 B 15 S 18,5t 64 44 101 141 42 185 256 101 9,5



2.10 SPLIT LINK/C-LINK "BOSS" DL-TYPE, STAINLESS

Art. Nr. Size WLL (5:1)

A B C D E Weight

kg mm mm mm mm mm 23040001 DL 18 s 200 76 44 18 15 50 0,18 23040002 DL 19 s 400 80 51 24 19 49 0,29 23040003 DL 20 s 500 83 56 23 18 49 0,32 23040004 DL 21 s 1 400 113 65 23 24 70 0,64 23040005 DL 22 s 1 300 110 74 33 23 70 0,61 2.11 HOOK, "BOSS" WITH SPLIT LINK OPENING, DL-TYPE , STAINLESS


A B C D E Weight

kg mm mm mm mm mm 23030026 DL 26 s 2 400 150 95 39 28 16 1,70 23030001 DL 27 s 5 000 212 130 58 33 23 3,70 23030028 DL 28 s 12 000 260 163 61 49 29 9,80 2.12 HOOK, "BOSS" G-HOOK (GH), STAINLESS

Art. Nr. Size WLL (5:1) A B C D E F Weight kg mm mm mm mm mm mm

20130303 GH 3 S 3 000 118 76 16 27 25 42 0,9 kg 20130304 GH 3

S 165 M 4 000 118 76 16 27 25 42 0,9 kg

20160606 GH 6 S 6 000 178 108 22 36 34 61 2,9 kg 20160606 GH 6

S 165 M 8 000 178 108 22 36 34 61 2,9 kg

S 165 M is a duplex material quality 2.13 HOOK, "BOSS" G-HOOK (GH), STAINLESS W/SAFETY L ATCH


A B C D E Weight

kg mm mm mm mm mm 20130323 GH 3 Safety 3 000 118 76 16 27 25 0,9 kg 20130324 GH 4 Safety

S 165 M 4 000 118 76 16 27 25 0,9 kg

20130326 GH 6 Safety S 165 M

8 000 118 76 16 27 25 2,9 kg

S 165 M is a duplex material quality

20130300 SPARE: SAFETY LATCH FOR GH3+GH4 “SAFETY”



2.14 HOOK, "BOSS" G-HOOK WITH SPLIT LINK OPENING (G H), STAINLESS

Art. Nr Size WLL (5:1)

WLL (5:1)

A B C D Weight

kg Lbs mm mm mm mm 20130313 GH 4 S 3000,0 6 614 122 76 16 25 0,9 kg 20130314 GH 4

S 165 M 4000,0 8 818 122 76 16 25 0,9 kg

S 165 M is a duplex material quality

2.15 LINK, "BOSS" RECESSED LINK (L), STAINLESS

Art. Nr size design No.

WLL (5:1)

A B C D weight

kg mm mm mm mm 20140303 L 3 S 2110 3 000 140 82 34 20 0,8 kg 20140304 L 3 S S 165 M 2115 4 000 140 82 34 20 0,8 kg 20150606 L 6 S 2120 6 000 176 103 50 27 1,6 kg 20000070 L 6 s S 165 M 2116 8 000 176 103 50 27 1,6 kg

165-M is a duplex material quality 2.16 HOOK, BOSS 7 S WITH SAFETY LATCH

Art. No. Type Weight A B C D E F G MBL WLL [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [ton] [to n]

23700005 BOSS 5 S 0,5 27 66 111 18 20 49 24 5 1 23700006 BOSS 6 S 0,6 38 77 133 14 26 62 27 6 1,25 23700007 BOSS 7 S 1,2 36 90 155 20 28 66 26 12 2,40



2.17 HOOK, "VIKING" G-HOOK (EAG), YELLOW PAINTED (G RADE 80) Art. No. Type WLL A B C C1 D E Weight

5:1 mm mm mm mm mm mm kg/pcs. 23080104 EAG 04 4,2 123 78 26 16 21 26 0,90 23080106 EAG 06 6,4 175 103 28 21 32 28 2,65

2.18 HOOK, "VIKING" G-HOOK (EVG), YELLOW PAINTED (G RADE 80) Art. No. Type WLL A B C C1 D E Weight

5:1 mm mm mm mm mm mm kg/pcs. 23080103 EVG 03 3 115 70 30 30 17 20 0,65 23080105 EVG 05 5 132 82 38 38 17 26 1,20 23080108 EVG 08 8 153 97 42 42 18 30 1,90 23080110 EVG 10 10 180 115 40 30 20 35 3,30 23080115 EVG 15 15 215 135 50 40 18 45 6,05 23080120 EVG 20 20 240 155 60 50 27 50 8,40 2.19 LINK, "VIKING" RECESSED LINK (EVR), YELLOW PAI NTED (GRADE 80) Art. No. Type WLL A B C D E Weight

5:1 mm mm mm mm mm kg/pcs. 23080208 EVR 08 8 175 97 38 14 25 1,40 23080210 EVR 10 12 205 140 40 17 31 2,50 2.20 LINK, "VIKING" KELLY'S EYE (EVR), YELLOW PAINT ED (GRADE 80)

2.21 LINK, "VIKING" RECESSED LINK (EVM), YELLOW PA INTED (GRADE 80) Art. No. Type WLL A B C Ø Weight

5:1 mm mm mm mm kg/pcs. 23080310 EVM 100 10 100 36 14 21 0,80 23080312 EVM 120 12 122 48 19 25 1,70 23080315 EVM 150 15 170 75 17 30 2,80 23080320 EVM 200 20 185 85 25 34 4,20

Art. No. Type WLL A B B1 C C1 C2 D E Weight

5:1 mm mm mm mm mm mm mm mm kg/pcs. 23080215 EVR 15 15 175 150 90 52 40 65 17 25 2,20 23080225 EVR 20 20 225 185 125 80 45 106 26 41 5,10



2.22 HOOK, "VIKING" G-HOOK W/SPLIT LINK, YELLOW PAI NTED (GRADE 80) Art. No. Type WLL A B C D E Weight

5:1 mm mm mm mm mm kg/pcs. 23081030 DV 30 3 115 70 42 30 2,5 0,7kg 23081050 DV 50 5 130 80 42 36 2,5 1,1kg 23081080 DV 80 8 145 90 42 42 2,5 1,6kg 2.23 “VIKING” COMPONENTS WHICH FITS TOGETHER:

EVG 03 EVG 05 EVG 08 EVG 10 EVG 15 EVG 20 EAG 04 EAG 06 EVR 08 Fits each

other Fits each

other Fits each

other

EVR 10 Fits each other

Fits each other



EVM 100 Fits each other

Fits each other

Fits each other

Fits each other



Fits each other




2.24 THIMBLE, SOLID THIMBLE FOR TOW ROPES

Art. no. Article Ø-dia. (mm)

holesize (mm)

for rope (mm)

20012125 THIMBLE W/BOW "FG" 125mm SS F/30mm ROPE 10T 125 30 20012130 THIMBLE,ROPE 130x24-Ø 39 130 39 24 20012150 THIMBLE,ROPE 150x32-Ø 44 150 44 32

2.25 THIMBLE, SOLID THIMBLE WITH HOOKS, FOR FIBER R OPES

Art. No. Type Description 20010003 GH3-22SS-24/80 THIMBLE W/"BOSS" GH3S G-HOOK, WLL 3 TONNES 20010004 GH4-22SS-24/80 THIMBLE W/"BOSS" GH4 Safety G-HOOK, WLL 4 TONNES 20010006 GH6-25SS-24/80 THIMBLE W/"BOSS" GH6S G-HOOK, WLL 6 TONNES 20010007 GH6-25SS-32/105 THIMBLE W/"BOSS" GH6S Safety G-HOOK, WLL 8 TONNES

GH3 & GH4 ”Safety” GH3 & GH4 Standard

GH6 - 6 ton & GH6 - 8 ton in ”Safety” GH6 - 6 ton & GH6 - 8 ton in Standard



2.26 THIMBLE, SOLID THIMBLE WITH LINKS, FOR FIBER R OPE

Art. No. Type Description 20010103 GHR3-22SS-24/80 THIMBLE W/LINK FOR "BOSS" GH3S G-HOOK (3 & 4 ton) 20010106 GGHR6-25SS-24/80 THIMBLE W/LINK FOR "BOSS" GH6S G-HOOK (6 & 8 ton) 20010108 G10-32SS-32/105 THIMBLE W/LINK FOR SHACKLES & CONNECTORS

Solid thimble for GH 3 & GH 4

Solid thimble for GH 6 & GH 6 – 8 ton

Solid thimble for shackles & misc. connectors



2.27 THIMBLE, SOLID THIMBLE WITH “BOSS” S 7 HOOK

Art. No. Type Description

20010107 GS7S-22SS-24/80

SOLID THIMBLE WITH BOSS 7 S HOOK



2.28 THIMBLE, TUBULAR THIMBLE, STAINLESS "HEAVY DUTY" FOR ROPE

Art. No. Type A B C D E Weight for wire for rope max. max. mm mm mm mm mm kg/pcs. mm mm

23090815 G 815 K 15 91 27 5,0 9 0,39 12 10-14 23090820 G 819 K 19 113 31 5,0 11 0,61 16 15-18 23090824 G 824 K 24 136 46 5,0 15 1,11 21 23090828 G 827 K 27 142 45 5,0 15 1,34 24 19-24 23090830 G 831 K 31 163 48 7,0 19 1,84 28 25-28 23090838 G 839 K 39 179 60 5,5 20 1,68 35 29-36

23090849 G 848 K 48 220 74 5,5 32 2,90 44 23090860 G 860 K 60 260 81 8,5 38 5,90 54

2.29 THIMBLE, TUBULAR THIMBLE, BLUE PAINTED

Art. No. Type A B C D E for wire for rope max. max. "K" type mm mm mm mm mm mm mm Art. No.

23090013 G 712 12 84 23 4,0 8 10 10-11 23090014 G 715 15 95 27 5,0 10 12 14 23090015 G 717 17 100 27 4,0 10 14 16 23090217 23010016 G 719 19 112 32 5,0 12 16 18 23090219 23090017 G 722 22 125 35 5,0 15 18 20 23090222 23090018 G 725 25 150 45 6,3 16 22 24 23090008 23090023 G 728 28 157 45 7,0 16 24 23090004 23090019 G 730 30 170 47 7,0 18 26 28 23090009 23090020 G 735 35 190 60 7,0 22 32 23-34 23090000 23090022 G 745 45 228 70 7,0 27 38 42 23090245

The tubular thimbles may be fitted with a "gusset" welded in as reinforcement. If such reinforcement is wanted, please add the let ter "K" after type name e.g. G 212 K



2.30 THIMBLE, STANDARD TYPE, GALVANIZED Art. No. TL IL IW for wire

max. mm mm mm mm

23091102 25 15 10 2 23091104 32 17 10 4 23091106 39 23 15 6 23091108 51 33 20 8 23091110 56 38 24 10 23091112 64 46 32 12 23091116 83 58 36 16 23091120 101 72 45 20 23091122 114 80 50 22 23091124 127 90 56 24 23091128 153 112 70 28 23091132 178 128 80 32 23091136 216 160 100 36 23091140 240 184 115 44 2.31 THIMBLE, STANDARD TYPE, STAINLESS

Art. No.

L1 L2 A1 A2 B S Wire

dia. mm mm mm mm mm mm mm

23091303 22 15 3 10,0 5,0 1,0 3 23091304 25 16 4 10,0 6,5 1,0 4 23091305 27 18 5 12,0 7,5 1,2 5 23091306 32 21 6 13,0 8,5 1,5 6 23091307 38 26 7 15,0 10,0 1,5 7 23091308 45 31 8 19,0 11,0 1,5 8 23091309 50 37 9 22,0 13,0 2,0 9 23091310 58 41 10 24,0 14,0 2 10 23091312 65 48 12 27,0 15,0 2,5 12 23091314 70 52 14 29,0 17,0 2,5 14 23091316 79 57 16 32,0 19,0 3 16 23091318 90 65 18 40,0 20,0 3 18 23091320 102 74 20 44,0 23,0 4 20 23091322 115 84 22 52,0 27,0 4 22 23091324 125 96 24 56,0 28,0 5 24 23091328 150 115 28 65,0 32,0 6 28



2.32 SWIVEL, STANDARD, STAINLESS

Art. Nr. Type Size WLL A B C D E Weight (5:1) mm mm mm mm mm

23120020 A 10 SS 3/8" 1,1 t 30 28 17 17 102 0,20 23120021 A 12 SS 1/2" 1,6 t 29 28 27 30,0 140 0,36 23120022 A 16 SS 5/8" 3,2 t 43 38 35 47 180 0,89 23120023 A 19 SS 3/4" 4,7 t 45 39 38 40 205 1,80 23120025 A 22 SS 7/8" 6,3 t 45 40 40 42 222 2,25 23120027 A 25 SS 1" 8,3 t 52 50 42 52,0 278 4,10 23120029 A 32 SS 1 1/4" 12 t 60 50 50 98 350 8,15 23120030 A 38 SS 1 1/2" 18 t 72 58 58 112 390 13,00 2.33 SWIVEL WITH FLEXIBLE LINK, STAINLESS

Art. Nr. Type Size WLL A B C D E Weight (5:1) mm mm mm mm mm

23120031 A 12 SSF 1/2" 1,6 t 30 28 28 34,0 160 0,56 23120032 A 16 SSF 5/8" 3,2 t 41 38 37 48 200 1,20 23120033 A 19 SSF 3/4" 4,7 t 44 40 40 54 235 2,00 23120034 A 22 SSF 7/8" 6,3 t 44 40 40 55 255 2,90 23120035 A 25 SSF 1" 8,3 t 55 50 45 70,0 320 4,70 23120036 A 32 SSF 1 1/4" 12 t 55 55 54 93 360 9,20 23120037 A 38 SSF 1 1/2" 18 t 62 58 60 110 410 14,60 23120038 A 45 SSF 1 3/4" 28 t 75 70 70 115 515 24,00

2.34 SWIVEL, STAINLESS WITH BRONZE BUSHING Art. Nr. Type WLL MBL A B C D E F Weight

5:1 ton mm mm Mm mm mm mm kg/pcs. 23121533 SW 33 S 3,0 15,0 156 52 20 26 15 110 1,7

SW 35 S 5,0 25,0 180 57 25 31 15 127 2,3 23121560 SW 60 S 6,0 30,0 211 62 34 31 15 150 3,0

SW 40 S 15,0 75,0 335 105 48 51 32 234 12,8 2.35 SWIVEL, WITH BALL BEARING, BLUE PAINTED (WITH TAPERED ROLLER THRUST BEARING, GREASABLE)

Art. Nr. Type WLL A B C D E F G Weight 5:1 mm mm mm Mm mm mm mm kg/pcs.

23121401 A 401 1,0 126 43 16 15 36 18 35 0,60 23121402 A 402 2,0 157 54 20 20 45 22 45 1,50 23121403 A 403 3,0 189 65 27 26 55 28 55 2,50 23121405 A 405 5,0 220 70 33 30 64 33 60 3,90 23121408 A 408 8,0 250 85 42 34 73 39 75 6,80 23121412 A 412 12,0 295 95 50 41 86 45 86 10,80 23121417 A 417 17,0 395 120 57 52 113 55 108 22,30 23121422 A 422 22,0 435 131 60 52 118 63 118 29,70 23121432 A 432 32,0 500 160 65 59 132 73 140 45,00



2.36 LINK, P-LINK/QUICK LINK, STAINLESS

Art. Nr. Type Ø-size WLL A B C kg/100 Wrench size

(5:1) mm mm mm mm 23140002 DQ05SSO 5mm 0,45t 39 13 6,5 2,10 9 23140004 DQ06SSOL 6mm 0,58t 59 14 16,0 4,20 11 23140006 DQ08SSOL 8mm 0,98t 72 17 18,0 9,30 14 23140007 DQ10SSO 10mm 1,6t 85 20 20,0 16,00 16 23140008 DQ12SSO 12mm 2,2t 100 23 23,0 27,00 18 23140009 DQ14SSO 14mm 3,1t 115 27 27,5 42,00 22 23140010 DQ16SSO 16mm 4t 150 38 30,0 75,00 27 23140011 DQ19SSO 19mm 5,5t 175 43 35,0 120,00 32 23140012 DQ22SSO 22mm 7t 210 60 40,0 190,00 36 2.37 LINK, P-LINK/QUICK LINK, LINKED, STAINLESS

Art. Nr. Type Ø-size WLL A B Weight Wrench mm (5:1) mm mm kg size

23140015 DQ30SSO 30,0 12,00 170 55 3,20 41 2.38 LINK, P-LINK/QUICK LINK, GALVANIZED

Art. Nr. Type Ø-size WLL A B C kg/100 (5:1) mm mm mm

23142006 DQ06GAOL 6mm 0,35t 59 14 16,0 4,20 23142008 DQ08GAOL 8mm 0,65t 72 17 18,0 9,30 23142010 DQ10GAO 10mm 1t 85 20 20,0 16,00 23142012 DQ12GAO 12mm 1,25t 100 23 23,0 27,00



2.39 CARABINE HOOK, STAINLESS

Art. Nr Type Ø-size WLL A B C D kg/100 (5:1) mm mm mm mm

23122006 DC 06 SS 6mm 0,12t 60 8 11 9 2,80 23122007 DC 07 SS 7mm 0,18t 70 8 13 9 4,40 23122008 DC 08 SS 8mm 0,23t 80 8 13 9 6,60 23122010 DC 10 SS 10mm 0,35t 100 10 16 12 13,00 23130006 DC 11 SS 11mm 0,45t 120 11 18 16 19,00 23130007 DC 12 SS 12mm 0,57t 140 13 20 19 25,60

2.40 CARABINE HOOK, GALVANIZED

Art. Nr Type Ø-size WLL A B C D kg/100 (5:1) mm mm mm mm

23130001 DC 06 GA 6mm 0,12t 60 6 8 8 2,60 23130002 DC 07 GA 7mm 0,18t 70 7 10 9 4,40 23130003 DC 08 GA 8mm 0,23t 80 9 12 11 6,60 23130005 DC 10 GA 9mm 0,24t 90 9 12 11 9,20 23130009 DC 11 GA 10mm 0,25t 100 11 15 12 13,00 23130010 DC 12 GA 11mm 0,35t 120 12 16 17 18,60

2.41 CARABINE HOOK SAFETY, STAINLESS

Art. Nr Type Ø-size WLL A B C D kg/100 mm (5:1) mm mm mm mm

23141008 DC 08 SSS 8 0,7t 80 09 13 08 7,2 23141010 DC 10 SSS 10 1,1t 100 12 16 10 13,2 23141011 DC 11 SSS 11 1,3t 120 13 19 15 19,1

2.42 HOOK, OPEN OKE-TYPE, GUNNEBO

Art. Nr. Type Max. L B E F G H Weight load mm mm mm mm mm mm kg

23230035 OKE 10-8 3,2t 150 76 32 14 23 30 1,10 23230036 OKE 13-8 5,4t 182 90 40 18 32 38 2,30 23230037 OKE 16-8 8,0t 215 102 50 22 40 45 3,90 23230038 OKE 18/20-8 12,5t 247 114 60 26 46 50 6,00



2.43 HOOK, SAFETY EKN-TYPE W/ LATCH, GUNNEBO Art. No. Type WLL For

chain L B E F G H Weight

(approx.) tonnes mm mm mm mm mm mm mm Kg

23222006 EKN-6-8 1,12 6 94 24 22 10 17 19 0,4 23222007 EKN-7/8-8 2,0 7,8 105 28 25 11,5 17 22 0,5 23222010 EKN-10-8 3,2 10 131 37 32 13,5 20 29 0,9 23222013 EKN-13-8 5,4 13 161 42 40 17,5 27 36 1,8 23222016 EKN-16-8 8,0 16 197 52 50 22 34 44 3,4

2.44 HOOK, OPEN, EK-TYPE, GUNNEBO

Art. No. Type WLL For chain

L B E F G H Weight (approx.)

tonnes mm mm mm mm mm mm mm Kg 23220005 EK-6-8 1,12 6 94 29 22 10 16 19 0,3 23220007 EK-7/8-8 2,0 7,8 105 32 25 11,5 17 22 0,4 23220010 EK-10-8 3,2 10 131 42 32 13,5 19 29 0,8 23220013 EK-13-8 5,4 13 161 49 40 17,5 27 36 1,8 23220016 EK-16-8 8,0 16 197 60 50 22 34 44 3,2 23220018 EK-18/20-8 12,5 18,20 229 69 60 26 41 51 4,8 23220022 EK-22-8 15,5 22 267 83 64 31 42 67 8,5 23220026 EK-26-8 21,6 26 301 95 66 32 51 75 12,1

2.45 HOOK, STAINLESS W/LATCH & CLEVIS, NGHF-TYPE

Stainless steel clevis hook A very rugged hook specially constructed with an integral forged safety catch. The catch itself is particularly resistant to side loading. In the event of the hook being seriously overloaded the catch will spring out of position. The point of the hook is designed to prevent incorrect use with the relevant size of chain, and the design of the hook itself is such that the safety catch does not reduce hook admittance. The hook base is dimensionally to DIN 7541 and the technology in accordance with DIN 5691.

Art. Nr. Type Max. For L B Weight load chain mm mm Kg

20001106 NGHF-06 0,75t 6mm 81 26 0,40 20001108 NGHF-08 1,25t 8mm 101 35 0,76 20001110 NGHF-10 2,00t 10mm 121 39 1,44 20001113 NGHF-13 3,20t 13mm 138 53 2,60 20001116 NGHF-16 5,00t 16mm 176 69 4,90



2.46 HOOK, STAINLESS W/LATCH, NOHF-TYPE

2.47 HOOK, SAFETY CARGO, SH/BK-TYPE

Art. No. Type WLL B C D E F1 F2 G H L Weight

4:1 mm mm mm mm mm mm mm mm mm kg 23230060 SH-6 1,1 29 70 33 22 10 10 17 22 110 0,5 23230061 SH-7 2,0 37 88 45 25 11 11 21 23 135 0,8 23230062 SH-10 3,8 46 112 56 32 14 14 30 29 168 1,5 23230063 SH-13 6,2 60 145 70 40 18 16 36 38 208 2,8 23230064 SH-16 8,0 68 182 83 50 22 22 46 50 254 5,5 23230065 CL-20 12,5 78 196 102 66 20 27 58 54 274 7,9 23230066 CL-22 15,5 92 228 115 73 25 34 58 67 317 13,4 2.48 HOOK, SAFETY CARGO WITH SWIVEL SHS/BKL-TYPE

Art. No. Type WLL B C D F G H L M N Weight

4:1 mm mm mm mm mm mm mm mm mm kg 23230079 SHS-6 1,2 29 70 34 10 17 22 145 29 21 0,59 23230080 SHS-7 2,0 37 87 45 13 28 26 181 38 26 1,1 23230081 SHS-10 3,8 46 107 56 16 36 35 220 45 35 2,0 23230082 SHS-13 5,4 60 140 70 19 40 45 270 51 37 3,8 23230083 SHS-16 8,0 75 165 80 25 52 60 315 60 49 7,4

Art. Nr Type Max. For L B Weight load chain mm mm Kg

20001206 NOHF-06 0,75t 6mm 102 26 0,35 20001608 NOHF-08 1,25t 8mm 120 35 0,81 20001210 NOHF-10 2,00t 10mm 145 39 1,37 20001213 NOHF-13 3,20t 13mm 175 53 2,80 20001216 NOHF-16 5,00t 16mm 221 69 5,30



2.49 HOOK, SAFETY CARGO WITH CLEVIS, SHC/CLC-TYPE

Art. No. Type WLL B C D E G H L d Weight 4:1 mm mm mm mm mm mm mm mm kg

23230084 SHC-6 1,2 29 70 34 6,9 21 22 94 8 0,5 23230085 SHC-7 2,0 37 88 45 8,8 23 26 117 9 0,8 23230086 SHC-10 3,8 46 112 56 11,5 29 30 140 12,3 1,5 23230087 SHC-13 5,4 60 145 70 14,5 38 36 181 17 2,9 23230088 SHC-16 8,0 68 182 83 17,5 50 46 216 19,7 5,5 23230089 CLC-20 12,5 78 220 102 22,5 48 54 245 21,6 8,1



2.50 HOOK, RAM HOOK (PECK & HALE) SPECIFICATIONS:

TYPE: DIMENTIONS - CENTIMETRE A B C D E

H44-3 11,4 3,6 2,3 2,4 2,4 H44-9 17,8 5,5 4,2 5,1 3,8

H44-3L 11,4 3,6 2,3 2,4 2,4

PULL REQUIRED TO RELEASE LOAD

Art. No. Material

WLL kg

Min. break

strengt

Weight kg

No load

PULL REQ`D

Max. load

PULL REQ`D

20170443 Forged steel H44-3 2040 8170 0,9 0 7 1590 36 20170449 Forged steel H44-9 8170 32520 5,5 0 16 4540 54 20170440 Stainless

steel H44-3L 910 3630 0,9 0 7 910 32

INSTRUCTIONS FOR OPERATION 1. TO CLOSE HOOK: USE A RECOMENDED RING (3) ENGAGE THE SWING LINK (2), ROTATE THE SWING LINK TO FULLY UPRIGHT POSITION. SNAP THE LATCH LOCK (1) AGAINST THE HOOK BODY (SEE FIG. 1) TUG ON RING (3), TO CONFIRM PROPER ENGAGEMENT BEFORE APPLYING LOAD. (SEE FIG 1) 2. TO OPEN HOOK: PULL ON LACH LOCK (1) SWING

LINK (2) WILL OPEN ALLOWING FITTINGS TO BE RELEASED. (SEE FIG. 2)

3. A LANYARD MUST BE ATTACHED TO THE LACH LOCK (1) FOR REMOTE RELEASE.



2.51 MASTER LINK MT-TYPE GRADE 100 (GUNNEBO)

Art. No. Type WLL¹) (ton)

L1 L B D I b d Weight

β 0-45º mm mm mm mm mm mm mm kg MT-6-10*** 4,30 270 150 90 19 120 70 14 1,8

23210800 MT-8-10*** 6,25 300 160 95 22 140 80 17 3,0 23211000 MT-10-10*** 14,00 360 200 120 30 160 95 22 6,5 23211002 MT-13-10*** 21,25 450 250 150 40 200 120 30 15,0 23211600 MT-16-10*** 35,22 500 300 200 50 200 120 32 23,0 23211900 MT-20-10*** 43,75 550 300 200 55 250 150 38 33,0 23212200 MT-22-10 66,25 610 350 200 60 260 140 45 46,0

¹)If used with chain, check for corresponding WLL v alues in the WLL table acc. EN 818-4 (safety factor 4:1) *** with flattened section in two connected links

2.52 MASTER LINK M-TYPE GRADE 100(GUNNEBO) Art. No. Type WLL¹)

(ton) L B D Weight

β 0-45º mm mm mm kg M-6-10 1,50 100 60 11 0,2 M-86-10 3,00 120 70 14 0,4 M-108-10 5,00 140 80 17 0,8 M-13-10 5,40 150 90 19 1,0 M-1310-10 6,75 160 95 22 1,5 M-1613-10 12,50 190 110 25 2,3

23211019 M-19-10 15,00 200 120 30 3,5 M-2016-10 21,00 240 140 34 5,3 M-2220-10 31,00 250 150 38 7,0

23213407 M-2622-10 35,00 250 150 40 8,0 23213413 M-32-10 41,00 300 180 45 12 23213408 M-3226-10 53,00 300 200 50 15 23213409 M-3632-10 70,00 350 200 55 21 23213411 M-4536-10 87,50 375 210 60 26 ¹)If used with chain, check for corresponding WLL v alues in the WLL table acc. EN 818-4 (safety factor 4:1) *** with flattened section in two connected links



2.53 MASTER LINK, Q-TYPE (A/S KJÆTTINGFABRIKKEN)

Art. No. Type WLL Top-link Rings Weight 4:1 Dim. in mm Dim. in mm kg

23210050 Q.16.B 3,8 70 x 120 54 x 86 1,2 23210051 Q.20.B 5,8 90 x 170 70 x 120 2,5 23210052 Q.22.B 7,6 90 x 170 80 x 134 3,8 23210053 Q.25.B 10,0 100 x 190 80 x 134 4,5 23210054 Q.28.B 12,7 110 x 210 90 x 170 6,4

Q.32.B 15,2 140 x 270 100 x 190 9,9 23210057 Q.38.B 25,0 140 x 270 140 x 270 18,2 23210058 Q.45.B 34,0 170 x 320 140 x 270 27,7 23210060 Q.50.B 40,0 200 x 380 140 x 270 33,2

Q.60.B 58,0 220 x 430 200 x 380 66,0 Q.70.B 80,0 250 x 500 220 x 430 103,0

2.54 MASTER LINK, B-TYPE (A/S KJÆTTINGFABRIKKEN)

Art. No. Type WLL d B L Weight 4:1 mm mm mm kg

11.B.4 2,1 11 40 83 0,2 23210001 13.B.5 2,6 13 54 86 0,3 23210002 13.B.6 2,4 13 60 115 0,4 23210003 16.B.6 3,8 16 70 120 0,6 23210004 16.B.7 2,8 16 100 190 0,9 23210005 20.B.6 6,4 20 80 134 1,1 23210006 20.B.7 5,8 20 90 170 1,3 23210007 22.B.6 7,6 22 90 170 1,6

22.B.7 6,4 22 110 210 1,9 23210009 25.B.6 10,0 25 100 190 2,3 23210010 28.B.6 12,7 28 110 210 3,2

28.B.7 10,5 28 140 270 4,0 23210012 32.B.6 15,2 32 140 270 5,3 23210013 38.B.6 25,0 38 140 270 7,5

38.B.7 17,0 38 220 420 11,0 45.B.6 34,0 45 170 32 12,5 45.B.7 24,5 45 250 470 17,5 50.B.6 40,0 50 200 380 18,0 60.B.6 58,0 60 220 430 30,0 70.B.6 80,0 70 250 500 44,0



2.55 TURNBUCKLE WITH SWIVEL & FORK-TERMINATIONS, ST AINLESS Specially designed for aligning chains in towing ar rangements, (gun arrays etc.)

Art. No. Type MBL Adjustment Max length [ton] mm mm

23180015 M20 16 70 325 2.56 TURNBUCKLE WITH FORK-TERMINATIONS, STAINLESS

Length Length

Art. no. Article Size min max tube/

casing WLL

mm - inch mm mm length [mm] m d2 [sf 4:1]

23180005 TURNBUCKLE, STAINLESS 5 - 3/16" 123 175 75 7 5 0,1 23180006 TURNBUCKLE, STAINLESS 6 - 1/4" 131 185 79 7 6 0,3 23180008 TURNBUCKLE, STAINLESS 8 - 5/16" 168 248 106 10 8 0,5 23180010 TURNBUCKLE, STAINLESS 10 - 3/8" 200 292 127 12 10 0,8 23180012 TURNBUCKLE, STAINLESS 12 - 1/2" 233 350 150 14 12 1,4 23180016 TURNBUCKLE, STAINLESS 16 - 5/8" 298 450 192 19,5 16 1,8 23180020 TURNBUCKLE, STAINLESS 19 - 3/4" 413 590 275 22 16 2,4



2.57 TURNBUCKLE WITH FORK-TERMINATIONS, GALVANIZED

Art. No. Type WLL A B C D E F Weight 6:1 mm mm mm mm mm mm

23170001 1/4" 0,2t 220 100 14 7 5 145 0,13 23170002 5/16" 0,25t 245 110 17 9 6 165 0,17 23170003 3/8" 0,3t 290 125 20 11 8 190 0,30 23170004 1/2" 0,4t 430 195 35 13 11 285 0,70 23170005 5/8" 0,7t 540 230 44 16 12 370 1,35 23170006 3/4" 1,1t 625 270 50 20 16 425 2,25 23170007 7/8" 1,6t 690 295 60 25 19 480 3,10 23170008 1" 2,1t 740 325 65 30 22 520 4,50 23170009 1 1/4" 3,7t 900 370 85 40 28 630 8,00 23170010 1 1/2" 5,1t 980 400 100 42 32 690 13,00 23170011 1 3/4" 8,5 1060 400 108 45 38 760 20,00 23170012 2" 11,0 1125 400 115 58 45 820 28,00 2.58 LOADBINDER "LEBUS" Art. No. For chain Handle-length Tube

length Tighten length

Br. load Br. load

Weight

kN kp 23240008 8-10mm 356,0 254 203 84 8600 4,8 23240010 10-13mm 356,0 254 203 147 15000 5,8 23240013 13-16mm 356,0 254 203 205 20900 6,5



2.59 SWAGES (TALURITS)

• SWAGES OF ALUMINUM, STEEL AND COPPER

2.60 WIRE CLIPS, “U-BOLT”, “IRON GRIP” AND “ASEKE”



2.61 SWAGING MACHINE, WIRE PRESS – “EISHIN”

EH-8 ED-8 Hand Motor

Splicing Max. Dia. W 14ø Ordinary clamp S 20ø Flemish eye clamp

Time Required 41 sec. 16 sec. Capacity 80 T

Max Oil Pressure 700 kg/cm2

Power & Woltage 1ø 100 V

0,4 KW Weight 54 kg 75 kg

Dimensions 390 x 610 x 400mm

320 x 680 x 500mm

Art No. Description 20070008 Eishin swaging machine

20070106 Press dye W6 20070108 Press dye W8 20070110 Press dye W10 20070112 Press dye W12 20070114 Press dye S14 20070116 Press dye S16 20070118 Press dye S18 20070120 Press dye S20



2.62 ENERPAC PATG 1102N/1105N Maximum operating pressure: 700bar

Flow at rated pressure : 0,13 l/min Air consumption: 340 l/min

Dim. (mm)

Art. No. Model Usable oil capacity A B C D E H J K L M KG 20071102 PATG 1102N 2081 cm3 306 157 208 229 101 128 137 38 112 347 6,4 20071105 PATG 1105N 4227 cm3 396 201 216 229 101 137 146 83 120 437 9,1

1 - Filtered "Permanent" tank vent 2 - Return-to-tank / Auxiliary vent / Fill tank port 3 - Hydraulic Output 4 - Swivel air input with filter 5 - 4 mounting holes for #10 thread forming screw. Max. Depth into reservoir = 19 mm



2.63 BOLT & NUT “BUMAX” A4 8.8 STAINLESS

Bufab Stainless has since a long time been representing the strongest and most resistant products within stainless fasteners. Now we proudly present BUMAX 88. BUMAX 88 and 109 are fasteners having unique properties, enabling to move the limits ahead regarding strength, weight, corrosion resistance and total economy.

The strongest fastener in the market The BUMAX 88 and 109 fasteners are developed to achieve ultimate tensile and yield strength values in line with those of Steel-screws in class 8.8 and 10.9. The BUMAX products can also give top performance long after standard fasteners have reached their limits. The difference compared to conventional products is especially noticeable in extreme environments.

……made from the best material in the market The BUMAX fasteners are manufactured from a new variant of acid-proof Swedish steel SS 14.2343. We selected the best from many steels. The striking feature of the steel’s composition is its low Carbon content and increased content of Chromium and Nickel. Laboratory tests and practical application have shown that the special composition gives BUMAX products unsurpassed performance in a number of vital areas.

Art. No. Description: DIN ISO 20116090 BOLT S/S M16 x 90MM BUMAX A4-8,8 partly treaded 4014 20116100 BOLT S/S M16x100MM BUMAX A4-8,8 partly treaded 4014 20120080 BOLT S/S M20 x 80MM BUMAX A4-8,8 partly treaded 4014 20120100 BOLT S/S M20x100MM BUMAX A4-8,8 partly treaded 4014 20120110 BOLT S/S M20x110MM BUMAX A4-8,8 partly treaded 4014 20120120 BOLT S/S M20x120MM BUMAX A4-8,8 partly treaded 4014 20120150 BOLT S/S M20x150MM BUMAX A4-8,8 partly treaded 4014 20130100 BOLT S/S M30x100MM BUMAX A4-8,8 partly treaded 4014

20101600 NUT, A4 STAINL. (LOCKNUT) "NYLOCK" M16 with wax 985 20102000 NUT, A4 STAINL. (LOCKNUT) "NYLOCK" M20 with wax 985 20103000 NUT, A4 STAINL. (LOCKNUT) "NYLOCK" M30 with wax 985



2.64 BOLT & NUT “STANDARD” A4 80 STAINLESS

DIN 931 A4 80 Example: HEX HEAD BOLT M20x60

Threads d M16 M18 M20 M22 M24 M27 M30

Thread Pitch mm 2 2,5 2,5 2,5 3 3 3,5

Width Across Flat s mm 24 27 30 32 36 41 46

Head height k mm 10 12 13 14 15 17 19

Nom.gjengelengd. bmm

Nom.treadLength <125mm 38 42 46 50 54 60 66

Nom.trreadLength 125-200 mm. 44 48 52 56 60 66 72

Nom.treadLength >200 mm. 57 61 65 69 73 79 85

DIN 934 A4 80 Example: HEX NUT M20

Threads d M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30

thread pitch mm 1 1,25 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5

Width Across Flat s mm 11 13 17 19 22 24 27 30 32 36 41 46

Height m mm 5,5 6,5 8 10 11 13 15 16 18 19 22 24

All types of bolts, nuts, washers etc. available in different materials

Available (please specify in a request). 2.65 NUT, LANFRANCO SELF LOCKING NUT, STAINLESS A4- 80

Art. No. TYPE Height [mm]

20103016 SELF LOCKING NUT ESL M16 17 20103020 SELF LOCKING NUT ESL M20 21 20103017 SELF LOCKING NUT HMS M16 8 ESL HMS



3. CHAIN AND HAMMERLOCKS 3.1 CHAIN, LONG LINK STAINLESS STEEL (DIN 763 / DIN 5685C)

Art. No. TYPE MBL (kg) d A B weight mm mm mm (kg)

24202000 LL-02-316 125 2,0 22,0 8,0 0,15 24203060 LL-03-316 410 3,0 26,0 12,0 0,20 24204000 LL-04-316 650 4,0 32,0 16,0 0,27 24204001 LL-05-316 1300 5,0 36,0 20,0 0,43 24206000 LL-06-316 1800 6,0 42,0 24,0 0,63 24208000 LL-08-316 3200 8,0 54,0 32,0 1,10 20610316 LL-10-316 5000 10,0 66,0 40,0 1,75 20613316 LL-13-316 8700 13,0 82,0 50,0 2,95 20616316 LL-16-316 1330 16,0 100,0 60,0 4,45 20619316 LL-19-316 18400 19,0 127,0 76,0 6,20 3.2 CHAIN, SHORT LINK STAINLESS STEEL (DIN 766) Art. No. TYPE MBL

(kg) d A B weight

mm mm mm (kg) 24204036 KL-03-316 410 3,0 16,0 11,0 0,22 24204040 KL-04-316 650 4,0 16,0 14,0 0,32 24204042 KL-05-316 1300 5,0 18,5 17,0 0,50 24204046 KL-06-316 1800 6,0 18,5 20,0 0,75 24204047 KL-07-316 2500 7,0 22,0 23,0 1,00 24204050 KL-08-316 3200 8,0 24,0 26,0 1,35 20620316 KL-10-316 5000 10,0 28,0 34,0 2,25 20623316 KL-13-316 8700 13,0 36,0 44,0 3,80 20626316 KL-16-316 13300 16,0 45,0 54,0 5,80

KL-20-316 20,0 76,0 67,5 3.3 CHAIN, SPECIAL QUALITY FOR DEFLECTOR & GUN HANG , ML, ALLOY, (GRADE 80) This chain has got a special chemical composition w hich gives the material less stress than an ordinary Grade 80, resulting in a tougher material that absorbs loads and abrasion better, as well as giving less c orrosion. Art. No. TYPE MBL (kg) d A B Weight

(ton) mm mm mm (kg) 24120004 24mm 73,4 24 82 79,0 11,9



3.4 CHAIN, FOR DEFLECTOR & GUN HANG, ML, ALLOY, (GR ADE 80) Made from Grade 80 material in a marine quality. Art. No. TYPE MBL (kg) d A B Weight

(ton) mm mm mm (kg) 24110057 22mm 60,0 22 88 74,0 9,60

3.5 CHAIN, SHORT LINK, ALLOY, (GRADE 80)

Art. No. TYPE Min. break force d A B Weight mm mm mm

24110001 10mm 12,6 10 30 35 2,20 24110002 13mm 21,4 13 39 46 3,60 24110003 16mm 32,2 16 48 56 5,40 24110005 19mm 45,4 19 57 67 8,00 24110004 20mm 50,0 20 60 70 8,50 24110050 22mm 61,0 22 66 74 11,00 24110056 26mm 85,0 26 78 87 15,20

Dimensions and weights are guiding figures. 3.6 CHAIN, MID-LINK, ALLOY, (GRADE 80)

Art. No. TYPE Min. break force d A B Weight Min. br. force mm mm mm weight

24110005 10mm 12,6 10 40 35 2,00 24110006 13mm 21,4 13 52 46 3,30 24110007 16mm 32,2 16 64 56 4,90 24110008 19mm 45,4 19 76 67 6,90

Dimensions and weights are guiding figures.

3.7 CHAIN, LONG LINK, ALLOY, (GRADE 80)

Art. No. TYPE Min. break force d A B Weight mm mm mm

24110009 9mm 10,2 10 53 33,5 1,40 24110010 11mm 15,4 10 63 40,5 2,15 24110011 13mm 21,4 13 80 48,5 2,90 24110012 16mm 32,2 16 100 59 4,20 24110013 19mm 45,4 19 100 66 6,20 24110060 22mm 60 22 120 76 8,50 24110064 28mm 98 28 150 95 14,00 24110068 32mm 128 32 170 108 19,00

Dimensions and weights are guiding figures.



3.8 SHORT LINK LIFTING CHAIN (GRADE 80)

Art. No. TYPE WLL Proof load

Min. break force

d A B Weight

[ton] 4:1

[ton] [ton] mm mm mm

24110020 7mm 1,5 3,8 6,0 7 23 24,5 1,05 24110023 8mm 2,0 5,0 8,0 8 26 27,0 1,33 24110025 10mm 3,15 7,9 12,6 10 30 33,5 2,17 24110027 11mm 3,8 9,5 15,2 11 33 36,0 2,70 24110029 13mm 5,3 13,2 21,2 13 39 42,5 3,83 24110031 16mm 8,0 20,0 32,0 16 48 53,0 5,78

20mm 12,5 31,5 50,0 16 60 66,0 8,60

3.9 SHORT LINK LIFTING CHAIN (GRADE 100)

Art. No. TYPE WLL [ton]

Proof load

Min. break force

d A B Weight

4:1 [ton] [ton] mm mm mm 24110033 16mm 10 25,4 40,9 16 48 53,0 5,78

3.10 GM-CHAIN CONNECTORS (GRADE 80) (A/S KJÆTTINGF ABRIKKEN)

Art. No. TYPE WLL L B1 B2 E G N R Weight 4:1 mm mm mm mm mm mm mm kg

23320007 GM 7 2,0 56 17,5 51 22 7 7 11 0,1 23320010 GM 10 3,8 68 24 68 26 11 9 14 0,3 23320013 GM 13 5,4 88 29 84 34 14 13 18 0,6 23320016 GM 16 8,0 104 35 106 40 17 15 22 1,1 23320018 GM 18 12,5 122 42,5 117 47 21 18 26 1,7 23320022 GM 22 15,5 150 48 148 57 24 22 29 2,7

3.11 G/GF-CHAIN CONNECTORS (GRADE 80) FROM GUNNEBO Art. No. TYPE max.

load L B G E Weight

mm mm mm mm kg 23350007 GF 7 2,0 56 18 9 22 0,15 23352010 GF 10 3,2 68 25 11 26 0,3 23352013 GF 13 5,4 89 30 15 34 0,7 23352016 GF 16 8,0 106 36 19 41 1,1 23352018 GF 18 12,5 128 43 22 49 1,8 23352022 GF 22 15,5 150 50 24 59 3 23350026 GF 26 21,6 160 58 29 61 4,6 23350036 GF 32 32,0 200 70 36 78 8,6 GF IS GUNNEBO'S CHAIN CONNECTOR WITH THE PIN DESIGNED FOR F ISHING (PIN EQUAL TO THE TL-TYPE, GUNNEBO BUSH-TYPE) .



4. RUBBER SPACERS & "BETTIS" 4.1 RUBBERSPACER, MOULDED

Art. No. Størrelse weight in air

weight in sea

AxBxC 25040017 6 3/4" x 7" x 3" 4 0,6 25040016 8" x 12" x 3" 9 1,1 25040008 8" x 2" x 3" 1,8 0,3 25040009 4" x 8" x 2" 2 0,3 25040010 5" x 7" x 2" (egg/bead) 2 0,3

SPECIAL SOFT-MIX REINFORCED QUALITY FOR SHOCK-ABSORPTION:

20316510 165 x 100 x 75mm 2 0,3 20317117 171 x 178 x 75mm 4 0,6

5" X 7" X 2" 8" X 2" X 3"



4.2 "BETTIS” SHOCK ABSORBER (SINGLE REPLACEMENT RUB BERS)

I A B C D E F G H Weight

60 mm 60 mm 14 mm 49 mm 100 mm 250 mm 52 mm 1230 mm 1350 mm 6 kg

Art. no. 20221200 Single replacement rubber 1200 Lbs "Bett is" , Steel ends 20221201 Single replacement rubber 1200 Lbs "Bettis " , Stainless Steel ends 20221204 4-unit shock absorber, stainless steel end fittings 20221206 6-unit shock absorber, stainless steel end fittings

COMPLETE FOUR AND SIX UNIT BOAT SNUBBER WITH ORDINARY AND STAINLESS STEEL EYES AND TERMINATIONS

4-unit snubber



5. BLOCKS

5.1 BLOCK, SNATCH BLOCK, GALV. (KS-TYPE)

Art. No. Type WLL A B D E I weight

5:1 mm mm mm mm mm kg

26011120 KS2-1ECG 2,0 225 24 110 23 18 3,7

26011131 KS3-1ECG 3,0 300 28 150 30 18 7,5

26011140 KS4-1ECG 4,0 330 35 185 33 22 13,5

26011160 KS6-1ECG 6,0 378 41 210 35 24 19,4

5.2 BLOCK, SNATCH-BLOCK, GALV. (MEDIUM WIDE KS-TYP E)

Art. No. Type WLL A B D E I weight

5:1 mm Mm mm mm mm

26011361 KS-60-1ECG 6,0 375 60 215 50 50 24,0

26011363 KS-50-1ECG 4,6 325 60 150 80 60 15,2

26011340 KS-40-1ECG 3,5 250 45 110 45 38 7,5

5.3 BLOCK, SNATCH BLOCK, GALV. (WIDE KS-TYPE)

Art. no. WLL 5:1

A B D E F G I WEIGHT

TONN mm mm Mm mm mm mm mm kg 26011390 KS 110-1 ECG 3,0 255 85 110 68 85 70 45 10,8 26012157 KS 150-1 ECG 5,0 330 85 150 75 85 110 55 20,0 26012158 *KS 215-1 ECGP 8,0 425 100 215 95 100 170 63 39,5

*KS 215-1 EP - AVAILABLE ONLY WITH SPLIT AND LOCKING DEVICE.

0 = BRONZE BEARING IN SHEAVE E = SWIVEL EYE C = TESTED/CERTIFIED G = GALVANIZED

0 = BRONZE BEARING IN SHEAVE 1 = BALL BEARING IN S HEAVE E = SWIVEL EYE C = TESTED/CERTIFIED G = GALVANIZED H = HARDENED SHEAVE

0 = BRONZE BEARING IN SHEAVE 1 = BALLBEARING IN SH EAVE E = SWIVEL EYE C = TESTED/CERTIFIED G = GALVANIZED



5.4 BLOCK, SINGLE SHEAVE (KT-TYPE), HOT DIP GALV.

Art. No. Type WLL A B C D weight 5:1 Mm mm Mm Mm

26012210 KT 1-1ECGB 1,0 163 22 16 80 1,7 26012220 KT 2-1ECGB 2,0 195 24 22 110 3,2 26012230 KT 3-1ECGB 3,0 257 28 31 150 6,2 26012240 KT 4-1ECGB 4,4 330 35 40 185 11,4 26012260 KT 6-1ECGB 6,0 365 42 40 210 17,6

5.5 BLOCK, DOUBLE SHEAVE (KT-TYPE), HOT DIP GALV.

Art. No. Type WLL A B C D weight

5:1 mm mm Mm mm 26013210 KT 1D-1ECGB 1,0 187 22 16 80 3,1

26013220 KT 2D-1ECGB 2,0 224 24 22 110 5,2

26013230 KT 3D-1ECGB 3,0 296 28 31 150 10,9

26013240 KT 4D-1ECGB 4,4 385 35 40 185 22,0

26013260 KT 6D-1ECGB 6,0 425 42 40 210 29,0

5.6 BLOCK, SINGLE NYLON SHEAVE (KT-TYPE) HOT DIP GALV.

Art. No. Type WLL A B C D weight

5:1 mm mm Mm mm 26014110 KT 1-NECGB 1,0 163 22 16 80 1,7

26014120 KT 2-NECGB 2,0 195 24 22 110 3,2

26014130 KT 3-NECGB 3,0 257 28 31 150 6,2

5.7 BLOCK, STAINLESS, SINGLE SHEAVE (KT-TYPE)

Art. No. Type WLL A B C D weight 5:1 mm mm Mm mm

26016010 KT 1-1ESSC 1,0 163 22 16 80 1,7 26016020 KT 2-1ESSC 2,0 195 24 22 110 3,2



5.8 BLOCK, STAINLESS, DOUBLE SHEAVE (KT-TYPE)

Art. No. Type WLL A B C D weight 5:1 mm mm mm mm

26017110 KT 1D-1ESSC 1,0 187 22 16 80 3,1 26017120 KT 2D-1ESSC 2,0 224 24 22 110 5,2

5.9 BLOCK, TRAWL-BLOCK DESIGN (K-TYPE)

Type WLL A B B1 D E F F1 G J weight

5:1 Mm mm mm mm mm mm mm mm mm

K 500-2A 20,0 785 180 180 500 285 185 345 380 15 230,0

K 600-2A 30,0 910 180 185 600 310 190 380 480 20 360,0

K 650-2A 30,0 975 240 220 650 335 225 415 470 20 500,0

K 800-2A 40,0 1120 240 220 800 340 240 440 600 20 750,0

WITH ROLLER BEARING IN THE SHEAVE AND THR UST BEARING IN THE TOP

0 = BRONZE BEARING IN SHEAVE 1 = BALLBEARING IN SHEAVE 2 = ROLLER BEARING IN SHEAVE E = SWIVEL EYE C = TESTED/CERTIFIED G = GALVANIZED B = BECKET H = HARDENED SHEAVE



5.10 BLOCK, SINGLE SHEAVED “MØLLERODDEN” (B1 AND F1 TYPE)

Art. No. BLOCK CODE

WLL Ton

MAX LOAD ON HEAD-FITTING

WIRE DIA. mm

A B C D E F G WEIGHT Kg

26020041 B1 - 4’’ 1 2 12 110 100 140 55 28 80 100 3,5 26020062 B1 - 6’’ 2 4 10 166 145 185 43 41 130 155 10 26020093 B1 - 9’’ 3 6 14 240 180 235 60 40 195 230 18 26020125 B1 - 12’’ 5 10 18 310 230 285 80 71 250 300 34 26020146 B1 - 14’’ 6 12 20 365 255 300 75 71 290 355 50 26031610 B1 - 16’’ 10 12 24 410 280 340 90 71 340 400 65

BLOCK CODE

WLL Ton


WIRE DIA. mm


F1 - 16’’ 10 20 26 410 320 450 175 85 335 400 105 F1 - 18’’ 10 20 28 480 355 485 190 85 400 470 145 F1 - 20’’ 16 32 32 525 380 510 155 80 445 515 190



5.11 BLOCK, DOUBLE SHEAVED “MØLLERODDEN” (B2 AND F2 TYPE)

BLOCK CODE

WLL Ton


WIRE DIA. mm


B2 - 4’’ 4 4 12 110 110 145 54 28 80 100 7,5 B2 - 6’’ 8 8 10 166 115 185 47 41 130 155 20

BLOCK CODE

WLL Ton


WIRE DIA. mm


F2 - 9’’ 12 12 14 240 180 235 65 46 190 230 38 F2 - 12’’ 20 20 18 310 245 300 80 71 250 300 78 F2 - 14’’ 20 20 20 365 280 330 90 71 290 355 95 F2 - 16’’ 20 20 24 410 300 350 85 71 340 400 125 F2 - 16’’ 40 40 26 420 320 450 152 85 335 400 160 F2 - 18’’ 40 40 28 480 355 485 155 85 400 470 155 F2 - 20’’ 50 50 32 525 380 510 135 80 445 515 230



5.12 BLOCK, SNATCH BLOCK “MØLLERODDEN”

1 - OVAL EYE 2 - STUD EYE

BLOCK DIMENSIONS

Ton Ton Ton mm kg A B C øF øG Fig. A b1 b2 e d e r t K - 42 2 8 4 12 6 105 53 140 80 100 1 80 35 26 40 33 46 33 30

K - 42/5 2 8 4 12 6 105 53 140 80 100 1 SWIVEL HOOK K - 42 S 2 8 4 12 6 105 53 140 80 100 1 SHACKLE 25 40 33 30 K - 62 2 8 4 20 12 155 77 185 100 150 1 80 35 26 40 33 46 33 30 K - 63 3 12 6 20 12 155 77 185 100 150 1 90 44 34 37 42 58 40 40 K - 64 4 16 8 20 12 155 77 185 100 150 1 90 44 34 37 48 65 50 45

K - 64/5 4 16 8 20 15 155 77 185 100 150 1 SWIVEL HOOK K - 64 S 4 16 8 20 15 155 77 185 100 150 1 SHACKLE 32 45 35 40 TK - 64 4 16 8 20 16 155 77 185 100 150 1 90 44 34 37 48 65 50 45 K - 92 2 8 4 22 24 235 118 235 180 230 1 90 44 34 37 33 46 33 30 K - 93 3 12 6 22 24 235 118 235 180 230 1 90 45 30 37 42 58 40 40 K - 95 5 20 10 22 24 235 118 235 180 230 1 105 50 38 55 52 70 50 50 K - 96 6 24 12 22 24 235 118 235 180 230 1 105 50 38 55 52 70 50 50

K - 123 3 12 6 18 38 320 160 290 250 300 2 90 45 34 43 42 58 40 40 K - 125 5 20 10 18 38 320 160 290 250 300 2 105 50 38 27 52 72 50 50 K - 145 5 20 10 20 47 380 190 320 290 355 2 105 50 38 27 52 72 50 50 K - 165 5 20 10 24 55 420 210 350 340 400 2 105 50 30 27 52 72 50 50 K - 168 8 32 16 30 100 420 210 410 335 400 2 150 80 45 110 65 80 60 60 K - 1610 10 40 20 30 100 420 210 410 335 400 2 170 80 55 110 74 90 65 65 K - 2015 15 55 30 32 150 560 265 510 445 515 2 200 90 60 110 58 100 70 80



6. MISC. TOOLS & EQUIPMENT 6.1 BAND-IT ®

ART. NO. ARTICLE 20060010 BAND-IT BAND 3/8" S/S BAND 20060012 BAND-IT BAND 1/2" S/S BAND 20060016 BAND-IT BAND 5/8" S/S BAND 20060019 BAND-IT BAND 3/4" S/S BAND

20061010 BAND-IT 3/8" S/S BUCKLE 20061012 BAND-IT 1/2" S/S BUCKLE 20061016 BAND-IT 5/8" S/S BUCKLE 20061019 BAND-IT 3/4" S/S BUCKLE

20062000 BAND-IT TOOL 6.2 MARLINE SPIKES FOR WIRE, HARDENED STEEL ART. NO. ARTICLE SIZE

27006110 EM 260 CH 260mm 27006112 EM 310 CH 310mm 27006114 EM 350 CH 350mm 27006118 EM 430 CH 430mm 27006120 EM 510 CH 510mm 27006128 EM 700 CH 700mm

6.3 FID, STAINLESS STEEL, FOR SPLICING OF FIBER RO PE ART. NO. ARTICLE SIZE

27006217 EM 170 SS 170mm 27006228 EM 280 SS 280mm 27006230 EM 305 SS 305mm 27006238 EM 385 SS 385mm 6.4 FID FOR SPLICING OF HOLLOW BRAIDED ROPES ART. NO. ROPE

DIA. 27006308 8mm 27006312 12mm 27006314 14mm 27006316 16mm 27006318 18mm 27006320 20mm 27006325 25mm

This design is very suitable for splicing of 12 strand ropes, like our Plexus 12 S Dyneema rope



6.5 FID FOR SPLICING OF HOLLOW BRAIDED ROPES („SELM A“) ART. NO. Art. 27007025 FID, SELMA, 22mm x 460 27007000 COMPLETE SET OF FIDS

6x115mm 7x135mm 9x175mm 12x230mm 15x285mm

6.6 HEAVING LINE WITH BALL (27M) ART. NO. ARTICLE SIZE 27009200 BALL ONLY 3,5" 27009210 COMPLETE LINE 27m

6.7 WIRE-CUTTER ART. NO. ARTICLE SIZE 27011000 HWC-16 0-16mm 6.8 WICTOR INOX POCKET KNIVES ART. NO. ARTICLE 5010802 POCKET KNIFE, RED

(39050) 5011042 RUGGED EDGE (5.0433)

6.9 SHEATH KNIFE WITH BLUE HANDLE (STAINLESS STEEL) "FROST" ART. NO. ARTICLE 5010132 SHEATH KNIFE

STAINLESS (556)

Specially designed for splicing of hollow braided ropes, like our Plexus 12 S Dyneema rope (12 x 1 strand)



6.10 SHEATH KNIFE WITH RED HANDLE "FROST" ART. NO. ARTICLE 5010133 SHEATH KNIFE (521)

6.11 TAPE, “SILVER MILLION” & „DENSO“ ART. NO. ARTICLE 27009031 DENSO TAPE 27009030 “SILVER MILLION” TAPE 50mm x 20 mtr’s 6.12 SHEATH KNIFE W/RUBBER GRIP "ERGO" (STAINLESS S TEEL) ART. NO. ARTICLE 5010455 SHEATH KNIFE

"ERGO" (746) 6.13 MELTING-KNIFE (FOR ROPE) ART. NO. ARTICLE 27024000 MELTING-KNIFE 27024010 SPARE BLADE



6.14 CHINESE FINGER - MISC. TYPES ART. NO. ARTICLE SIZE 27022700 CHINESE FINGER 22-32mm 20992310 OPEN CHINESE

FINGER L=2,3M WLL 2,0t (SF = 5:1)

FOR 5" CABLE

6.15 LINE THROWER, PNEUMATIC GUN LAUNCHER

ART. NO. ARTICLE 27070000 LINE THROWER, PLT LITE, COMPLETE IN HARD CASE

Description:

The PLT®

Mini has been designed as a light tool to establish a line connection and life saving purposes. It is ideal for smaller boats with a need for line establishment up to 90 meters.

The PLT®

Mini can be equipped with different projectiles depending on the use. It can be used either with CO

2 cartridges

or compressed air. Propellant, Air or CO

2:

The Mini can be used either with disposable 32grams CO2

cartridges or compressed air from a high pressure source such as a small cylinder. For professional users, the compressed air option is recommended. Projectiles:

The PLT®

Mini can be equipped with the projectiles shown on the picture. This means that the equipment package can be tailored to fit the users exact needs. Available is also a waterproof, heavy duty suitcase for storing and handling. Technical data: Shooting range is depending on projectile and line, from 50 to 100 meters. The recoil is at the level of a light shotgun.



6.16 SAFETY LANYARD We make Safety Lanyards according to our customers specifications. Our standard stock items are: ART. NO. ARTICLE 20990300 0,50m length with eye & stainless steel Wichard hook 20990355 0,55m length with eye & stainless steel Wichard hook



6.17 CABLE GRIP – “OCTOPUS GRIP”

Art. no Eye dia (D)

Part # Min. cable dia

Max. cable

dia. (mm)

Average br. Strength

(kg)

Working load (kg)

Tail length (L)

[mtr]

Eye size (E)

[mm]

Colour

20992401 11mm AS 5 K 5mm 13 2273 455 1,52 152 20992402 14mm AS 10 K 6mm 19 4545 909 1,83 152 20992403 17mm AS 15 K 10mm 22 6818 1363 2,13 152 20992404 22mm AS 25 K 13mm 25 11364 2273 2,44 203 20992405 25mm AS 40 K 16mm 29 18182 3636 3,05 203 20992406 32mm AS 60 K 22mm 44 27273 5455 6,10 305 20992407 38mm AS 100 K 29mm 76 45455 9091 7,62 406 20992408 44mm AS 120 K 35mm 90 54545 10909 8,53 457 20992409 50mm AS 150 K 40mm 100 68182 13636 10,36 508

Cable Grips

we supply a range of Cable Grips manufactured from Kevlar, Technora or Vectran in

a flat braid form. These grips can be used as permanent or temporary attachment

points on all types of cable or rope, either mid-length or at the ends. The grips are

available in a wide range of sizes and lengths and can be tailored to suit customer’s

particular requirements. The chart details the range of breaking strengths available

as standard. Simply plait the tails in pairs around the cable and attach at the

reinforced eye. Cable Grips are extremely versatile, flexible, reusable and non-

metallic. No specialised tools are required to fit the cable grips.

Please specify umbilical or rope diameter when ordering for the appropriate tail

length to be supplied*. This is especially important in the case of large diameter

umbilicals where tail lengths will be longer than those specified. All Cable Grips are

supplied complete with either a removable galvanised steel thimble or double

reinforced soft eye unless specified otherwise.



7. WIRE – STEEL WIRES 7.1 STEEL WIRE ROPE, STAINLESS AISI 316, 6X36+STEEL CORE (160 KP/MM²)

Art. No. Dim. Weight Construction MBL (mm) Kg/m (kg)

28191010 10 0,409 6x36+IWRC 5700 28191012 12 0,589 6x36+IWRC 8210 28191014 14 0,802 6x36+IWRC 11200 28191016 16 1,047 6x36+IWRC 14600 28191018 18 1,325 6x36+IWRC 18500

20 1,636 6x36+IWRC 22800

7.2 STEEL WIRE ROPE, STAINLESS AISI 316, 6X36+FIBER CORE (160 KP/MM²)


10 0,367 6x36+1FC 5270 12 0,528 6x36+1FC 7600

28190014 14 0,719 6x36+1FC 10300 16 0,940 6x36+1FC 13500 18 1,189 6x36+1FC 17100 20 1,468 6x36+1FC 21100

7.3 STEEL WIRE ROPE, STAINLESS AISI 316, 7X19 (STEE L CORE) (160 KP/MM²)


28170001 3 0,034 7 x 19 520 28170002 4 0,061 7 x 19 930 28170003 5 0,095 7 x 19 1450 28170004 6 0,137 7 x 19 2085 28170010 7 0,187 7 x 19 2840 28170005 8 0,244 7 x 19 3400 28170006 10 0,381 7 x 19 5315 28170008 12 0,549 7 x 19 7650 28170009 14 0,747 7 x 19 10400 28170016 16 0,975 7 x 19 13600



7.4 STEEL WIRE ROPE, GALVANIZED, 6X36+FIBER CORE (180 KP/MM²)


28020081 8 0,237 6x36+1FC 3800 28020082 10 0,371 6x36+1FC 5940 28020083 12 0,534 6x36+1FC 8550 28020084 14 0,727 6x36+1FC 11600 28020085 16 0,948 6x36+1FC 15200 28020086 18 1,200 6x36+1FC 19200 28020088 20 1,480 6x36+1FC 23800 28020089 22 1,790 6x36+1FC 28700 28020090 24 2,140 6x36+1FC 34200 28020091 26 2,510 6x36+1FC 40100 7.5 STEEL WIRE ROPE, GALVANIZED, 35X7 NON ROTATING ( 200 KP/MM²) - Typically used on cranes

Art. No. dim. Construction MBL (mm) (kg)

28030021 8 35 x 7 7600 28030022 9 35 x 7 5550 28030023 10 35 x 7 7410 28030019 11 35 x 7 9200 28030024 12 35 x 7 10700 28030025 13 35 x 7 12500 28030026 14 35 x 7 14980 28030027 16 35 x 7 16600 28030028 18 35 x 7 20900

7.6 SOCKETS -All types available upon request, made by quality manufacturers like Crosby, Van Beest, De Haan etc.

OPEN SOCKETS CLOSED SOCKETS

7.7 SOCKETING MATERIAL / WIRELOCK Art. No. Type 23141000 WIRELOCK 100 cm3 (0,1L) 23142500 WIRELOCK 250 cm3 (0,25 L) 23145000 WIRELOCK 500 cm3 (0,5 L) 23141001 WIRELOCK 1000 cm3 (1 L)



8. ANODES

(ACCORDING TO US. MIL. SPEC.) 8.1 ALUMINIUM ANODES Art. No. type Size (mm) weight Weight L x B x H net

(kg) gross (kg)

A-5 20510100 A-10 210x80x27 0,8 1,0 20510250 A-25 305x102x40 2,1 2,5 20510500 A-50 445x125x40 4,3 5,0 20510800 A-80 640x125x43 7,0 8,0 A-116 800x125x50 10,0 11,6

A-130 890x125x47 11,2 13,0 A-180 1210x125x47 15,5 18,0

A-220 1100x105x85 19,8 22,0

8.2 ZINK ANODES BAR-SHAPED DROP-SHAPED Art. No. type Size (mm) SHAPE Weight

L x B x H gross (kg)

20500200 HZ-2 85x30x13 coned bar

0,2

20500500 HZ-5 100x40x20 coned bar

0,5

20501000 HZ-10 100x60x28 coned bar

1,0

20502000 ZINC 2 150x95x45 drop 2,0 20503000 ZINC 3 230x75x30 bar 3,0 20504000 ZINC 4 210x115x33 drop 4,0 20505000 ZINC 5 300x80x35 bar 5,0 20506000 ZINC 6 300x80x40 bar 6,0 20510000 ZINC 10 290x150x55 drop 10,0 50511000 ZINC 11 280x145x45 bar 11,0



8.3 ZINK SHAFT ANODES

Art. No. type d D weight

mm mm (kg) 20512530 AZ 25 25 50 0,30

20513032 AZ 30 30 55 0,32

20523231 AZ 32 1 1/4" 55 0,31

20513536 AZ 35 35 60 0,36

20523835 AZ 38 1 1/2" 60 0,35

20514057 AZ 40 40 70 0,57

20524545 AZ 45 1 3/4" 70 0,45

20515056 AZ 50 50 80 0,65

AZ 57 2 1/4" 80 0,55

20516077 AZ 60 60 90 0,77

20526370 AZ 63 2 1/2" 90 0,70



9. POLYFORM U.S. BUOYS & FENDERS 9.1 A-SERIES

Art. No. Type Circ. Diam. Length Eye size Buoyancy packed

inc. mm mm mm kg qty. in box. 61100030 A-0 30" 230 290 16 6 20 61100040 A-1 40" 290 370 25 13 10 61100050 A-2 50" 390 490 25 31 10 61100060 A-3 60" 470 590 25 55 10 61100075 A-4 75" 550 710 25 85 10 61100090 A-5 90" 700 920 30 180 5 61100110 A-6 110" 800 1180 38 360 3 9.2 F-SERIES

Art. No. Type Diam. Length Eye size Buoyancy packed

mm mm mm kg qty. in box. 61200115 F-1 150 640 18 8 10 61200222 F-2 220 640 22 13 10 61200322 F-3 220 760 22 20 10 61200422 F-4 220 1040 22 35 5 61200530 F-5 300 760 24 45 5 61200630 F-6 300 1090 24 75 5 61200737 F-7 380 1040 24 95 5 61200837 F-8 380 1470 24 150 4 61201160 F-11 600 1450 27 240 3 61201380 F-13 800 1950 30 600 2

9.3 G-SERIES

Art. No. Type Diam. Length Eye size packed mm mm mm qty. in box.

61210008 G-1 89 330 61210011 G-2 114 406 12,7 12 61210014 G-3 140 508 15,9 6 61210016 G-4 165 584 19,1 6 61210021 G-5 216 686 19,1 4 61210026 G-6 267 762 22,2 4



9.4 HTM-SERIES

Art. No. TYPE Diam. Length tube- packed mm mm size Ø qty. in box.

61220008 HTM-2 203 508 16mm 4 61220010 HTM-3 254 660 16mm 4 61220012 HTM-4 305 864 16mm 4

INFINFLATION GUIDE Product Max Circumferenc

e Product Max Circumferenc

e in. cm in. cm

A - 0 28,5 72,0 CC - 1 34,5 88,0 A - 1 36,0 91,0 CC - 2 44,5 113,0 A - 2 48,5 123,0 CC - 3 58,5 148,0 A - 3 58,5 148,0 CC - 4 68,0 173,0 A - 4 68,0 172,0 CC - 5 86,5 220,0 A - 5 86,5 220,0 CC - 6 106,5 270,0 A - 6 106,5 270,0 CM - 2 44,5 113,0

LD - 2 37,7 96,0 CM - 3 58,5 148,0 LD - 3 45,0 114,0 G - 4 20,4 51,8 F - 1 18,5 47,0 G - 5 26,7 67,8 F - 2 27,0 69,0 G - 6 33,0 83,8 F - 3 27,0 69,0 HTM - 1 18,8 47,8 F - 4 27,0 69,0 HTM - 2 25,1 63,8 F - 5 37,0 94,0 HTM - 3 31,4 79,8 F - 6 37,0 94,0 HTM - 4 38,0 96,5 F - 7 47,0 119,0

F - 8 47,0 119,0 NOTE: When inflating with an

F - 11 74,0 188,0 air compressor. Set the PSI

F - 13 99,0 251,0 to 2 lib. Pressure.



9.5 FENDER HD 265 “HEAVY DUTY”

Art. No. description:

61220450 FENDER HD265 NORDIC ø650x1440mm (GREY)

Specifications: Dia. 650mm Height 1440mm Weight 20 kg Buoyancy 265 kg Dia. eyes. 50mm

“Heavy duty” – Air filled fender for the commercial fleet. It is made in a one step rotation moulding operation, in soft metalocene material, and has reinforced rope eyes. The fender skin thickness is 8mm



9.6 MOB BUOY

Art. No. Description 20000600 COMPLETE MOB BUOY, ASSEMBLED 9.7 MOB BUOY - SPARE PARTS

Art. No. Ref. Description / items A JOTRON BUOY FLASHING LIGHT, TYPE MF 1112

64240006 B BUOY FLAG, FLUORESCENT YELLOW C REFLECTORS / MARKERS

61303060 D POLYFORM BUOY, CC3 64200060 E WEIGTH, 6kg 64231135 F GLASS FIBRE POLE, 1 ¼"

BATTERY LR20, FOR JOTRON LIGHT (3 BATT.) BUOY LIGHT: ACTIVATE BEFORE BUOY IS THROWN OVERBOARD. THE FLASHING LIGHT ACTIVATES BY DAYLIGHT CENSOR. THE FLASHING LIGHT HAS A LIFETIME OF APPROXIMATELY 75 HOURS. BATTERIES AND THE LIGHT FUNCTION MUST BE CHECKED IN REGULAR INTERVALS.



10. CABLE WINDER & CABLE LIFTING EQUIPMENT

10.1 REEL / DRUM WINDER FOR CABLES & UMBILICALS

Art. No. Description 202105000 WINDER FOR CABLE REELS & DRUMS Lifting capacity on jacks: 5000 kg Pulling force on flange: approx. 200kg Delivered in painted or hot dip galvanized finish.



10.2 SPREADER, ADJUSTABLE, FOR LIFTING OF REELS

Art. No. Description 23240050 SPREADER, ADJUSTABLE, CERTIFIED FOR 5 TON LIFTING



10.3 REEL / DRUM ROLLER, ADJUSTABLE, WITH BEARINGS

Art. No. Description

23240060 REEL ROLLER SET (2 UNITS) (EWR-1140/130) 3000kg



11. FIBER LIFTING AND LASHING EQUIPMENT

11.1 LASHING, POLYESTER WEBBING, WITH WINCH (COMPLE TE)

Art. No. Description: WLL TON

(sf 7:1) Length

27052100 FIBER LASHING 10 10m (0,5m + 9,5m) 27052025 FIBER LASHING 2,5 6m (0,5m + 5,5m) 27052040 FIBER LASHING 5 10m (0,5m + 9,5m) 27052010 FIBER LASHING 1 5,5m (0,5m + 5m)

11.2 LASHING, POLYESTER WEBBING, WITH STAINLESS WIN CH (COMPLETE)

Art. No. Description: WLL TON (sf 7:1)

Length

27052050 FIBER LASHING SS 4 10m (0,5m + 9,5m) 11.3 LIFTING SLING, POLYESTER WEBBING, WITH EYES

Art. No. Description:

WLL [ton] sf 7:1

Webb. width [mm]

Length [m]

27053612 LIFTING SLING, POLYESTER WEB. 5 150 12 27053610 LIFTING SLING, POLYESTER WEB. 5 150 10 27053608 LIFTING SLING, POLYESTER WEB. 5 150 8 27053606 LIFTING SLING, POLYESTER WEB. 5 150 6 27053605 LIFTING SLING, POLYESTER WEB. 5 150 5 27053604 LIFTING SLING, POLYESTER WEB. 5 150 4 27053603 LIFTING SLING, POLYESTER WEB. 5 150 3 27053602 LIFTING SLING, POLYESTER WEB. 5 150 2 27053512 LIFTING SLING, POLYESTER WEB. 3 90 12 27053510 LIFTING SLING, POLYESTER WEB. 3 90 10 27053508 LIFTING SLING, POLYESTER WEB. 3 90 8 27053506 LIFTING SLING, POLYESTER WEB. 3 90 6 27053505 LIFTING SLING, POLYESTER WEB. 3 90 5 27053504 LIFTING SLING, POLYESTER WEB. 3 90 4 27053503 LIFTING SLING, POLYESTER WEB. 3 90 3 27053502 LIFTING SLING, POLYESTER WEB. 3 90 2 27053501 LIFTING SLING, POLYESTER WEB. 3 90 1 27053312 LIFTING SLING, POLYESTER WEB. 2 60 12 27053310 LIFTING SLING, POLYESTER WEB. 2 60 10 27053308 LIFTING SLING, POLYESTER WEB. 2 60 8 27053306 LIFTING SLING, POLYESTER WEB. 2 60 6 27053305 LIFTING SLING, POLYESTER WEB. 2 60 5 27053304 LIFTING SLING, POLYESTER WEB. 2 60 4 27053303 LIFTING SLING, POLYESTER WEB. 2 60 3 27053302 LIFTING SLING, POLYESTER WEB. 2 6 2 27053301 LIFTING SLING, POLYESTER WEB. 2 60 1

27053112 LIFTING SLING, POLYESTER WEB. 1 50 12 27053110 LIFTING SLING, POLYESTER WEB. 1 50 10 27053108 LIFTING SLING, POLYESTER WEB. 1 50 8 27053106 LIFTING SLING, POLYESTER WEB. 1 50 6 27053105 LIFTING SLING, POLYESTER WEB. 1 50 5 27053104 LIFTING SLING, POLYESTER WEB. 1 50 4 27053103 LIFTING SLING, POLYESTER WEB. 1 50 3 27053102 LIFTING SLING, POLYESTER WEB. 1 50 2 27053101 LIFTING SLING, POLYESTER WEB. 1 50 1

OTHER SIZES AND HIGHER WLL

RATINGS AVAILABLE ON

REQUEST.



11.4 LIFTING SLING, ENDLESS/CIRCULAR, POLYESTER FIB ER,

Art. No. Description: WLL [ton]

Eff. Length [m]

27066105 ROUND SLING, POLYESTER FIBER 1 0,5


27066110 ROUND SLING, POLYESTER FIBER 1 1

















































OTHER SIZES AND HIGHER WLL

RATINGS AVAILABLE ON

REQUEST.



12. TROLLEY & CHAIN HOISTS 12.1 TROLLEY, SVERO

SVERO TROLLEY MODEL 20 (TYPE A ): WLL 0,5 TON AND 1,0 TON, ADJUSTABLE:

SVERO TROLLEY MODEL 20 (TYPE B ): WLL 2,0 TO 5,0 TON, ADJUSTABLE :

Art. No. WIL Ton

Type. A min-max

B C ØD E F G H ØJ ØK L M P Min curve radius m

Weight kg

20080500 0,5 20123 46-160 208 18 62 77 18 45 33 25 19 216 100 22 1,0 6,0 20080501 0,5 20124 161-280 A+48 18 62 77 18 45 33 25 19 216 100 22 1,0 6,4 20081000 1 20143 50-160 212 20 70 85 20 51 40 32 24 264 130 24 1,25 9,4 20081001 1 20144 161-280 A+52 20 70 85 20 51 40 32 24 264 130 24 1,25 10,7 20082000 2 20163 64-180 248 24 100 118 24 63 51 40 32 335 165 31 1,8 17,9 20082001 2 20164 181-300 A+68 24 100 118 24 63 51 40 32 335 165 31 1,8 20,1 20083000 3 20173 74-180 262 28 114 137 30 78 57 46 35 380 180 37 2,2 31,2 20083001 3 20174 181-300 A+88 28 114 137 30 78 57 46 35 380 180 37 2,2 33,7 20085000 5 20193 82-180 270 34 140 165 32 92 64 56 42 437 215 41 2,5 48,7 20085001 5 20194 181-300 A+90 34 140 165 32 92 64 56 42 437 215 41 2,5 51,7



12.2 TROLLEY, YALE Model Art. No. max size beam width min. radius weight (kg)

Load (mm) beam curve with lock without lock

Art. No. Description Type WLL [kg] 20095000 YALE TROLLEY 5000 HTP-A HTP-A 5000 20093000 YALE TROLLEY 3000 HTP-A HTP-A 3000 20092000 YALE TROLLEY 2000 HTP-A HTP-A 2000 20091000 YALE TROLLEY 1000 HTP-A HTP-A 1000 20090500 YALE TROLLEY 500 HTP-A HTP-A 5000



12.3 CHAIN HOIST, KITO

Art. No. Description Type WLL [kg]

12.4 CHAIN HOIST, NITCHI



13. SAFETY EQUIPMENT 13.1 FALL ARRESTER “SALA - TALON”

The new generation of super-light fall arrester with 3m web line.

Weighs only 0,98 kg

The fall arrester may be attached directly to the harness D-ring,

and also fitted with removable hook designed for attachment to

scaffoldings etc.

13.2 FALL ARRESTER “SALA – MINI FALL ARRESTER”

This fall arrester is equipped with a practical rolling-web with integrated

fall absorption function. Delivered with a soft eye in order to fit a hook

Or other desired termination. Normally the hook for scaffoldings are

Preferred (scaff 2)

13.3 FALL ARRESTER “SALA” The original Sala fall arrester. aluminium casted housing with stainless

steel wire, suitable for harsh and demanding environments.

Max load 136 kg


20200010 Talon fall arrester R-Talon/Scaff 2


20200020 Sala mini fall arrester 2,5m webbing P-6AR


20200157 SB 57 SS with 6 mtr’s ss wire

20200150 SB 150 SS with 12 mtr’s ss wire



13.4 FALL ARRESTER - HARNESS The quickest and easiest harness to get on and off. The harness is constructed

according to the X-principle for simple spread of all the web-band and optimum weight distribution. All web-bands are fitted with “snap locks”. The harness is lined with Dri-Lex

in order for the harness not to be experienced as moist/damp while wearing it.

All load exposed areas are well upholstered for optimum comfort. The EXO fit is

Fitted with connection points on the back and on the chest. This is a simple to use, and comfortable to wear harness, and is highly recommended.

13.5 HELMET/HARD HAT Iris 2 combined safety helmet and eye protection.

The goggles have optical class 1.


20201010

EXO-fit harness with D-ring on back & chest and with quick connecting buckles. N-EXO/LGE

20201020

EXO-fit harness with D-ring on back & chest + supporting belt, and with quick connecting buckles. N-EXO/LGE/WB


20202000 IRIS 2 Safety helmet with incorporated visor



13.6 SHOES/BOOTS “STEEL TOE” BATA NATURAL TAHO ANTI SKID SOLE, LIGHT WEIGHT Full grain leather/abrasion resistant TPU toecap Fur lining or no lining TriTech Plus®-sole Width XW Mondopoint size range: 240-315 UK size range: 5-13 (including 6.5 and 9.5)


20203000 Bata Natural Taho 2 (black) Fur lining

20203010 Bata Natural Tewa 3 (brown) No lining



13.7 GLASSES, PROTECTION METALIKS SPORT ALLERGY TESTED, ADJUSTABLE NOSEPIECE AND SIDE BARS HIGH COMFORT. EXCELLENT EYE COVER AND OPTIMAL FIELD OF VIEW VIRTUA EXTREME LOW WEIGHT - 24GR WELL SUITED FOR USE WITH EAR PROTECTION AND HELMET


20204000 Metaliks Sport - clear

20204010 Metaliks Sport – blue

20204020 Virtua – clear

20204030 Virtua - gray



13.8 FALL PROTECTION “CABLOC”

The CABLOC device by Protecta is for guided-type fall arrest systems designed for vertical use only. The CABLOC device travels on a 5/16" (8mm) cable that is affixed to the ladder or pole utilizing an upper and lower bracket. It offers complete hands-free operation, and will arrest a fall within 2 feet. Complies with current OSHA standards for fall arrestors and current ANSI standards for vertical lifelines.

Mørenot - Offshore Catalogue 2008

Documents

Transcript of Mørenot - Offshore Catalogue 2008