Category: Monopoints are an excellent alternative or complement to Duplex Cable, Retrac and Centro Trac Systems. They allow the use of individual Spotlights for accent illumination. They are extremely low profile, small in scale and feature elegant, highly engineered aesthetics. (Note: Photo at left shows a Monopoint with a Claro Spotlight to demonstrate installation example. Claro is not included with the Monopoint; specify desired Spotlight separately.) Monopoints: Monopoint Surface - Integral Transformer (MPS-IT), Monopoint Surface - Integral Driver (MPS-ID), Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP), Monopoint Recessed Trimless - Remote Power Supply (MPRTL-RP), Monopoint Panel Mount - Remote Power Supply (MPPM-RP), Pico 1 Surface Mount Monopoint with remote driver - Integral Spotlight (Pico 1 - S), Single Monopoint - Recessed Enclosure - 12W - Integral Driver (MP-1-RE-12-ID), Single Monopoint - Recessed Enclosure - 35W - Integral Driver (MP-1-RE-35-ID), Double Monopoint - Recessed Enclosure - 12W - Intergral Driver (MP-2-RE-12-ID), Double Monopoint - Recessed Enclosure - 35W - Integral Driver (MP-2-RE- 35-ID), Single Monopoint - Recessed Enclosure - 30W - Integral Transformer (MP-1-RE-30-IT), Single Monopoint - Recessed Enclosure - 108W - Integral Transformer (MP-1-RE-108-IT), Double Monopoint - Recessed Enclosure - 108W - Integral Transformer (MP-2-RE-108-IT).

Material: Extruded and machined aluminum; Spots and Pendant Series. Refer to Pendant Spec Sheet for Shade Material. Aluminum and steel Recessed Housing/Monopoint.

Finish: Brushed Aluminum (AL), White (WH), Black (BLK). Refer to Trac and Monopoints Bronze specsheet or the Claro/Monopoints Brass specsheet for Oil-Rubbed Bronze or Brushed Brass finish information.

Source: Dedicated LED, Halogen or LED MR-16. Refer to linked Spotlight Specification sheets below or details. Contact factory to order MR-16 LED lamps. Halogen Lamps by others.

Power Supply: Refer to Spec Sheet 13 for Power Supply options (or p. 6 of this specsheet for Recessed Enclosure Monopoints). NOTE: For dimming LED MR-16 lamps (Soraa) with electronic transformers, please refer to page 3 of our MR-16 LED Specsheet.

Spotlights: Evo, Pico 1, Pico 3, Claro, Argent, Oculus, Arte-MR-16, Arte-AR-111/PAR-36, Tiro-SGS, Tiro- FGS, Mini-Kore Pendants.

Installation: Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link. Non-IC rated.

Accessories: Monopoint Decorative Cover (MPDC), Monopoint Plug (MP), 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72), Universal Sloped Ceiling Adapter (USCA). Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. Non-IC rated. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifi- cations or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

Monopoints

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 1

IP LED HALOGEN

System

12VAC

24VDC MR-16 LED AR 111 LED PAR-36 LED

Monopoints

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 2

System

Tegan Monopoint1,2 Finish3 Accessories2

TG

ALWHBLK8

Example: TG - MPS - IT - AL - 120V - MP

MPS - ITMPS - IDMPRFP - RPMPRTL - RPMPPM - RPPICO1 - S6.8

MP-1-RE-12-IDMP-1-RE-35-IDMP-2-RE-12-IDMP-2-RE-35-IDMP-1-RE-30-ITMP-1-RE-108-ITMP-2-RE-108-IT

MPDC4

MP5

SpotExt727

DSpotExt727

USCA-AL7

_ _ _

Notes:1 Spotlight and Power Supply are specified separately (except Pico 1-S Spotlight and M-1/2-RE, Power Supply is included - order Spotlight separately). Refer to linked Specification Sheets above for more detail.2 Select one. 3 Some Monopoints also available in Oil-Rubbed Bronze (BRZ) or Brushed Brass. Refer to Trac and Monopoints Bronze specsheet or the Claro/Monopoints Brass specsheet for Oil- Rubbed Bronze or Brushed Brass or finish information.4 For use with the Recessed Trimless Remote Power Supply (MRTL-RP) only.5 For use with all Monopoints except Pico 1-S.6 Integral Spotlight.7 See “Monopoint - Accessories” on p. 5 for optional Spot Extension details.8 For Pico 1-S, contact factory for Anodized Black (BLK) finish.9 Voltage applies to Recessed Monopoint only. Refer to chart on page 6 for details. For MPS-ID/IT refer to Power Supply Spec Sheet for details. Leave blank for all others.10 Note: Tegan’s Mini-Kore LED Pendants cannot be installed with a Monopoint on a sloped ceiling. Contact factory for a sloped ceiling solution for a Monopoint.

Monopoint - Components

CLICK

TWIST

The Twist & Click system allows the Spotlights to be easily removed. The Spotlights click into the jack plug socket, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or can be secured using two locking pins.

Twist & Click System

65

ø18.5

ø37.5

ø37.5mm(1 -1/2”)

65mm(2 -1/2”)

ø18.5mm(3/4”)

Pico 1 - S

The Pico 1 - S LED Mini Spotlight features a discreet 1W LED integrated sur-face monopoint and utilizes an remote 350ma output driver that accepts 120VAC. Pico LED is lockable in pan & tilt and incorportates an integral heat sink for optimized cooling of the LED. Interchangeable optics can be field adjustable 12º and 30º. Pico 1 - S is a stand alone surface mount monopoint for individual spotlight applications, not for use with other Tegan Systems.Brushed Aluminum (AL) finish; contact factory for Anodized Black (BLK).

Voltage9

_

120V277V

_Spot/Pendant10

Order Separately

SystemMonopoints

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 3

The Recessed Flat Plate Monopoint features the Twist & Click System to accept a wide variety of Spotlights and Mini-Kore Pendants. (Shown with Claro Spotlight, not included with Monopoint; specify desired Spotlight separately.) Electrical Rat-ing: 50W (max) at 12VAC. Cut out hole: ø25mm/.98”. Minimum Ceiling Height: 45mm/1.77”. Plastering up to the Twist & Click opening leaves a 19mm/.75” hole that can be concealed with an optional Monopoint Plug (MP) when not in use. Accessories: Monopoint Plug – 19mm/.75” (MP), Spot Extension (SpotExt-72), Double Spot Extension (DSpotExt-72). Universal Sloped Ceiling Adapter (USCA). Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instructions for details.

Recessed Flat Plate - Remote Power Supply (MPRFP - RP) 20

5

ø60

ø62

Power

20mm(13/16”)

20

5

ø60

ø62

Power

20

5

ø60

ø62

Power

ø60mm(2 -3/8”)

ø62mm(2 -7/16”)

5mm(1/4”)

Ceiling

Monopoint - Components (cont’d)

The Trimless Monopoint features the Twist & Click System for a wide variety of Spotlights and Mioni-Kore Pendants. (Shown with Claro Spotlight, not included with Monopoint; specify desired Spotlight separately.) Electrical Rating: 50W (max) at 12VAC. Cut out hole: ø45mm/1.77”. Minimum Ceiling Height: 55mm/2.17”. Maximum Ceiling Thickness: 40mm/1.58”. Plastering up to the Twist & Click opening leaves a 19mm/.75” hole that can be concealed with the Monopoint Plug (MP) when not in use. Supplied Monopoint Cover can be used when the Trimless Monopoint cannot be plastered in. Accessories: Mo-nopoint Decorative Cover 62mm/2.44” (MPDC), Spot Extension (SpotExt-72), Double Spot Extension (DSpotExt-72), Universal Sloped Ceiling Adapter (USCA). Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish (Plug only; once installed the housing will not show). Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instructions for details.

50mm(2”)

ø60mm(2 -3/8”)

The Panel Mount Monopoint features the Twist & Click System for a wide variety of Spotlights and Mini-Kore Pendants. This Monopoint is the smallest in scale and is designed primarily for displays, casework and exhibitions. It can be fixed through panels up to 1.8” (45mm) thick. (Shown with Claro Spotlight, not included with Monopoint; specify desired Spotlight separately.) Electrical Rating: at 50W (max) at 12AC. Cut out hole: ø25mm/.98”. Minimum Ceiling Height: 45mm/1.77”. Maximum Material Thickness: 30mm/1.2”. Accessories: Monopoint Plug – 19mm/.75” (MP), Spot Extension (SpotExt-72), Double Spot Extension (DSpotExt-72), Universal Sloped Ceiling Adapter (USCA). Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instruc-tions for details.

Recessed Trimless - Remote Power Supply (MPRTL - RP)

Panel Mount - Remote Power Supply (MPPM - RP)

50

ø60ø35mm(1 -1/4”)

50

ø60

CeilingPlaster

ø33

36

Ceiling

5mm(1/4”)

ø35mm(1 -3/8”)

CAP

44mm(1 1/2”)

Monopoints

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 4

System

Monopoint - Components (cont’d)

The Surface Monopoint features an Integral Transformer (IT) with the Twist & Click System to accept a wide variety of LED/Halogen MR-16 Spotlights. Electrical Rating: 60W (max) at 12VAC. Available in Brushed Aluminum (AL), White (WH), Black (BLK), Metallic Bronze Powdercoat (BRZ) finish. Compati-ble with all Halogen/LED** Spotlights. Refer to Power Supply Specsheet 13 for details.

Surface Monopoint - Integral Transformer (MPS - IT)

8cm

(3 -1/8”)

ø12.7cm(5”)

8cm

(3 -1/8”)

ø12.7cm(5”)

The Surface Monopoint features an Integral Driver (ID) with the Twist & Click System to accept a wide variety of Dedicated LED Spotlights and Mini-Kore Pendants. Electrical Rating: 25W (max), non-dimming, at 24VDC. Available in Brushed Aluminum (AL), White (WH), Black (BLK), Metallic Bronze Powder-coat (BRZ). Compatible with all Dedicated LED** Spotlights (except Pico 1-S) and Mini-Kore Pendants. Refer to Power Supply Specsheet 13 for details. Contact factory for dimming options.

Surface Monopoint - Integral Driver (MPS - ID)

* Halogen/LED Spotlights utilize MR-16 LED Lamps (by others) and are used with 12VAC low voltage transformers. LED Spotlights are dedicated

LED’s and are used with 24VDC drivers. Refer to MR-16 LED Specsheet for more information.

The Single Monopoint with Recessed Enclosure features an Integral Trans-former (IT) or Integral Driver (ID) with the Twist & Click System to accept a wide variety of LED/Halogen MR-16 or dedicated LED Spotlights and Mini-Kore Pendants (ID only). Electrical Rating: 108W (max) at 12VAC for integral transformer (IT) or 35W (max) for 24VDC for integral driver (ID). Non-IC rated. Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish. Compatible with most MR-16 Halogen/LED* Spotlights and Mini-Kore Pendants. Refer to chart on page 6 for details. Accessories: Monopoint Plug – 19mm/.75” (MP), 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72), Universal Sloped Ceiling Adapter (USCA). Refer to Installation Instructions for details. Ordered separately. (Photo shows a Monopoint with a Pico 3 Spotlight to demonstrate installation example. Pico 3 is not included with the Monopoint; specify desired Spotlight separately.)

The Double Monopoint with Recessed Enclosure features an Integral Trans-former (IT) or Integral Driver (ID) with the Twist & Click System to accept a wide variety of LED/Halogen MR-16 or dedicated LED Spotlights and Mini-Kore Pendants (ID only). Electrical Rating: 108W (max) at 12VAC for Integral Transformer (IT) or 35W (max) for 24VDC for Integral Driver (ID). Non-IC rated. Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish. Compatible with most MR-16 Halogen/LED* Spotlights and Mini-Kore Pendants. Refer to chart on page 6 for details. Accessory: Monopoint Plug – 19mm/.75” (MP), 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72), Universal Sloped Ceiling Adapter (USCA). Refer to Installation Instructions for details. Ordered separately. (Photo shows a Monopoint with a Pico 3 Spotlight to demonstrate installation example. Pico 3 is not included with the Monopoint; specify desired Spotlight separately.)

ø 57mm(2 -1/4”)

87mm(3 -7/16”)

187mm(7 -3/8”)

ø 57mm(2 -1/4”)

87mm(3 -7/16”)

187mm(7 -3/8”)

ø 57mm(2 -1/4”)

Single Monopoint - Recessed Enclosure - Integral Power Supply (MP-1-RE-IT/ID)

Double Monopoint - Recessed Enclosure - Integral Power Supply (MP-2-RE-IT/ID)

Perspective View Bottom View Perspective View Bottom View

83mm(3 -1/4”)

Installed View Installed View

Monopoints System

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 5

The Universal Sloped Ceiling Adapter allows for angle adjustment of any Spotlight when connected to a Monopoint installed on a sloped ceiling. Tilts 90º and rotates 350º. Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order.

Universal Sloped Ceiling Adapter (USCA-AL)

ø16mm(5/8”)

57mm(2 -1/4”)

Field cuttable Connector Spot Extension will attach to any system to extend the Spot 72” from the Monopoint. Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72-AL)

1.8m(72”)

72” Double Spot Extension for mounting and extending two Spotlights from the Monopoint. Available in Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order. Can be cut to shorter lengths at the factory.

72” Double Spot Extension (DSpotExt72)

81mm(3 -3/16’)

ø24mm(15/16”)

1.8m(72”)

ø62

5

ø19

6

ø62

5

The Monopoint Decorative Cover can be used with the MRTL-RP when it cannot be plastered properly. Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish.

ø62

5

ø19

6

ø62

5

ø19mm(3/4”)

Monopoint Decorative Cover(MPDC)

Monopoint Plug (MP)

6mm(1/4”)

5mm(3/16”)

ø62mm(2 -7/16”)

Monopoint - Accessories

The Monopoint Plug can be used with any Monopoint (except Pico 1-S, MPS - IT and MPS - ID) when not in use, to cover the Twist & Click System. Keeps the connection clean during rough construction phase. Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet for Oil Rubbed Bronze (BRZ) finish.

Monopoints

Monopoint Type Description Catalog # Watts1 Min / Max3 Typical Driver Links Compatible Spots/Pendants

MP-1-RE-12-ID, MP-2-RE-12-ID 12W-LED-24VDC-120/277V D-12W-120/277V 12W 0/12 Thomas-LED12W-24 1 or 2- Pico 3

MP-1-RE-35-ID 35W-LED-24VDC-120/277V D-35W-120/277V 35W 0/35 Roal-Tran-RSLP035 1- Oculus, Mini-Kore Pendant

MP-2-RE-35-ID 35W-LED-24VDC-120/277V D-35W-120/277V 35W 0/35 Roal-Tran-RSLP035 2- Oculus

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 6

Monopoint Type Description Catalog # Watts1 Min / Max3 Typical Transformer Links

Compatible Spots/Pendants

MP-1-RE-30-IT 30W-12VAC-120V T-E-30W-120V 30W 1/24 Hatch-RS12-30M

1- Claro, Evo, Argent, Arte-MR16, Tiro Spots with 20W (max each) LED/HAL MR-16 Lamp.

MP-1-RE-108-IT 108W-12VAC-120V T-E-108W-120V 108W 5/86 Hatch-RS12-108-120V

1 - Claro, Evo, Argent, Arte-MR16, Tiro Spots with 35W (max each) LED/HAL MR-16 Lamps or Arte-AR111 with 18.5W (max) AR-111 Lamp or 2 - Arte-AR111’s with 12.5W (max) lamps.

MP-1-RE-108-IT 108W-12VAC-277V T-E-108W-277V 108W 5/86 Hatch-RS12-108-277V

1 - Claro, Evo, Argent, Arte-MR16, Tiro Spots with 50W (max each) LED/HAL MR-16 Lamps or Arte-AR111 with 18.5W (max) AR-111 Lamp or 2 - Arte-AR111’s with 12.5W (max) lamps.

MP-2-RE-108-IT 108W-12VAC-120V T-E-108W-120V 108W 5/86 Hatch-RS12-108-120

2- Claro, Evo, Argent, Arte-MR16, Tiro Spots with 35W (max each) LED/HAL MR-16 Lamps or 2 - Arte- AR111’s with 12.5W (max each) AR-111 lamps.

MP-2-RE-108-IT 108W-12VAC-277V T-E-108W-277V 108W 5/86 Hatch-RS12-108-277

2- Claro, Evo, Argent, Arte-MR16, Tiro Spots with 35W (max each) LED/HAL MR-16 Lamps or 2 - Arte-AR111’s with 12.5W (max each) AR-111 Lamps

24VDC Power Supplies for Single/Double Monopoint with Recessed Enclosure (only) - LED Drivers1,2,3,4,5

12VAC Power Supplies for Single/Double Monopoint with Recessed Enclosure (only) - Transformers for MR-16 Lamps2

Notes1 Due to the rapidly evolving technology for Semiconductor products, Tegan driver options are subject to change at any time, without notice. In addition, if any of the standard drivers are out of stock or discontinued, Tegan Lighting will supply an equal as needed. Tegan can also supply alternative drivers upon request; contact the factory for details. 2 Minimum and maximum wattage information provided by the driver manufacturer, refer to linked driver specification sheets for more detail and verification. Subject to change.3 Tegan LED emitters, like all LEDs, undergo a natural depreciation in lumen output. This depreciation is within the specifications of LM-80. Extreme ambient temperatures, dusty environments, and power conditions may affect the depreciation. Wattage requirements and lumen output are subject to change with ongoing developments in LED technology. 4 Contact factory for Pico 1 driver options.5 Contact factory for DM options.

Monopoints System

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 7

ARGENT

ArgentClaro

HALOGEN/MR-16 LED

HALOGEN/MR-16 LED

CLARO ARTE - MR-16

Arte - MR-16

HALOGEN/MR-16 LED

* Note: Spotlights shown are not compatible for use with the Pico 1 - S Monopoint.

EVO - LGS

Evo - Long Glare Shield

EVO - SGS

Evo - Short Glare Shield

HALOGEN/MR-16 LED

HALOGEN/MR-16 LED

Evo - AGS

Evo - Angled Glare Shield

HALOGEN/MR-16 LED

OCULUS - SGS

Oculus - Short Glare Shield

LED LED

Oculus - Long Glare Shield

OLGS

Monopoint - Spotlights

PICO - 1

Pico - 1

LEDPICO - 3

Pico - 3

LED

Monopoints System

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG11 3/3/17 8

Monopoint - Pendants

MINI-KORE PENDANT

Mini-Kore Pendant/Seine Shade

* Note: Spotlights and Mini-Kore Pendants shown are not compatible for use with the Pico 1 - S Monopoint.

* Note: Mini-Kore Pendants cannot be installed with a Monopoint on a sloped ceiling. Contact factory for a sloped ceiling solution for a Monopoint.

Mini-Kore Pendant/Tulle ShadeMini-Kore Pendant/Benton Shade

MINI-KORE PENDANT MINI-KORE PENDANT

Mini-Kore Pendant/Labyrinth ShadeMini-Kore Pendant/Vidro ShadeMini-Kore Pendant/Karton Shade

MINI-KORE PENDANT MINI-KORE PENDANT MINI-KORE PENDANT

Mini-Kore Pendant/Knitted ShadeMini-Kore Pendant/Cylinder Gem/No ShadeMini-Kore Pendant/Candelabra Gem/No Shade

MINI-KORE PENDANT MINI-KORE PENDANT MINI-KORE PENDANT

Monopoint - Spotlights (cont’d)

ARTE - AR-111/PAR-36 AR-111 or PAR-36 LED

TIRO - SGS TIRO - FGSHALOGEN/MR-16 LED

HALOGEN/MR-16 LED

Arte - AR-111/PAR-36 Tiro - Short Glare Shield Tiro - Frit Glass Shield