Mold In Graphic Systems Catalogue.pdf

7/30/2019 Mold In Graphic Systems Catalogue.pdf

1/7

1/7 Mold In Graphics Catalogue27.08.2012

Rotolink Oy Tel: +35844 0800 865 VAT: FI19836190Lekatie 4 E-mail: [email protected] Alv Rek34800 Virrat IBAN: FI45 5524 0320 0401 79 OP Virrat:552403-240179www.rotolink.fi Y-Tunnus: 1983619-0

Applicator RollerROLL-4- for MIGS -graphic assembly

Applicator Teflon 3 x 4APPL-47,6 cm x 10,2 cm- for MIGS -graphic assembly

Applicator Teflon 3 x 6APPL-6

7,6 cm x 15,2 cm- for MIGS -graphic assembly


2/7



Burnishing Pad - 2 Small -MicrobeadSCBP-MB 5 cm- for MIGS -graphic assembly

Burnishing Pad 2 SmallSCBP

5 cm- for MIGS -graphic assembly

Burnishing Pad 4 LargeLCBP 10 cm- for MIGS -graphic assembly

Burnishing Pad 2.875 x 4.25 LargeRectangularLRBP7,3 cm x 10, 8 cm- for MIGS graphic assembly


3/7



Abrasion CoatingAISAC-12 12 bottlesAISAC-1 1 bottlegross weight 408 g / net weight 320 g- transparent protective cover forMIGS -graphic

MIGSTM AdhesiveAISA-12 12 bottlesAISA-1 1 bottlegross weight 408 g / net weight 312 g- graphic glue for mould surface

MOGSTM AdhesiveAOSA-12 12 bottlesAOSA-1 1 bottlegross weight 408 g / net weight 312 g

- graphic glue for plastic surface


4/7



AntiSkidAOSSK-12 12 bottlesAOSSK-1 1 bottlegross weight 408 g / net weight 312 g- adhesive for coating(sand, etc.)

MIGSTM

Color On SystemsTM

Clear CoatAOSCC-12 12 bottlesAOSCC-1 1 bottlegross weight 408 g / net weight 312 g- spray-colour for product(plastic surface)

MIGSTM Color In SystemsTM AerosolAIS Color-12 12 bottlesAIS Color-1 1 bottle-white -12-black -12-red 186C -12-green 349C -12-yellow 109C -12

-orange 166C -12-blue 300C -12-brown 497C -12gross weight 408 g / net weight 312 g- spray-colour for mould surface


5/7



Mold Release RemoverMRR-12 12 bottlesMRR-1 1 bottlegross weight 544 g / net weight 425 g- cleanser for mould- used before graphic assembly

PL-S Parting Line SealerTMPLS-Natural-12 12 tubesPLS-Natural-1 1 tubegross weight 312 g / net weight 284 g- for one time parting line repairs

Patch N GoCanPNG-4 4 cansPNG-1 1 cangross weight 181 g / net weight 141 g

- for bubble and pin hole repairs


6/7



Patch N GoTubePNG-20T 20 tubesPNG-1T 1 tubegross weight 35 g- for bubble and pin hole repairs

Surface EnhancerTMGelBIGE-4 4 boxesBIGE-1 1 boxgross weight 146 g / net weight 100 g

Surface EnhancerTMSprayAISE-12 12 bottlesAISE-1 1 bottlegross weight 408 g / net weight 312 g


7/7



Power Burnisher- for MIGS graphic assembly- fast and simple to use

Mold In Graphic Systems Catalogue.pdf

Documents

Transcript of Mold In Graphic Systems Catalogue.pdf