Modules Tools Applications En
Transcript of Modules Tools Applications En
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 1/8
Your rst choice in digital cutting.
Modules, tools, and applicationsG3 S3 Digital Cutter
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 2/8
S3
G3 S3
G3 S3
G3 S3
The right modulesfor every application
Kiss-Cut ModuleThe main features of the Kiss-Cut Module (KCM-S) are low weight and minimal stroke, guaranteeing maximum processingspeeds. In addition, this module excels in ease of use, quick tool changes, and high precision.Depending on the application, you have the option to choose between two processing modes:In pressure mode, the module exerts constant, user-de nable pressure (between 30 and 1600 grams) on the substrate.The top layer of pressure-sensitive materials is cut cleanly and accurately, without damage to the liner. In position mode,the tool through-cuts the material to a set depth.The Kiss-Cut Module accommodates the universal cut ting tool (CT), a cutting tool with integrated, height-adjustable glideshoe (ST), and a drawing/plotting tool (DT).
The Universal Module (UM, UM-S) accommodates a wide range of tools for many different func tions. High processingspeeds, stability, and proven technology distinguish the Universal Module (UM) for G3 as well as the Universal Module-S(UM-S) for the S3 line of cutters. The Universal Module makes adapting the Zünd cutting system easy and cost-effectivewhenever needs change. Switching from one application to another happens in a few simple steps.
A bayonet lock allows for quick tool changes. The module can operate in either pressure or position mode. A glide disk isavailable for both the UM and the UM-S; this option facilitates process ing wavy materials.
Universal Module
Punch ModuleThe Punching Module (PUM/PUM-S) makes it possible to ef ciently and reliably punch symmetrical (round) holes in avariety of materials, e.g. leather, rubber, and synthetic materials. Two punches accommodate tools in different sizes (fromØ 0.5 mm to 5.5 mm) and grades of steel (HSS or carbide). Also integrated is a marking module for drawing and marking.
For reliable, high-quality results, the punch ac tion of the tool is immediately followed by a tool rotation, The waste materialfrom the holes is sucked into a container located at the back of the module. The waste container can easily be removed
for emptying.
Marking ModuleThe Marking Module (MAM) accommodates various pens and drawing implements. Typical applications include plottingof dielines with ink pen on polyester, pattern marking for leather applications with silver pen, or labeling of patterns withballpoint pen. All available Zünd drawing inserts can be used with the Marking Module. Pneumatically driven, this moduleoffers high processing speeds and requires no maintenance.
The Marking Module is available in two versions:Marking Module, single, with one pen positionMarking Module, dual, with two pen positions
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 3/8
G3
Aluminum compositesDibond, Alucore, Alubond, HyLite,Reynobond, etc.
Advertising andmessage boards
WoodMDF, MDO, pressboard, berboard,veneer, and other wood products.
Table plates
Rigid foamcoreGatorboard, Forex, expandedPVC, etc.
3D displays
AcrylicsPlexiglass, Makrolon, polycarbona-tes, thermoplastics, etc.
Acrylic furnishings
Routing Module
Designed speci cally to meet the rigorous demands of 24/7 graphics production, the G3 router module (RM-A) is the ideal modulefor processing rigid plastics, non-ferrous metals, aluminum composites, and many other substrates that require routing.
Excellent speed, productivity, and versatility are the de ning attributes of the Zünd Router Modu -le. A 1 kW high-frequency spindle drives the RM-A, capable of processing tough, rigid substratesup to 26 mm / 1“ and soft er materials up to a maximum of 50mm / 2“ thick. The high frequencyof the spindle in combination with the solid construction of G3 result in higher processing speedsthan are possible with conventional CNC router s. This maximizes the productivity of the cutterwhen processing acrylics, wood, and plastics and enhances the range of materials that can becut.
Materials and applications
Minimum Quantity LubricationMinimum quantity lubrication (MQL) permits awless routing of solid, non-ferrous metals, such asPERALUMAN®, Signicolor® EN AQ 5754 and 3005.
Surface compensationA unique surface-recognition system allows for consistent, precise engraving, v-cutting, anddrilling of materials even with inconsistent material thicknesses.
3D routingG3 is capable of performing simultaneous 3-axis (X , Y, Z) routing operations quickly and easily.With compatible 3D les, the G3 router can be used to produce dimensional signage.
Dust collectionEf cient removal of dust and debris c reated during the routing process is c ritical for maintai -ning consistent cut quality and minimizing manual cleanup. Keeping the cutting surface cleanfacilitates quick changeovers between routing and cutting jobs. The suction is user-adjustable tokeep small parts from being lifted or accidentally vacuumed away. The dust-collection collar ispositioned automatically for the set material thickness.
The routing debris travels through the vacuum hose, which is supported by a gantry, to thevacuum cleaner. If the installation site cannot accommodate the height of the gantry, guiderailscan be mounted directly to the ceiling. Depending on the application, Zünd recommends usingspecialized vacuum/dust extraction systems. The cutter automatically turns the vacuum systemon/off as needed.
Active air coolingThe routing module‘s integral heat sink channels air ow from the dust extraction unit to ef c ient -ly cool the spindle. This maximizes both performance and longevity of the router spindle.
Revolutionary vacuum hold-down, mindful of environmentWith the combination of Sealgrip™ underlay and a turbine-based vacuum generator, even verysmall parts can be cut. Sealgrip™ is a highly porous, sacri cial underlay material with consi -derable lateral friction that keeps parts from moving sideways. The cutting system automaticallycontrols the pre-set vacuum pressure, dynamically increasing or decreasing turbine speed asneeded. Conventional routing systems using standard vacuum pumps comsume 6 times more
energy than the G3 vacuum system with Sealgrip™ routing underlay.
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 4/8
G3 S3
G3 S3
G3 S3
Kiss-Cut Tool
Universal Cutting Tool
Universal Routing Tool
The variable knife pressure of theKiss-Cut Tool (KCT) makes this theideal tool for kiss-cutting thin ma-terials to a liner. All common typesof vinyl/ lms up to 2-3 mm (1/8“)thick can be cut at maximumspeeds. A xed glide shoe allowsfor maintaining set cutting depths,even with e.g. re ective vinyls.
Decorative vinylPressure-sensitive vinyl,translucent vinyl/ lm, overlaymaterials, etc.
Wrapped sphericalsign
Masking lmMasking tape/ lm, airbrush
lm, sandblast stencil,plotting lm, etc.
Sandblast stencil
Re ectivematerialsRe ective traf c and warningsigns, emergency vehiclegraphics, etc.
Traf c signs
Perforated vinylTranslucent/see-throughvinyls.
Vehicle graphics,wraps.
Magnetic materials
Custom magnets
PolypropyleneThick plastic lms, PE,PET, etc.
Clear packaging
CardboardCarton, photo paper, poster-board, display board, mirrorboard, Kraftboard, Finnboard,
Packaging
Corrugated/honeycombPlastic and other honeycombmaterials, Coroplast, Akyprint.
Honeycomb box
The Universal Cutting Tool (UCT)is perfect for through-cuttingmaterials with thicknesses up toapprox. 3-5 mm (3/16“). A spring-loaded glide shoe permits cuttingvery ne details. Optionally, a xed
glide shoe can be used for cutt ingat set depths, e.g. when cuttingprinting or coating blankets. Theuse of drag knives allows formaximum processing speeds, andcompared to motor-driven tools,the UCT is very inexpensive topurchase and maintain.
AluminumcompositesDibond, aluminum compo-sites, etc.
Billboards
MDF sheetsPlywood, berboard, etc.
Table plates
Rigid foamcoreGatorboard, Forex, expandedPVC, etc.
3D displays
AcrylicsPlexiglass, Lexan, poylycarbo-nates, thermoplastics, etc.
Acrylic furnishings
At the core of the Universal Rou-ting Tool (URT) is a 300 Watt routerspindle. In combination with the3 mm router bits Zünd offers, thistool delivers high-performancerouting for a wide range of appli-cations. In engraving mode, theuser can set an exact processingdepth for consistent cutting/engraving even if the materialthickness varies. Besides softermaterials, the URT is capable ofprocessing thicker/tougher sub-strates in multiple passes.
Many different materials,always the right tool
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 5/8
G3 S3
G3 S3
G3 S3
VCT* PPT
VCT VCT PPT PPT
V-Cut Tools
Electric Oscillating Tool
Pneumatic Oscillating ToolThe robust, air-driven PneumaticOscillating Tool (POT) is especial-ly well suited for cutting dense,tough, thick materials. The 8 mmstroke of this tool delivers thenecessary power for cutting mate-rials up to a maximum thicknessof 50 mm / 2“.
Sandwich boardHoneycomb materials, incl.X-Board, Re-Board, Bio -Board, etc.
Displays andexhibits
FoamPolystyrene, polyurethane,styrofoam, Styropor (EPS),and similar materials,
Foam packaging
CorrugatedcardboardTriple-wall and other thickcorrugated board.
Corrugatedshipping boxes
Rubber Silicone, natural rubber,latex, EVA foam, spongerubber, felt.
Ejection rubber
Foam-basedmaterialsKromaplast, foamcore, andsimilar mat., incl. rubber, felt,Ega x, Kapa.
3D Lettering
CorrugatedSingle-wall corrugated board,carton, paperboard, etc.
POP displays
Leather Top grain, shoe leather, solematerials, man-made leather.
Shoes
FeltFelt, eece, and similarmaterials.
Handbags
The Electric Oscillating Tool (EOT)is available in two versions, with0.5 mm and with 1.0 mm stroke.This tool is ideal for cutting softand medium-density materialsup to 28 mm / 1“ thick. The highoscillation frequency of the EOTallows for very fast processingspeeds, while the use of verypointed blades permits cuttingeven ne details. Zünd recom -mends using the tool with .5 mmstroke for materials up to approx.3 mm (less than 1/8“) for max.cutting speed; thicker materialsrequire the EOT with 1 mm stroke.
Sandwich boardHoneycomb materials, incl.X-Board, Re-Board, Bio -Board, etc.
X-Board
Foam-basedmaterialsKapaplast, Maxxboard, Kapa-mount, Kapabond, Foam-X,foamboard, Ega x.
Brochure holder
VCT: the seemingly impossiblemade nearly commonplace. 3Dstructural designs using the V-CutTool (VCT). The tool is capable ofcutting at ve different angles (0°,15°, 22.5°, 30°, 45°) and, depen -ding on material density, up to athickness of 16 mm / 5/8“.PPT: 45° high-quality angle cutscan be produced with the Passe-partout Tool (PPT). Relative modeallows for precise depth control.
The maximum material thicknessthis tool can process is 5 mm /3/16“.
Carton, matboard
Picture framing
Gray board
Archival boxes
*compatible with G3 only
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 6/8
G3 S3
G3 S3
CTT1 CTT2 CTT3
G3 S3
Universal Drawing Tool
Creasing Tools
Raster™ Braille Tool
Leather Shoe leather, sole materials,top grain, man-made lea-ther, etc.
Shoes
Paper, cardboard
Patterns, stencils
Rubber Various gasket materials
Insulation, roo ng
Te on lm
Building wraps
The Universal Drawing Tool (UDT,DT) is used to create simple text,symbols, seamlines, dart mar-kings, and notches with a drawingtool. Text orientation can be in anydirection, at any angle. Suitableare industry-standard drawing/plotting tools, such as felt tip,ballpoint, and ink.
PolypropyleneSofter, exible plastics,thermoplastics, thick lms,and similar materials.
Packaging
Folding cartonCardstock, paperboard,posterboard, chroma pa-per, etc.
Dispenser
Corrugated card -boardDouble-wall corrugatedboard, medium-weightpackaging.
Corrugated box
Honeycomb mate -rialsCoroplast and similar pastichoneycomb, Akyprint, etc.
Coroplast box
Zünd offers a variety of crease tools for different types ofmaterials. For best creasing results in speci c applications,crease wheels are available in various diameters.
The Raster™ method has emer-ged as the preferred method forproducing tactile Braille signagefor the blind and visually impaired.The process is quite simple: therouter module drills the holes,and the Raster™ Braille Tool (RBT)inserts the spheres to createraised dots.
Examples of signage for the blind and visually impaired.
Wood Aluminum Acrylics Plastics
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 7/8
8/11/2019 Modules Tools Applications En
http://slidepdf.com/reader/full/modules-tools-applications-en 8/8
Headquarter Zünd Systemtechnik AGIndustriestrasse 8CH-9450 AltstättenT +41 71 757 81 00F +41 71 757 81 [email protected]
0 5 / 2 0 1 2