Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.
-
Upload
arlene-elliott -
Category
Documents
-
view
221 -
download
2
Transcript of Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.
![Page 1: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/1.jpg)
Module 9 | Slide 1 of 46 2012
Premises
Part One
Basic Principles of GMP
12
![Page 2: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/2.jpg)
Module 9 | Slide 2 of 46 2012
PremisesPremises
Objectives
1. To review general requirements
2. To list key requirements for site choice
3. To consider specific requirements for main areas
4. To list major facilities required in a multifunction site
![Page 3: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/3.jpg)
Module 9 | Slide 3 of 46 2012
12.1
PremisesPremises
Principle
Important aspects to be kept in mind to ensure the suitability of the operations to be carried out for different dosage forms and product range:
Location
DesignConstructionAdaptationMaintenance
![Page 4: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/4.jpg)
Module 9 | Slide 4 of 46 2012
12.1, 12.4
PremisesPremises
Location
Geography, climate, noise and economic factors
Neighbouring factories and sites What do they do? What impact can they have on the business?
Pollution/effluent control
Minimum risk for contamination of products and materials
![Page 5: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/5.jpg)
Module 9 | Slide 5 of 46 2012
12.4
PremisesPremises
Principle
Premises must be located, designed, and with a layout to minimize risks of cross-contamination, e.g. not located next to a malting factory with high airborne levels of yeast
![Page 6: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/6.jpg)
Module 9 | Slide 6 of 46 2012
12.2
PremisesPremises
General
The layout and design should aim to:
Avoid any adverse effect on the quality of products
Avoid cross-contamination, build-up of dirt and dust
Minimize risks of errors
Permit effective cleaning
Permit effective maintenance
![Page 7: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/7.jpg)
Module 9 | Slide 7 of 46 2012
PremisesPremises
Design Principles
Ensure logical flow. Keep in mind:
Material flow
People flow
Process flow
(Look at the layouts and see how people, materials and products flow)
12.10
![Page 8: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/8.jpg)
Module 9 | Slide 8 of 46 2012
Q C
Offices Gowning
Canteen
Incoming goods
Corridor
Corridor
Shipping
Corridor
Packaging
Weighing Processing
Filling
Raw Materials
& Packaging Storage
Washing
Machine
Shop
Finished Products Storage
Corridor Utilities and Services Waste Treatment
PremisesPremises
Example of Materials and People Flow
Arrival of goods Entrance for visitors Entrance for Workers Shipment of goods
Material Flow
People Flow
Zone: Clean
Zone: Packaging
Zone: Controlled
![Page 9: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/9.jpg)
Module 9 | Slide 9 of 46 2012
12.5, 12.7, 12.9
PremisesPremises
Design
Suitable design and construction to facilitate good sanitation
Cleaning and disinfecting according to detailed written procedures – records maintained
Maximum protection against entry of insects, birds and animals
Procedure for rodent and pest control implemented
![Page 10: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/10.jpg)
Module 9 | Slide 10 of 46 2012
12.8, 12.32
PremisesPremises
Construction and utilities
Suitable construction materials
Electrical supply
Suitable lighting (especially for visual on-line checks)
Temperature and relative humidity
– Controlled, monitored and recorded
Appropriate and effective ventilation
These may affect products during manufacture or storage as well as functioning of equipment
![Page 11: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/11.jpg)
Module 9 | Slide 11 of 46 2012
Basic Principles of GMPBasic Principles of GMP
The temperature and relative humidity should be controlled, monitored in accordance with an SOP, and the results recorded.
The limits should be appropriate according to the storage requirements for materials and products
![Page 12: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/12.jpg)
Module 9 | Slide 12 of 46 2012
12.3
PremisesPremises
Construction
Dust generating operations e.g. sampling, weighing, mixing, packing of
powders, etc.
Measures should be taken to prevent cross-contamination
Measures to facilitate cleaning– E.g. Materials of construction; ledges and edges; smooth
surfaces
![Page 13: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/13.jpg)
Module 9 | Slide 13 of 46 2012
Basic Principles of GMPBasic Principles of GMP
Design of areas for weighing of materials
Proper air supply Dust control measures
(including extraction of dust and air)
Easily cleanable surfaces No areas for dust
accumulation Protection of material,
product and operator
![Page 14: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/14.jpg)
Module 9 | Slide 14 of 46 2012
12.6
PremisesPremises
Maintenance
Procedure for maintenance of the premises
Records maintained
Damage repaired
Repairs and maintenance should not present any hazard to the quality of the products
What should be done if there is any damage while a product is being processed?
![Page 15: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/15.jpg)
Module 9 | Slide 15 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 16: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/16.jpg)
Module 9 | Slide 16 of 46 2012
12.11 – 12.36
PremisesPremises
Specific areas
In Part 2 – we will review some recommendations for specific areas such as:
Ancillary areas
Storage areas
Weighing areas
Production areas
Quality control areas
![Page 17: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/17.jpg)
Module 9 | Slide 17 of 46 2012
Premises
Part two
Basic Principles of GMP
12
![Page 18: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/18.jpg)
Module 9 | Slide 18 of 46 2012
12.11 – 12.14
PremisesPremises
Ancillary Areas
Rest and refreshment rooms: Separate from production and quality control areas
Changing, washing and toilet areas accessible and appropriate numbers
Animal houses well isolated – separate air handling and entrance
Maintenance workshops: Separated from production - if not possible – tools in reserved areas
![Page 19: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/19.jpg)
Module 9 | Slide 19 of 46 2012
Basic Principles of GMPBasic Principles of GMP
TOILETS
AIRLOCK
CANTEEN
FACTORY CHANGEROOM
![Page 20: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/20.jpg)
Module 9 | Slide 20 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 21: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/21.jpg)
Module 9 | Slide 21 of 46 2012
Basic Principles of GMPBasic Principles of GMP
Separate receiving and dispatch bay
Protect materials and products from weather
Area to clean incoming materials provided
12.17
![Page 22: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/22.jpg)
Module 9 | Slide 22 of 46 2012
Basic Principles of GMPBasic Principles of GMP
Cleaning of incoming containers
Cleaning with a cloth, or duster
Cleaning by using a vacuum cleaner
Use of air curtains and air tunnels
![Page 23: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/23.jpg)
Module 9 | Slide 23 of 46 2012
12.15, 12.16
PremisesPremises
Storage areas - 1
Sufficient capacity, orderly storage of categories of materials and products
Storage conditions
Separate and segregated areas
– starting materials, packaging materials, intermediates, bulk, finished products, quarantined, released, rejected, returned and recalled products and materials
![Page 24: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/24.jpg)
Module 9 | Slide 24 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 25: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/25.jpg)
Module 9 | Slide 25 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 26: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/26.jpg)
Module 9 | Slide 26 of 46 2012
12.16
PremisesPremises
Storage areas - 2
Good storage conditions– Clean– Dry– Temperatrure – Lights
Within defined limitsProvided, controlled, Monitored and recorded
![Page 27: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/27.jpg)
Module 9 | Slide 27 of 46 2012
12.18 – 12.20, 12.22
PremisesPremises
Storage areas - 3
Separated areas recommended - clearly marked and access restricted e.g.:
– Quarantine area
Segregate areas:
Rejected, recalled and returned materials and products
Separate sampling area recommended to prevent risk for contamination or cross-contamination
Safe and secure areas for highly active, radioactive materials, narcotics and other materials (risk of abuse, fire, explosion)
![Page 28: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/28.jpg)
Module 9 | Slide 28 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 29: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/29.jpg)
Module 9 | Slide 29 of 46 2012
12.21
PremisesPremises
Storage areas – 4
Printed packaging materials
Correct materials are critical to ensure compliance with correct labelling of products
Ensure compliance with specifications, prevent mix-ups
Special attention to:– Sampling
– safe and secure storage
![Page 30: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/30.jpg)
Module 9 | Slide 30 of 46 2012
12.23
PremisesPremises
Weighing areas
Weighing operations – in separated areas
Appropriate design (see also training material on HVAC)
Provision for dust control
Smooth, impervious, durable, easy-to-clean finishes
Cleaning procedures and records
Documentation, e.g. SOPs, logs and records
![Page 31: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/31.jpg)
Module 9 | Slide 31 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 32: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/32.jpg)
Module 9 | Slide 32 of 46 2012
12.24
PremisesPremises
Production areas - 1
Minimize risk of cross-contamination:
Dedicated and self-contained facilities for some products such as highly sensitizing materials (e.g. penicillins) or biological preparations (e.g. live microorganisms)
Separate facilities for other products such as some antibiotics, hormones, cytotoxic substances
Non-pharmaceuticals normally not in the same facility, e.g. pesticides, herbicides
![Page 33: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/33.jpg)
Module 9 | Slide 33 of 46 2012
12.32, 12.26, 12.31
PremisesPremises
Production areas -2
Layout in accordance with sequence of production (flow)
Layout to avoid mix-ups and cross-contamination
Orderly and logical positioning of equipment
minimizes risk of contamination, mix-ups and missing production steps
Appropriate cleanliness level, and lights
Adequate work and in-process storage space
![Page 34: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/34.jpg)
Module 9 | Slide 34 of 46 2012
12.32, 12.26, 12.31
PremisesPremises
Production areas -2
Specially designed areas for packaging
Layout
Space
No mix-ups
![Page 35: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/35.jpg)
Module 9 | Slide 35 of 46 2012
12.27
PremisesPremises
Production areas - 3
Starting and packaging materials, intermediates and bulk exposed to environment: Interior surfaces (walls, floors, ceilings) – smooth, free from
cracks and open jointsNo shedding of particlesEasy and effective cleaning permitted
Disinfection if needed
![Page 36: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/36.jpg)
Module 9 | Slide 36 of 46 2012
12.28, 12.29
PremisesPremises
Production areas - 4
Design of pipework, light fittings, and ventilation points– no recesses that are difficult to clean
Access for maintenance from outside production areas
Drains– adequate size– equipped to prevent back-flow
Open channels avoided
![Page 37: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/37.jpg)
Module 9 | Slide 37 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 38: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/38.jpg)
Module 9 | Slide 38 of 46 2012
12.30
PremisesPremises
Production areas - 5
Effective ventilation with air control facilities
Including filtration of air to a sufficient level to prevent contamination and cross-contamination – also external environment
Control of temperature and relative humidity where necessary
Regular monitoring of conditions during production and non-production periods
![Page 39: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/39.jpg)
Module 9 | Slide 42 of 46 2012
12.33, 12.34
PremisesPremises
Quality Control areas - 1
QC laboratories should be separate from production areas
Separate areas for biological, microbiological and radioisotope methods
Suitable design with sufficient space to avoid mix-ups and cross-contamination
Suitable space for storage samples, reference standards, solvents, reagents and records
![Page 40: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/40.jpg)
Module 9 | Slide 43 of 46 2012
Basic Principles of GMPBasic Principles of GMP
![Page 41: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/41.jpg)
Module 9 | Slide 44 of 46 2012
12.35, 12.36
PremisesPremises
Quality Control areas - 2
Suitable construction materials
Prevention of fumes
Ventilation
Separate air supply (production and QC)
Separate rooms for some instruments to protect them from interference (e.g. electrical, vibration, moisture, etc.)
See supplementary training on QC laboratories
![Page 42: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/42.jpg)
Module 9 | Slide 45 of 46 2012
PremisesPremises
Group Session - Option 1
A company wishes to manufacture simple, non-sterile medicines. It has engaged a consultant to draw up some building plans
Comment on the building plans “faxed” through to your group
Comment on the people flow, the process flow and the material flow
![Page 43: Module 9 | Slide 1 of 46 2012 Premises Part One Basic Principles of GMP 12.](https://reader038.fdocuments.us/reader038/viewer/2022102808/56649d035503460f949d6bd6/html5/thumbnails/43.jpg)
Module 9 | Slide 46 of 46 2012
PremisesPremises
Group Session - Option 2
Consider a multifunction factory producing sterile and non-sterile products: What GMP facilities would you expect to find in this
factory? What would you look for in the quality of those facilities
and what weaknesses might you find? How can companies overcome those weaknesses?