Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23...
-
Upload
carmella-griffin -
Category
Documents
-
view
218 -
download
0
Transcript of Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH-17820-08-60-F-23...
Module 6: Workplace & Chemical Hazards6.4 PCB
Susan Harwood Grant Number SH-17820-08-60-F-23
Shipbreaking
DisclaimerThis material was produced under grant
number SH-17820-08-60-F-23 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or polices of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.
2
Objectives
3
Identify the chemical hazardsList potential locationsExplain what PPE may be requiredDescribe the effects of chronic
exposure
4
5
PCBs means polychorinated biphenyls.
Figure 1 Container of wiring being processed 6
209 individual chlorinated compounds make up the chemical PCB.
Figure 2 Vessel in slip awaiting for dismantling7
It comes in an oily liquid or solids that range from colorless to yellows.
Figure 3 PCB wiring in roll off box8
There is no associated taste or smell.
Figure 4 PCB shredder operation 9
The PCB makes good insulators.
Figure 5 Close up view of electrical wiring 10
In 1977, the U.S. outlawed the manufacturing of PCB.
Figure 6 Roll off box container for electrical wiring 11
12
Lubricants in transformers.
Figure 7 Storage area for PCB’s and mercury 13
Electrical wiring that runs throughout the ship and inside wiring of equipment.
Figure 8 Electrical wiring in the engine room 14
Capacitors
Figure 9 Electrical components in drum 15
Prior to 1977 fluorescent lighting may contained PCB.
Figure 10 Recycled lighting in container 16
Vacuum pump fluids
Figure 11 pumps in the engine room17
18
Limits for air contaminants is 0.5 mg/m3
Figure 12 Engine room near the generator19
Protective clothing to reduce skin contact.
Figure 13 Worker in protective clothing on board vessel 20
Respirators when potential for airborne contaminates exist.
Figure 14 Full faced respirator 21
Face shield or goggles to prevent contact with face or eyes.
Figure 15 Face shield and secondary eye protection 22
Chemical resistant gloves and boots should be worn if exposure to liquid has been identified.
Figure 16 Rubber gloves sealed to suit23
Ensure adequate ventilation when working in a confined space.
Figure 17 Ventilation unit on containment 24
25
Studies conclude that liver damage occurs with PCB exposure.
Figure 18 Containment exercise 26
Impairs reproductive systems.
Figure 19 Crowd of people in park 27
Some studies concluded that exposure increases risk of cancer.
Figure 20 Roll off container of water collected on board28
Exposure to skin may causes rashes
Figure 21 Exercise in containment barriers 29
Behavior problems associated with motor skills and short-term memory.
Figure 22 Breaking down containment room after exercise30
31
32
ReferencesOSHA eTool www.osha.govWikipedia Encyclopedia http://en.wikipedia.orgAgency for Toxic Substances & Disease Registry
www.atsdr.cdc.gov
33
34
Worker safety is a priority.