module 2
description
Transcript of module 2
Ziyi Wang Student No. 556062 Semester: 2/2012 Group: 3
Readings and lectures
• During Module 2, the limit time forces me to learn and do my
work faster. For Module 2, we need to make the contour model
out first and than make out the basic model according to the
contour model.
• The things I get from the lectures are the method of paneling
and the construction of forms. Rhino really provide a much
efficient way to calculating and setting up patterns into our
model than made our model by hand.
• And about the readings, Scheurer said in his writing that: “What
is obvious in the workshop of a model builder sometimes gets
forgotten when almost infinite digital storage space is at hand:
a perfect model does not contain as much information as
possible, but as little as necessary to describe the properties of
an object unambiguously.” Before reading this article, I am
keeping on thinking that how can I have several patterns on
one model. Now I just want to find out one suitable pattern for
my model.
Summary of natural process
I usually see the poilceman check the fingerprints of the criminals in the films. Because of this, I usually thinking about the fingerprints on our fingers. What
make it become these shapes? Why the fingerprints can change during some time? Why everyone's fingerprints are different? Those questions make me
really interested in fingerprints. Fingerprints can increase the friction when we use our hands to touch things and help us to grasp things tight. The patterns under shoes have the some
function as fingerprints. The fingerprints are natural development during human lives. Gene influence the shape of fingerprints. Because the gene of
everyone are different, so the fingerprints of everyone are different. Actually, fingerprints not only influenced by gene, but also influenced by the around
circumstances. Fingerprints appear when children are about three or four monthes old before born and they will have a little changeduring the growth
period. The shapes of fingerprints won't change after 14 years old.
Fingerprints have three basic types
which are: Arch, Loop and Whorl.
People sometimes use another kind of ways to divide the basic types of
fingerprints. Nowdays, scientists
already can use models to reproduce
the normal fingerprints and the
formation of some uncomplicated rare
fingerprints and they are: Arch, Whorl, Double Loops and Simple Loop.
The imaging structure which has the same shape of fingerprints.
Fig. 4. (a) Ridge formation starts at one or two focal points on the middle of the pad and along
the nail furrow. (b) The region where ridges arise first usually coincides which the core of loops or whorls. (c) Ridges spread over the fingertip, the last areas covered by them are the triradii. (from
Bonnevie (1927a)).
The lights which get from the idea of fingerprints.
Final model
• There was one thing I added in moving from Module one
to Module two and that is the scale. My final model will be
about 30cm in height, 30cm in width and 40cm in length.
And the scale will be 1:10. I plan to hold it on hand for the
natural progress is finger prints.
Contour model
• To make the contour model , I draw the
lines which have 5 mm distance between
each other on a paper. And after that, I
draw the lines on the surface of the model.
Finally, I cut the model into pieces along
the lines.
Digitization
• These pictures show the simplest way to make the 2D
pictures into digital lines. And this method won’t influence
the model too much.
• The two above pictures are the model made from
contour line model. The picture at right is the model which
can also see waves of finger prints from front or right
directions.
Digital model – 2D
• These pictures show the practice
of making 2D model.
• I tried all the options in the setting
command. I think the paneling
skills are really amazing. It just use
the points as the basic points, and
the patterns will appear right after
the command has been made.
boxX panelling Tri-basic panelling Diamond panelling
Angle panelling
Wave panelling
Digital model – 3D
• These pictures show the practice of making 3D
model.
• Before setting up the patterns, I will need to set the
offset points first, and use the original points and
the offset points to make the 3D patterns.
• The diamond 2 is the most one which is I want to
get. When we looking at our finger prints, we can
find out that the finger prints which we think it is a
surface is actually divided into lots of small parts.
Window panelling Pyramid 1 panelling Pyramid 2 panelling
Change of the basic model
• After close looking at the paneling model, I want to
change the model. I can see waves when I look at the
model from the top, but not in other direction. And the
lines are too simple. So I want to see waves from other
view like: front and right.
• After changing of the curves, I can see waves in all
directions of my model.
Prototype construction
• For the material of my
lantern, I want to use the
white paper which can
show the light in the
model. And I hope the
model can give a
beautiful shadow.
The final model
• This is my final model
which add the pattern I
get from the natural
progress. And those
pictures are the different
view of the model.
Reference lists:
http://www.eikongraphia.com/wordpress/wp-content/Firstrung.jpg
http://www.handresearch.com/news/pictures/fingerprint-patterns-arch-loop-whorl.jpg
http://s3.thisnext.com/media/largest_dimension/718EC043.jpg
http://www.dailydesigninspiration.com/diverse/adv/spicyh/It-Works-Fingerprint-Security-System.jpg
http://math.arizona.edu/~anewell/publications/Fingerprint_Formation.pdf
Scheurer, F. and Stehling, H. (2011): Lost in Parameter Space? IAD: Architectural Design, Wiley, 81 (4), July, pp. 70-79
http://www.australianexplorer.com/photographs/victoria/federation_square_5.jpg
http://architectureau.com/site_media/media/files/archive/architecture_australia/images/2003/03/images/070208.jpg
http://www.architravel.com/files/buldingsImages/bulding284/FederationSquare_1.jpg
http://www.thecollectormm.com.au/gallery/photography/City/slides/FedSquare5.jpg