SARAH CHAN

Student No: 641728 Semester 2/2013 Group 5

The red dotted lines represents the appearance of the umbrella when closed.

The umbrella was meausred using a small tape measurer. The scale used is 1:10, where 1 cm represents 10 cm on paper, as depicted in the drawings.

The umbrella was open to its fullest before it was measured and drawn in order for it to be as accurate as possible.

The section drawing displays the umbrella’s inside structure as well as its exterior.

PLAN

ELEVATION SECTION

860

860

100

395

110

85

25

55

580

Scale 1:10

0 10 20 30 40

MEASURED DRAWING - UMBRELLA

These sketches are of an umbrel-la, also known as a Japanese parasol. It is made up of wood and string, giving it an interesting structure when the umbrella is open. In this perspective, where the umbrella is open to its fullest, the configuration between the pink string and the wood that creates the structure seems very compli-cated and a pattern of repeti-tion can be observed.

The sketch above shows there is a stopper on the top, where the umbrella can stay open the whole time. Looking up from this perspective also gives another unique appearance, where the wooden bars look like they are overlapping.

The handle of the umbrella has a curved shape, which fits nice-ly with our grip and hold of our hand.

The umbrella is wider than it is lon-ger, where its width is 86 cm and its height is 58 cm.

UMBRELLA SKETCHES

DIGITAL MODEL - UMBRELLA

TOP

FRONT RIGHT

These images of the umbrella were modelled using the program ‘Rhi-noceros 5.0’ in a three dimensional manner.

Using the revolve com-mand, I was able to draw an outline of half of the umbrella and rotate it 360 degrees, giving the um-brella its three dimensional appearance.

DEVELOPMENTAL MODEL

Seeking inspiration from the move-ment of the umbrella, I was able to design a bone structure that incor-porated a similar action to the um-brella. Using cardboard strips for the bone structure and split pins, I was able to use this as my foundation to represent the ‘bone’ element and its mobility.

My initial ideas for the model came through my sketches and brainstorming. By includ-ing the umbrella’s mobility aspect, I was able to come up with the idea of using a bird.

The body was built using pieces of cardboard that were placed on top of one another creating layers.

The skeleton part of the model, which is represented by the bones of the structure, can be rotated at its joints. The main branches coming out from the body are lo-cated in a diffrerent layer to have an overlapping effect.

DEVELOPMENTAL MODEL

The bones of the wings were cov-ered in feathers, representing its ‘skin’.

As seen in the image of the model’s top view, the wings can extend to its full potential. The image below it presents its structure with the feath-ers on top.

Although the skin used on the mod-el is not a material stretched over the bones, skin can be represented by a layer that covers it.

TOP VIEW

BOTTOM VIEW

IDEATION

FRONT BACK

This design was inspired by not only the umbrella, but also from the nature of a male peascock’s tail.

It is eye catching for the viewers because of its size and its curved feature. This design can portray a confident person who does not mind their personal space to be intruded by strangers.

The design is attention seeking, therefore the individual should feel secure and more accepting.

I have made this design to have the ability to close up, similarly to a peacock when it does not want its colourful feathers to be in view.

This way, the individual has a choice to have it open or closed like the umbrella.

IDEATION

FRONT BACK

This design has branches that come out from the sides of the body and shoots outwards. The branched appearance is inspired by the umbrella where it is held up by many thinner sticks,

The design crosses over the front and the back of the body which represents the idea of security. This representation is enhanced by the three dimensional triangular shapes.

The side arms are bear because an individ-uall can feel more welcoming when ap-proached on their side rather than in front of them.

There is no skin covering the bne structure, only triangular shapes.

IDEATION

FRONT BACK

Inspired by the model of a bird, I designed a pair of wings that will have the same mobility as the model. Where the wings can slide up and down.

The bone structure has a skin layer stretched over it with shapes cut out of it.

The wings are situated on the back of the individual, where they flare out to the side, will attract people to their sides instead of the front.

Personal space is not so much of an issue because the wings of this design has a representation of confidence and attention seeking.