Modular Patch Panel Selection Guide · An Extensive Selection of Patch Panels Supports Your...
-
Upload
trankhuong -
Category
Documents
-
view
225 -
download
0
Transcript of Modular Patch Panel Selection Guide · An Extensive Selection of Patch Panels Supports Your...
Modular Patch Panel Selection Guide
An Extensive Selection of Patch Panels Supports Your ApplicationPanduit offers an extensive selection of modular patch panels, with various styles and port densities and an assortment of labeling options making them ideal for any installation.
Modular patch panels accept all Mini-Com® Modules in copper, fiber, and A/V, which snap in and out for easy moves, adds, and changes. This modular system is ideal for multimedia applications, providing flexibility to customize any installation. All patch panels mount to standard EIA 19-inch or 23-inch racks with optional extender brackets.
A variety of accessories are available to optimize the installation. Strain relief bars are recommended for all installations to properly support cables exiting the back of the panel. Covers and blank panels promote proper airflow and cooling by filling unused rack openings.
Unshielded and ShieldedUnshielded Patch PanelsUnshielded patch panels consist of a metal panel and molded snap-in faceplates. Removable faceplates on select
panels allow front access to installed modules.
Available features:
•Labelpocketsforeasyidentification;designswithoutalabelpocketaccommodateoptionaladhesivelabeling
•Standardandhighdensity
•Flushmountandfrontaccess
•Flat,angled,andrecesseddesigns
Shielded Patch PanelsShieldedpatchpanelsarerecommendedforhighRFI/EMIenvironments,whereinterferenceisarisk.Panduit’sshielded offering includes integrated shielding which allows seamless integration with the Panduit® Structured Ground™ Grounding System.
Available features:
•Stainlesssteelconstruction(48-portHighDensity includes a molded faceplate)
•Dedicatedareasforportidentification which accept adhesive labels
•AcceptMini-Com® Shielded Jack Modules
•Flatandangleddesigns
•Selectmodelsincludebuilt-instrain relief bar
2 Representative offering only, visit www.panduit.com for complete listing of products.
3visit www.panduit.com
Design
FlatFlatpanelsrequirehorizontalcablemanagerstohelporganizeandroutecablesintoverticalmanagers.Extendedstrain
relief bars are recommended to allow proper cable support.
AngledAngled panels enable higher density by allowing cables to flow to each side of the rack, thus minimizing the need for
horizontal cable managers and allowing patch cords to be routed directly into vertical cable managers. Straight strain
relief bars are recommended, as closer mounting to the panel eliminates sagging and provides improved cable support.
High-Density Patch PanelsHigh-densitypatchpanelsareanidealsolutionforinstallationswithspaceconstraints,areavailableinflatandangled
designs,with48portsinonerackspaceand72portsintworackspaces.Theangleddesignincreasesrackdensity,
managing high-density applications in one-fourth the area needed for conventional cable management systems.
(Highcapacityverticalmanagersarerecommended.)
Strain Relief BarsStrainreliefbars(SRB)areusedtosupportandmanagecablesin
telecommunicationrooms.Panduit’sextensiveselectionofferstheflexibilitytofit
in a variety of applications, and ranges from a simple straight bar to one with
distinctive features such as integrated adjustable clips.
In single rail cabinets or racks, the strain relief bar with direct patch panel mount and
quickreleasebracketisrecommended;itattachesdirectlytomostPanduitpatch
panels providing integrated support.
DISCLAIMER:Theinformationcontainedhereinisintendedasaguideforusebypersonshavingtechnicalskill.BuyershalldeterminethesuitabilityofthePanduitproductforhisintendeduseandBuyerassumesallriskandliabilitywhatsoeverinconnectiontherewith.
4
Unshielded
Representative offering only, visit www.panduit.com for complete listing of products.
Front Access •Recommendedforinstallationswhereaccesstothebackoftherackislimited•Labelfeatureavailable,includeslabelandcover
CPPL24WBLY CPPL48WBLY
CPPL24WRBLY
CPPLA24WBLY CPPLA48WBLY
CPP24WBLY CPP48WBLY
Part Number Design Ports RURecommended
SRBReplacement
FaceplateReplacement
Label LabelLabel (see page 19)
CPP24WBLY
Flat
24 1
ExtendedCFFP4BL
—Adhesive A
CPP48WBLY 48 2 —
CPPL24WBLY 24 1
CFFPL4BL C4PPLK Pocket A,B
CPPL48WBLY 48 2
CPPLA24WBLYAngled
24 1StraightCPPLA48WBLY 48 2
CPPL24WRBLY Recessed 24 1 —
Front removable faceplate extends ½" from the rack, providing front access to the connections
1/2"
Easy quick release tab
Label and label cover
5
Unshielded
visit www.panduit.com
Ultimate ID® Patch Panels •Recommendedforinstallationsthatfollowcommonlabelingstandardorwheremultiplelabelingareasareneeded
•MeetTIA-606-Blabelingstandardswithease
UICMPP24BLY
UICMPP48BLY
UICMPPA48BLY
UICPPL4BL
UICMPPA24BLY
Part Number Design Ports RURecommended
SRBReplacement
FaceplateReplacement
Cover LabelLabel (see page 19)
UICMPP24BLY
Flat
24 1
ExtendedUICPPL4BL
UILC4CL-X Pocket E,G,H
UICMPP48BLY 48 2
UICMPPT24BLY 24 1 UICPP2L4BL
UICMPPA24BLY
Angled
24 1Straight UICPPL4BL
UICMPPA48BLY 48 2
UICMPPTA24BLY 24 1 UICPP2L4BL
UICMPPT24BLY
UICMPPTA24BLY
UICPP2L4BL
Extends 1/8" from the rack
Single or dual label pockets with clear snap-in cover (labels sold separately)
6 Representative offering only, visit www.panduit.com for complete listing of products.
Flush Mount •Mountflushwiththeracktomatchotherproductorequipmentinstalled •Optionalverticalnumbersequencesimplifiesinstallationbymimickingcommonswitch-portnumbering •Pre-printednumbersaboveeachport •Whitewrite-onareasforportorpanelidentification
CPP24FMWBLY
CPP48FMWBLY
CPPA24FMWBLY
CPPA48FMWBLY
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CPP24FMWBLY
Flat
24 1
Extended
Adhesive A
CPP48FMWBLY48 2
CPP48FMVNSWBLY
CPPA24FMWBLYAngled
24 1Straight
CPPA48FMWBLY 48 2
Pre-printed numbers for easy identification
Write on areas for custom adhesive labels
Flush mount design allows panel to align with other rack-mountable products
Unshielded
7visit www.panduit.com
Unshielded
6-Port Configuration •Modulesarrangedingroupsofsixtomatchthelayoutofselectswitches•Faceplatestyle(M6)includeslabelpocketwithpreprintedlabelsandcover•Flushmountstyle(FM6)mountsflushwiththeracktomatchotherproductorequipmentinstalled
CPPL24M6BLY
CPPL48M6BLY
Part Number Design Ports RURecommended
SRBReplacement
FaceplateReplacement
Label LabelLabel (see page 19)
CPPL24M6BLY Flat 24 1
Extended CFPLM6BLY
C6PPLK1-24
Pocket CCPPL48M6BLY Flat 48 2 C6PPLK1-24 C6PPLK25-48
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CPP48FM6BL Flat
48 2Extended
Adhesive ACPP48FM6VNSBL
CPPA48FM6BL Angled Straight
Extends 1/8" from the rack Pre-printed labels included
6-port configuration
CPP48FM6BL
CPP48FM6VNSBL
CPPA48FM6BL
Faceplate Style
Write-on area for custom adhesive labeling
Vertical number sequence mimics common switch port numbering
Flush Mount Style
8 Representative offering only, visit www.panduit.com for complete listing of products.
High Density •Recommendedforinstallationswithlimitedrealestate•Allowsupto48unshieldedconnectionsperrackunit
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CPP48HDWBLY
Flat
48 1
Extended
— —
CPP48HDEWBL Adhesive E
CPP48HDVNSWBL — —
CPPA48HDWBLY
Angled SRBM19BLY
— —
CPPA48HDEWBL Adhesive E
CPPA48HDVNSWBL — —
Unshielded
CPP48HDWBLY CPPA48HDVNSWBL
Standard number sequence (no labeling)
Enhanced label area accepts custom adhesive labeling
Vertical number sequence mimics common switch port numbering (no labeling)
CPPA48HDEWBL
9visit www.panduit.com
High Density •Recommendedforinstallationswithlimitedrealestate;allowsupto72connectionsin2rackunits
Part Number Design Ports RURecommended
SRBReplacement
Label LabelLabel (see page 19)
Flush Mount Design
CPP72FMWBLY Flat72 2
ExtendedNA Adhesive E
CPPA72FMWBLY Angled SRBM19BLY
Faceplate Design
CPPL72WBLY Flat72 2
ExtendedC72PPLK Pocket D
CPPLA72WBLY Angled SRBM19BLY
Unshielded
Faceplate Design•Faceplatecanberemovedfromthefrontofthepanel,allowingeasyaccesstotheconnections
•Recommendedforinstallationswithspacelimitationthatneedlabeling
•Includeslabelpocketwithlabelsandlabelcovers
CPPL72WBLY
CPPLA72WBLY
Extends 1/8" from the rack
Preprinted labels included
CPP72FMWBLY
CPPA72FMWBLY
Flush mount design allows panel to blend with equipment and other panels on the rack
Preprinted numbers
Flush Mount Design
Accepts adhesive labels
WB89D
89D bracket for use with CPP12WBL
10 Representative offering only, visit www.panduit.com for complete listing of products.
32 Port •Recommendedforinstallationsinneedofasemi-high-densitypanelin1RU
CPP32WBLY
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CPP32WBLY Flat 32 1 Extended Adhesive E
Part Number Design Ports RUReplacement
Faceplate LabelLabel (see
page 19
CPP12WBL 89D12
—CFFP4BL Adhesive A
CWPP12WBL WallMount —
Wall Mount •Recommendedforwallmountapplicationswithlimitedspace,whenfewportsarerequired
•Acceptscustomadhesivelabels
•Frontaccessforeasieraccesstoconnections
CPP12WBL (WB89D bracket not included)
CWPP12WBL
Unshielded
Arranged in groups of 8
Built-in mounting frame
Extends 1/8"from the rack
Jacks mount in 90° orientation
3"
Shielded
11visit www.panduit.com
Standard Density •RecommendedforenvironmentswithpotentialRFI/EMIinterference•Shieldedjackmoduleremovaltoolincluded
CP16BLY
CP24BLY
CP48BLY
CPA24BLY
CPA48BLY
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CP16BLY
Flat
161
Extended
Adhesive
F
CP24BLY 24
ACP48BLY 48 2
CPA24BLYAngled
24 1Straight
CPA48BLY 48 2
All stainless steel construction allows shielded jacks to bonddirectly to panels
Write-on areas accept custom adhesivelabeling
Built in grounding lug bonds panel to rack
12 Representative offering only, visit www.panduit.com for complete listing of products.
Part Number Design Ports RU LabelLabel (see page 19)
CP16WSBLY
Flat
161
Adhesive
F
CP24WSBL 24A
CP48WSBLY 48 2
Shielded
Standard Density with Integral Support •RecommendedforenvironmentswithpotentialRFI/EMIinterference•Shieldedjackmoduleremovaltoolincluded
CP16WSBLY
CP24WSBL
CP48WSBLY
Built-in grounding lug helps bond panel to rack
Write-on areas accept custom adhesive labeling
Stainless steel construction allows shielded jacks to bond directly to the panel
Integral support bar helps organize cables (cable ties included)
13visit www.panduit.com
High Density •RecommendedforinstallationswithlimitedrealestateandpotentialRFI/EMIinterference•48portsin1RU
CP48HDBL
CPA48HDBL
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CP48HDBL Flat48 1
ExtendedAdhesive E
CPA48HDBL Angled Straight*Includes trilobular screws to properly bond the panel to the rack
Shielded
Preprinted numbers for easy port identification; accepts custom adhesive labeling
Stainless steel construction with metal bonding strip properly bonds shielded jack modules
14 Representative offering only, visit www.panduit.com for complete listing of products.
High Density
CP72BLY
CPA72BLY
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
CP72BLY Flat72 2
ExtendedAdhesive E
CPA72BLY Angled Straight
•RecommendedforinstallationswithlimitedrealestateandpotentialRFI/EMIinterference
•72portsin2RU
•Shieldedjackmoduleremovaltoolincluded
Built-in grounding lug helps bond panel to the rack
Write-on areas accept custom adhesive labeling
Stainless steel construction properly bonds shielded jack
Shielded
15visit www.panduit.com
QuickNet
QuickNet™ Patch Panels •DesignedtoworkwithPanduit’spreterminatedCopperandFibersystems•Highdensityavailableforareaswithlimitedrealestate•Forshieldedorunshieldedapplications
Part Number Design Ports RURecommended
SRB LabelLabel (see page 19)
QPP24BL
Flat
24
1
Extended
Adhesive/ QPPLC24
EQSP24BL^ Adhesive/
QPPLC24
QPP48HDBL48
— —QPP48HDVNSBL — —QSP48HDBL^ — —QAPP24BL
Angled
24
Straight
Adhesive/ QPPLC24
EQASP24BL^ Adhesive/
QPPLC24
QAPP48HDBL48
— —QAPP48HDVNSBL — —QASP48HDBL^ — —
^Shielded
QPP24BLQSP24BL^
QPP48HDBLQPP48HDVNSBL**
QSP48HDBL^
QAPP48HDBLQAPP48HDVNSBL**
QASP48HDBL^
QAPP24BLQASP24BL^
**Vertical numbering sequence
Part Number Category Ports Patch Panel Style RU LabelingLabel (see page 19)
CPPKL6ATG24WBL
6A
24 CPPL24WBLYFlat
1
A,B
CPPKL6ATG48WBL 48 CPPL24WBLY 2 A,B
CPPKLA6ATG24WBL 24 CPPLA24WBLYAngled
1 A,B
CPPKLA6ATG48WBL 48 CPPLA24WBLY 2 A,B
CPPK6G24WBL
6 24
CPP24WBLY
Flat
1
Adhesive A
CPPKL6G24WBL CPPL24WBLYPocket
A,B
UICMPPK6G24BL UICMPP24BLY E,G,H
CPPKA6G24WBL CPPA24WBL*Angled
Adhesive A
CPPKLA6G24WBL CPPLA24WBLYPocket
A,B
UICMPPKA6G24BL UICMPPA24BLY E,G,H
CPPKL5EG24WBL5e 24
CPPL24WBLYFlat 1 Pocket
A,B
UICMPPK5EG24BL UICMPP24BLY E,G,H
16 Representative offering only, visit www.panduit.com for complete listing of products.
Patch Panel Kits •Oneeasy-to-orderpartnumberwithallnecessarycomponents•Selectkitsavailableinflatorangledstyle,inmultiple performance levels
Category 5eCJ5E88TGBL
Category 6ACJ6X88TGBL
Category 6CJ688TGBL
Part Number Category Ports Patch Panel Style RU LabelingLabel (see page 19)
CP246X88BL 6A
24
CPP24WBLY
Flat 1 Adhesive ACP24688BL 6 CPP24WBLY
CP245E88BLY 5e CPP24WBLY
Category 6ACC6X88BLCategory 6CC688BL
Category 5eCC5E88BL
Coupler panels Supplied with preinstalled couplers
Unshielded Supplied with black Mini-Com®Giga-TX™ Jack Modules
Kits
* This patch panel only available in this kit
Category 6CJS688TGY
Part Number Category Ports Patch PanelIncluded
SRB Style RU LabelingLabel (see page 19)
CP24WSK6TGLGY
6 24
CP24WSLGY^ Integrated
Flat 1 Adhesive ACP24WSBBK6TGBL CP24BLYSRBBRCT-KIT
CP24WSBBK6TGLG CP24LGY^
Shielded Supplied with Mini-Com®Giga-TX™ Shielded Jack Modules and strain relief bars.
^ The color of this patch panel is light gray. All other panels are black.
17visit www.panduit.com
Cable for North America
Accessories
Straight
SRBS19BL-XY Straight strain relief bar. Package of 10.
SRBWCY Straight strain relief bar with clips
SRBM19BLY Straight strain relief bar with Tak-Ty ® Hook&Loop
Cable Ties
SRBCT Straight strain relief bar with cable ties
Extended
SRB19BLY Extended strain relief bar — 2"
SRB19D5BL Extendedstrainreliefbar—5"
SRB19D7BL Extendedstrainreliefbar—7"
SRB19MDBL Extendedmulti-depthstrainreliefbar—7"
SRBPBL Extended pivoting strain relief bar
SRBPPQBRKT Direct mount PP strain relief bar
Quick Release Bracket Kits
SRBBRKT Quick release brackets
SRBBRCT-KIT Quickreleasebracket+SRBwithcableties(SRBBRKT+SRBCT)
SRBBRM-KIT Quickreleasebracket+SRBwithTak-Ty® Cable Ties(SRBBRKT+SRBM19BLY)
SRBBRWC-KIT Quickreleasebracket+SRBwithclips(SRBBRKT+SRBWCY)
Strain Relief Bars
SRBBRCT-KIT
SRBBRM-KIT
SRBBRWC-KIT
SRBCT
SRBM19BLY
SRBBRKT
SRB19D5BL
SRB19BLY
SRB19MDBL
SRBPPQBRKT
SRBPBL
SRB19D7BL
SRBWCY
SRBS19BL-XY
18 Representative offering only, visit www.panduit.com for complete listing of products.
StandardBonding
GreenBonding
Black
Imperialsize#12-24x0.5"roundhead S1224-C RGTBSG-C RGTBS-C
Metricsize#M6-1.0mmx0.15mm CNWSM6-C RGTBSM6G-C RGTBSM6-C
Mounting Screws
FLBSIM-Y
TLBP1S-V, TLBP1R-V
TLBP2S-V, TLBP2R-V
DPFP1
DPFP2
DPFP4
DPFP8
CPAF2BL
CPAF1BL
CPATCBL
PEB1
PEB2
Accessories
Angled CoversCPATCBL Transitional cover
CPAF1BL Blankangledcover—1RU
CPAF2BL Blankangledcover—2RU
Flat CoversDPFP1 Blankflatcover—1RU
DPFP2 Blankflatcover—2RU
DPFP4 Blankflatcover—4RU
DPFP8 Blankflatcover—8RU
FLBSIM-Y Fulllengthblankingshade4-45RU
Tool-Less Blanking PanelsTLBP1S-V For3/8"cagenutholes—1RU
TLBP2S-V For3/8"cagenutholes—2RU
TLBP1R-V Fortappedrails—1RU
TLBP2R-V Fortappedrails—2RU
Extender BracketsPEB1 Converts 19" panels to 23" panels — 1 RU
PEB2 Converts 19" panels to 23" panels — 2 RU
19visit www.panduit.com
Unshielded
Part Number PortsOther Labeling
Solution
CPP24WBLY
24
ACPPL24WBLY A,BCPPL24M6BLY CCPPL24WRBLY A,BCPP24FMWBLY ACPPA24FMWBLY ACPPLA24WBLY A,BUICMPP24BLY E,G,HUICMPPA24BLY E,G,HCPP48WBLY
48
ACPPL48WBLY A,BCPPL48M6BLY CCPP48FMWBLY ACPPA48FMWBLY ACPPLA48WBLY A,BCPP48HDWBLY -CPPA48HDWBLY -CPP48HDEWBL E CPPA48HDEWBL EUICMPP48BLY E,G,HUICMPPA48BLY E,G,HCPPL72WBLY
MISC
DCPPLA72WBLY DCPP32WBLY ECWPP12WBL ACPP12WBL ACPP72FMWBLY ECPPA72FMWBLY E
ShieldedCP16BLY
16 FCP16WSBLYCP24BLY
24
A
CP24WSBLYCPA24BLYCP48BLY
48CP48WSBLYCPA48BLYCP72BLY
72E
CPA72BLYCP48HDBL
48HDCPA48HDBL
Labeling Options
Laser/Ink LS8 Thermal
A C252X030FJJ C252X030FJC C252X030YPT
B C261X035Y1J C261X035Y1C C261X035Y1TC C390X030Y1J C390X030Y1C C390X030Y1TD C282X030Y1J C282X030Y1C —E — T024X000VPC-BK T024X000FJTF C061X030Y1J C061X030FJC C061X030YPTG — UILS8BW —H UILJ4 —
■ Adhesive
StandardBonding
GreenBonding
Black
Imperialsize#12-24x0.5"roundhead S1224-C RGTBSG-C RGTBS-C
Metricsize#M6-1.0mmx0.15mm CNWSM6-C RGTBSM6G-C RGTBSM6-C
Labels
Permanent labeling is critical for all network cabling system installations. Panduit labeling solutions provide clean and efficient labeling of the network physical infrastructure in accordancewithTIA/EIA-606-B.
Part Number Description
TDP43ME 300dpiprinter;includesprinter,Panduit ® Easy-Mark™LabelingSoftware,RMEH4BLhybridblackribbon, AC power adapter with US powercord,USBcable,usermanual,quickstartcard,anddriverdisk.
TDP43ME
Part Number Description
LS8EQ IncludesLS8Eprinter,onecassetteofS100X150VACself-laminatinglabels,sixAAalkalinebatteriesandquickreference card.
LS8E
Part Number Description
LS8EQ IncludesLS8EQprinterwithQWERTYkeyboard,onecassetteofS100X150VACself-laminatinglabels,sixAAalkalinebattersandquickreference card.
LS8Q
©2014 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. COSG07--SA-ENG 10/2014
Real-World SolutionsWith a proven reputation for excellence and innovation, Panduit and our partners
work with you to overcome challenges and implement real-world solutions that
create a competitive business advantage. Panduit offers the broadest range of
solutions, from data centers and intelligent buildings to manufacturing operations,
to help you build a smarter, unified business foundation.
Technology LeadershipPanduit develops innovative physical infrastructure solutions that meet the rapidly changing needs of our clients, from hardware and software to advisory services. This commitment is supported by investment in advanced research, solutions-focused product development, world-class manufacturing, and collaboration with customers at the forefront of technology.
Partner EcosystemOur best-in-class partner ecosystem offers a comprehensive portfolio of services
that span the project lifecycle, from planning and design to delivery, deployment,
maintenance, and operation. Panduit business partners – distributors, and certified
architects, consultants, engineers, designers, system integrators, and contractors –
are qualified to help you achieve your objectives and realize predictable and
measurable results.
Strategic AlliancesPanduit cultivates long-term strategic alliances with industry leaders, including
Cisco Systems, EMC, IBM, and Rockwell Automation, to develop, optimize, and
validate solutions for our customers. This investment in people and resources
helps solve our customers’ greatest business challenges.
Global Business CommitmentPanduit is committed to delivering a consistently high level of quality and service
the world over. With a presence in more than 100 countries, local Panduit sales
representatives and technical specialists offer guidance and support that bring
value to your business. Our global supply chain, which includes manufacturing,
customer service, logistics, and distribution partners, provides prompt response
to your inquiries and streamlines delivery to any worldwide destination.
SustainabilityWith a commitment to environmental sustainability, Panduit develops and
implements solutions that protect, replenish, and restore the world in which
we live. This commitment is demonstrated by Panduit’s LEED Gold certified
World Headquarters, leveraging the Unified Physical InfrastructureSM approach
to enable convergence of critical building systems to drive energy efficiency
and ongoing operational improvement.