Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and...

4
New Parts to fit SciCan STAT IM ® 2000 & 5000 Cassette Autoclaves! SECTION 10 PAGE 1506 UPDATED 04/13 CALL (800) 221-9723 • FAX (818) 882-7028 • EMAIL [email protected] • WEBSITE www.rpiparts.com ® The above parts are manufactured by Replacement Parts Industries, Inc. to fit SciCan STATIM ® equipment. All product names used in this document are trademarks or registered trademarks of their respective holders. Show 04/13 SCICAN Table Top Sterilizers Models: STAT IM ® 900, 2000 and 5000 Series RPI Part #SCP050 OEM Part #01-100568S (Invensys Pump - STATIM 2000)/01-101761S (Invensys Pump - STATIM 5000) PUMP KIT • 120Volts, 60Hz. • This Invensys brand pump will accommodate STATIM 2000 and 5000 with autoclave software R603 and older only • Includes all parts as shown Fits: Chassis Models: 2000 & 5000 RPI Part #SCP051 OEM Part #01-110445S (Ulka Pump - STATIM 2000)/ 01-110446S (Ulka Pump - STATIM 5000) PUMP KIT • 120Volts, 60Hz. • This Ulka brand pump will accommodate STATIM 2000 and 5000 with autoclave software R604 and above only • Includes all parts as shown Fits: Chassis Models: 2000 & 5000 RPI Part #SCT053 OEM Part #01-108816S METERING TUBE (290) • Use as replacement pump tube or as pump recovery tube • Size: 1/8" OD tubing x 5-1/2" lg. • Also included in: Pump Kit (RPI Part #'s SCP050 & SCP051) Fits: Pump to Boiler Models: 2000 & 5000 MOUNTING HARDWARE (x4) (x4) RPT083 (7 pcs) SCF034 ULKA BRAND PUMP SCT053 SPRING CLIP MOUNTING HARDWARE RPT083 (7 pcs) SCF034 RPT647 RPT373 INVENSYS BRAND PUMP SCT053 SPRING CLIP RPT647 RPT373 RPI Part #SCK059 OEM Part #01-101783S/ 01-109300S (Filter only) RESERVOIR CAP & FILTER • Includes all parts as shown Fits: Reservoir Assembly and Top Cover Models: 2000 & 5000 RPI Part #SCC060 OEM Part #01-101783S (Reservoir Cap & Filter) RESERVOIR CAP Fits: Top Cover Models: 2000 & 5000 RPI Part #SCF061 OEM Part #01-109300S FILTER Fits: Reservoir Assembly Models: 2000 & 5000 SCC060 SCF061 WATER FILTER (IN-LINE) (RPI Part #SCF034) BARB TEE (RPI Part #RPB703) FEMALE Q.C. FITTING (RPI Part #RPF428) DRAIN TUBING (RPI Part #RPK432) SILICONE TUBING (RPI Part #RPT373) CABLE TIE (3 pcs) (RPI Part #RPT083) CORD CLIP (RPI Part #ADC058) CABLE CLAMP (RPI Part #RPC701) CABLE HOLDER (RPI Part #RPC702) HEX NUT (RPI Part #RPH111) Upgrade your 2000 or 5000 with an RPI "Quick-Release Drain System"! To upgrade the 5000, just ask for these two RPI parts: • RPI Part #RPF428 - FEMALE Q.C. FITTING • RPI Part #RPK432 - DRAIN TUBING Upgrade the 2000! RPI Part #SCK037 OEM Part #01-108152S (Kit)/01-106637S (Kit) DRAIN KIT WITH PUMP FILTER Includes all parts as shown Fits: From the Reservoir to the Pump Filter to the Pump to the Drain Line Model: 2000 Upgrade the 5000! RPI Advantage! • Need for Pump Filter replacement is easily detected with RPI's Clear Tubing and Filter. • Draining is simplified with the addition of our Quick Release System – Just attach the tubing and you are ready to drain!

Transcript of Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and...

Page 1: Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and Rear Foot Models: 2000 & 5000 RPI Part #CAF011 OEM Part #(No OEM Part # Available)

New Parts to fit SciCan STATIM ® 2000 & 5000 Cassette Autoclaves!

SECTION

10PAGE

1506UPDATED04/13

CALL (800) 221-9723 • FAX (818) 882-7028 • EMAIL [email protected] • WEBSITE www.rpiparts.com

®

The above parts are manufactured by Replacement Parts Industries, Inc. to fit SciCan STATIM® equipment. All product names used in this document are trademarks or registered trademarks of their respective holders. Show 04/13

SC

ICA

NTable Top Sterilizers

Models: STATIM® 900, 2000 and 5000 Series

RPI Part #SCP050OEM Part #01-100568S (InvensysPump - STATIM 2000)/01-101761S(Invensys Pump - STATIM 5000)

PUMP KIT• 120Volts, 60Hz.• This Invensys brand pump will accommodate

STATIM 2000 and 5000 with autoclave software R603 and older only

• Includes all parts as shownFits: Chassis Models: 2000 & 5000

RPI Part #SCP051OEM Part #01-110445S (Ulka Pump -STATIM 2000)/ 01-110446S (Ulka Pump -STATIM 5000)

PUMP KIT• 120Volts, 60Hz.• This Ulka brand pump will accommodate

STATIM 2000 and 5000 with autoclave software R604 and above only

• Includes all parts as shownFits: Chassis Models: 2000 & 5000

RPI Part #SCT053OEM Part #01-108816S

METERING TUBE (290)• Use as replacement pump tube or as pump recovery tube• Size: 1/8" OD tubing x 5-1/2" lg. • Also included in: Pump Kit (RPI Part #'s SCP050 & SCP051)Fits: Pump to BoilerModels: 2000 & 5000

MOUNTING HARDWARE

(x4)

(x4)

RPT083(7 pcs)

SCF034

ULKA BRAND PUMPSCT053

SPRING CLIP

MOUNTING HARDWARERPT083(7 pcs)

SCF034

RPT647RPT373

INVENSYS BRAND PUMPSCT053

SPRING CLIP

RPT647RPT373

RPI Part #SCK059OEM Part #01-101783S/01-109300S (Filter only)

RESERVOIR CAP & FILTER• Includes all parts as shownFits: Reservoir Assembly and Top CoverModels: 2000 & 5000

RPI Part #SCC060OEM Part #01-101783S(Reservoir Cap & Filter)

RESERVOIR CAPFits: Top CoverModels: 2000 & 5000

RPI Part #SCF061OEM Part #01-109300S

FILTERFits: Reservoir AssemblyModels: 2000 & 5000

SCC060

SCF061

WATER FILTER (IN-LINE)(RPI Part #SCF034)

BARB TEE (RPI Part #RPB703)

FEMALE Q.C. FITTING (RPI Part #RPF428)

DRAIN TUBING (RPI Part #RPK432)

SILICONE TUBING(RPI Part #RPT373)

CABLE TIE (3 pcs) (RPI Part #RPT083)

CORD CLIP(RPI Part #ADC058)

CABLE CLAMP(RPI Part #RPC701)

CABLE HOLDER(RPI Part #RPC702)

HEX NUT(RPI Part #RPH111)

Upgrade your 2000 or 5000 with an RPI "Quick-Release Drain System"!

To upgrade the 5000, just ask for these two RPI parts:• RPI Part #RPF428 - FEMALE Q.C. FITTING• RPI Part #RPK432 - DRAIN TUBING

Upgrade the 2000!RPI Part #SCK037OEM Part #01-108152S (Kit)/01-106637S (Kit)

DRAIN KIT WITH PUMP FILTER• Includes all parts as shownFits: From the Reservoir to the Pump Filter tothe Pump to the Drain LineModel: 2000

Upgrade the 5000!

RPI Advantage!• Need for Pump Filter replacement is easily detected with RPI's Clear Tubing and Filter. • Draining is simplified with the addition of our Quick Release System – Just attach

the tubing and you are ready to drain!

Page 2: Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and Rear Foot Models: 2000 & 5000 RPI Part #CAF011 OEM Part #(No OEM Part # Available)

®

Models: STATIM® 900, 2000 and 5000 Series (continued)

Page 2

RPI Part #SCK038OEM Part #01-100570S

PROBE BRACKET KIT • Includes: (2 pcs) Compression

Sleeve (RPI Part #RPF215), (2 pcs) Compression Nut (RPI Part#RPF219), (2 pcs) Copper Tubing,Probe Bracket (RPI Part #SCB039),Microswitch Kit (RPI Part #SCK007)& Thermocouple (RPI Part #SCT03O)

Fits: Cassette Bay (Armature)Model: 2000

RPI Part #SCK042OEM Part #01-101618S

PROBE BRACKET KIT • Includes: (2 pcs) Compression

Sleeve (RPI Part #RPF215), (2 pcs) Compression Nut (RPI Part#RPF219), (2 pcs) Copper Tubing,Probe Bracket (RPI Part #SCB043),Microswitch Kit (RPI Part #SCK007)& Thermocouple (RPI Part #SCT03O)

Fits: Cassette Bay (Armature)Model: 5000

RPI Part #SCB039OEM Part #01-100570S (Complete Assy)

PROBE BRACKET • Probe Bracket allows replacement of damaged

steam ports or spring bar without replacing thethermocouple and microswitch

• Includes all parts as shown• Also available: Alignment Tool (RPI Part #SCT052)

& Hex Balldriver (9/64") (RPI Part #RPT836)Fits: Cassette Bay (Armature)Model: 2000

RPI Part #SCB043OEM Part #01-101618S (Complete Assy)

PROBE BRACKET • Probe Bracket allows replacement of damaged

steam ports or spring bar without replacing thethermocouple and microswitch

• Includes all parts as shown• Also available: Alignment Tool (RPI Part #SCT052)

& Hex Balldriver (9/64") (RPI Part #RPT836)Fits: Cassette Bay (Armature)Model: 5000

Cut Here

To Open

RPI Part #RPS287LIQUID SOAP

To be used only as directed withCassett Seal (RPI Part #SCS001)

For installation andregularly scheduledmaintenance, gener-ously lubricate cassettseal using entire con-tents of one packet.Dispose of packetafter use.

e

Cut Here

To Open

RPI Part #RPS287LIQUID SOAP

To be used only as directed withCassett Seal (RPI Part #SCS001)

For installation andregularly scheduledmaintenance, gener-ously lubricate cassettseal using entire con-tents of one packet.Dispose of packetafter use.

e

Cut Here

To Open

RPI Part #RPS287LIQUID SOAP

To be used only as directed withCassett Seal (RPI Part #SCS001)

For installation andregularly scheduledmaintenance, gener-ously lubricate cassettseal using entire con-tents of one packet.Dispose of packetafter use.

e

Cut Here

To Open

RPI Part #RPS287LIQUID SOAP

To be used only as directed withCassett Seal (RPI Part #SCS001)

For installation andregularly scheduledmaintenance, gener-ously lubricate cassettseal using entire con-tents of one packet.Dispose of packetafter use.

e

RPS287 (1 pc)

(x4)

(x5)

(x2) (x2) (x4)

(x5)

(x2) (x2)

(x4)(x4)

SCG010SCG010

RPS287 (1 pc)

RPI Part #SCG010OEM Part #01-100865S

PROBE BRACKET GASKET• Size: ~2.19" x 3.38" x .12" Thk.Fits: Cassette Bay (Armature)Models: 2000 & 5000

RPI Part #SCK007OEM Part #01-100571S (2000)/01-101621S (5000)

MICROSWITCH KIT• Includes all parts as shown; Also available:

Hex Balldriver (5/64") (RPI Part #RPT297) Fits: Probe Bracket Models: 2000 & 5000

RPT083 (6 pcs)

RPS381

RPH253 (2 pcs) ADS120 (2 pcs)

SWITCH

RPI Part #SCT030OEM Part # (No OEM Part # Available)

THERMOCOUPLE• Includes all parts as shownFits: Probe BracketModels: 2000 & 5000

RPT083 (5 pcs)

REDUCERFITTING

RPI Part #RPS639OEM Part # (No OEM Part # Available)

SILICONE GASKET MAKER 598 (.5 fl. oz.)• Material: RTV black silicone• Use to seal Microswitch

to Probe BracketModels: 2000 & 5000

NET WT .5 OZ. (14 g)

RPI Part #SCK048OEM Part #01-109128S

COPPER TUBING KIT• Includes all parts as shownFits: Probe Bracket to Boiler, Solenoid Valveand Alex Upgrade KitModel: 2000

RPI Part #SCK049OEM Part #01-109129S

COPPER TUBING KIT• Includes all parts as shownFits: Probe Bracket to Boiler, Solenoid Valveand Alex Upgrade KitModel: 5000

RPF215(4 pcs)

RPF219(4 pcs)

RPF215(4 pcs)

RPF219(4 pcs)

RPI Part #SCT052OEM Part #01-106776S (Probe Alignment Jig)

ALIGNMENT TOOL• Size: 1.50" x .31" x .25"• Also included in: RPI Field

Service Smart Kit® (RPI Part #SCK028)Fits: Cassette to Probe Bracket

Also available: Alignment Tool (RPI Part #SCT052)& Hex Balldriver (9/64") (RPI Part #RPT836)

Also available: Alignment Tool (RPI Part #SCT052)& Hex Balldriver (9/64") (RPI Part #RPT836)

Easily align the ProbeBracket Steam Portsto Cassette

SCT052

Page 3: Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and Rear Foot Models: 2000 & 5000 RPI Part #CAF011 OEM Part #(No OEM Part # Available)

RPI VOLTAGE MAXPART # DESCRIPTION AWG RATING INSULATION TEMPRPW382* Hook Up Wire (Black) #14 600V Polyolefin 257˚FRPW805* Hook Up Wire (White) #14 600V Polyolefin 257˚FRPW806* Hook Up Wire (Grn/Yel) #14 600V Polyolefin 257˚FRPW813 Hook Up Wire (Black) #22 600V PVC 221˚FRPW814 Hook Up Wire (White) #22 600V PVC 221˚FRPW815 Hook Up Wire (Grn/Yel) #22 600V PVC 221˚F* Non-Teflon®

®

Models: STATIM® 900, 2000 and 5000 Series (continued)

Page 3

RPI Part #SCK040OEM Part #01-109671S

KEYPAD Model: 5000 Model #01-201103

RPI Part #SCK041OEM Part #01-109680S

KEYPAD • 1 set of 2 piecesModel: 2000 Model #121101(New type, two piece style)

RPI Part #SCK015OEM Part #01-101707S

KEYPADModel: 2000 Model #101102 (Old type, one piece style with S/N's ending with an “A”)

RPP819 (1 pc)

SCD063RPP819 (1 pc)

RPP819 (1 pc)RPI Part #SCA022OEM Part #01-104382S/01-104381S (Display only)/01-109494S (Display only)

DISPLAY ASSEMBLY• Can be used in all

versions of the STATIM2000 and 5000.

• Includes all parts as shownFits: Facia CoverModels: 2000 & 5000

RPI Part #SCD063OEM Part #01-106950S

LCD DECALFits: Facia CoverModel: 2000 Model #121101

RPI Part #SCK062OEM Part #01-104381S(Display only)/01-109494S(Display only)

LCD KIT• Includes all parts as shownFits: Facia CoverModel: 2000 Model #121101

RPI Part #RPP819OEM Part # (No OEM Part # Available)

MOUNTING PAD - 10/PKG• Size: 3/4" x 3/4" x 1/16" Thk.• Double-sided adhesive foam – Attaches

the keypad ribbon cable to display ribboncable making it easier to install top cover!

Models: 2000 & 5000

RE

MO

VE

TH

IS L

AB

EL

SE

RIE

S S

TE

LIZ

ER

FO

R U

SE

WIT

H 5

000

LE

AV

E T

HIS

LA

BE

L O

NS

ER

IES

ST

ER

ILIZ

ER

FO

R U

SE

WIT

H 2

000

SCD063

SCA022

(x4)

(x4)

RPP819(1 pc)

RPP819(1 pc)

RPI Part #SCG044OEM Part #01-101650S

FACIA GASKET• Size: ~4.35" x 8.81"Fits: Facia CoverModel: 5000

RPI Part #SCF006OEM Part #01-104461S/10-106462S

DOUBLE THERMAL FUSE ASSEMBLY• Includes all parts as shown• Can be used on single fused steam generator/boilersFits: Steam Generator/BoilerModels: 900, 2000 & 5000

ADS054 RPT083(5 pcs)

RPI Part #SCK011OEM Part #01-100574S/01-101627S

CHECK VALVE KIT• Includes all parts as shownFits: Steam Generator/Boiler to the AirCompressorModels: 2000 & 5000

RPT480 (2 pcs)RPA369

CHECK VALVERPT373

Service Tip: The OEM recommends replacing theCheck Valve every 2 years

RPI Part #RPT647OEM Part # (No OEM Part # Available)

TUBING (CLEAR 1/2" ID x 11/16" OD - PVC)• Sold by the foot (reel NOT included)Fits: 2000 Pumps; and 5000 Medo AirCompressor and Filter (RPI Part #SCF031)Models: 2000 & 5000

RPI Part #RPH817OEM Part # (No OEM Part # Available)

SCREW (#8-32 x .500 SEMS)• 25 per package• Size: #8-32 x 1/2" lg. with

captive external lockwasherFits: Cover, Solenoid Valve Mounting Bracket,Steam Generator/Boiler to Bracket, STATIM 5000Air Compressor Mounting Bracket and Rear FootModels: 2000 & 5000

RPI Part #CAF011OEM Part # (No OEM Part # Available)

RUBBER FOOT - 4/PKG• Material: Black rubber with

molded in steel washer Fits: Base PlateModels: 2000 & 5000

HOOK UP WIRE (sold by the foot) - Models: 900, 2000 & 5000

Page 4: Models: STATIM New Parts to fitSciCanSTATIM 2000 & 5000 ... · Air Compressor Mounting Bracket and Rear Foot Models: 2000 & 5000 RPI Part #CAF011 OEM Part #(No OEM Part # Available)

PRESORTED STANDARDU.S. POSTAGE PAID

VAN NUYS, CAPERMIT NO. 2399

20338 Corisco Street • Chatsworth, California • 91311

ADDRESS SERVICES REQUESTED

Page 4

RPI Part #SCA046OEM Part #8OZPLUS (Stat-Dri Plus™)/ 32OZPLUS (Stat-Dri Plus™)

SCI-DRY™ (16 oz. REFILL)• Drying and rinse agent• Also available by the case of 12 bottles! Just ask for

SCI-DRY™ (16 oz. Refill - Case) (RPI Part #SCA047)Models: 2000, 5000 & 7000 series cassette sterilizers; and Hydrim® series washers

RPI Part #SCA054OEM Part #2OZPLUS (Stat-Dri Plus™)/ 8OZPLUST (Stat-Dri PlusT™)

SCI-DRY™ (2 oz. spray bottle)• Drying and rinse agent• Also available by the case of 12 bottles! Just ask

for SCI-DRY™ (2 oz. - Case) (RPI Part #SCA055)Models: 2000, 5000 & 7000 series cassette sterilizers

RPI Part #RPK791OEM Part # (No OEM Part # Available)

CLEANING KIT• Includes all parts as shown• All items also sold separately

RPC799

RPP798 (x3) RPS797

RPB792

RPB793

RPB794

RPB795 RPB796

RPI Part #RPS821OEM Part # (No OEM Part # Available)

CALIBRATION SOLUTION• 4 pouches per package (20ml

pouches); Use to verify calibration of Water Quality Tester (RPI Part #RPT820)

Models: 2000 & 5000

RPI Part #RPT820OEM Part #01-103139S

WATER QUALITY TESTER• Size: 5.9" x 1.2" x 0.8"• Also available: Calibration

Solution (RPI Part #RPS821) Models: 2000 & 5000

TDS1

RPI Part #SCK028OEM Part # (No OEM Part # Available)

FIELD SERVICE SMART KIT®

• This exclusive Kit includes the most often utilized instruments for servicingand repairing Scican STATIM Cassette Autoclaves Models 2000 and 5000.Plus, this Kit includes RPI's A Guide to Maintaining the SciCan STATIMCassette Autoclave, an essential booklet offering troubleshooting and servicetips, error code descriptions, detailed exploded views and more!

• Includes RPI's new maintenance Guide plus:- Alignment Tool (RPI Part #SCT052)- Calibration Solution (1 pouch) (RPI Part #RPS821)- Carrying Case (RPI Part #RPC476)- Cassette Seal Removal Tool (RPI Part #RPT372)- Extension Test Cable (RPI Part #SCT026)- Hex Balldriver (5/64") (RPI Part #RPT297)- Hex Balldriver (9/64") (RPI Part #RPT836)- Liquid Soap (RPI Part #RPS287)- Pump Tester Bottle Kit (RPI Part #SCK024)- Spanner Nut (RPI Part #RPT364)- Start Switch (RPI Part #SCS021)- Threadlocker 545 (RPI Part #RPA369)- Water Quality Tester (RPI Part #RPT820)

Models: 2000 & 5000

FILL LINE

MIN

IMU

M

L

5 i

O

v

CeIT

45 d hes

A

TESTH O

PURE2

Includes the NewParts shown aboveand a New Guide!

All Parts Also Sold Separately!

RPI Part #RPT836OEM Part # (No OEM Part # Available)

HEX BALLDRIVER (9/64")• 9/64" Ball-Point Hex Driver• Size: ~10.50" lg. with plastic

handle; ~6.90" lg. alloy steel blade• Easily access OEM or RPI probe

bracket mounting screws foradjustment or replacement withoutremoving other components.

Models: 2000 &5000

RPI Part #SCT052OEM Part #01-106776S(Probe Alignment Jig)

ALIGNMENT TOOL• Size: 1.50" x .31" x .25"Fits: Cassette to Probe Bracket Models: 2000 & 5000