Ordering Information1 SN 100 H 24

Model Lenght Power Color Temp. Optics Voltage

SN 100 H 273040RGB

LL 24

*SN- Min order quantity 9pcs

*Max run from single feed 6m (23’)

SNAKE Specification Sheet

Luminairen Radius, min R 314mm

n Uplight effect

n UL STD 1598, wet location, IP67, walk-over rated 500kg (1000 lb)

n Remote power supply

n Tempered glass 2x8mm thick

n Stainless steel 304 construction

n Direct concrete pour ABS installation hous-ing

n Snap in installation with no exposed hard-ware

n Supplied with oil and water resistant 0.18mm (7’) feed cable standard

n IP67 plug and play connector

Size

n 124mm (4.88”), 33.6mm (1.32” ),

90mm H (3.54” )

Powern H - 2.3W 2700K - 4000K, 222 lm

n H - 2.3W RGB

Color Temperaturen 27 - 2700K

n 30 - 3000K

n 40 - 4000K

n RGB

n 2 Step MacAdam

n CRI: > 85

Opticsn LL - line of light

Voltage

n 24 - 24Vdc fixture voltage

Installation housing order code

n SN335

Cable options

Jumper Cable

n 102796 - L= 1m

Lead Cable

n 102233 - L= 1m

34.08mm(1.34”)

h 89.1mm(3.53”)

34.08mm (1.34”)

121.

36

mm

(4

.78

”)

Power SupplyOn/Off

103233 - OT60 24V P

103196 - OT130 24V P

103234 - OT250 24V P

Power Supply integrated controls

102345 - ELDOLED Linear 100S (DXM,DALI+PS)

103502 - OT 210/220-240 /1-4CH - DALI

103507 - OT250/220...240/ 24V DIM P (1-10V)

International: +385 52 255 324 filixlighting.com info@filixlighting.comEurope/GmbH: info@filixlighting.comEurope MENA: info@filixlighting.com North America: filixlighting.com info@filixlighting.com Filix reserves the right to make technical changes without notice. 1

Click here for voltage drop and distances.

Applicationn Architectural and landscape lighting

n Curved uplight applications

n Linear marker light

n Gravel, soil or concrete

n UL STD 1598, IP67, Wet location

SNAKE Dimensions

Fixtu

reD

imm

ensio

ns

314mm

(12.36”)

Installatio

n

Min. possible circle

80.00mm (3.15”)

90mm(3.54”)

34.1mm(1.34”)

Housing

Drainage

Concrete

Drainage pipe or drainage layer

146 mm(5.75”)

115 mm(4.53”)

17 mm(0.67”)

80mm(3.15”)

90mm(3.54”)

34.08mm (1.34”)

International: +385 52 255 324 filixlighting.com info@filixlighting.comEurope/GmbH: info@filixlighting.comEurope MENA: info@filixlighting.com North America: filixlighting.com info@filixlighting.com Filix reserves the right to make technical changes without notice. 2

Wirin

g d

iagram

s

Qty. Part Number Description CaseNominal Input

Voltage (V)Nominal Input

Current (A)Power Factor

Output Power Range (W)

Location Rating

Range

D2024120 20W 24Vdc 120V 1 120 0.38 0.5 0.9-20 Dry -20°C – +50°C

D7524UNV 75W 24V UNV 2 120 to 277 0.99 0.99 0.9-75 Damp -25°C – +60°C

D9624UNV 96W 24V UNV 2 120 to 2770.970.39

0.9 1-96 Damp -20°C – +40°C

Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).

Qty. Part Number Description CaseNominal Input

Voltage (V)Nominal Input

Current (A)Power Factor

Output Power Range (W)

Dimming Mode

Dimming Control

Dimming Range

Location Rating

D9624UNVD1 96W 24V UNV DIM 1 120 to 2770.970.39

0.9 1-96 PWM 0-10V DC 10 –100% Damp

D4024120D2K or D4024120D2M

Hi-Lume A Series LED LTE (case k or m)

2/3 120 - - 5-40 PWMForward phase

with neutral1 –100% Dry

D4024UNVD3K or D4024UNVD3M

Hi-Lume A Series LED L3D (case k or m)

2/3 120 to 277 - - 5-40 PWM3-Wire or

Ecosystem® 1 –100% Dry

Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).

Non Dimming Drivers

Dimming Drivers

Case d

imen

sion

s

9.48" (241mm)

8.94" (227mm)

1.17" (30mm)

1.68" (43mm)

YELLOW

24V DC (+)

Return (-)

DIM Return (-)

Black (L)

White (N)VOLTAGE120-277 V AC50/60Hz Pout (max): 96 W

Vout: 24VDCIout: 0.04-4ADC

RED

Gray (-)

Purple (+)

0-10 V DC

InputBLUE

n.c.

2.36"(60.0mm)

2.20"(56mm)

2.20"(56mm)

2.36"(60mm)

24VDC+ –

LoadLoad side: use 30 to 14 AWG wire

Line side: use 20 to 12 AWG wire

Line

N L

1.20"(31mm)

Red(+)

Blue(-)

Black (L)

White (N)

VOLTAGE120-277 VAC50/60Hz

Input

24V DC Output

(+)

(-)

Black (L)

White (N)

VOLTAGE120 VAC50/60Hz

Input

24V DC Output

9.48" (241mm)

8.94" (227mm)

1.17" (30mm)

1.68" (43mm)

YELLOW

24V DC (+)

Return (-)

DIM Return (-)

Black (L)

White (N)VOLTAGE120-277 V AC50/60Hz Pout (max): 96 W

Vout: 24VDCIout: 0.04-4ADC

RED

Gray (-)

Purple (+)

0-10 V DC

InputBLUE

n.c.

2.36"(60.0mm)

2.20"(56mm)

2.20"(56mm)

2.36"(60mm)

24VDC+ –

LoadLoad side: use 30 to 14 AWG wire

Line side: use 20 to 12 AWG wire

Line

N L

1.20"(31mm)

Red(+)

Blue(-)

Black (L)

White (N)

VOLTAGE120-277 VAC50/60Hz

Input

24V DC Output

(+)

(-)

Black (L)

White (N)

VOLTAGE120 VAC50/60Hz

Input

24V DC Output

1. 20W 2. 75W + 96 W

Case d

imen

sion

s4.2"

(106.7mm)

1.0"(25.4mm)

3.0"(76.2mm)

4.9"(124.45mm)

4.6"(116.8mm)

1.18"(29.9mm)

0.98"(24.9mm)

14.13"(358.9mm)

13.78"(350.0mm)

9.48"(240.8mm)

8.94"(227.1mm) 1.17"

(29.7mm)

1.68"(42.7mm)

1. 96W 2. Hi-Lume (case K) 3. Hi-Lume (case M)

9.48"

8.94" 1.17"

1.68"

Black (L)

Power SupplyWhite (N)

2.36"

2.20"

2.20"

2.36"

24VDC+ –

LoadLoad side: use 30 to 14 AWG wire

Line side: use 20 to 12 AWG wire

Line

N L

1.20"

(+)

(-)

Wirin

g d

iagram

s

96W L3D (3-wire)LTE (forward phase with neutral) L3D (Ecosystem®)

20W, 75W, 96 WSuggested wiring size*

Load per driver≤48W ≤72W ≤96W

Wir

e ga

uge

#18AWG 37’ 25’ 18’

#16AWG 59’ 39’ 29’

#14AWG 95’ 63’ 47’

#12AWG 151’ 101’ 75’

#10AWG 241’ 160’ 120’* Voltage drop guide for 24VDC. Actual Voltage drop to be calculated by installer.

SQ100 Deco Power Supplies

410 381 1497 inter-lux.com answers@inter-lux.comInter-lux reserves the right to make technical changes without notice. # 930-3007 (ref 0) 3

Wiring Diagram for 3-Wire Control Wiring Diagram for EcoSystem® Digital Control

Dimmed Hot (Orange)

Switched Hot (Black)

Neutral (White)

Ground (Green) Ground

+V

-V

To 3

-wire

Dim

min

g C

ontr

ol

Hi-lume®A-Series

Switched Hot (Black)

Neutral (White)

Ground (Green)

E1 (Purple)

E2 (Purple)

LED lightengine

To E

coSy

stem

®D

igita

l Lin

kTo

Lin

eVo

ltag

e

Note: Colors shown correspond to terminal blocks on driver.

Ground

+V

-V

Hi-lume®A-Series

LED lightengine

Wiring Diagram for Forward Phase Control

Note: Colors shown correspond to terminal blocks on driver.

Dimmed Hot (Black)

Neutral (White)

Ground (Green)

To F

orw

ard

Phas

e C

ontr

ol

Ground

+V

-V

Hi-lume®A-Series

LED lightengine

Black (L)

Power Supply

White (N)

Purple (+)

Gray (-)

(+)

(-)

RGB Control Interface Details

Qty. Part Number DescriptionNominal Input

Voltage (V)Maximum Outputper channel (W)

Output Power Range (W)

Controls (By Others)

CORGBSEQ OT RGB Sequencer 24 48 96 (1-3) 0-10V dimmer(s)

CORGBDMX OT DMX RGB 24 48 96 DMX controller

Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).

0.79"(20.0mm)

1.65" (41.9mm)

0.14"(3.6mm)

6.77"(172.0mm)

6.77"(172.0mm)

OT RGB SEQUENCER

LED Modules

24VDC

RGB

+++

+

+ Speed+ Dim+ Prog.

1-10V;

<0.6mA

(1-3) 0-10V DIMMERS (by others)

OT DMX RGB

LED Modules

10 - 24VDC

RGB

+

+

+

DMX Controller (by others)

GRD Data Data+

+

DMX-Control Address

1

2

3

RGB Control Interface case dimensions (Sequencer and DMX) Maximum wiring distance*

Load per color

≤48W

Wir

e ga

uge

#18AWG 37’

#16AWG 59’

#14AWG 95’

#12AWG 151’

#10AWG 241’* Voltage drop guide for 24VDC. Actual Voltage drop to be calculated by installer.

OT RGB Sequencer

RGB Fixture 1

DMX Controller (by others)

Power Supply

(+)

R

G

B

RGB Fixture 2

RGB Fixture 1

(+)

R

G

B

RGB Fixture 2

OT DMX RGB

Power Supply

OT RGB Sequencer

RGB Fixture 1

DMX Controller (by others)

Power Supply

(+)

R

G

B

RGB Fixture 2

RGB Fixture 1

(+)

R

G

B

RGB Fixture 2

OT DMX RGB

Power Supply

OT RGB Sequencer

RGB color changing and dimming interface controlled by (3) 0-10v dimmers.First dimmer controls speed of color change.Second dimmer dims the 3 outputs (RGB) together.

Third dimmer selects one of the 8 pre-programmed color sequences.All 3 dimmers are required for full functionality or 1 or 2Can be used for specific functionality

See installation / driver instructions for details. Must order power supply separately

OT DMX RGB

DMX-controllable addressable interface. Address is assigned with 3 rotary channel selectors. Selection is made only for the first of the three channels desired.

The assigned address will control a set of three consecutive addresses. For example, if address #1 is selected, #1 controls the red leds output, #2 controls the blue leds output and #3 controls the green leds output.

See installation / driver instructions for details. Must order power supply separately

SQ100 Deco RGB Interface

410 381 1497 inter-lux.com answers@inter-lux.comInter-lux reserves the right to make technical changes without notice. # 930-3007 (ref 0) 4