MODEL 3000 again for ‘09
Transcript of MODEL 3000 again for ‘09
![Page 1: MODEL 3000 again for ‘09](https://reader033.fdocuments.us/reader033/viewer/2022042713/6266f66decfc456fd01c9258/html5/thumbnails/1.jpg)
❒ Efficient Photo-Fiber-Optic sensor coupled with precision quartz crystal controlled electronics
provide accurate repeatable data in most flow conditions.
❒ The Model 3000 Indicator displays data in feet and meters per second. Toggle the 0 key at the
main screen to change from one to the other.
❒ Velocity averaging is fully user adjustable. Anything from 1 to 999 seconds of averaging can be
chosen. The Model 3000 automatically powers up using your last averaging time period. If you
use 40 seconds, it stays at 40 seconds until you change it.
❒ Velocities can be a single averaged measurement or can be the accumulated average of as many
measurements as desired, all controlled from the keypad.
❒ Sensor components (propeller, rotor, and rotor shaft) are easily and inexpensively replaceable.
Carry spares into remote locations and you’ll never have to return early because of a bent
propeller or bucketwheel, or a lost propeller magnet or rotor shaft.
❒ Wide choice of sensor carriers or “wands” to accommodate virtually any open stream velocity
measuring requirement.
❒ Indicator keys are color coded, grouping related functions into like colors.
❒ Lightweight, portable system is easy to work with all day in the field. Model 3000 Indicator
uses the same rugged, weatherproof instrument housing as the earlier Model 2100 and Model
2200 but with added water incursion protection and data storage features.
❒ A simple and accurate method of user-accomplished calibration is provided with the Model
3000. No other current meter provides the user a method of checking and changing
calibrations in the field.
❒ Calibration settings for 10 different sensors/propellers can be stored in the indicator and the
Model 3000 is completely compatible with all earlier Swoffer Instruments’ sensors (Models
1000, 2000, 2100 and 2200).
❒ The Model 3000 is also specifically designed to function also with Price type AA & Pygmy
current meters using either the optical adapters pioneered by Swoffer Instruments in the Models
2200 and USGS-HIF Optic-Head sensors or with meters using the newer magnetic head
contactors. The Model 3000 can in fact be field calibrated to operate with any sensor that uses a
contact closure signal system.
❒ Prompts on the Model 3000 liquid crystal display assist the user through all operations; from
simple velocity measurements to discharge flow computations.
❒ On-board clock time-stamps data collected while in the Discharge Mode. (Month, day, year, hour
& minutes). Data units (feet or meters) is also saved and uploaded with file transfers.
❒ In the Discharge Mode as many as 1000 “stations” in from 1 to 100 stream cross-sections can be
acquired and stored in memory. Station No. (width) and station depth are entered directly by the
keypad and velocity and flow is computed by the Model 3000.
❒ If stations have velocities at an angle other than perpendicular to the stream cross-section
the angle can be input by keypad. The Model 3000 then applies a cosine correction for that
Station; necessary for using the Model 3000 with vertical axis current meters only.
❒ The accumulated discharge for a transect can be computed and displayed at any time during
or after a transect. Individual Stations in a transect can be added or deleted as desired and
each component of a station (Station No., Depth, Velocity and Angle) can also be edited.
❒ All discharge data in the Model 3000 can be transferred to a Personal Computer via USB for
further processing. Simple file transfer software and a USB connection cable is provided.
MODEL 3000Current meter, Flow Calculator - Datalogger
SWOFFER INSTRUMENTS, INC.
The new Model 3000 is a hand held computer and data logger designed specifically for the measurement of open channelvelocities and the on-site computation of stream discharges (flow). Features Include:
The Model 3000 Indicator is a datalog-ging version of the Model 2100, allow-ing the operator to input all measure-ment data usually kept on a clipboardwhile crossing a stream. The Model3000 records depths, widths, velocitiesand angles along with time & date ofmeasurements. It figures the “Q” andcan upload all this information in spread-sheet-acceptable format to your PC forfurther study and record keeping. Itupdates and is fully compatible with allprevious Swoffer instruments.
Model 3000 Indicator
Improved
again for ‘09 !
30cbt_09
Model 3000 with optional sensors
![Page 2: MODEL 3000 again for ‘09](https://reader033.fdocuments.us/reader033/viewer/2022042713/6266f66decfc456fd01c9258/html5/thumbnails/2.jpg)
30cbt_09
MODEL 3000 CURRENT METER SPECIFICATIONS *
VELOCITY RANGE 0.1 to 25 Feet Per Second (propeller meters)
(0.03 to 7.5 Meters Per Second )
DISPLAY Two line by 16 character Liquid Crystal Digital.
RESOLUTION To three decimals, both feet and meters.
ACCURACY Can be held to within 1% with periodic user-
required calibration tests and adjustments.
DISPLAY AVERAGING User adjustable from 1 to 999 seconds. Remains
unchanged with each power-up until purposely
reset. Velocities obtained within each sampling
period can be averaged with successive periods .
OPERATING TEMPERATURE LCD Min. -4° F (-20°C)
Max. 158°F (70°C)
Sensor Min. 0° F (-17.8°C)
Max. 194° F (90°C)
POWER REQUIRED Four AA batteries. Alkaline or rechargeable nicads.
INDICATOR SIZE 4 by 6 by 2 inches (15.2 by 10.2 by 5.1 cm)
INDICATOR WEIGHT 25 oz. (including 4 AA batteries).
INDICATOR MATERIAL Vacuum-formed ABS with a clear acrylic viewing
lens over the LCD.
INDICATOR KEYPAD Back-printed polycarbonate in four colors plus
black. Tactile feedback membrane type contacts
with minimum actuation pressure required for long
life and water resistance.
FASTENERS Stainless Steel & Brass.
SENSOR WAND MATERIALS Aluminum = 6061-T6, Stainless Steel = #303
SENSOR BODY AND ROTOR Acetron GP (rotor body) & Ertalyte® TX, an
internally lubricated thermoplastic polyester that
provides enhanced wear over all previous rotor
materials.
SENSOR PROPELLER Glass-filled nylon. 2" diameter is supplied. Other
sizes are available for special applications.
ELECTRICAL CONNECTION Polyurethane jacketed, Kevlar core, high strength
cable. Two-conductor sensor signal system.
Circular plastic,water resistant connector with twist-
lock operation. Connections use gold plated
contacts.
CABLE LENGTH Equal to wand at full extension plus five feet.
Special lengths to 1000 feet are also available.
SENSOR TYPE PHOTO-FIBER-OPTIC - two-conductor electrical
with all electronics permanently encapsulated in
epoxy resin.
3000-1514 and 3000-1518 wands
3000-LX, 3000-STDX, 3000-12, -13, -14 wands
* Specifications were correct at the time of publication; however,
SWOFFER INSTRUMENTS, INC. reserves the right to change
design and operating specifications to further improve the instru-
ments at any time and without notice.
Optional Waterproof Carrying casesfor Model 3000
![Page 3: MODEL 3000 again for ‘09](https://reader033.fdocuments.us/reader033/viewer/2022042713/6266f66decfc456fd01c9258/html5/thumbnails/3.jpg)
.....
MODEL 3000 Product Description Sheet
Telescoping Wands
4 meters total length. Same as3000-1514 except each section isone meter long. Graduations aremarked every 5cm. The length ofboth the 3000-1514 and 3000-1518 rods can be increased ifneeded by adding extra sectionsof rod available as options. Theextra sections are offered with orwithout graduations. Supplied withsame equipment as the 3000-1514.
CombinationWands
Wading Wands
6/10 Depth Method Model 3000’s aredesigned to be used while wading in streamsand waterways. Use the rods to measure thestream depth then automatically place thesensor at 6/10 of the depth from the streamsurface, the best place to determine theaverage velocity of a water column in relativelyshallow water. All models include the 3000Indicator, two propeller rotor assemblies, aspare propeller, DB9 connector, operatingmanual and a storage tube for the sensorwand. Indicator-to-wand connection cablelength is five feet longer than the wading rod.Wading rods for Models 3000-12, -13, -14 arein feet & tenths and Models 3000-C80 and3000-C140 have 5cm graduations.
3000-12, quick profiling of shallow streams
12’ total length. 1” diameter, thick-walled aluminumtube graduated from the bottom up in feet and tenths.Designed to be very stable in higher flows when the2½” dia. foot is placed on the stream bed. Wandbreaks down via threaded fittings into four sections ofthree feet each. Supplied with a Top Cap, Slider,and Foot as well as the Model 3000 Indicator,instruction manual, DB9 connector, spare propeller,extra rotor assembly, AA batteries and 25’ sensorcable. Top cap contains direction pointer for usewhen sensor is not visible in deep water and theslider allows locking the sensor anywhere along theentire wand length.
Datalogging Current Meter, Flowmeter
3000-C140to 145 cm
3000-C80to 86 cm
3000-1518 (Metric)3000-1514 (English)
3000-STDX2 to 9½’ reach(shown folded forstorage)
3000-LX, 4½’ to 19 ½’ extension
8” boom
4½’ to 19½’ extension. Sameas the 3000-STDX excepteach telescoping section is 4feet in length. A three footadjustable depth probe isprovided. Telescopingsections are secured byreadily available stainlesssteel hose clamps formaximum reliability and easeof maintenance.The Model 3000-LX includesthe 3000 Indicator, twopropeller rotor assemblies,spare propeller, DB9 connec-tor, instruction manual andstorage tube for the sensorwand.
3000-LX2½’ to 9½’ telescoping extensionwand with no graduations. Sensoris mounted on an 8” boom to reachinto side sewers. A 2” boom is alsoavailable for stability in higher flowsand easier access through smallopenings in pipes. A two footadjustable depth probe is providedand attaches to the fully extendedlower section. The depth probeallows repeated accurate sensorplacement indexed from the streambed. The 3000-STDX includes theModel 3000 Indicator, two propellerrotor assemblies, spare propeller,DB9 connector, operating instruc-tions and a storage tube for sensorwand. Cable is 5’ longer than themaximum extension.
3000-STDX
30pics08
3000-LX at work
3000-1514
3000-12, -13, -14, -C80, -C140
3000-13to 3.7 ft
3000-14to 4.7 ft.
3000-12to 2.7 ft
![Page 4: MODEL 3000 again for ‘09](https://reader033.fdocuments.us/reader033/viewer/2022042713/6266f66decfc456fd01c9258/html5/thumbnails/4.jpg)
Pelican® is a registered trademark of Pelican Products Inc., Torrance, California.
The Model 3000 Indicator is a datalogging version of the time proven Model 2100. The 3000 allows the operator to input and store measure-ment data usually hand written to a clipboard while profiling streams for discharge measurement. The Model 3000 can record depths,widths, velocities and angles along with time & date of measurements. It holds 1000 “Stations” in any combination of 1 to 100 “Transects”
or “Sections”. It can figure the “Q” (total discharge) and upload all the information in spreadsheet-acceptable format to your PC for further study and record keeping.
You can set the sampling (or averaging) time anywhere from 1 to 999 seconds and true averages can beattained by adding any single reading to multiple successive readings.
The 3000 Indicator is fully compatible with all previous sensors so it can also be purchased separately toupdate earlier Swoffer instruments. It can also be used with the USGS “Price Type” AA & Pygmy currentmeters, with or without the Swoffer-designed Model 2200 optical retrofit.
Calibration ratings for up to 5 different sensors (PROPS on the indicator keypad) are stored in the Model3000 plus calibrations for AA and Pygmy meters using either the Swoffer Model 2200 optical retrofits or themagnetic head contacts. An easy self-calibration feature enables you to check operation of the instru-ment while in the field and all calibration data may be edited if needed. The Indicator powers the sensoronly when it is required for a measurement so batteries last longer. The onboard clock can be set anytimeand remains in operation even after shutdown. And, if you forget to turn the Model 3000 off, it doesn’t.After 20 minutes of inactivity it automatically shuts itself off. Powered by four AA batteries, the Model3000 instruments are very light weight and easy to use even all day in the field.
MODEL 3000 FLOWMETER - DATALOGGER
For more compete descriptions and prices see the separate specification and price sheets.
All Model 3000 instruments are supplied with four AA alkaline batteries, two complete rotor assemblies(2100-A21), a spare propeller, the 3000 Datalogging Digital Indicator with a neck strap and a Sensor (2100-A22).The sensor wands are shipped in a PVC tube which serves as a permanent carrying/storage case.
The basic principle of the Swoffer sensor is simple; multiple bundles of fiber-optics, assembled into a propeller-driven rotor, gate a beam of infraredlight from a photo diode to a photo-sensitive transistor. The rate of rotation of the propeller rotor is directly proportional to water speed, therefore,pulses produced by the photo transistor over a given time are also directly proportional to water velocity.
The Model 3000 uses a propeller rotor which requires very little energy to activate, works in nearly all water conditions and producesconsistent, strong output pulses even at low speeds. The calibration curve for the rotors is linear and consistent in all normally occurringopen channel velocities. The propellers used with the Model 3000 were specifically designed for use in water so they do not need a shroudto protect them from the effects of turbulence. Because no shroud is used the propellers are better able to shed debris normally found insewers and natural streams.
The electronic half of the sensor consists of the latest opto-electronics and is epoxy encapsulated in a ½” (12.7mm) diameter acetal resinhousing for protection from chemicals and the elements. The sensor uses a two-wire signal system requiring as little as 3 volts for operationand can generate an output signal through over 1000 feet of cable. The sensor consumes very little power, produces four pulses perrevolution and can be manufactured in a variety of configurations and, most of all, it is sturdy and reliable.
The standard version of the propeller rotor assembly (2100-A21) uses a very low friction fiberoptic rotor, a polished and hardened stainlesssteel shaft, and a glass-filled nylon propeller. All rotor parts are easily replaceable in the field and spares are provided with every Model3000 instrument.
OPTIONS AND ACCESSORIES
2100-151-Slider foruse on any 1” rods.
2100-TSR Adapter forusing optical sensor on aUSGS style wading rod
Foot, Slider, Top Cap, 25’ sensor andRotors and parts. Common to the3000-1514 & -1518 models.
THE SWOFFER OPTICAL-ELECTRONIC SENSOR
3.170"
1.975"
0.500
2100-A22
2100-A21
2100-A232100-A25
2100-A26
2100-A27
2100-Prop
Left - Pelican 1200 carrying case with a 2100Indicator and two rotor assemblies. Right -Pelican 1450 with a 3000 Indicator, 25’ sensor andcable and 1inch tube accessories.